// Copyright (c) 2003-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// which accompanies this distribution, and is available

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

#ifndef __DEVVIDEOCONSTANTS_H__

#define __DEVVIDEOCONSTANTS_H__

#include <e32base.h>

#include <mmf/devvideo/devvideoplugininterfaceuids.hrh>

#include <mm/conversioncoefficient.h>

/**

DevVideo Panic Category

@publishedAll

@released

*/

_LIT(KDevVideoPanicCategory, "DevVideo");

/**

DevVideo Panic Codes

@publishedAll

@released

*/

enum TDevVideoPanicCodes

	{

	/**

	A pre-condition on a method has been violated.

	*/

	EDevVideoPanicPreConditionViolation = 1,

	/**

	A post-condition on a method has been violated.

	*/

	EDevVideoPanicPostConditionViolation = 2,

	/**

	An invalid hardware device ID has been supplied.

	*/

	EDevVideoPanicInvalidHwDeviceId = 3

	};

// DevVideo Plugin Interface UIDs

/** Video Decoder HW Device Plugin Interface UID 

@publishedAll

@released

*/

const TUid KUidDevVideoDecoderHwDevice = {KUidDevVideoDecoderHwDeviceDefine};

/** Video Post Processor HW Device Plugin Interface UID

@publishedAll

@released

*/

const TUid KUidDevVideoPostProcessorHwDevice = {KUidDevVideoPostProcessorHwDeviceDefine};

/** Video Encoder HW Device Plugin Interface UID 

@publishedAll

@released

*/

const TUid KUidDevVideoEncoderHwDevice = {KUidDevVideoEncoderHwDeviceDefine};

/** Video Pre Processor HW Device Plugin Interface UID

@publishedAll

@released

*/

const TUid KUidDevVideoPreProcessorHwDevice = {KUidDevVideoPreProcessorHwDeviceDefine};

// DevVideo Custom Interface Uids

/** MMMFVideoPlayHwDeviceExtensionScanCopy Custom Interface UID

@publishedAll

@released

*/

const TUid KUidDevVideoPlayHwDeviceExtensionScanCopy = {KUidDevVideoPlayHwDeviceExScanCopyDefine};

/** 

Picture frame rate constants

Using these constants is recommended when the picture rate is known to match 

one of them, to ensure that floating point equality comparisons work as expected.

Note that the MSL video APIs currently only deal with non-interlaced frames.  For interlaced 

video, all references to the term "picture" should be considered to refer to complete frames. 

As such, the term "picture rate" here refers to the frame rate for interlaced video.

@publishedAll

@released

*/

const TReal KPictureRate5 = 5.0;

const TReal KPictureRate75 = 7.5;

const TReal KPictureRate10 = 10.0;

const TReal KPictureRate15 = 15.0;

const TReal KPictureRateNTSC24 = 23.97602397602398; // == 24000/1001

const TReal KPictureRate25 = 25.0;

const TReal KPictureRateNTSC30 = 29.97002997002997; // == 30000/1001

const TReal KPictureRate30 = 30.0;

/**

Specifies the data format used for an uncompressed picture. 

The values are bit patterns that can be combined with other format definition constants.

@publishedAll

@released

*/

enum TImageDataFormat

	{

	/** Raw RGB picture data in a memory area.

	*/

	ERgbRawData		= 0x01000000,

	/** RGB picture data stored in a Symbian OS CFbsBitmap object.

	*/

	ERgbFbsBitmap	  = 0x02000000,

	/** Raw YUV picture data stored in a memory area. The data storage 

	format depends on the YUV sampling pattern and data layout used.

	*/

	};

/**

RGB uncompressed image format alternatives.

@publishedAll

@released

*/

enum TRgbFormat 

	{

	/**

	16-bit RGB data format with four pixels per component. 

