/*

* Copyright (c) 2008 Nokia Corporation and/or its subsidiary(-ies). 

* All rights reserved.

* This component and the accompanying materials are made available

* which accompanies this distribution, and is available

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  General properties definition file.

*

*/

#ifndef SENSRVGENERALPROPERTIES_H

#define SENSRVGENERALPROPERTIES_H

#include <e32base.h>

#include <sensrvtypes.h>

// PROPERTY TEMPLATE

/*

* The following is a template that must be used when defining new properties

*

* Property Name: Name of the property

* Property Type: Defines type of the property (TInt/TReal/TBuf)

* Scope: Defines a property scope. Property can be defined for a channel, for a specific

* item in a channel or for a sensor related to a channel.

* Mandatory: Defines is property mandatory

* Capability: Capabilities needed to set this property

* Description: Description of the property

*/

// CONSTANTS

/**

* Property Name: Data Rate

* Type:         TInt

* Scope:        Channel property

* Mandatory:    Yes

* Capability:   None

* Description:  Current data rate (Hz) of the sensor channel.

*

* A Sensor channel which supports data rates within a given range can use one Data Rate

* property. The range is defined using the property's maximum and minimum value. E.g. A

* sensor channel supports a data range from 10Hz to 100Hz and all values within this range

* are feasible. To implement this use one Data Rate property with a minimum value 10 and a

* maximum value of 100.

*

* A Sensor channel which supports discrete data rates can use the Data Rate property as

* an array. E.g. A sensor channel supports the following data rates 10Hz, 40Hz and 50Hz.

* To implement this four different Data Rate properties are needed. The following table

* shows the content of the four properties, only mandatory attributes are shown.

*

* @code

* property ID     Array index     Value           Min Value       Max Value       Read only

* -----------     -----------     -----           ---------       ---------       ---------

* 0x00000002      -2              1               0               2               EFalse

* 0x00000002      0               10              n/a             n/a             ETrue

* 0x00000002      1               40              n/a             n/a             ETrue

* 0x00000002      2               50              n/a             n/a             ETrue

* @endcode

*

* The first property (first row in table above) is the header for the property array. It

* defines that this property is an array property. The attributes of this property are:

*

* Array index:

* -2 means that the property is an array property

* Value:

* 1 means that current value of the property is defined by the property with an array index of

* 1. The value is 40Hz in this example.

* Min value

* 0 is the start index of the property array

* Max value:

* 2 is the last index of the property array

* Read only:

* EFalse means that the properties current value can be changed,

*

* In this example the possible values of the property are 0, 1, and 2 which corresponds to data

* rates of 10Hz, 40Hz and 50Hz.

*/

const TSensrvPropertyId KSensrvPropIdDataRate = 0x00000002;

/**

* Name:         Power id property

* Type:         TInt

* Scope:        Channel item property

* Mandatory:    No

* Capability:   None

* Description:  Power Property of the sensor

*               Sensor power may either be down (ESensrvPowerPowerDown) or up (ESensrvPowerPowerUp).

*               When sensor power is down, it's channels will also be unavailable.

*               When sensor power is up, any given channel provided by the sensor may either be

*               available or unavailable. The availability property represents channel's availability.

*

* @see          TSensrvPower.

* @see          KSensrvPropIdAvailability

*/

const TSensrvPropertyId KSensrvPropIdPower = 0x00000003;

/**

* Name: Availability

* Type:         TInt.

* Scope:        Channel property

* Mandatory:    Yes

* Capability:   None

* Description:  Indicates if channel is available or not. There are channels

*               supported by a sensor that cannot be opened at the same time.

*               These so called dependant channnels are managed by client priorities.

*               Availability property informs if a channel is available at the moment.

*               Also, unavailable channel can be opened or be listened by client but

*               the channel become functional after availability changes.

*               Availability property values are defined in TSensrvAvailability

*               as ESensrvAvailabilityFalse (not available) and ESensrvAvailabilityTrue

*               (available).

*

* @see          TSensrvAvailability

*/

const TSensrvPropertyId KSensrvPropIdAvailability = 0x00000004;

/**

* Name: Measure Range

* Type: TReal or TInt

* Scope: Channel item property

* Mandatory: No

* Capability: None

* Description: The measure range of the sensor channel.

*

* The channel measure range is defined by the property's maximum and minimum values. The property

* value represents the resolution of the measure range. The measure range property can also be

* an array property.

*

* Example:

*

* An accelerometer xyz axis channel has a range of +/- 2g. Therefore the property would be a single

* property, its type would be ESensrvIntProperty and its value would be 2.

*

* An orientation channel has a range of scalar integers representing the current orientation of

* the mobile:  Undefined, Up, Down, Left, Right, Upward, Downward. Therefore the property would be an

* array property (count of 8 made up of 1 header + 7 scalar values), its type would be

* ESensrvIntProperty and the values of each member of the array would be one of the scalar values

* above. For an example of an array property see KSensrvPropIdDataRate.

*

* A rotation channel has a range of 0-360 degrees. Therefore the property would be an array property

* (count of 3 made up of 1 header + 1 min value + 1 max value), its type would be ESensrvIntProperty

* and the values of each member of the array would be 0 and 360.

*

* The sensor specific channel header file for each channel found in epoc32\include\sensors\channels

* will define the exact content of this property.

*

* @see ESensrvIntProperty

* @see TSensrvArrayIndex

* @see KSensrvPropIdDataRate

*/

const TSensrvPropertyId KSensrvPropIdMeasureRange = 0x00000005;

/**

* Name: Format of the channel data

* Type: TInt, see possible values from TSensrvChannelDataFormat

* Scope: Channel item property

* Mandatory: Yes

* Capability: None

* Description: A format which is used to present a data value.

