# Makefile.in generated by automake 1.9.6 from Makefile.am.

# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005  Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

# -*-Makefile-*-, or close enough

# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software

# Foundation, Inc.

# This file is part of GNU Make.

#

# GNU Make is free software; you can redistribute it and/or modify it under the

# terms of the GNU General Public License as published by the Free Software

# Foundation; either version 2, or (at your option) any later version.

#

# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY

# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR

# A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License along with

# GNU Make; see the file COPYING.  If not, write to the Free Software

# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

srcdir = .

top_srcdir = ..

pkgdatadir = $(datadir)/make

pkglibdir = $(libdir)/make

pkgincludedir = $(includedir)/make

top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

INSTALL = /usr/bin/install -c

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = i686-pc-linux-gnu

host_triplet = i686-pc-linux-gnu

subdir = doc

DIST_COMMON = $(make_TEXINFOS) $(srcdir)/Makefile.am \

	$(srcdir)/Makefile.in $(srcdir)/stamp-vti \

	$(srcdir)/version.texi

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \

	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \

	$(top_srcdir)/config/lib-ld.m4 \

	$(top_srcdir)/config/lib-link.m4 \

	$(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \

	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \

	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

	$(ACLOCAL_M4)

mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

SOURCES =

DIST_SOURCES =

INFO_DEPS = $(srcdir)/make.info

TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex

am__TEXINFO_TEX_DIR = $(top_srcdir)/config

DVIS = make.dvi

PDFS = make.pdf

PSS = make.ps

HTMLS = make.html

TEXINFOS = make.texi

TEXI2DVI = texi2dvi

TEXI2PDF = $(TEXI2DVI) --pdf --batch

MAKEINFOHTML = $(MAKEINFO) --html

AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)

DVIPS = dvips

am__installdirs = "$(DESTDIR)$(infodir)"

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

ALLOCA = 

AMDEP_FALSE = #

AMDEP_TRUE = 

AR = ar

AWK = gawk

CC = gcc

CCDEPMODE = depmode=gcc3

CFLAGS = -O2 -mtune=i686

CPP = gcc -E

CPPFLAGS = 

CYGPATH_W = echo

DEFS = -DHAVE_CONFIG_H

DEPDIR = .deps

ECHO_C = 

ECHO_N = -n

ECHO_T = 

EGREP = grep -E

EXEEXT = 

GETLOADAVG_LIBS = 

GLOBINC = 

GLOBLIB = 

GMSGFMT = :

INSTALL_DATA = ${INSTALL} -m 644

INSTALL_PROGRAM = ${INSTALL}

INSTALL_SCRIPT = ${INSTALL}

INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s

INTLLIBS = 

KMEM_GROUP = 

LDFLAGS = 

LIBICONV = -liconv

LIBINTL = 

LIBOBJS = 

LIBS = -lrt 

LTLIBICONV = -liconv

LTLIBINTL = 

LTLIBOBJS = 

MAKE_HOST = i686-pc-linux-gnu

MKINSTALLDIRS = $(top_builddir)/config/mkinstalldirs

MSGFMT = :

MSGMERGE = :

NEED_SETGID = false

OBJEXT = o

PACKAGE = make

PACKAGE_BUGREPORT = bug-make@gnu.org

PACKAGE_NAME = GNU make

PACKAGE_STRING = GNU make 3.81

PACKAGE_TARNAME = make

PACKAGE_VERSION = 3.81

PATH_SEPARATOR = :

PERL = perl

POSUB = po

RANLIB = ranlib

REMOTE = stub

SET_MAKE = 

SHELL = /bin/sh

STRIP = 

U = 

USE_CUSTOMS_FALSE = 

USE_CUSTOMS_TRUE = #

USE_LOCAL_GLOB_FALSE = 

USE_LOCAL_GLOB_TRUE = #

USE_NLS = yes

VERSION = 3.81

WINDOWSENV_FALSE = 

WINDOWSENV_TRUE = #

XGETTEXT = :

ac_ct_CC = gcc

ac_ct_RANLIB = ranlib

ac_ct_STRIP = 

am__fastdepCC_FALSE = #

am__fastdepCC_TRUE = 

am__include = include

am__leading_dot = .