	The data format is the same as used in Symbian EColor4K bitmaps, 

	with each pixel using two bytes with the bit layout [ggggbbbb xxxxrrrr]

	where "x" indicates unused bits. (This corresponds to "XRGB" 16-bit little-endian halfwords)

	*/

	ERgb16bit444	   = ERgbRawData   | 0x00000001,

	/**

	16-bit RGB data format with five bits per component for red and blue and 

	six bits for green. The data format is the same as used in Symbian EColor64K bitmaps, 

	with each pixel using two bytes with the bit layout [gggbbbbb rrrrrggg]

	(This corresponds to "RGB" 16-bit little-endian halfwords)

	*/

	ERgb16bit565	   = ERgbRawData   | 0x00000002,

	/**

	32-bit RGB data format with eight bits per component. 

	This data format is the same as is used in Symbian EColor16MU bitmaps. The bit layout is

	[bbbbbbbb gggggggg rrrrrrrr xxxxxxxx] where "x" indicates unused bits. 

	(This corresponds to "XRGB" 32-bit little-endian words)

	*/

	ERgb32bit888	   = ERgbRawData   | 0x00000004,

	/**

	CFbsBitmap object with EColor4K data format.

	*/

	EFbsBitmapColor4K  = ERgbFbsBitmap | 0x00000001,

 	/**

	CFbsBitmap object with EColor64K data format.

	*/

	EFbsBitmapColor64K = ERgbFbsBitmap | 0x00000002,

	/**

	CFbsBitmap object with EColor16M data format.

	*/

	EFbsBitmapColor16M = ERgbFbsBitmap | 0x00000004,

	/**

	CFbsBitmap object with EColor16MU data format.

	*/

	EFbsBitmapColor16MU = ERgbFbsBitmap | 0x00000008

	};

/**

YUV (YCbCr) uncompressed image data sampling pattern.

@publishedAll

@released

*/

enum TYuvSamplingPattern 

	{

	/**

	4:2:0 sampling format. 4 luminance sample positions correspond to one chrominance sample position. 

	The four luminance sample positions are on the corners of a square. The chrominance sample position 

	is vertically half-way of the luminance sample positions and horizontally aligned with the left 

	side of the square. This is the MPEG-2 and the MPEG-4 Part 2 sampling pattern.

	*/

	EYuv420Chroma1 = 0x00000001,

	/**

	4:2:0 sampling format. 4 luminance sample positions correspond to one chrominance sample position. 

	The four luminance sample positions are on the corners of a square. The chrominance sample position 

	is vertically and horizontally in the middle of the luminance sample positions. This is the MPEG-1 sampling pattern.

	*/

	EYuv420Chroma2 = 0x00000002,

	/**

	4:2:0 sampling format. 4 luminance sample positions correspond to one chrominance sample position. 

	The four luminance sample positions are on the corners of a square. The chrominance sample position 

	colocates with the top-left corner of the square. This sampling format is one of the options in Annex E of H.264 | MPEG-4 AVC.

	*/

	EYuv420Chroma3 = 0x00000004,

	/**

	4:2:2 sampling format. 2 luminance sample positions correspond to one chrominance sample position. 

	The luminance sample positions reside on the same pixel row. The chrominance sample position is co-located 

	with the left one of the luminance sample positions. This is the MPEG-2 4:2:2 sampling pattern.

	*/

	EYuv422Chroma1 = 0x00000008,

	/**

	4:2:2 sampling format. 2 luminance sample positions correspond to one chrominance sample position. 

	The luminance sample positions reside on the same pixel row. The chrominance sample position is in the 

	middle of the luminance sample positions. This is the MPEG-1 4:2:2 sampling pattern.

	*/

	EYuv422Chroma2 = 0x00000010

	};

/**

Defines the YUV data layout in a decoded picture.

@publishedAll

@released

*/

enum TYuvDataLayout

	{

	/**

	The data is stored in a plane mode. The memory buffer contains first all Y component 

	data for the whole picture, followed by U and V, making the data format Y00Y01Y02Y03...U0...V0... 

	For YUV 4:2:0 data, this is the same data format as EFormatYUV420Planar in the Onboard Camera API

	*/

	EYuvDataPlanar		= 0x00000001,

	/**

	The data is stored interleaved mode, all components interleaved in a single memory block. 

	Interleaved layout is only supported for YUV 4:2:2 data. The data byte order is Y1VY0U, 

	corresponding to "UY0VY1" little-endian 32-bit words. 

