--- a/epoc32/include/libc/arpa/telnet.h Tue Nov 24 13:55:44 2009 +0000
+++ b/epoc32/include/libc/arpa/telnet.h Tue Mar 16 16:12:26 2010 +0000
@@ -1,1 +1,353 @@
-telnet.h
+/* TELNET.H
+ *
+ * Portions copyright (c) 1993-1999 Symbian Ltd. All rights reserved.
+ */
+
+/** @file
+@publishedAll
+@released
+*/
+
+/*
+ * Copyright (c) 1983, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)telnet.h 8.2 (Berkeley) 12/15/93
+ */
+
+#ifndef _ARPA_TELNET_H_
+#define _ARPA_TELNET_H_
+
+/**
+Definitions for the TELNET protocol.
+*/
+#define IAC 255 /* interpret as command: */
+#define DONT 254 /* you are not to use option */
+#define DO 253 /* please, you use option */
+#define WONT 252 /* I won't use option */
+#define WILL 251 /* I will use option */
+#define SB 250 /* interpret as subnegotiation */
+#define GA 249 /* you may reverse the line */
+#define EL 248 /* erase the current line */
+#define EC 247 /* erase the current character */
+#define AYT 246 /* are you there */
+#define AO 245 /* abort output--but let prog finish */
+#define IP 244 /* interrupt process--permanently */
+#define BREAK 243 /* break */
+#define DM 242 /* data mark--for connect. cleaning */
+#define NOP 241 /* nop */
+#define SE 240 /* end sub negotiation */
+#define EOR 239 /* end of record (transparent mode) */
+#define ABORT 238 /* Abort process */
+#define SUSP 237 /* Suspend process */
+#define xEOF 236 /* End of file: EOF is already used... */
+
+#define SYNCH 242 /* for telfunc calls */
+
+#ifdef TELCMDS
+char *telcmds[] = {
+ "EOF", "SUSP", "ABORT", "EOR",
+ "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
+ "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC",
+ 0
+};
+#else
+extern char *telcmds[];
+#endif
+
+#define TELCMD_FIRST xEOF
+#define TELCMD_LAST IAC
+#define TELCMD_OK(x) ((unsigned int)(x) <= TELCMD_LAST && \
+ (unsigned int)(x) >= TELCMD_FIRST)
+#define TELCMD(x) telcmds[(x)-TELCMD_FIRST]
+
+/**
+telnet options
+*/
+#define TELOPT_BINARY 0 /* 8-bit data path */
+#define TELOPT_ECHO 1 /* echo */
+#define TELOPT_RCP 2 /* prepare to reconnect */
+#define TELOPT_SGA 3 /* suppress go ahead */
+#define TELOPT_NAMS 4 /* approximate message size */
+#define TELOPT_STATUS 5 /* give status */
+#define TELOPT_TM 6 /* timing mark */
+#define TELOPT_RCTE 7 /* remote controlled transmission and echo */
+#define TELOPT_NAOL 8 /* negotiate about output line width */
+#define TELOPT_NAOP 9 /* negotiate about output page size */
+#define TELOPT_NAOCRD 10 /* negotiate about CR disposition */
+#define TELOPT_NAOHTS 11 /* negotiate about horizontal tabstops */
+#define TELOPT_NAOHTD 12 /* negotiate about horizontal tab disposition */
+#define TELOPT_NAOFFD 13 /* negotiate about formfeed disposition */
+#define TELOPT_NAOVTS 14 /* negotiate about vertical tab stops */
+#define TELOPT_NAOVTD 15 /* negotiate about vertical tab disposition */
+#define TELOPT_NAOLFD 16 /* negotiate about output LF disposition */
+#define TELOPT_XASCII 17 /* extended ascic character set */
+#define TELOPT_LOGOUT 18 /* force logout */
+#define TELOPT_BM 19 /* byte macro */
+#define TELOPT_DET 20 /* data entry terminal */
+#define TELOPT_SUPDUP 21 /* supdup protocol */
+#define TELOPT_SUPDUPOUTPUT 22 /* supdup output */
+#define TELOPT_SNDLOC 23 /* send location */
+#define TELOPT_TTYPE 24 /* terminal type */
+#define TELOPT_EOR 25 /* end or record */
