--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/python-2.6.1/Modules/socketmodule.c Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,5307 @@
+/* Socket module */
+
+/*
+
+This module provides an interface to Berkeley socket IPC.
+
+Limitations:
+
+- Only AF_INET, AF_INET6 and AF_UNIX address families are supported in a
+ portable manner, though AF_PACKET, AF_NETLINK and AF_TIPC are supported
+ under Linux.
+- No read/write operations (use sendall/recv or makefile instead).
+- Additional restrictions apply on some non-Unix platforms (compensated
+ for by socket.py).
+
+Module interface:
+
+- socket.error: exception raised for socket specific errors
+- socket.gaierror: exception raised for getaddrinfo/getnameinfo errors,
+ a subclass of socket.error
+- socket.herror: exception raised for gethostby* errors,
+ a subclass of socket.error
+- socket.fromfd(fd, family, type[, proto]) --> new socket object (created
+ from an existing file descriptor)
+- socket.gethostbyname(hostname) --> host IP address (string: 'dd.dd.dd.dd')
+- socket.gethostbyaddr(IP address) --> (hostname, [alias, ...], [IP addr, ...])
+- socket.gethostname() --> host name (string: 'spam' or 'spam.domain.com')
+- socket.getprotobyname(protocolname) --> protocol number
+- socket.getservbyname(servicename[, protocolname]) --> port number
+- socket.getservbyport(portnumber[, protocolname]) --> service name
+- socket.socket([family[, type [, proto]]]) --> new socket object
+- socket.socketpair([family[, type [, proto]]]) --> (socket, socket)
+- socket.ntohs(16 bit value) --> new int object
+- socket.ntohl(32 bit value) --> new int object
+- socket.htons(16 bit value) --> new int object
+- socket.htonl(32 bit value) --> new int object
+- socket.getaddrinfo(host, port [, family, socktype, proto, flags])
+ --> List of (family, socktype, proto, canonname, sockaddr)
+- socket.getnameinfo(sockaddr, flags) --> (host, port)
+- socket.AF_INET, socket.SOCK_STREAM, etc.: constants from <socket.h>
+- socket.has_ipv6: boolean value indicating if IPv6 is supported
+- socket.inet_aton(IP address) -> 32-bit packed IP representation
+- socket.inet_ntoa(packed IP) -> IP address string
+- socket.getdefaulttimeout() -> None | float
+- socket.setdefaulttimeout(None | float)
+- an Internet socket address is a pair (hostname, port)
+ where hostname can be anything recognized by gethostbyname()
+ (including the dd.dd.dd.dd notation) and port is in host byte order
+- where a hostname is returned, the dd.dd.dd.dd notation is used
+- a UNIX domain socket address is a string specifying the pathname
+- an AF_PACKET socket address is a tuple containing a string
+ specifying the ethernet interface and an integer specifying
+ the Ethernet protocol number to be received. For example:
+ ("eth0",0x1234). Optional 3rd,4th,5th elements in the tuple
+ specify packet-type and ha-type/addr.
+- an AF_TIPC socket address is expressed as
+ (addr_type, v1, v2, v3 [, scope]); where addr_type can be one of:
+ TIPC_ADDR_NAMESEQ, TIPC_ADDR_NAME, and TIPC_ADDR_ID;
+ and scope can be one of:
+ TIPC_ZONE_SCOPE, TIPC_CLUSTER_SCOPE, and TIPC_NODE_SCOPE.
+ The meaning of v1, v2 and v3 depends on the value of addr_type:
+ if addr_type is TIPC_ADDR_NAME:
+ v1 is the server type
+ v2 is the port identifier
+ v3 is ignored
+ if addr_type is TIPC_ADDR_NAMESEQ:
+ v1 is the server type
+ v2 is the lower port number
+ v3 is the upper port number
+ if addr_type is TIPC_ADDR_ID:
+ v1 is the node
+ v2 is the ref
+ v3 is ignored
+
+
+Local naming conventions:
+
+- names starting with sock_ are socket object methods
+- names starting with socket_ are module-level functions
+- names starting with PySocket are exported through socketmodule.h
+
+*/
+
+#ifdef __APPLE__
+ /*
+ * inet_aton is not available on OSX 10.3, yet we want to use a binary
+ * that was build on 10.4 or later to work on that release, weak linking
+ * comes to the rescue.
+ */
+# pragma weak inet_aton
+#endif
+
+#include "Python.h"
+#include "structmember.h"
+
+#undef MAX
+#define MAX(x, y) ((x) < (y) ? (y) : (x))
+
+/* Socket object documentation */
+PyDoc_STRVAR(sock_doc,
+"socket([family[, type[, proto]]]) -> socket object\n\
+\n\
+Open a socket of the given type. The family argument specifies the\n\
+address family; it defaults to AF_INET. The type argument specifies\n\
+whether this is a stream (SOCK_STREAM, this is the default)\n\
+or datagram (SOCK_DGRAM) socket. The protocol argument defaults to 0,\n\
+specifying the default protocol. Keyword arguments are accepted.\n\
+\n\
+A socket object represents one endpoint of a network connection.\n\
+\n\
+Methods of socket objects (keyword arguments not allowed):\n\
+\n\
+accept() -- accept a connection, returning new socket and client address\n\
+bind(addr) -- bind the socket to a local address\n\
+close() -- close the socket\n\
+connect(addr) -- connect the socket to a remote address\n\
+connect_ex(addr) -- connect, return an error code instead of an exception\n\
+dup() -- return a new socket object identical to the current one [*]\n\
+fileno() -- return underlying file descriptor\n\
+getpeername() -- return remote address [*]\n\
+getsockname() -- return local address\n\
+getsockopt(level, optname[, buflen]) -- get socket options\n\
+gettimeout() -- return timeout or None\n\
+listen(n) -- start listening for incoming connections\n\
+makefile([mode, [bufsize]]) -- return a file object for the socket [*]\n\
+recv(buflen[, flags]) -- receive data\n\
+recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)\n\
+recvfrom(buflen[, flags]) -- receive data and sender\'s address\n\
+recvfrom_into(buffer[, nbytes, [, flags])\n\
+ -- receive data and sender\'s address (into a buffer)\n\
+sendall(data[, flags]) -- send all data\n\
+send(data[, flags]) -- send data, may not send all of it\n\
+sendto(data[, flags], addr) -- send data to a given address\n\
+setblocking(0 | 1) -- set or clear the blocking I/O flag\n\
+setsockopt(level, optname, value) -- set socket options\n\
+settimeout(None | float) -- set or clear the timeout\n\
+shutdown(how) -- shut down traffic in one or both directions\n\
+\n\
+ [*] not available on all platforms!");
+
+/* XXX This is a terrible mess of platform-dependent preprocessor hacks.