*

* @see TSensrvChannelDataFormat

*/

const TSensrvPropertyId KSensrvPropIdChannelDataFormat = 0x000000006;

/**

* Name:        Data item scaled range

* Type:        TInt.

* Scope:       Channel item property

* Mandatory:   No

* Capability:  None

* Description: If the channel data is scaled it represents the scale of the returned data.

*

* The property value represents the minimum and maximum values of the scaled range. This property

* should is used when the KSensrvPropIdChannelDataFormat property value is ESensrvFormatScaled.

*

* Example:

*

* An accelerometer xyz axis channel has a scaled range of -128 to 127. Therefore the property would

* be an array property (count of 3 made up of 1 header + 1 min value + 1 max value), its type would

* be ESensrvIntProperty and the values of each member of the array would be -128 and 127.

*

* If the accelerometer xyz axis channel also has a measure range of +/- 2g given by

* KSensrvPropIdMeasureRange property. Then if a data value of 64 is read on one of the axis the g reading

* would be approximately +1g.

*

* Rotation and orientation channels would have KSensrvPropIdChannelDataFormat set to

* ESensrvChannelDataFormatAbsolute. Theerfore this property would not exist for these channels.

*

* The sensor specific channel header file for each channel found in epoc32\include\sensors\channels

* will define the exact content of this property.

*

* @see KSensrvPropIdChannelDataFormat

* @see KSensrvPropIdMeasureRange

*/

const TSensrvPropertyId KSensrvPropIdScaledRange = 0x000000007;

/**

* Name: Accuracy of the channel data

* Type: TReal

* Scope: Channel item property

* Mandatory: No

* Capability: None

* Description: The property value is the accuracy of the channel

*

* Example:

*

* An accelerometer xyz axis channel has an accuracy of +/-2mg. Therefore the property would be a

* single property, its type would be ESensrvIntProperty and its value would be 2.

*

* An orientation channel has a range of scalar integers representing the current orientation of

* the mobile and therefore has no accuracy associated with it. Therefore this property will not

* exist for this channel.

*

* A rotation channel has an accuracy of the nearest 15 degrees. Therefore the property would be

* a single property, its type would be ESensrvIntProperty and its value would be 15.

*

* The sensor specific channel header file for each channel found in epoc32\include\sensors\channels

* will define the exact content of this property.

*

* @see ESensrvIntProperty

*/

const TSensrvPropertyId KSensrvPropIdChannelAccuracy = 0x000000008;

/**

* Name: Channel Data Scale

* Type: TInt

* Scope: Channel item property

* Mandatory: Mandatory when KSensrvPropIdChannelDataFormat is set to ESensrvFormatGeneral

* Capability: None

* Description: The property value is the scale used for the measurement provided by this channel.

*

* The scale can be used as a substitute for prefixing the unit. The scale is expressed as an

* exponent of ten. If no scaling is needed, the scale MUST be zero.

*

* Either the unit or data values can be altered by the scaling factor. If, for example, the

* unit is meter and the scale is -3, either the unit can be interpreted as "mm" or the data

* value can be mulitplied by 10^(scale). i.e For a unit of Meter, a scale of -3 and a value of

* 10 the value canbe interpreted as either 10mm, or 0.01 Meter

*

* If the data type of the channel is int this results in a fixed-point representation in which

* the number of decimal places always remains the same. Using a fixed-point representation can

* have a favorable effect on performance. With floating point data type, the scaling factor is

* often used for convenience. With either very small, or very large values the presentation can

* be more readable when the values are presented in moderate numbers.

*

* Channel data values and the KSensrvMeasureRange property must be represented using the same

* scale.

*

* @see KSensrvPropIdChannelDataFormat

*/

const TSensrvPropertyId KSensrvPropIdChannelScale = 0x000000009;

/**

* Name: Channel item unit

* Type: TInt, see possible values from TSensrvChannelUnit

* Scope: Channel item property

* Mandatory: No

* Capability: None

* Description:  The property value is the unit, in which data values are presented.

*

* The recommended units are listed in TSensrvChannelUnit.

*

* @see TSensrvChannelUnit

*/

const TSensrvPropertyId KSensrvPropIdChannelUnit = 0x0000000010;

/**

* Name:         Sensor model

* Type:         Buffer

* Scope:        Sensor property

* Mandatory:    No

* Capability:   None

* Description: The property value is a sensor model description

*/

const TSensrvPropertyId KSensrvSensorModel = 0x0000000011;

/**

* Name:         Sensor connection type

* Type:         TInt.

* Scope:        Sensor property

* Mandatory:    No

* Capability:   None

* Description: Defines sensor connection type

*

* @see TSensrvConnectionType

*/

const TSensrvPropertyId KSensrvSensorConnectionType = 0x0000000012;

/**

* Name: Sensor description

* Type: Buffer

* Scope: Sensor property

* Mandatory: No

* Capability: None

* Description: The property value is a short description of the sensor

*

* If required this property can be used to hold a long description (>20 characters) of the sensor

* by making it an array property. Each member of the array can hold part of the longer description.

* Any framework client retrieving the property can then concatenate parts to make the full

* description. The sensor specific headers found in epoc32\include\sensors\channels will define

* whether this is a single property or an array property.

*/

const TSensrvPropertyId KSensrvSensorDescription = 0x0000000013;

/**

* - Name:         Compensation type of channel data

* - Type:         TInt, see possible values from TSensorCompensationType 

*                 enumeration declared in sensordatacompensationtypes.h.

* - Scope:        Channel property

* - Mandatory:    No   

* - Capability:   None

* - Description:  Indicates channel data compensation type.

*/

const TSensrvPropertyId KSensrvPropIdChannelDataCompensation = 0x0000000014;

#endif //SENSRVGENERALPROPERTIES_H

// End of File