am__quote = 

am__tar = ${AMTAR} chof - "$$tardir"

am__untar = ${AMTAR} xf -

bindir = ${exec_prefix}/bin

build = i686-pc-linux-gnu

build_alias = 

build_cpu = i686

build_os = linux-gnu

build_vendor = pc

datadir = ${prefix}/share

exec_prefix = ${prefix}

host = i686-pc-linux-gnu

host_alias = 

host_cpu = i686

host_os = linux-gnu

host_vendor = pc

includedir = ${prefix}/include

infodir = ${prefix}/info

libdir = ${exec_prefix}/lib

libexecdir = ${exec_prefix}/libexec

localstatedir = ${prefix}/var

mandir = ${prefix}/man

mkdir_p = mkdir -p --

oldincludedir = /usr/include

program_transform_name = s,x,x,

sbindir = ${exec_prefix}/sbin

sharedstatedir = ${prefix}/com

sysconfdir = ${prefix}/etc

target_alias = 

TEXI2HTML = texi2html

TEXI2HTML_FLAGS = -split_chapter

info_TEXINFOS = make.texi

make_TEXINFOS = fdl.texi make-stds.texi

CLEANFILES = make*.html

all: all-am

.SUFFIXES:

.SUFFIXES: .dvi .html .info .pdf .ps .texi

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

	@for dep in $?; do \

	  case '$(am__configure_deps)' in \

	    *$$dep*) \

	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \

		&& exit 0; \

	      exit 1;; \

	  esac; \

	done; \

	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \

	cd $(top_srcdir) && \

	  $(AUTOMAKE) --gnu  doc/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

	@case '$?' in \

	  *config.status*) \

	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

	  *) \

	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

.texi.info:

	restore=: && backupdir="$(am__leading_dot)am$$$$" && \

	am__cwd=`pwd` && cd $(srcdir) && \

	rm -rf $$backupdir && mkdir $$backupdir && \

	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \

	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \

	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \

	  done; \

	else :; fi && \

	cd "$$am__cwd"; \

	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \

	 -o $@ $<; \

	then \

	  rc=0; \

	  cd $(srcdir); \

	else \

	  rc=$$?; \

	  cd $(srcdir) && \

	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \

	fi; \

	rm -rf $$backupdir; exit $$rc

.texi.dvi:

	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \

	$(TEXI2DVI) $<

.texi.pdf:

	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \

	$(TEXI2PDF) $<

.texi.html:

	rm -rf $(@:.html=.htp)

	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \

	 -o $(@:.html=.htp) $<; \

	then \

	  rm -rf $@; \

	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \

	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \

	else \

	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \

	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \

	  exit 1; \

	fi

$(srcdir)/make.info: make.texi $(srcdir)/version.texi $(make_TEXINFOS)

make.dvi: make.texi $(srcdir)/version.texi $(make_TEXINFOS)

make.pdf: make.texi $(srcdir)/version.texi $(make_TEXINFOS)

make.html: make.texi $(srcdir)/version.texi $(make_TEXINFOS)

$(srcdir)/version.texi:  $(srcdir)/stamp-vti

$(srcdir)/stamp-vti: make.texi $(top_srcdir)/configure

	@(dir=.; test -f ./make.texi || dir=$(srcdir); \

	set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/make.texi`; \

	echo "@set UPDATED $$1 $$2 $$3"; \

	echo "@set UPDATED-MONTH $$2 $$3"; \

	echo "@set EDITION $(VERSION)"; \

	echo "@set VERSION $(VERSION)") > vti.tmp

	@cmp -s vti.tmp $(srcdir)/version.texi \

	  || (echo "Updating $(srcdir)/version.texi"; \

	      cp vti.tmp $(srcdir)/version.texi)

	-@rm -f vti.tmp

	@cp $(srcdir)/version.texi $@

mostlyclean-vti:

	-rm -f vti.tmp

maintainer-clean-vti:

	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

.dvi.ps:

	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	$(DVIPS) -o $@ $<

uninstall-info-am:

	@$(PRE_UNINSTALL)

