--- a/baseport/src/cedar/generic/base/syborg/svphostfs/fs/svphost.cpp	Fri Jul 31 15:01:17 2009 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,691 +0,0 @@
-/*
-* Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
-* All rights reserved.
-* This component and the accompanying materials are made available
-* under the terms of the License "Eclipse Public License v1.0"
-* which accompanies this distribution, and is available
-* at the URL "http://www.eclipse.org/legal/epl-v10.html".
-*
-* Initial Contributors:
-* Nokia Corporation - initial contribution.
-*
-* Contributors:
-*
-* Description: f32test\fsstress\t_remote.cpp
-*
-*/
-
-#if !defined(__F32FILE_H__)
-#include <f32file.h>
-#endif
-#if !defined(__E32TEST_H__)
-#include <e32test.h>
-#endif
-#if !defined(__T_STD_H__)
-#include "t_std.h"
-#endif
-#if !defined(__T_REMFSY_H__)
-#include "t_remfsy.h"
-#endif
-
-GLDEF_D RTest test(_L("T_REMOTE - DEFAULT DRIVE"));
-GLDEF_D RTest testx(_L("X Drive (WINS) <-> D Drive (MARM)"));
-GLDEF_D RTest testy(_L("Y Drive (WINS) <-> C Drive (MARM)"));
-GLDEF_D RTest testq(_L("REMOTE Q Drive"));
-
-LOCAL_D TFileName gBatchFile;
-LOCAL_D TBool gRunByBatch=EFalse;
-
-GLDEF_D TFileName gExeFileName(RProcess().FileName());
-
-/*
-INFORMATION - What this test is all about
-
-T_REMOTE tests the asynchronous remote file system implementation, introduced in
-F32 release 110 and refined in release 112.  The test sets up and mounts four drives,
-the default drive (usually C on WINS and MARM), a remote drive (Q) and two others, on
-MARM these are C and D, on WINS these are X and Y.  The remote filesystem is the only
-system treated asynchronously by F32.  
-
-The test sets up a thread for each drive and runs a number of tests on each drive.
-In the remote filesystem case, a dummy filesystem has been implemented, this is built
-as T_REMFSY.fsy.  The tests are designed to stress a number of fileserver API
-functions.  The test MultipleSessions() is adapted from another F32 test T_SESSION.
-It sets up an array of fileserver connections and then uses each connection to run
-a number of tests - alternating between connections to stress F32 as it does so.  The
-test should therefore be testing multiple fileserver connections on multiple drives -
-the remote filesystem running concurrently with the other drives.  There should be
-no failure or confusion between fileserver sessions.  Each drive has a separate test
-console which should complete successfully.
-
-NOTE: TO RUN THIS CARD SUCCESSFULLY ON MARM A CF CARD IS REQUIRED
-
-*/
-
-LOCAL_C void Test0(RTest& aTest)
-//
-//	Scan for open files - no sessions
-//	
-	{
-	aTest.Next(_L("Scan for open files with no sessions open"));
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-	if (list==NULL)
-		return;
-	TInt count=list->Count();
-	if (count==1)
-		{
-		gRunByBatch=ETrue;
-		gBatchFile=(*list)[0].iName;
-		delete list;
-		fileScan.NextL(list);
-		if (list==NULL)
-			return;
-		count=list->Count();
-		}
-	while (count--)
-		{
-		TEntry entry=(*list)[count];
-		aTest.Printf(_L("%d) EntryName = %S\n"),count,&entry.iName);
-		}
-	//aTest.Printf(_L("Test will fail unless files are closed.\n"));
-	//aTest.Printf(_L("Press any key ...\n"));
-	//aTest.Getch();
-	}
-
-
-LOCAL_C void Test1()	
-//
-//	This test is only called by default drive
-//	Test OpenFileScan			
-//
-	{
-	test.Next(_L("Scan for open files - one session only"));
-
-	RFile file1,file2,file3;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	TInt r=file1.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(TheFs,fn,EFileRead);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-
-	if (gRunByBatch)
-		{
-		test(list!=NULL);
-		test(list->Count()==1);
-		TEntry entry=(*list)[0];
-		test(entry.iName.FindF(_L(".BAT"))>=0);
-		delete list;
-		fileScan.NextL(list);
-		}
-
-	test(list!=NULL);
-	TInt count=list->Count();
-	test(count==3);
-	TEntry entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	TThreadId threadId=fileScan.ThreadId();
-	RThread current;
-	TThreadId currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list==NULL);
-
-	file1.Close();
-	file2.Close();
-	file3.Close();
-	}
-
-LOCAL_C void Test2()
-//
-// Test openfilescan - empty, full, empty.