	This is the same data format as EFormatYUV422Reversed in the Onboard Camera API

	*/

	EYuvDataInterleavedLE = 0x00000002,

	/**

	The data is stored interleaved mode, all components interleaved in a single memory block. 

	Interleaved layout is only supported for YUV 4:2:2 data. The data byte order is UY0VY1, 

	corresponding to "UY0VY1" big-endian 32-bit words. 

	This is the same data format as EFormatYUV422 in the Onboard Camera API

	*/

	EYuvDataInterleavedBE = 0x00000004,

	/**

	The data is stored in a semi-planar mode. The memory buffer contains first all Y component 

	data for the whole picture, followed by U and V components, which are interlaced, making the data 

	format Y00Y01Y02Y03...U0V0U1V1... For YUV 4:2:0 data, this is the same data format as 

	FormatYUV420SemiPlanar in the Onboard Camera API

	*/

	EYuvDataSemiPlanar = 0x00000008

	};

/**

Defines the picture effect used for an input picture. Please refer to ITU-T H.264 | ISO/IEC MPEG-4 AVC [] for the definitions of the transition effects.

@publishedAll

@released

*/

enum TPictureEffect

	{

	/**

	No effect.

	*/

	EEffectNone          					= 0x00000001,

	/**

	Fade from black.

	*/

	EEffectFadeFromBlack 					= 0x00000002,

	/**

	Fade to black.

	*/

	EEffectFadeToBlack   					= 0x00000004,

	/**

	Unspecified transition from or to constant colour.

	*/

	EEffectUnspecifiedThroughConstantColor 	= 0x00000008,

	/**

	Dissolve.

	*/

	EEffectDissolve   						= 0x00000010,

	/**

	Wipe.

	*/

	EEffectWipe   							= 0x00000020,

	/**

	Unspecified mixture of two scenes.

	*/

	EEffectUnspecifiedMixOfTwoScenes  		= 0x00000040

	};

/**

Defines the data value range used for RGB data. Used for determining the correct color space conversion factors. 

@publishedAll

@released

*/

enum TRgbRange

	{

	/**

	The RGB data uses the full 8-bit range of [0…255].

	*/

	ERgbRangeFull	= 0x00000001,

	/**

	The RGB data uses the nominal range of [16…235]. Individual samples can still contain 

	values beyond that range, the rest of the 8-bit range is used for headroom and footroom.

	*/

	ERgbRange16to235 = 0x00000002

	};

/**

Defines possible data unit types for encoded video data. The data unit types are used both 

for encoded video input for playback as well as encoded video output from recording.

@publishedAll

@released

*/

enum TVideoDataUnitType

	{

	/**

	Each data unit is a single coded picture.

	*/

	EDuCodedPicture		   = 0x00000001,

	/**

	Each data unit is a coded video segment.  

	A coded video segment is a part of the coded video data that forms an independently 

	decodable part of a coded video frame. For example, a video packet in MPEG-4 Part 2 

	and slice in H.263 are coded video segments.

	*/

	EDuVideoSegment		   = 0x00000002,

	/**

	Each data unit contains an integer number of video segments consecutive in decoding order, 

	possibly more than one. The video segments shall be a subset of one coded picture.

	*/

	EDuSeveralSegments		= 0x00000004,

	/**

	Each data unit contains a piece of raw video bitstream, not necessarily aligned at any headers. 

	The data must be written in decoding order. This data unit type can be used for playback if the client 

	does not have information about the bitstream syntax, and just writes data in random-sized chunks. For 

	recording this data unit type is useful if the client can handle arbitrarily split data units, giving the

	encoder maximum flexibility in buffer allocation. For encoded data output, each data unit must still 

	belong to exactly one output picture.

	*/

	EDuArbitraryStreamSection = 0x00000008

	};

/**

Defines possible encapsulation types for coded video data units. The encapsulation information is 

used both for encoded video input for playback as well as encoded video output from recording.

@publishedAll

@released

*/

enum TVideoDataUnitEncapsulation

	{

	/**

	The coded data units can be chained in a bitstream that can be decoded. For example, MPEG-4 

	Part 2 elementary streams, H.263 bitstreams, and H.264 | MPEG-4 AVC Annex B bitstreams fall into this category.