+ I hope some day someone can clean this up please... */
+
+/* Hacks for gethostbyname_r(). On some non-Linux platforms, the configure
+ script doesn't get this right, so we hardcode some platform checks below.
+ On the other hand, not all Linux versions agree, so there the settings
+ computed by the configure script are needed! */
+
+#ifndef linux
+# undef HAVE_GETHOSTBYNAME_R_3_ARG
+# undef HAVE_GETHOSTBYNAME_R_5_ARG
+# undef HAVE_GETHOSTBYNAME_R_6_ARG
+#endif
+
+#ifndef WITH_THREAD
+# undef HAVE_GETHOSTBYNAME_R
+#endif
+
+#ifdef HAVE_GETHOSTBYNAME_R
+# if defined(_AIX) || defined(__osf__)
+# define HAVE_GETHOSTBYNAME_R_3_ARG
+# elif defined(__sun) || defined(__sgi)
+# define HAVE_GETHOSTBYNAME_R_5_ARG
+# elif defined(linux)
+/* Rely on the configure script */
+# else
+# undef HAVE_GETHOSTBYNAME_R
+# endif
+#endif
+
+#if !defined(HAVE_GETHOSTBYNAME_R) && defined(WITH_THREAD) && \
+ !defined(MS_WINDOWS)
+# define USE_GETHOSTBYNAME_LOCK
+#endif
+
+/* To use __FreeBSD_version */
+#ifdef HAVE_SYS_PARAM_H
+#include <sys/param.h>
+#endif
+/* On systems on which getaddrinfo() is believed to not be thread-safe,
+ (this includes the getaddrinfo emulation) protect access with a lock. */
+#if defined(WITH_THREAD) && (defined(__APPLE__) || \
+ (defined(__FreeBSD__) && __FreeBSD_version+0 < 503000) || \
+ defined(__OpenBSD__) || defined(__NetBSD__) || \
+ defined(__VMS) || !defined(HAVE_GETADDRINFO))
+#define USE_GETADDRINFO_LOCK
+#endif
+
+#ifdef USE_GETADDRINFO_LOCK
+#define ACQUIRE_GETADDRINFO_LOCK PyThread_acquire_lock(netdb_lock, 1);
+#define RELEASE_GETADDRINFO_LOCK PyThread_release_lock(netdb_lock);
+#else
+#define ACQUIRE_GETADDRINFO_LOCK
+#define RELEASE_GETADDRINFO_LOCK
+#endif
+
+#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
+# include "pythread.h"
+#endif
+
+#if defined(PYCC_VACPP)
+# include <types.h>
+# include <io.h>
+# include <sys/ioctl.h>
+# include <utils.h>
+# include <ctype.h>
+#endif
+
+#if defined(__VMS)
+# include <ioctl.h>
+#endif
+
+#if defined(PYOS_OS2)
+# define INCL_DOS
+# define INCL_DOSERRORS
+# define INCL_NOPMAPI
+# include <os2.h>
+#endif
+
+#if defined(__sgi) && _COMPILER_VERSION>700 && !_SGIAPI
+/* make sure that the reentrant (gethostbyaddr_r etc)
+ functions are declared correctly if compiling with
+ MIPSPro 7.x in ANSI C mode (default) */
+
+/* XXX Using _SGIAPI is the wrong thing,
+ but I don't know what the right thing is. */
+#undef _SGIAPI /* to avoid warning */
+#define _SGIAPI 1
+
+#undef _XOPEN_SOURCE
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <netinet/in.h>
+#ifdef _SS_ALIGNSIZE
+#define HAVE_GETADDRINFO 1
+#define HAVE_GETNAMEINFO 1
+#endif
+
+#define HAVE_INET_PTON
+#include <netdb.h>
+#endif
+
+/* Irix 6.5 fails to define this variable at all. This is needed
+ for both GCC and SGI's compiler. I'd say that the SGI headers
+ are just busted. Same thing for Solaris. */
+#if (defined(__sgi) || defined(sun)) && !defined(INET_ADDRSTRLEN)
+#define INET_ADDRSTRLEN 16
+#endif
+
+/* Generic includes */
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+/* Generic socket object definitions and includes */
+#define PySocket_BUILDING_SOCKET
+#include "socketmodule.h"
+
+/* Addressing includes */
+
+#ifndef MS_WINDOWS
+
+/* Non-MS WINDOWS includes */
+# include <netdb.h>
+
+/* Headers needed for inet_ntoa() and inet_addr() */
+# ifdef __BEOS__
+# include <net/netdb.h>
+# elif defined(PYOS_OS2) && defined(PYCC_VACPP)
+# include <netdb.h>
+typedef size_t socklen_t;
+# else
+# include <arpa/inet.h>
+# endif
+
+# ifndef RISCOS
+# include <fcntl.h>
+# else
+# include <sys/ioctl.h>
+# include <socklib.h>
+# define NO_DUP
+int h_errno; /* not used */
+# define INET_ADDRSTRLEN 16
+# endif
+
+#else
+
+/* MS_WINDOWS includes */
+# ifdef HAVE_FCNTL_H
+# include <fcntl.h>
+# endif
+
+#endif
+
+#include <stddef.h>
+
+#ifndef offsetof
+# define offsetof(type, member) ((size_t)(&((type *)0)->member))
+#endif
+
+#ifndef O_NONBLOCK
+# define O_NONBLOCK O_NDELAY
+#endif
+
+/* include Python's addrinfo.h unless it causes trouble */
+#if defined(__sgi) && _COMPILER_VERSION>700 && defined(_SS_ALIGNSIZE)
+ /* Do not include addinfo.h on some newer IRIX versions.