-//
-	{
-	test.Next(_L("Scan for open files - empty sessions"));
-
-	RFs fs1,fs2,fs3,fs4;
-	TInt r=fs1.Connect();
-	test(r==KErrNone);
-	r=fs2.Connect();
-	test(r==KErrNone);
-	r=fs3.Connect();
-	test(r==KErrNone);
-	r=fs4.Connect();
-	test(r==KErrNone);
-
-	RFile file1,file2,file3;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file1.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(fs2,fn,EFileRead);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-
-	if (gRunByBatch)
-		{
-		test(list!=NULL);
-		test(list->Count()==1);
-		TEntry entry=(*list)[0];
-		test(entry.iName.FindF(_L(".BAT"))>=0);
-		delete list;
-		fileScan.NextL(list);
-		}
-
-	test(list!=NULL);
-	TInt count=list->Count();
-	test(count==3);
-	TEntry entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	TThreadId threadId=fileScan.ThreadId();
-	RThread current;
-	TThreadId currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list==NULL);
-
-	file1.Close();
-	file2.Close();
-	file3.Close();
-	fs1.Close();
-	fs2.Close();
-	fs3.Close();
-	fs4.Close();
-	}
-
-LOCAL_C void Test3()
-//
-// Test openfilescan - empty, full, empty full
-//
-	{
-	test.Next(_L("Scan for open files - multiple sessions"));
-
-	RFs fs1,fs2,fs3,fs4;
-	TInt r=fs1.Connect();
-	test(r==KErrNone);
-	r=fs2.Connect();
-	test(r==KErrNone);
-	r=fs3.Connect();
-	test(r==KErrNone);
-	r=fs4.Connect();
-	test(r==KErrNone);
-
-	RFile file1,file2,file3;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file1.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	r=file1.Open(fs4,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(fs4,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(fs4,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-
-	if (gRunByBatch)
-		{
-		test(list!=NULL);
-		test(list->Count()==1);
-		TEntry entry=(*list)[0];
-		test(entry.iName.FindF(_L(".BAT"))>=0);
-		delete list;
-		fileScan.NextL(list);
-		}
-
-	test(list!=NULL);
-	TInt count=list->Count();
-	test(count==3);
-	TEntry entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	TThreadId threadId=fileScan.ThreadId();
-	RThread current;
-	TThreadId currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list!=NULL);
-	count=list->Count();
-	test(count==3);
-	entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	threadId=fileScan.ThreadId();
-	currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list==NULL);
-
-	file1.Close();
-	file2.Close();
-	file3.Close();
-	fs1.Close();
-	fs2.Close();
-	fs3.Close();
-	fs4.Close();
-	}
-
-LOCAL_C void Test4()
-//
-// Test openfilescan - rdirs, empty, full, empty rdirs.