	@if (install-info --version && \

	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \

	  list='$(INFO_DEPS)'; \

	  for file in $$list; do \

	    relfile=`echo "$$file" | sed 's|^.*/||'`; \

	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \

	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \

	  done; \

	else :; fi

	@$(NORMAL_UNINSTALL)

	@list='$(INFO_DEPS)'; \

	for file in $$list; do \

	  relfile=`echo "$$file" | sed 's|^.*/||'`; \

	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \

	  (if cd "$(DESTDIR)$(infodir)"; then \

	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \

	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \

	   else :; fi); \

	done

dist-info: $(INFO_DEPS)

	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \

	list='$(INFO_DEPS)'; \

	for base in $$list; do \

	  case $$base in \

	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \

	  esac; \

	  if test -f $$base; then d=.; else d=$(srcdir); fi; \

	  for file in $$d/$$base*; do \

	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \

	    test -f $(distdir)/$$relfile || \

	      cp -p $$file $(distdir)/$$relfile; \

	  done; \

	done

mostlyclean-aminfo:

	-rm -rf make.aux make.cp make.cps make.fn make.fns make.ky make.kys make.log \

	  make.pg make.tmp make.toc make.tp make.tps make.vr make.dvi \

	  make.pdf make.ps make.html

maintainer-clean-aminfo:

	@list='$(INFO_DEPS)'; for i in $$list; do \

	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \

	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \

	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \

	done

tags: TAGS

TAGS:

ctags: CTAGS

CTAGS:

distdir: $(DISTFILES)

	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \

	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \

	list='$(DISTFILES)'; for file in $$list; do \

	  case $$file in \

	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \

	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \

	  esac; \

	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \

	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \

	    dir="/$$dir"; \

	    $(mkdir_p) "$(distdir)$$dir"; \

	  else \

	    dir=''; \

	  fi; \

	  if test -d $$d/$$file; then \

	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \

	    fi; \

	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \

	  else \

	    test -f $(distdir)/$$file \

	    || cp -p $$d/$$file $(distdir)/$$file \

	    || exit 1; \

	  fi; \

	done

	$(MAKE) $(AM_MAKEFLAGS) \

	  top_distdir="$(top_distdir)" distdir="$(distdir)" \

	  dist-info

check-am: all-am

check: check-am

all-am: Makefile $(INFO_DEPS)

installdirs:

	for dir in "$(DESTDIR)$(infodir)"; do \

	  test -z "$$dir" || $(mkdir_p) "$$dir"; \

	done

install: install-am

install-exec: install-exec-am

install-data: install-data-am

uninstall: uninstall-am

install-am: all-am

	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am

install-strip:

	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

	  `test -z '$(STRIP)' || \

	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:

	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:

	@echo "This command is intended for maintainers to use"

	@echo "it deletes files that may require special tools to rebuild."

clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

	-rm -f Makefile

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)

	@$(NORMAL_INSTALL)

	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"

	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \

	list='$(INFO_DEPS)'; \

	for file in $$list; do \

	  case $$file in \

	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \

	  esac; \

	  if test -f $$file; then d=.; else d=$(srcdir); fi; \

	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \

	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \

                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \

	    if test -f $$ifile; then \

	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \

	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \

	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \

	    else : ; fi; \

	  done; \

	done

	@$(POST_INSTALL)

	@if (install-info --version && \

	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \

	  list='$(INFO_DEPS)'; \

	  for file in $$list; do \

	    relfile=`echo "$$file" | sed 's|^.*/||'`; \

	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\

	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\

	  done; \

	else : ; fi

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

	-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-aminfo \

	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-info-am

.PHONY: all all-am check check-am clean clean-generic dist-info \

	distclean distclean-generic distdir dvi dvi-am html html-am \

	info info-am install install-am install-data install-data-am \

	install-exec install-exec-am install-info install-info-am \

	install-man install-strip installcheck installcheck-am \

	installdirs maintainer-clean maintainer-clean-aminfo \

	maintainer-clean-generic maintainer-clean-vti mostlyclean \

	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \

	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am

html: make_1.html

make_1.html: $(info_TEXINFOS) $(make_TEXINFOS)

	$(TEXI2HTML) $(TEXI2HTML_FLAGS) $(srcdir)/make.texi

.PHONY: html

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: