FCL/sf/adapt/qemu: comparison symbian-qemu-0.9.1-12/qemu-symbian-svp/hw/slavio

equal deleted inserted replaced

-:ffa851df0825
+:2fb8b9db1c86
+/*
+* QEMU Sparc SLAVIO timer controller emulation
+*
+* Copyright (c) 2003-2005 Fabrice Bellard
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+* THE SOFTWARE.
+*/
+#include "hw.h"
+#include "sun4m.h"
+#include "qemu-timer.h"
+//#define DEBUG_TIMER
+#ifdef DEBUG_TIMER
+#define DPRINTF(fmt, args...) \
+do { printf("TIMER: " fmt , ##args); } while (0)
+#else
+#define DPRINTF(fmt, args...) do {} while (0)
+#endif
+/*
+* Registers of hardware timer in sun4m.
+*
+* This is the timer/counter part of chip STP2001 (Slave I/O), also
+* produced as NCR89C105. See
+* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
+*
+* The 31-bit counter is incremented every 500ns by bit 9. Bits 8..0
+* are zero. Bit 31 is 1 when count has been reached.
+*
+* Per-CPU timers interrupt local CPU, system timer uses normal
+* interrupt routing.
+*
+*/
+#define MAX_CPUS 16
+typedef struct SLAVIO_TIMERState {
+qemu_irq irq;
+ptimer_state *timer;
+uint32_t count, counthigh, reached;
+uint64_t limit;
+// processor only
+uint32_t running;
+struct SLAVIO_TIMERState *master;
+uint32_t slave_index;
+// system only
+uint32_t num_slaves;
+struct SLAVIO_TIMERState *slave[MAX_CPUS];
+uint32_t slave_mode;
+} SLAVIO_TIMERState;
+#define SYS_TIMER_SIZE 0x14
+#define CPU_TIMER_SIZE 0x10
+#define SYS_TIMER_OFFSET      0x10000ULL
+#define CPU_TIMER_OFFSET(cpu) (0x1000ULL * cpu)
+#define TIMER_LIMIT         0
+#define TIMER_COUNTER       1
+#define TIMER_COUNTER_NORST 2
+#define TIMER_STATUS        3
+#define TIMER_MODE          4
+#define TIMER_COUNT_MASK32 0xfffffe00
+#define TIMER_LIMIT_MASK32 0x7fffffff
+#define TIMER_MAX_COUNT64  0x7ffffffffffffe00ULL
+#define TIMER_MAX_COUNT32  0x7ffffe00ULL
+#define TIMER_REACHED      0x80000000
+#define TIMER_PERIOD       500ULL // 500ns
+#define LIMIT_TO_PERIODS(l) ((l) >> 9)
+#define PERIODS_TO_LIMIT(l) ((l) << 9)
+static int slavio_timer_is_user(SLAVIO_TIMERState *s)
+{
+return s->master && (s->master->slave_mode & (1 << s->slave_index));
+}
+// Update count, set irq, update expire_time
+// Convert from ptimer countdown units
+static void slavio_timer_get_out(SLAVIO_TIMERState *s)
+{
+uint64_t count, limit;
+if (s->limit == 0) /* free-run processor or system counter */
+limit = TIMER_MAX_COUNT32;
+else
+limit = s->limit;
+if (s->timer)
+count = limit - PERIODS_TO_LIMIT(ptimer_get_count(s->timer));
+else
+count = 0;
+DPRINTF("get_out: limit %" PRIx64 " count %x%08x\n", s->limit,
+s->counthigh, s->count);
+s->count = count & TIMER_COUNT_MASK32;
+s->counthigh = count >> 32;
+}
+// timer callback
+static void slavio_timer_irq(void *opaque)
+{
+SLAVIO_TIMERState *s = opaque;
+slavio_timer_get_out(s);
+DPRINTF("callback: count %x%08x\n", s->counthigh, s->count);
+s->reached = TIMER_REACHED;
+if (!slavio_timer_is_user(s))
+qemu_irq_raise(s->irq);
+}
+static uint32_t slavio_timer_mem_readl(void *opaque, target_phys_addr_t addr)
+{
+SLAVIO_TIMERState *s = opaque;
+uint32_t saddr, ret;
+saddr = addr >> 2;
+switch (saddr) {
+case TIMER_LIMIT:
+// read limit (system counter mode) or read most signifying
+// part of counter (user mode)
+if (slavio_timer_is_user(s)) {
+// read user timer MSW
+slavio_timer_get_out(s);
+ret = s->counthigh | s->reached;
+} else {
+// read limit
+// clear irq
