| const TUint32 | KBTHspSupported |
CenRep key for storing Bluetooth feature settings. Indicates if Bluetooth Headset Profile is supported or not.
Possible integer values: 0 Headset Profile not supported 1 Headset Profile supported
Default value: 1
| const TUint32 | KBTEnabledInOffline |
CenRep key for storing Bluetooth feature settings. Product specific settings for activating BT in offline mode.
Possible integer values: 0 BT activation disabled in offline mode 1 BT activation enabled in offline mode
Default value: 1
| const TUint32 | KBTEScoSupportedLV |
CenRep key for storing Bluetooth feature settings. Indicates if eSCO is supported.
Possible integer values: 0 eSCO not supported 1 eSCO not supported
Default value: 0
| const TUint32 | KBTOutbandDeviceSelectionLV |
CenRep key for storing Bluetooth feature settings. Indicates if device selection/passkey setting by means other than user input is enabled.
Possible integer values: 0 Out-of-band setting is disabled 1 Out-of-band setting is enabled
Default value: 0
| const TUint32 | KBTVendorID |
CenRep key for storing Bluetooth feature settings. Stores the Bluetooth Vendor ID.
The integer value is specified by the Bluetooth SIG, and used for the Device Identification Profile. It needs to be pre-set by each product.
| const TUint32 | KBTProductID |
CenRep key for storing Bluetooth feature settings. Stores the Bluetooth Product ID.
The integer value is used for the Device Identification Profile. It is product-specific, and the values are managed by the company (as identified by the Vendor ID) It needs to be pre-set by each product.
| const TUint32 | KBTAvrcpVolCTLV |
CenRep key for storing Bluetooth feature settings. Indicates if supports remote volume control over AVRCP Controller.
Possible integer values: 0 not supported 1 supported
Default value: 1
| const TUint32 | KBTAvrcpLegacyVolCTLV |
CenRep key for storing Bluetooth feature settings. Indicates if supports legacy remote volume control over AVRCP Controller.
Possible integer values: 0 not supported 1 supported
Default value: 0
| const TUint32 | KLCReceiveFolder |
CenRep key for default folder for file receiving. Indicates where receving files will be saved.
Default value: Received files\
| const TUint32 | KBTDisconnectIfAudioOpenFailsLV |
CenRep key for storing Bluetooth feature settings. Indicates support of automatic disconnection when audio link opening fails
Possible integer values: 0 disabled; 1 enabled.
Default value: 1 in S60 3.2, and 0 since S60 5.0
| const TUid | KCRUidBluetoothLocalDeviceAddress |
Bluetooth Local Device Address CenRep UID
| const TUint32 | KBTLocalDeviceAddress |
CenRep key for storing the Bluetooth local device address.
Default value (in string format): ""
Copyright ©2010 Nokia Corporation and/or its subsidiary(-ies).
All rights
reserved. Unless otherwise stated, these materials are provided under the terms of the Eclipse Public License
v1.0.