-//
-	{
-	test.Next(_L("Scan for open files - check RDir sessions are ignored"));
-
-	RFs fs1,fs2,fs3,fs4;
-	TFileName fn;
-	TInt r=fs1.Connect();
-	test(r==KErrNone);
-	r=fs2.Connect();
-	test(r==KErrNone);
-	r=fs3.Connect();
-	test(r==KErrNone);
-	r=fs4.Connect();
-	test(r==KErrNone);
-
-	RDir dir1,dir2,dir3,dir4;
-	fn = _L("Z:\\TEST\\*.XDE");
-	fn[0] = gExeFileName[0];
-	r=dir1.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir2.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir3.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir4.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-
-	RFile file1,file2,file3;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file1.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(fs2,fn,EFileRead);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(fs2,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	RDir dir5,dir6,dir7,dir8;
-	fn = _L("Z:\\TEST\\*.XDE");
-	fn[0] = gExeFileName[0];
-	r=dir5.Open(fs4,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir6.Open(fs4,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir7.Open(fs4,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir8.Open(fs4,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-
-	if (gRunByBatch)
-		{
-		test(list!=NULL);
-		test(list->Count()==1);
-		TEntry entry=(*list)[0];
-		test(entry.iName.FindF(_L(".BAT"))>=0);
-		delete list;
-		fileScan.NextL(list);
-		}
-
-	test(list!=NULL);
-	TInt count=list->Count();
-	test(count==3);
-	TEntry entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	TThreadId threadId=fileScan.ThreadId();
-	RThread current;
-	TThreadId currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list==NULL);
-
-	file1.Close();
-	file2.Close();
-	file3.Close();
-	dir1.Close();	dir2.Close();
-	dir3.Close();	dir4.Close();
-	dir5.Close();	dir6.Close();
-	dir7.Close();	dir8.Close();
-	fs1.Close();	fs2.Close();
-	fs3.Close();	fs4.Close();
-	}
-
-LOCAL_C void Test5()
-//
-// Test OpenFileScan
-//
-	{
-
-	test.Next(_L("Scan for open files - mixed RDirs and RFiles"));
-
-	RFile file1,file2,file3;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	TInt r=file1.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FILE.CPP");
-	fn[0] = gExeFileName[0];
-	r=file2.Open(TheFs,fn,EFileRead);
-	test(r==KErrNone);
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	r=file3.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	test(r==KErrNone);
-	
-	RDir dir1,dir2,dir3,dir4;
-	fn = _L("Z:\\TEST\\*.XDE");
-	fn[0] = gExeFileName[0];
-	r=dir1.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir2.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir3.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-	r=dir4.Open(TheFs,fn,KEntryAttMaskSupported);
-	test(r==KErrNone);
-
-	CFileList* list;
-	TOpenFileScan fileScan(TheFs);
-	fileScan.NextL(list);
-
-	if (gRunByBatch)
-		{
-		test(list!=NULL);
-		test(list->Count()==1);
-		TEntry entry=(*list)[0];
-		test(entry.iName.FindF(_L(".BAT"))>=0);
-		delete list;
-		fileScan.NextL(list);
-		}
-
-	test(list!=NULL);
-	TInt count=list->Count();
-	test(count==3);
-	TEntry entry=(*list)[0];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	entry=(*list)[1];
-	test(entry.iName.FindF(_L("T_FILE.CPP"))>=0);
-	entry=(*list)[2];
-	test(entry.iName.FindF(_L("T_FSRV.CPP"))>=0);
-	TThreadId threadId=fileScan.ThreadId();
-	RThread current;
-	TThreadId currentId=current.Id();
-	test(threadId==currentId);
-	delete list;
-
-	fileScan.NextL(list);
-	test(list==NULL);
-
-	file1.Close();
-	file2.Close();
-	file3.Close();
-	dir1.Close();
-	dir2.Close();
-	dir3.Close();
-	dir4.Close();
-	}
-
-
-
-LOCAL_C void MultipleSessions(TInt aDrive, RTest& aTest)
-//
-//	Create an array of fileserver sessions
-//	Create an array of TMultipleSessionTest objects 
-//
-	
-	{
-#if defined(UNICODE)
-	const TInt maxNumberSessions=10;	
-#else
-	const TInt maxNumberSessions=20;
-#endif
-
-	RFs session[maxNumberSessions];
-	TMultipleSessionTest testObject[maxNumberSessions];
-	TInt i=0;
-	TInt r;
-
-	for (; i<maxNumberSessions; i++)
-		{
-		r=session[i].Connect();
-		test(r==KErrNone);