+ * _SS_ALIGNSIZE is defined in sys/socket.h by 6.5.21,
+ * for example, but not by 6.5.10.
+ */
+#elif defined(_MSC_VER) && _MSC_VER>1201
+ /* Do not include addrinfo.h for MSVC7 or greater. 'addrinfo' and
+ * EAI_* constants are defined in (the already included) ws2tcpip.h.
+ */
+#else
+# include "addrinfo.h"
+#endif
+
+#ifndef HAVE_INET_PTON
+#if !defined(NTDDI_VERSION) || (NTDDI_VERSION < NTDDI_LONGHORN)
+int inet_pton(int af, const char *src, void *dst);
+const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
+#endif
+#endif
+
+#ifdef __APPLE__
+/* On OS X, getaddrinfo returns no error indication of lookup
+ failure, so we must use the emulation instead of the libinfo
+ implementation. Unfortunately, performing an autoconf test
+ for this bug would require DNS access for the machine performing
+ the configuration, which is not acceptable. Therefore, we
+ determine the bug just by checking for __APPLE__. If this bug
+ gets ever fixed, perhaps checking for sys/version.h would be
+ appropriate, which is 10/0 on the system with the bug. */
+#ifndef HAVE_GETNAMEINFO
+/* This bug seems to be fixed in Jaguar. Ths easiest way I could
+ Find to check for Jaguar is that it has getnameinfo(), which
+ older releases don't have */
+#undef HAVE_GETADDRINFO
+#endif
+
+#ifdef HAVE_INET_ATON
+#define USE_INET_ATON_WEAKLINK
+#endif
+
+#endif
+
+/* I know this is a bad practice, but it is the easiest... */
+#if !defined(HAVE_GETADDRINFO)
+/* avoid clashes with the C library definition of the symbol. */
+#define getaddrinfo fake_getaddrinfo
+#define gai_strerror fake_gai_strerror
+#define freeaddrinfo fake_freeaddrinfo
+#include "getaddrinfo.c"
+#endif
+#if !defined(HAVE_GETNAMEINFO)
+#define getnameinfo fake_getnameinfo
+#include "getnameinfo.c"
+#endif
+
+#if defined(MS_WINDOWS) || defined(__BEOS__)
+/* BeOS suffers from the same socket dichotomy as Win32... - [cjh] */
+/* seem to be a few differences in the API */
+#define SOCKETCLOSE closesocket
+#define NO_DUP /* Actually it exists on NT 3.5, but what the heck... */
+#endif
+
+#ifdef MS_WIN32
+#define EAFNOSUPPORT WSAEAFNOSUPPORT
+#define snprintf _snprintf
+#endif
+
+#if defined(PYOS_OS2) && !defined(PYCC_GCC)
+#define SOCKETCLOSE soclose
+#define NO_DUP /* Sockets are Not Actual File Handles under OS/2 */
+#endif
+
+#ifndef SOCKETCLOSE
+#define SOCKETCLOSE close
+#endif
+
+#if defined(HAVE_BLUETOOTH_H) || defined(HAVE_BLUETOOTH_BLUETOOTH_H)
+#define USE_BLUETOOTH 1
+#if defined(__FreeBSD__)
+#define BTPROTO_L2CAP BLUETOOTH_PROTO_L2CAP
+#define BTPROTO_RFCOMM BLUETOOTH_PROTO_RFCOMM
+#define BTPROTO_HCI BLUETOOTH_PROTO_HCI
+#define SOL_HCI SOL_HCI_RAW
+#define HCI_FILTER SO_HCI_RAW_FILTER
+#define sockaddr_l2 sockaddr_l2cap
+#define sockaddr_rc sockaddr_rfcomm
+#define hci_dev hci_node
+#define _BT_L2_MEMB(sa, memb) ((sa)->l2cap_##memb)
+#define _BT_RC_MEMB(sa, memb) ((sa)->rfcomm_##memb)
+#define _BT_HCI_MEMB(sa, memb) ((sa)->hci_##memb)
+#elif defined(__NetBSD__)
+#define sockaddr_l2 sockaddr_bt
+#define sockaddr_rc sockaddr_bt
+#define sockaddr_hci sockaddr_bt
+#define sockaddr_sco sockaddr_bt
+#define _BT_L2_MEMB(sa, memb) ((sa)->bt_##memb)
+#define _BT_RC_MEMB(sa, memb) ((sa)->bt_##memb)
+#define _BT_HCI_MEMB(sa, memb) ((sa)->bt_##memb)
+#define _BT_SCO_MEMB(sa, memb) ((sa)->bt_##memb)
+#else
+#define _BT_L2_MEMB(sa, memb) ((sa)->l2_##memb)
+#define _BT_RC_MEMB(sa, memb) ((sa)->rc_##memb)
+#define _BT_HCI_MEMB(sa, memb) ((sa)->hci_##memb)
+#define _BT_SCO_MEMB(sa, memb) ((sa)->sco_##memb)
+#endif
+#endif
+
+#ifdef __VMS
+/* TCP/IP Services for VMS uses a maximum send/recv buffer length */
+#define SEGMENT_SIZE (32 * 1024 -1)
+#endif
+
+#define SAS2SA(x) ((struct sockaddr *)(x))
+
+/*
+ * Constants for getnameinfo()
+ */
+#if !defined(NI_MAXHOST)
+#define NI_MAXHOST 1025
+#endif
+#if !defined(NI_MAXSERV)
+#define NI_MAXSERV 32
+#endif
+
+/* XXX There's a problem here: *static* functions are not supposed to have
+ a Py prefix (or use CapitalizedWords). Later... */
+
+/* Global variable holding the exception type for errors detected
+ by this module (but not argument type or memory errors, etc.). */
+static PyObject *socket_error;
+static PyObject *socket_herror;
+static PyObject *socket_gaierror;
+static PyObject *socket_timeout;
+
+#ifdef RISCOS
+/* Global variable which is !=0 if Python is running in a RISC OS taskwindow */
+static int taskwindow;
+#endif
+
+/* A forward reference to the socket type object.
+ The sock_type variable contains pointers to various functions,
+ some of which call new_sockobject(), which uses sock_type, so
+ there has to be a circular reference. */
+static PyTypeObject sock_type;
+
+#if defined(HAVE_POLL_H)
+#include <poll.h>
+#elif defined(HAVE_SYS_POLL_H)
+#include <sys/poll.h>
+#endif
+
+#ifdef Py_SOCKET_FD_CAN_BE_GE_FD_SETSIZE
+/* Platform can select file descriptors beyond FD_SETSIZE */
+#define IS_SELECTABLE(s) 1
+#elif defined(HAVE_POLL)
+/* Instead of select(), we'll use poll() since poll() works on any fd. */
+#define IS_SELECTABLE(s) 1
+/* Can we call select() with this socket without a buffer overrun? */
+#else
+/* POSIX says selecting file descriptors beyond FD_SETSIZE
+ has undefined behaviour. If there's no timeout left, we don't have to
+ call select, so it's a safe, little white lie. */
+#define IS_SELECTABLE(s) ((s)->sock_fd < FD_SETSIZE || s->sock_timeout <= 0.0)
+#endif
+
+static PyObject*
+select_error(void)
+{
+ PyErr_SetString(socket_error, "unable to select on socket");
+ return NULL;
+}
+
+/* Convenience function to raise an error according to errno
+ and return a NULL pointer from a function. */
+
+static PyObject *
+set_error(void)
+{
+#ifdef MS_WINDOWS
+ int err_no = WSAGetLastError();
+ /* PyErr_SetExcFromWindowsErr() invokes FormatMessage() which
+ recognizes the error codes used by both GetLastError() and
+ WSAGetLastError */
+ if (err_no)
+ return PyErr_SetExcFromWindowsErr(socket_error, err_no);
+#endif
+
+#if defined(PYOS_OS2) && !defined(PYCC_GCC)
+ if (sock_errno() != NO_ERROR) {
+ APIRET rc;
+ ULONG msglen;
+ char outbuf[100];
+ int myerrorcode = sock_errno();
+
+ /* Retrieve socket-related error message from MPTN.MSG file */
+ rc = DosGetMessage(NULL, 0, outbuf, sizeof(outbuf),
+ myerrorcode - SOCBASEERR + 26,
+ "mptn.msg",
+ &msglen);
+ if (rc == NO_ERROR) {
+ PyObject *v;
+
+ /* OS/2 doesn't guarantee a terminator */
+ outbuf[msglen] = '\0';
+ if (strlen(outbuf) > 0) {
+ /* If non-empty msg, trim CRLF */
+ char *lastc = &outbuf[ strlen(outbuf)-1 ];
+ while (lastc > outbuf &&
+ isspace(Py_CHARMASK(*lastc))) {
+ /* Trim trailing whitespace (CRLF) */
+ *lastc-- = '\0';
+ }
+ }
+ v = Py_BuildValue("(is)", myerrorcode, outbuf);
+ if (v != NULL) {
+ PyErr_SetObject(socket_error, v);
+ Py_DECREF(v);
+ }
+ return NULL;
+ }
+ }
+#endif
+
+#if defined(RISCOS)
+ if (_inet_error.errnum != NULL) {
+ PyObject *v;
+ v = Py_BuildValue("(is)", errno, _inet_err());
+ if (v != NULL) {
+ PyErr_SetObject(socket_error, v);
+ Py_DECREF(v);
+ }
+ return NULL;
+ }
+#endif
+
+ return PyErr_SetFromErrno(socket_error);
+}
+
+
+static PyObject *
+set_herror(int h_error)
+{
+ PyObject *v;
+
+#ifdef HAVE_HSTRERROR
+ v = Py_BuildValue("(is)", h_error, (char *)hstrerror(h_error));
+#else
+ v = Py_BuildValue("(is)", h_error, "host not found");
+#endif
+ if (v != NULL) {
+ PyErr_SetObject(socket_herror, v);
+ Py_DECREF(v);
+ }
+
+ return NULL;
+}
+
+
+static PyObject *
+set_gaierror(int error)
+{
+ PyObject *v;
+
+#ifdef EAI_SYSTEM
+ /* EAI_SYSTEM is not available on Windows XP. */
+ if (error == EAI_SYSTEM)
+ return set_error();
+#endif
+
+#ifdef HAVE_GAI_STRERROR
+ v = Py_BuildValue("(is)", error, gai_strerror(error));
+#else
+ v = Py_BuildValue("(is)", error, "getaddrinfo failed");
+#endif
+ if (v != NULL) {
+ PyErr_SetObject(socket_gaierror, v);
+ Py_DECREF(v);
+ }
+
+ return NULL;
+}
+
+#ifdef __VMS
+/* Function to send in segments */
+static int
+sendsegmented(int sock_fd, char *buf, int len, int flags)
+{
+ int n = 0;
+ int remaining = len;
+
+ while (remaining > 0) {
+ unsigned int segment;
+
+ segment = (remaining >= SEGMENT_SIZE ? SEGMENT_SIZE : remaining);
+ n = send(sock_fd, buf, segment, flags);
+ if (n < 0) {
+ return n;
+ }
+ remaining -= segment;
+ buf += segment;
+ } /* end while */
+
+ return len;
+}
+#endif
+
+/* Function to perform the setting of socket blocking mode
+ internally. block = (1 | 0). */
+static int
+internal_setblocking(PySocketSockObject *s, int block)
+{
+#ifndef RISCOS
+#ifndef MS_WINDOWS
+ int delay_flag;
+#endif
+#endif
+
+ Py_BEGIN_ALLOW_THREADS
+#ifdef __BEOS__
+ block = !block;
+ setsockopt(s->sock_fd, SOL_SOCKET, SO_NONBLOCK,
+ (void *)(&block), sizeof(int));
+#else
+#ifndef RISCOS
+#ifndef MS_WINDOWS
+#if defined(PYOS_OS2) && !defined(PYCC_GCC)
+ block = !block;
+ ioctl(s->sock_fd, FIONBIO, (caddr_t)&block, sizeof(block));
+#elif defined(__VMS)
+ block = !block;
+ ioctl(s->sock_fd, FIONBIO, (unsigned int *)&block);
+#else /* !PYOS_OS2 && !__VMS */
+ delay_flag = fcntl(s->sock_fd, F_GETFL, 0);
+ if (block)
+ delay_flag &= (~O_NONBLOCK);
+ else
+ delay_flag |= O_NONBLOCK;
+ fcntl(s->sock_fd, F_SETFL, delay_flag);
+#endif /* !PYOS_OS2 */
+#else /* MS_WINDOWS */
+ block = !block;
+ ioctlsocket(s->sock_fd, FIONBIO, (u_long*)&block);
+#endif /* MS_WINDOWS */
+#else /* RISCOS */
+ block = !block;
+ socketioctl(s->sock_fd, FIONBIO, (u_long*)&block);
+#endif /* RISCOS */
+#endif /* __BEOS__ */
+ Py_END_ALLOW_THREADS
+
+ /* Since these don't return anything */
+ return 1;
+}
+
+/* Do a select()/poll() on the socket, if necessary (sock_timeout > 0).
+ The argument writing indicates the direction.
+ This does not raise an exception; we'll let our caller do that
+ after they've reacquired the interpreter lock.
+ Returns 1 on timeout, -1 on error, 0 otherwise. */
+static int
+internal_select(PySocketSockObject *s, int writing)
+{
+ int n;
+
+ /* Nothing to do unless we're in timeout mode (not non-blocking) */
+ if (s->sock_timeout <= 0.0)
+ return 0;
+
+ /* Guard against closed socket */
+ if (s->sock_fd < 0)
+ return 0;
+
+ /* Prefer poll, if available, since you can poll() any fd
+ * which can't be done with select(). */
+#ifdef HAVE_POLL
+ {
+ struct pollfd pollfd;
+ int timeout;
+
+ pollfd.fd = s->sock_fd;
+ pollfd.events = writing ? POLLOUT : POLLIN;
+
+ /* s->sock_timeout is in seconds, timeout in ms */
+ timeout = (int)(s->sock_timeout * 1000 + 0.5);
+ n = poll(&pollfd, 1, timeout);
+ }
+#else
+ {
+ /* Construct the arguments to select */
+ fd_set fds;
+ struct timeval tv;
+ tv.tv_sec = (int)s->sock_timeout;
+ tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
+ FD_ZERO(&fds);
+ FD_SET(s->sock_fd, &fds);
+
+ /* See if the socket is ready */
+ if (writing)
+ n = select(s->sock_fd+1, NULL, &fds, NULL, &tv);
+ else
+ n = select(s->sock_fd+1, &fds, NULL, NULL, &tv);
+ }
+#endif
+
+ if (n < 0)
+ return -1;
+ if (n == 0)
+ return 1;
+ return 0;
+}
+
+/* Initialize a new socket object. */
+
+static double defaulttimeout = -1.0; /* Default timeout for new sockets */
+
+PyMODINIT_FUNC
+init_sockobject(PySocketSockObject *s,
+ SOCKET_T fd, int family, int type, int proto)
+{
+#ifdef RISCOS
+ int block = 1;
+#endif
+ s->sock_fd = fd;
+ s->sock_family = family;
+ s->sock_type = type;
+ s->sock_proto = proto;
+ s->sock_timeout = defaulttimeout;
+
+ s->errorhandler = &set_error;
+
+ if (defaulttimeout >= 0.0)
+ internal_setblocking(s, 0);
+
+#ifdef RISCOS
+ if (taskwindow)
+ socketioctl(s->sock_fd, 0x80046679, (u_long*)&block);
+#endif
+}
+
+
+/* Create a new socket object.
+ This just creates the object and initializes it.
+ If the creation fails, return NULL and set an exception (implicit
+ in NEWOBJ()). */
+
+static PySocketSockObject *
+new_sockobject(SOCKET_T fd, int family, int type, int proto)
+{
+ PySocketSockObject *s;
+ s = (PySocketSockObject *)
+ PyType_GenericNew(&sock_type, NULL, NULL);
+ if (s != NULL)
+ init_sockobject(s, fd, family, type, proto);
+ return s;
+}
+
+
+/* Lock to allow python interpreter to continue, but only allow one
+ thread to be in gethostbyname or getaddrinfo */
+#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
+PyThread_type_lock netdb_lock;
+#endif
+
+
+/* Convert a string specifying a host name or one of a few symbolic
+ names to a numeric IP address. This usually calls gethostbyname()
+ to do the work; the names "" and "<broadcast>" are special.
+ Return the length (IPv4 should be 4 bytes), or negative if
+ an error occurred; then an exception is raised. */
+
+static int
+setipaddr(char *name, struct sockaddr *addr_ret, size_t addr_ret_size, int af)
+{
+ struct addrinfo hints, *res;
+ int error;
+ int d1, d2, d3, d4;
+ char ch;
+
+ memset((void *) addr_ret, '\0', sizeof(*addr_ret));
+ if (name[0] == '\0') {
+ int siz;
+ memset(&hints, 0, sizeof(hints));
+ hints.ai_family = af;
+ hints.ai_socktype = SOCK_DGRAM; /*dummy*/
+ hints.ai_flags = AI_PASSIVE;
+ Py_BEGIN_ALLOW_THREADS
+ ACQUIRE_GETADDRINFO_LOCK
+ error = getaddrinfo(NULL, "0", &hints, &res);
+ Py_END_ALLOW_THREADS
+ /* We assume that those thread-unsafe getaddrinfo() versions
+ *are* safe regarding their return value, ie. that a
+ subsequent call to getaddrinfo() does not destroy the
+ outcome of the first call. */
+ RELEASE_GETADDRINFO_LOCK
+ if (error) {
+ set_gaierror(error);
+ return -1;
+ }
+ switch (res->ai_family) {
+ case AF_INET:
+ siz = 4;
+ break;
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ siz = 16;
+ break;
+#endif
+ default:
+ freeaddrinfo(res);
+ PyErr_SetString(socket_error,
+ "unsupported address family");
+ return -1;
+ }
+ if (res->ai_next) {
+ freeaddrinfo(res);
+ PyErr_SetString(socket_error,
+ "wildcard resolved to multiple address");
+ return -1;
+ }
+ if (res->ai_addrlen < addr_ret_size)
+ addr_ret_size = res->ai_addrlen;
+ memcpy(addr_ret, res->ai_addr, addr_ret_size);
+ freeaddrinfo(res);
+ return siz;
+ }
+ if (name[0] == '<' && strcmp(name, "<broadcast>") == 0) {
+ struct sockaddr_in *sin;
+ if (af != AF_INET && af != AF_UNSPEC) {
+ PyErr_SetString(socket_error,
+ "address family mismatched");
+ return -1;
+ }
+ sin = (struct sockaddr_in *)addr_ret;
+ memset((void *) sin, '\0', sizeof(*sin));
+ sin->sin_family = AF_INET;
+#ifdef HAVE_SOCKADDR_SA_LEN
+ sin->sin_len = sizeof(*sin);
+#endif
+ sin->sin_addr.s_addr = INADDR_BROADCAST;
+ return sizeof(sin->sin_addr);
+ }
+ if (sscanf(name, "%d.%d.%d.%d%c", &d1, &d2, &d3, &d4, &ch) == 4 &&
+ 0 <= d1 && d1 <= 255 && 0 <= d2 && d2 <= 255 &&
+ 0 <= d3 && d3 <= 255 && 0 <= d4 && d4 <= 255) {
+ struct sockaddr_in *sin;
+ sin = (struct sockaddr_in *)addr_ret;
+ sin->sin_addr.s_addr = htonl(
+ ((long) d1 << 24) | ((long) d2 << 16) |
+ ((long) d3 << 8) | ((long) d4 << 0));
+ sin->sin_family = AF_INET;
+#ifdef HAVE_SOCKADDR_SA_LEN
+ sin->sin_len = sizeof(*sin);
+#endif
+ return 4;
+ }
+ memset(&hints, 0, sizeof(hints));
+ hints.ai_family = af;
+ Py_BEGIN_ALLOW_THREADS
+ ACQUIRE_GETADDRINFO_LOCK
+ error = getaddrinfo(name, NULL, &hints, &res);
+#if defined(__digital__) && defined(__unix__)
+ if (error == EAI_NONAME && af == AF_UNSPEC) {
+ /* On Tru64 V5.1, numeric-to-addr conversion fails
+ if no address family is given. Assume IPv4 for now.*/
+ hints.ai_family = AF_INET;
+ error = getaddrinfo(name, NULL, &hints, &res);
+ }
+#endif
+ Py_END_ALLOW_THREADS
+ RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
+ if (error) {
+ set_gaierror(error);
+ return -1;
+ }
+ if (res->ai_addrlen < addr_ret_size)
+ addr_ret_size = res->ai_addrlen;
+ memcpy((char *) addr_ret, res->ai_addr, addr_ret_size);
+ freeaddrinfo(res);
+ switch (addr_ret->sa_family) {
+ case AF_INET:
+ return 4;
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ return 16;
+#endif
+ default:
+ PyErr_SetString(socket_error, "unknown address family");
+ return -1;
+ }
+}
+
+
+/* Create a string object representing an IP address.
+ This is always a string of the form 'dd.dd.dd.dd' (with variable
+ size numbers). */
+
+static PyObject *
+makeipaddr(struct sockaddr *addr, int addrlen)
+{
+ char buf[NI_MAXHOST];
+ int error;
+
+ error = getnameinfo(addr, addrlen, buf, sizeof(buf), NULL, 0,
+ NI_NUMERICHOST);
+ if (error) {
+ set_gaierror(error);
+ return NULL;
+ }
+ return PyString_FromString(buf);
+}
+
+
+#ifdef USE_BLUETOOTH
+/* Convert a string representation of a Bluetooth address into a numeric
+ address. Returns the length (6), or raises an exception and returns -1 if
+ an error occurred. */
+
+static int
+setbdaddr(char *name, bdaddr_t *bdaddr)
+{
+ unsigned int b0, b1, b2, b3, b4, b5;
+ char ch;
+ int n;
+
+ n = sscanf(name, "%X:%X:%X:%X:%X:%X%c",
+ &b5, &b4, &b3, &b2, &b1, &b0, &ch);
+ if (n == 6 && (b0 | b1 | b2 | b3 | b4 | b5) < 256) {
+ bdaddr->b[0] = b0;
+ bdaddr->b[1] = b1;
+ bdaddr->b[2] = b2;
+ bdaddr->b[3] = b3;
+ bdaddr->b[4] = b4;
+ bdaddr->b[5] = b5;
+ return 6;
+ } else {
+ PyErr_SetString(socket_error, "bad bluetooth address");
+ return -1;
+ }
+}
+
+/* Create a string representation of the Bluetooth address. This is always a
+ string of the form 'XX:XX:XX:XX:XX:XX' where XX is a two digit hexadecimal
+ value (zero padded if necessary). */
+
+static PyObject *
+makebdaddr(bdaddr_t *bdaddr)
+{
+ char buf[(6 * 2) + 5 + 1];
+
+ sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",
+ bdaddr->b[5], bdaddr->b[4], bdaddr->b[3],
+ bdaddr->b[2], bdaddr->b[1], bdaddr->b[0]);
+ return PyString_FromString(buf);
+}
+#endif
+
+
+/* Create an object representing the given socket address,
+ suitable for passing it back to bind(), connect() etc.