+qemu_irq_lower(s->irq);
+s->reached = 0;
+ret = s->limit & TIMER_LIMIT_MASK32;
+}
+break;
+case TIMER_COUNTER:
+// read counter and reached bit (system mode) or read lsbits
+// of counter (user mode)
+slavio_timer_get_out(s);
+if (slavio_timer_is_user(s)) // read user timer LSW
+ret = s->count & TIMER_MAX_COUNT64;
+else // read limit
+ret = (s->count & TIMER_MAX_COUNT32) | s->reached;
+break;
+case TIMER_STATUS:
+// only available in processor counter/timer
+// read start/stop status
+ret = s->running;
+break;
+case TIMER_MODE:
+// only available in system counter
+// read user/system mode
+ret = s->slave_mode;
+break;
+default:
+DPRINTF("invalid read address " TARGET_FMT_plx "\n", addr);
+ret = 0;
+break;
+}
+DPRINTF("read " TARGET_FMT_plx " = %08x\n", addr, ret);
+return ret;
+}
+static void slavio_timer_mem_writel(void *opaque, target_phys_addr_t addr,
+uint32_t val)
+{
+SLAVIO_TIMERState *s = opaque;
+uint32_t saddr;
+DPRINTF("write " TARGET_FMT_plx " %08x\n", addr, val);
+saddr = addr >> 2;
+switch (saddr) {
+case TIMER_LIMIT:
+if (slavio_timer_is_user(s)) {
+uint64_t count;
+// set user counter MSW, reset counter
+s->limit = TIMER_MAX_COUNT64;
+s->counthigh = val & (TIMER_MAX_COUNT64 >> 32);
+s->reached = 0;
+count = ((uint64_t)s->counthigh << 32) | s->count;
+DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+count);
+if (s->timer)
+ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
+} else {
+// set limit, reset counter
+qemu_irq_lower(s->irq);
+s->limit = val & TIMER_MAX_COUNT32;
+if (s->timer) {
+if (s->limit == 0) /* free-run */
+ptimer_set_limit(s->timer,
+LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+else
+ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
+}
+}
+break;
+case TIMER_COUNTER:
+if (slavio_timer_is_user(s)) {
+uint64_t count;
+// set user counter LSW, reset counter
+s->limit = TIMER_MAX_COUNT64;
+s->count = val & TIMER_MAX_COUNT64;
+s->reached = 0;
+count = ((uint64_t)s->counthigh) << 32 | s->count;
+DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+count);
+if (s->timer)
+ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
+} else
+DPRINTF("not user timer\n");
+break;
+case TIMER_COUNTER_NORST:
+// set limit without resetting counter
+s->limit = val & TIMER_MAX_COUNT32;
+if (s->timer) {
+if (s->limit == 0)	/* free-run */
+ptimer_set_limit(s->timer,
+LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 0);
+else
+ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 0);
+}
+break;
+case TIMER_STATUS:
+if (slavio_timer_is_user(s)) {
+// start/stop user counter
+if ((val & 1) && !s->running) {
+DPRINTF("processor %d user timer started\n", s->slave_index);
+if (s->timer)
+ptimer_run(s->timer, 0);
+s->running = 1;
+} else if (!(val & 1) && s->running) {
+DPRINTF("processor %d user timer stopped\n", s->slave_index);
+if (s->timer)
+ptimer_stop(s->timer);
+s->running = 0;
+}
+}
+break;
+case TIMER_MODE:
+if (s->master == NULL) {
+unsigned int i;
+for (i = 0; i < s->num_slaves; i++) {
+unsigned int processor = 1 << i;
+// check for a change in timer mode for this processor
+if ((val & processor) != (s->slave_mode & processor)) {
+if (val & processor) { // counter -> user timer
+qemu_irq_lower(s->slave[i]->irq);
+// counters are always running
+ptimer_stop(s->slave[i]->timer);
+s->slave[i]->running = 0;
+// user timer limit is always the same
+s->slave[i]->limit = TIMER_MAX_COUNT64;