	*/

	EDuElementaryStream = 0x00010000,

	/**

	The coded data units are encapsulated in a general-purpose packet payload format whose coded 

	data units can be decoded independently but cannot be generally chained into a bitstream. 

	For example, the Network Abstraction Layer Units of H.264 | MPEG-4 AVC fall into this category. 

	*/

	EDuGenericPayload   = 0x00020000,

	/**

	The coded data units are encapsulated in RTP packet payload format. The RTP payload header 

	may contain codec-specific items, such as a redundant copy of a picture header in the H.263 

	payload specification RFC2429.

	*/

	EDuRtpPayload	   = 0x00040000

	};

/**

Defines the HRD/VBV specification used in a stream.

@publishedAll

@released

*/

enum THrdVbvSpecification

	{

	/** No HRD/VBV specification. */

	EHrdVbvNone		   = 0x00000001,

	/** The HRD/VBV specification in the corresponding coding standard. */

	EHrdVbvCodingStandard = 0x00000002,

	/** Annex G of 3GPP TS 26.234 Release 5. */

	EHrdVbv3GPP		   = 0x00000004

	};

/**

Defines the pre-processor and post-processor types available in the system. 

One pre-processor or post-processor can implement multiple operations simultaneously, and thus the 

types are defined as bit values that can be combined as a bitfield.

@publishedAll

@released

*/

enum TPrePostProcessType

	{

	/**

	Input cropping, used for pan-scan cropping in video playback and digital zoom in video recording. 

	Pan-scan cropping is useful, for example, for displaying arbitrary-sized pictures with codecs that 

	only support image dimensions that are multiples of 16 pixels.

	*/

	EPpInputCrop =		0x00000001,

	/**

	Horizontal mirroring, flips the image data around a vertical line in its center.

	*/

	EPpMirror =		   0x00000002,

	/**

	Picture rotation, supports rotation by 90 or 180 degrees, clockwise and anticlockwise.

	*/

	EPpRotate =		   0x00000004,

	/**

	Picture scaling to a new size, includes both upscaling and downscaling. 

	The supported scaling types and scale factors depend on the pixel processor.

	*/

	EPpScale =			0x00000008,

	/**

	Crops the picture to a final output rectangle.

	*/

	EPpOutputCrop =	   0x00000010,

	/**

	Pads the output picture to a defined size. Used in video recording to pad pictures to 

	suit the encoder input requirements.

	*/

	EPpOutputPad =		0x00000020,

	/**

	YUV to RGB color space conversion. Supported only for video playback.

	*/

	EPpYuvToRgb =		 0x00000040,

	/**

	RGB to YUV color space conversion. Supported only for video recording.

	*/

	EPpRgbToYuv =		 0x00000080,

	/**

	YUV to YUV data format conversion. Supported only for video recording.

	*/

	EPpYuvToYuv =		 0x00000100,

	/**

	Noise filtering. Noise filtering is typically used to enhance the input 

	picture from the camera, and is usually only supported for video recording.

	*/

	EPpNoiseFilter =	  0x00000200,

	/**

	Color enhancement.  Color enhancement is typically used to enhance the input picture 

	from the camera, and is usually only supported for video recording.

	*/

	EPpColorEnhancement = 0x00000400,

	/**

	Frame stabilisation. Supported only for video recording.

	*/

	EPpFrameStabilisation = 0x00000800,

	/**

	Deblocking is typically used to remove artefacts from the output picture that result from 

	high compression or a noisy input signal. Only supported for video playback.

	*/

    EPpDeblocking =         0x00001000,

	/**

	Deringing is typically used to remove artefacts from the output picture that result from 

	a noisy input signal corrupting motion estimates. Only supported for video playback.

	*/

    EPpDeringing =          0x00002000,

	/**

	Custom hardware device specific processing.

	*/

	EPpCustom =		   0x10000000

	};

/**

Dithering types.

@publishedAll

@released

*/

enum TDitherType

	{

	/** No dithering. */

	EDitherNone		   = 0x00000001,

	/** Ordered dither. */

	EDitherOrdered		= 0x00000002,