+ The family field of the sockaddr structure is inspected
+ to determine what kind of address it really is. */
+
+/*ARGSUSED*/
+static PyObject *
+makesockaddr(int sockfd, struct sockaddr *addr, int addrlen, int proto)
+{
+ if (addrlen == 0) {
+ /* No address -- may be recvfrom() from known socket */
+ Py_INCREF(Py_None);
+ return Py_None;
+ }
+
+#ifdef __BEOS__
+ /* XXX: BeOS version of accept() doesn't set family correctly */
+ addr->sa_family = AF_INET;
+#endif
+
+ switch (addr->sa_family) {
+
+ case AF_INET:
+ {
+ struct sockaddr_in *a;
+ PyObject *addrobj = makeipaddr(addr, sizeof(*a));
+ PyObject *ret = NULL;
+ if (addrobj) {
+ a = (struct sockaddr_in *)addr;
+ ret = Py_BuildValue("Oi", addrobj, ntohs(a->sin_port));
+ Py_DECREF(addrobj);
+ }
+ return ret;
+ }
+
+#if defined(AF_UNIX)
+ case AF_UNIX:
+ {
+ struct sockaddr_un *a = (struct sockaddr_un *) addr;
+#ifdef linux
+ if (a->sun_path[0] == 0) { /* Linux abstract namespace */
+ addrlen -= offsetof(struct sockaddr_un, sun_path);
+ return PyString_FromStringAndSize(a->sun_path,
+ addrlen);
+ }
+ else
+#endif /* linux */
+ {
+ /* regular NULL-terminated string */
+ return PyString_FromString(a->sun_path);
+ }
+ }
+#endif /* AF_UNIX */
+
+#if defined(AF_NETLINK)
+ case AF_NETLINK:
+ {
+ struct sockaddr_nl *a = (struct sockaddr_nl *) addr;
+ return Py_BuildValue("II", a->nl_pid, a->nl_groups);
+ }
+#endif /* AF_NETLINK */
+
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ {
+ struct sockaddr_in6 *a;
+ PyObject *addrobj = makeipaddr(addr, sizeof(*a));
+ PyObject *ret = NULL;
+ if (addrobj) {
+ a = (struct sockaddr_in6 *)addr;
+ ret = Py_BuildValue("Oiii",
+ addrobj,
+ ntohs(a->sin6_port),
+ a->sin6_flowinfo,
+ a->sin6_scope_id);
+ Py_DECREF(addrobj);
+ }
+ return ret;
+ }
+#endif
+
+#ifdef USE_BLUETOOTH
+ case AF_BLUETOOTH:
+ switch (proto) {
+
+ case BTPROTO_L2CAP:
+ {
+ struct sockaddr_l2 *a = (struct sockaddr_l2 *) addr;
+ PyObject *addrobj = makebdaddr(&_BT_L2_MEMB(a, bdaddr));
+ PyObject *ret = NULL;
+ if (addrobj) {
+ ret = Py_BuildValue("Oi",
+ addrobj,
+ _BT_L2_MEMB(a, psm));
+ Py_DECREF(addrobj);
+ }
+ return ret;
+ }
+
+ case BTPROTO_RFCOMM:
+ {
+ struct sockaddr_rc *a = (struct sockaddr_rc *) addr;
+ PyObject *addrobj = makebdaddr(&_BT_RC_MEMB(a, bdaddr));
+ PyObject *ret = NULL;
+ if (addrobj) {
+ ret = Py_BuildValue("Oi",
+ addrobj,
+ _BT_RC_MEMB(a, channel));
+ Py_DECREF(addrobj);
+ }
+ return ret;
+ }
+
+ case BTPROTO_HCI:
+ {
+ struct sockaddr_hci *a = (struct sockaddr_hci *) addr;
+ PyObject *ret = NULL;
+ ret = Py_BuildValue("i", _BT_HCI_MEMB(a, dev));
+ return ret;
+ }
+
+#if !defined(__FreeBSD__)
+ case BTPROTO_SCO:
+ {
+ struct sockaddr_sco *a = (struct sockaddr_sco *) addr;
+ return makebdaddr(&_BT_SCO_MEMB(a, bdaddr));
+ }
+#endif
+
+ }
+#endif
+
+#ifdef HAVE_NETPACKET_PACKET_H
+ case AF_PACKET:
+ {
+ struct sockaddr_ll *a = (struct sockaddr_ll *)addr;
+ char *ifname = "";
+ struct ifreq ifr;
+ /* need to look up interface name give index */
+ if (a->sll_ifindex) {
+ ifr.ifr_ifindex = a->sll_ifindex;
+ if (ioctl(sockfd, SIOCGIFNAME, &ifr) == 0)
+ ifname = ifr.ifr_name;
+ }
+ return Py_BuildValue("shbhs#",
+ ifname,
+ ntohs(a->sll_protocol),
+ a->sll_pkttype,
+ a->sll_hatype,
+ a->sll_addr,
+ a->sll_halen);
+ }
+#endif
+
+#ifdef HAVE_LINUX_TIPC_H
+ case AF_TIPC:
+ {
+ struct sockaddr_tipc *a = (struct sockaddr_tipc *) addr;
+ if (a->addrtype == TIPC_ADDR_NAMESEQ) {
+ return Py_BuildValue("IIIII",
+ a->addrtype,
+ a->addr.nameseq.type,
+ a->addr.nameseq.lower,
+ a->addr.nameseq.upper,
+ a->scope);
+ } else if (a->addrtype == TIPC_ADDR_NAME) {
+ return Py_BuildValue("IIIII",
+ a->addrtype,
+ a->addr.name.name.type,
+ a->addr.name.name.instance,
+ a->addr.name.name.instance,
+ a->scope);
+ } else if (a->addrtype == TIPC_ADDR_ID) {
+ return Py_BuildValue("IIIII",
+ a->addrtype,
+ a->addr.id.node,
+ a->addr.id.ref,
+ 0,
+ a->scope);
+ } else {
+ PyErr_SetString(PyExc_TypeError,
+ "Invalid address type");
+ return NULL;
+ }
+ }
+#endif
+
+ /* More cases here... */
+
+ default:
+ /* If we don't know the address family, don't raise an
+ exception -- return it as a tuple. */
+ return Py_BuildValue("is#",
+ addr->sa_family,
+ addr->sa_data,
+ sizeof(addr->sa_data));