+ptimer_set_limit(s->slave[i]->timer,
+LIMIT_TO_PERIODS(s->slave[i]->limit),
+1);
+// set this processors user timer bit in config
+// register
+s->slave_mode |= processor;
+DPRINTF("processor %d changed from counter to user "
+"timer\n", s->slave[i]->slave_index);
+} else { // user timer -> counter
+// stop the user timer if it is running
+if (s->slave[i]->running)
+ptimer_stop(s->slave[i]->timer);
+// start the counter
+ptimer_run(s->slave[i]->timer, 0);
+s->slave[i]->running = 1;
+// clear this processors user timer bit in config
+// register
+s->slave_mode &= ~processor;
+DPRINTF("processor %d changed from user timer to "
+"counter\n", s->slave[i]->slave_index);
+}
+}
+}
+} else
+DPRINTF("not system timer\n");
+break;
+default:
+DPRINTF("invalid write address " TARGET_FMT_plx "\n", addr);
+break;
+}
+}
+static CPUReadMemoryFunc *slavio_timer_mem_read[3] = {
+NULL,
+NULL,
+slavio_timer_mem_readl,
+};
+static CPUWriteMemoryFunc *slavio_timer_mem_write[3] = {
+NULL,
+NULL,
+slavio_timer_mem_writel,
+};
+static void slavio_timer_save(QEMUFile *f, void *opaque)
+{
+SLAVIO_TIMERState *s = opaque;
+qemu_put_be64s(f, &s->limit);
+qemu_put_be32s(f, &s->count);
+qemu_put_be32s(f, &s->counthigh);
+qemu_put_be32s(f, &s->reached);
+qemu_put_be32s(f, &s->running);
+if (s->timer)
+qemu_put_ptimer(f, s->timer);
+}
+static int slavio_timer_load(QEMUFile *f, void *opaque, int version_id)
+{
+SLAVIO_TIMERState *s = opaque;
+if (version_id != 3)
+return -EINVAL;
+qemu_get_be64s(f, &s->limit);
+qemu_get_be32s(f, &s->count);
+qemu_get_be32s(f, &s->counthigh);
+qemu_get_be32s(f, &s->reached);
+qemu_get_be32s(f, &s->running);
+if (s->timer)
+qemu_get_ptimer(f, s->timer);
+return 0;
+}
+static void slavio_timer_reset(void *opaque)
+{
+SLAVIO_TIMERState *s = opaque;
+s->limit = 0;
+s->count = 0;
+s->reached = 0;
+s->slave_mode = 0;
+if (!s->master || s->slave_index < s->master->num_slaves) {
+ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+ptimer_run(s->timer, 0);
+}
+s->running = 1;
+qemu_irq_lower(s->irq);
+}
+static SLAVIO_TIMERState *slavio_timer_init(target_phys_addr_t addr,
+qemu_irq irq,
+SLAVIO_TIMERState *master,
+uint32_t slave_index)
+{
+int slavio_timer_io_memory;
+SLAVIO_TIMERState *s;
+QEMUBH *bh;
+s = qemu_mallocz(sizeof(SLAVIO_TIMERState));
+if (!s)
+return s;
+s->irq = irq;
+s->master = master;
+s->slave_index = slave_index;
+if (!master || slave_index < master->num_slaves) {
+bh = qemu_bh_new(slavio_timer_irq, s);
+s->timer = ptimer_init(bh);
+ptimer_set_period(s->timer, TIMER_PERIOD);
+}
+slavio_timer_io_memory = cpu_register_io_memory(0, slavio_timer_mem_read,
+slavio_timer_mem_write, s);
+if (master)
+cpu_register_physical_memory(addr, CPU_TIMER_SIZE,
+slavio_timer_io_memory);
+else
+cpu_register_physical_memory(addr, SYS_TIMER_SIZE,
+slavio_timer_io_memory);
+register_savevm("slavio_timer", addr, 3, slavio_timer_save,
+slavio_timer_load, s);
+qemu_register_reset(slavio_timer_reset, s);
+slavio_timer_reset(s);
+return s;
+}
+void slavio_timer_init_all(target_phys_addr_t base, qemu_irq master_irq,
+qemu_irq *cpu_irqs, unsigned int num_cpus)
+{
+SLAVIO_TIMERState *master;
+unsigned int i;
+master = slavio_timer_init(base + SYS_TIMER_OFFSET, master_irq, NULL, 0);
+master->num_slaves = num_cpus;
+for (i = 0; i < MAX_CPUS; i++) {
+master->slave[i] = slavio_timer_init(base + (target_phys_addr_t)
+CPU_TIMER_OFFSET(i),
+cpu_irqs[i], master, i);
+}
+}