-		testObject[i].Initialise(session[i]);
-		testObject[i].SetSessionPath(aDrive);
-		testObject[i].RunTests(aTest);		//	Run the set of tests for each session
-		}									//	Leave each session open
-											
-
-	for (i=0; i<(maxNumberSessions-1); i++)
-		{
-	//	Alternate tests between open sessions
-		testObject[i].testSetVolume(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i].testSubst(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i].testInitialisation(aTest);
-		testObject[i].testDriveList(aTest);
-		testObject[i].MakeAndDeleteFiles(aTest);
-	//	Close session[i] and check that session[i+1] is OK	
-		session[i].Close();	
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i+1].testSetVolume(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i+1].testSubst(aTest);
-		testObject[i+1].testDriveList(aTest);
-	//	Reconnect session[i]	
-		r=session[i].Connect();
-		test(r==KErrNone);
-		testObject[i].Initialise(session[i]);
-		testObject[i].SetSessionPath(aDrive);
-		testObject[i].testSetVolume(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i].testSubst(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i].testInitialisation(aTest);
-		testObject[i].testDriveList(aTest);
-	//	Close session[i+1] and check that session[i] is OK
-		session[i+1].Close();	
-		testObject[i].testInitialisation(aTest);
-		testObject[i].testSetVolume(aTest);
-		testObject[i].testInitialisation(aTest);
-		testObject[i].testSubst(aTest);
-		testObject[i].testDriveList(aTest);
-	//	Reconnect session[i+1]	
-		r=session[i+1].Connect();
-		test(r==KErrNone);
-		testObject[i+1].Initialise(session[i+1]);
-		testObject[i+1].SetSessionPath(aDrive);
-		testObject[i].testSetVolume(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i].testSubst(aTest);
-		testObject[i+1].testInitialisation(aTest);
-	//	Close session[i] and check that session[i+1] is OK	
-		session[i].Close();	
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i+1].testSetVolume(aTest);
-		testObject[i+1].testInitialisation(aTest);
-		testObject[i+1].testSubst(aTest);
-		testObject[i+1].testDriveList(aTest);
-		
-		if (i==maxNumberSessions-1)	//	Tidy up by closing remaining open session
-			{
-			session[i+1].Close();	
-			}
-		}
-	}
-
-GLDEF_C void CallTestsDefaultL(TInt aDrive)
-//
-// Call tests that may leave
-//
-	{
-	Test0(test);
-	Test1();		
-	Test2();
-	Test3();
-	Test4();
-	Test5();
-	MultipleSessions(aDrive,test);
-	}
-
-GLDEF_C void CallTestsXL(TInt aDrive)
-//
-// Call tests for drive X
-//
-	{
-	Test0(testx);
-
-	RFile file1;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	TInt r=file1.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	testx(r==KErrNone);
-	file1.Close();
-	MultipleSessions(aDrive,testx);
-	}
-
-GLDEF_C void CallTestsYL(TInt aDrive)
-//
-// Call tests for drive Y
-//
-	{
-	Test0(testy);
-
-	RFile file1;
-	TFileName fn;
-	fn = _L("Z:\\TEST\\T_FSRV.CPP");
-	fn[0] = gExeFileName[0];
-	TInt r=file1.Open(TheFs,fn,EFileRead|EFileShareReadersOnly);
-	testy(r==KErrNone);
-	file1.Close();
-	MultipleSessions(aDrive,testy);
-	}
-
-GLDEF_C void CallTestsQL(TInt aDrive)
-//
-// Call tests for remote drive
-//
-	{
-
-	Test0(testq);
-	
-	testq.Printf(_L("This may take some time.  Please be patient...\n"));
-	
-	testq.Next(_L("Test remote drive with multiple sessions"));
-	MultipleSessions(aDrive,testq);
-
-	const TInt numberOfTests=10;
-	
-	TPtrC record[numberOfTests];
-	
-	TInt i=0;
-	for (;i<numberOfTests;i++)
-		{
-		if (i%2)
-			record[i].Set(_L("Hubble_Bubble"));
-		else
-			record[i].Set(_L("Toil_and_Trouble"));
-		}
-	
-	testq.Next(_L("Create a file 'TEXTFILE.TXT' on the remote drive"));
-	RFile f;
-	TInt r=f.Replace(TheFs,_L("TEXTFILE.TXT"),0);
-	testq(r==KErrNone);
-	TFileText textFile;
-	textFile.Set(f);
-	
-	testq.Next(_L("Write to 'TEXTFILE.TXT'"));
-	
-	for (i=0;i<numberOfTests;i++)
-		{
-		r=textFile.Write(record[i]);
-		testq(r==KErrNone);
-		testq.Printf(_L("Write %d completed OK\n"),i+1);
-		}
-	
-	f.Close();
-
-	RFile file1;
-	r=file1.Open(TheFs,_L("Q:\\TEST\\T_FSRV.CPP"),EFileRead|EFileShareReadersOnly);
-	testq(r==KErrNone);
-	file1.Close();	
-
-	}