+#define TELOPT_TUID 26 /* TACACS user identification */
+#define TELOPT_OUTMRK 27 /* output marking */
+#define TELOPT_TTYLOC 28 /* terminal location number */
+#define TELOPT_3270REGIME 29 /* 3270 regime */
+#define TELOPT_X3PAD 30 /* X.3 PAD */
+#define TELOPT_NAWS 31 /* window size */
+#define TELOPT_TSPEED 32 /* terminal speed */
+#define TELOPT_LFLOW 33 /* remote flow control */
+#define TELOPT_LINEMODE 34 /* Linemode option */
+#define TELOPT_XDISPLOC 35 /* X Display Location */
+#define TELOPT_OLD_ENVIRON 36 /* Old - Environment variables */
+#define TELOPT_AUTHENTICATION 37/* Authenticate */
+#define TELOPT_ENCRYPT 38 /* Encryption option */
+#define TELOPT_NEW_ENVIRON 39 /* New - Environment variables */
+#define TELOPT_EXOPL 255 /* extended-options-list */
+
+#define NTELOPTS (1+TELOPT_NEW_ENVIRON)
+#ifdef TELOPTS
+char *telopts[NTELOPTS+1] = {
+ "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
+ "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",
+ "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS",
+ "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO",
+ "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT",
+ "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD",
+ "TACACS UID", "OUTPUT MARKING", "TTYLOC",
+ "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW",
+ "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION",
+ "ENCRYPT", "NEW-ENVIRON",
+ 0
+};
+
+#define TELOPT_FIRST TELOPT_BINARY
+#define TELOPT_LAST TELOPT_NEW_ENVIRON
+#define TELOPT_OK(x) ((unsigned int)(x) <= TELOPT_LAST)
+#define TELOPT(x) telopts[(x)-TELOPT_FIRST]
+#endif
+
+/**
+sub-option qualifiers
+*/
+#define TELQUAL_IS 0 /* option is... */
+#define TELQUAL_SEND 1 /* send option */
+#define TELQUAL_INFO 2 /* ENVIRON: informational version of IS */
+#define TELQUAL_REPLY 2 /* AUTHENTICATION: client version of IS */
+#define TELQUAL_NAME 3 /* AUTHENTICATION: client version of IS */
+
+#define LFLOW_OFF 0 /* Disable remote flow control */
+#define LFLOW_ON 1 /* Enable remote flow control */
+#define LFLOW_RESTART_ANY 2 /* Restart output on any char */
+#define LFLOW_RESTART_XON 3 /* Restart output only on XON */
+
+/**
+LINEMODE suboptions
+*/
+#define LM_MODE 1
+#define LM_FORWARDMASK 2
+#define LM_SLC 3
+
+#define MODE_EDIT 0x01
+#define MODE_TRAPSIG 0x02
+#define MODE_ACK 0x04
+#define MODE_SOFT_TAB 0x08
+#define MODE_LIT_ECHO 0x10
+
+#define MODE_MASK 0x1f
+
+/**
+Not part of protocol, but needed to simplify things...
+*/
+#define MODE_FLOW 0x0100
+#define MODE_ECHO 0x0200
+#define MODE_INBIN 0x0400
+#define MODE_OUTBIN 0x0800
+#define MODE_FORCE 0x1000
+
+#define SLC_SYNCH 1
+#define SLC_BRK 2
+#define SLC_IP 3
+#define SLC_AO 4
+#define SLC_AYT 5
+#define SLC_EOR 6
+#define SLC_ABORT 7
+#define SLC_EOF 8
+#define SLC_SUSP 9
+#define SLC_EC 10
+#define SLC_EL 11
+#define SLC_EW 12
+#define SLC_RP 13
+#define SLC_LNEXT 14
+#define SLC_XON 15
+#define SLC_XOFF 16
+#define SLC_FORW1 17
+#define SLC_FORW2 18
+#define SLC_MCL 19
+#define SLC_MCR 20
+#define SLC_MCWL 21
+#define SLC_MCWR 22
+#define SLC_MCBOL 23
+#define SLC_MCEOL 24
+#define SLC_INSRT 25
+#define SLC_OVER 26
+#define SLC_ECR 27
+#define SLC_EWR 28
+#define SLC_EBOL 29
+#define SLC_EEOL 30
+
+#define NSLC 30
+
+/**
+For backwards compatability, we define SLC_NAMES to be the
+list of names if SLC_NAMES is not defined.
