Transmit flags. Bit 0 - truncate. If this bit is set, then attempts to send a frame stop when the total valid per-rate attempts have been exhausted, otherwise, and also in the case the feature is not supported by WHA layer, transmissions will continue at the lowest available rate until the appropriate one of the iShortRetryLimit, iLongRetryLimit, dot11MaxTransmitMsduLifetime, is exhausted. [optional] Bit 1 - indicates if the preamble override from the rate class should be used in transmit. [optional] Bit 2 - defines the type of preamble to be used by the rate class. 0 means long preamble and 1 means short preamble. [optional]

802.11 LongRetryLimit used in the rate class

802.11 ShortRetryLimit used in the rate class

Number of attempts to tx at 1 Mbits/s

Number of attempts to tx at 11 Mbits/s

Number of attempts to tx at 12 Mbits/s

Number of attempts to tx at 18 Mbits/s

Number of attempts to tx at 2 Mbits/s

Number of attempts to tx at 22 Mbits/s

Number of attempts to tx at 24 Mbits/s

Number of attempts to tx at 33 Mbits/s

Number of attempts to tx at 36 Mbits/s

Number of attempts to tx at 48 Mbits/s

Number of attempts to tx at 54 Mbits/s

Number of attempts to tx at 5.5 Mbits/s

Number of attempts to tx at 6 Mbits/s

Number of attempts to tx at 9 Mbits/s