diff -r ffa851df0825 -r 2fb8b9db1c86 symbian-qemu-0.9.1-12/qemu-symbian-svp/hw/smbus_eeprom.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/hw/smbus_eeprom.c	Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,112 @@
+/*
+ * QEMU SMBus EEPROM device
+ *
+ * Copyright (c) 2007 Arastra, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw.h"
+#include "i2c.h"
+#include "smbus.h"
+
+//#define DEBUG
+
+typedef struct SMBusEEPROMDevice {
+    SMBusDevice dev;
+    uint8_t *data;
+    uint8_t offset;
+} SMBusEEPROMDevice;
+
+static void eeprom_quick_cmd(SMBusDevice *dev, uint8_t read)
+{
+#ifdef DEBUG
+    printf("eeprom_quick_cmd: addr=0x%02x read=%d\n", dev->i2c.address, read);
+#endif
+}
+
+static void eeprom_send_byte(SMBusDevice *dev, uint8_t val)
+{
+    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+#ifdef DEBUG
+    printf("eeprom_send_byte: addr=0x%02x val=0x%02x\n",
+           dev->i2c.address, val);
+#endif
+    eeprom->offset = val;
+}
+
+static uint8_t eeprom_receive_byte(SMBusDevice *dev)
+{
+    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+    uint8_t val = eeprom->data[eeprom->offset++];
+#ifdef DEBUG
+    printf("eeprom_receive_byte: addr=0x%02x val=0x%02x\n",
+           dev->i2c.address, val);
+#endif
+    return val;
+}
+
+static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len)
+{
+    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+    int n;
+#ifdef DEBUG
+    printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",
+           dev->i2c.address, cmd, buf[0]);
+#endif
+    /* An page write operation is not a valid SMBus command.
+       It is a block write without a length byte.  Fortunately we
+       get the full block anyway.  */
+    /* TODO: Should this set the current location?  */
+    if (cmd + len > 256)
+        n = 256 - cmd;
+    else
+        n = len;
+    memcpy(eeprom->data + cmd, buf, n);
+    len -= n;
+    if (len)
+        memcpy(eeprom->data, buf + n, len);
+}
+
+static uint8_t eeprom_read_data(SMBusDevice *dev, uint8_t cmd, int n)
+{
+    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+    /* If this is the first byte then set the current position.  */
+    if (n == 0)
+        eeprom->offset = cmd;
+    /* As with writes, we implement block reads without the
+       SMBus length byte.  */
+    return eeprom_receive_byte(dev);
+}
+
+void smbus_eeprom_device_init(i2c_bus *bus, uint8_t addr, uint8_t *buf)
+{
+    SMBusEEPROMDevice *eeprom;
+
+    eeprom = (SMBusEEPROMDevice *)smbus_device_init(bus, addr,
+        sizeof(SMBusEEPROMDevice));
+
+    eeprom->dev.quick_cmd = eeprom_quick_cmd;
+    eeprom->dev.send_byte = eeprom_send_byte;
+    eeprom->dev.receive_byte = eeprom_receive_byte;
+    eeprom->dev.write_data = eeprom_write_data;
+    eeprom->dev.read_data = eeprom_read_data;
+    eeprom->data = buf;
+    eeprom->offset = 0;
+}