+*/
+#define SLC_NAMELIST "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \
+ "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \
+ "LNEXT", "XON", "XOFF", "FORW1", "FORW2", \
+ "MCL", "MCR", "MCWL", "MCWR", "MCBOL", \
+ "MCEOL", "INSRT", "OVER", "ECR", "EWR", \
+ "EBOL", "EEOL", \
+ 0
+
+#ifdef SLC_NAMES
+char *slc_names[] = {
+ SLC_NAMELIST
+};
+#else
+extern char *slc_names[];
+#define SLC_NAMES SLC_NAMELIST
+#endif
+
+#define SLC_NAME_OK(x) ((unsigned int)(x) <= NSLC)
+#define SLC_NAME(x) slc_names[x]
+
+#define SLC_NOSUPPORT 0
+#define SLC_CANTCHANGE 1
+#define SLC_VARIABLE 2
+#define SLC_DEFAULT 3
+#define SLC_LEVELBITS 0x03
+
+#define SLC_FUNC 0
+#define SLC_FLAGS 1
+#define SLC_VALUE 2
+
+#define SLC_ACK 0x80
+#define SLC_FLUSHIN 0x40
+#define SLC_FLUSHOUT 0x20
+
+#define OLD_ENV_VAR 1
+#define OLD_ENV_VALUE 0
+#define NEW_ENV_VAR 0
+#define NEW_ENV_VALUE 1
+#define ENV_ESC 2
+#define ENV_USERVAR 3
+
+/*
+ * AUTHENTICATION suboptions
+ */
+
+/**
+Who is authenticating who ...
+*/
+#define AUTH_WHO_CLIENT 0 /* Client authenticating server */
+#define AUTH_WHO_SERVER 1 /* Server authenticating client */
+#define AUTH_WHO_MASK 1
+
+/**
+amount of authentication done
+*/
+#define AUTH_HOW_ONE_WAY 0
+#define AUTH_HOW_MUTUAL 2
+#define AUTH_HOW_MASK 2
+
+#define AUTHTYPE_NULL 0
+#define AUTHTYPE_KERBEROS_V4 1
+#define AUTHTYPE_KERBEROS_V5 2
+#define AUTHTYPE_SPX 3
+#define AUTHTYPE_MINK 4
+#define AUTHTYPE_CNT 5
+
+#define AUTHTYPE_TEST 99
+
+#ifdef AUTH_NAMES
+char *authtype_names[] = {
+ "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK",
+ 0
+};
+#else
+extern char *authtype_names[];
+#endif
+
+#define AUTHTYPE_NAME_OK(x) ((unsigned int)(x) < AUTHTYPE_CNT)
+#define AUTHTYPE_NAME(x) authtype_names[x]
+
+/**
+ENCRYPTion suboptions
+*/
+#define ENCRYPT_IS 0 /* I pick encryption type ... */
+#define ENCRYPT_SUPPORT 1 /* I support encryption types ... */
+#define ENCRYPT_REPLY 2 /* Initial setup response */
+#define ENCRYPT_START 3 /* Am starting to send encrypted */
+#define ENCRYPT_END 4 /* Am ending encrypted */
+#define ENCRYPT_REQSTART 5 /* Request you start encrypting */
+#define ENCRYPT_REQEND 6 /* Request you end encrypting */
+#define ENCRYPT_ENC_KEYID 7
+#define ENCRYPT_DEC_KEYID 8
+#define ENCRYPT_CNT 9
+#define ENCTYPE_ANY 0
+#define ENCTYPE_DES_CFB64 1
+#define ENCTYPE_DES_OFB64 2
+#define ENCTYPE_CNT 3
+
+#ifdef ENCRYPT_NAMES
+char *encrypt_names[] = {
+ "IS", "SUPPORT", "REPLY", "START", "END",
+ "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID",
+ 0
+};
+char *enctype_names[] = {
+ "ANY", "DES_CFB64", "DES_OFB64",
+ 0
+};
+#else
+extern char *encrypt_names[];
+extern char *enctype_names[];
+#endif
+
+#define ENCRYPT_NAME_OK(x) ((unsigned int)(x) < ENCRYPT_CNT)
+#define ENCRYPT_NAME(x) encrypt_names[x]
+
+#define ENCTYPE_NAME_OK(x) ((unsigned int)(x) < ENCTYPE_CNT)
+#define ENCTYPE_NAME(x) enctype_names[x]
+
+#endif /* !_TELNET_H_ */