+
+ }
+}
+
+
+/* Parse a socket address argument according to the socket object's
+ address family. Return 1 if the address was in the proper format,
+ 0 of not. The address is returned through addr_ret, its length
+ through len_ret. */
+
+static int
+getsockaddrarg(PySocketSockObject *s, PyObject *args,
+ struct sockaddr *addr_ret, int *len_ret)
+{
+ switch (s->sock_family) {
+
+#if defined(AF_UNIX)
+ case AF_UNIX:
+ {
+ struct sockaddr_un* addr;
+ char *path;
+ int len;
+ if (!PyArg_Parse(args, "t#", &path, &len))
+ return 0;
+
+ addr = (struct sockaddr_un*)addr_ret;
+#ifdef linux
+ if (len > 0 && path[0] == 0) {
+ /* Linux abstract namespace extension */
+ if (len > sizeof addr->sun_path) {
+ PyErr_SetString(socket_error,
+ "AF_UNIX path too long");
+ return 0;
+ }
+ }
+ else
+#endif /* linux */
+ {
+ /* regular NULL-terminated string */
+ if (len >= sizeof addr->sun_path) {
+ PyErr_SetString(socket_error,
+ "AF_UNIX path too long");
+ return 0;
+ }
+ addr->sun_path[len] = 0;
+ }
+ addr->sun_family = s->sock_family;
+ memcpy(addr->sun_path, path, len);
+#if defined(PYOS_OS2)
+ *len_ret = sizeof(*addr);
+#else
+ *len_ret = len + offsetof(struct sockaddr_un, sun_path);
+#endif
+ return 1;
+ }
+#endif /* AF_UNIX */
+
+#if defined(AF_NETLINK)
+ case AF_NETLINK:
+ {
+ struct sockaddr_nl* addr;
+ int pid, groups;
+ addr = (struct sockaddr_nl *)addr_ret;
+ if (!PyTuple_Check(args)) {
+ PyErr_Format(
+ PyExc_TypeError,
+ "getsockaddrarg: "
+ "AF_NETLINK address must be tuple, not %.500s",
+ Py_TYPE(args)->tp_name);
+ return 0;
+ }
+ if (!PyArg_ParseTuple(args, "II:getsockaddrarg", &pid, &groups))
+ return 0;
+ addr->nl_family = AF_NETLINK;
+ addr->nl_pid = pid;
+ addr->nl_groups = groups;
+ *len_ret = sizeof(*addr);
+ return 1;
+ }
+#endif
+
+ case AF_INET:
+ {
+ struct sockaddr_in* addr;
+ char *host;
+ int port, result;
+ if (!PyTuple_Check(args)) {
+ PyErr_Format(
+ PyExc_TypeError,
+ "getsockaddrarg: "
+ "AF_INET address must be tuple, not %.500s",
+ Py_TYPE(args)->tp_name);
+ return 0;
+ }
+ if (!PyArg_ParseTuple(args, "eti:getsockaddrarg",
+ "idna", &host, &port))
+ return 0;
+ addr=(struct sockaddr_in*)addr_ret;
+ result = setipaddr(host, (struct sockaddr *)addr,
+ sizeof(*addr), AF_INET);
+ PyMem_Free(host);
+ if (result < 0)
+ return 0;
+ addr->sin_family = AF_INET;
+ addr->sin_port = htons((short)port);
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ {
+ struct sockaddr_in6* addr;
+ char *host;
+ int port, flowinfo, scope_id, result;
+ flowinfo = scope_id = 0;
+ if (!PyTuple_Check(args)) {
+ PyErr_Format(
+ PyExc_TypeError,
+ "getsockaddrarg: "
+ "AF_INET6 address must be tuple, not %.500s",
+ Py_TYPE(args)->tp_name);
+ return 0;
+ }
+ if (!PyArg_ParseTuple(args, "eti|ii",
+ "idna", &host, &port, &flowinfo,
+ &scope_id)) {
+ return 0;
+ }
+ addr = (struct sockaddr_in6*)addr_ret;
+ result = setipaddr(host, (struct sockaddr *)addr,
+ sizeof(*addr), AF_INET6);
+ PyMem_Free(host);
+ if (result < 0)
+ return 0;
+ addr->sin6_family = s->sock_family;
+ addr->sin6_port = htons((short)port);
+ addr->sin6_flowinfo = flowinfo;
+ addr->sin6_scope_id = scope_id;
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+#endif
+
+#ifdef USE_BLUETOOTH
+ case AF_BLUETOOTH:
+ {
+ switch (s->sock_proto) {
+ case BTPROTO_L2CAP:
+ {
+ struct sockaddr_l2 *addr;
+ char *straddr;
+
+ addr = (struct sockaddr_l2 *)addr_ret;
+ _BT_L2_MEMB(addr, family) = AF_BLUETOOTH;
+ if (!PyArg_ParseTuple(args, "si", &straddr,
+ &_BT_L2_MEMB(addr, psm))) {
+ PyErr_SetString(socket_error, "getsockaddrarg: "
+ "wrong format");
+ return 0;
+ }
+ if (setbdaddr(straddr, &_BT_L2_MEMB(addr, bdaddr)) < 0)
+ return 0;
+
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+ case BTPROTO_RFCOMM:
+ {
+ struct sockaddr_rc *addr;
+ char *straddr;
+
+ addr = (struct sockaddr_rc *)addr_ret;
+ _BT_RC_MEMB(addr, family) = AF_BLUETOOTH;
+ if (!PyArg_ParseTuple(args, "si", &straddr,
+ &_BT_RC_MEMB(addr, channel))) {
+ PyErr_SetString(socket_error, "getsockaddrarg: "
+ "wrong format");
+ return 0;
+ }
+ if (setbdaddr(straddr, &_BT_RC_MEMB(addr, bdaddr)) < 0)
+ return 0;
+
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+ case BTPROTO_HCI:
+ {
+ struct sockaddr_hci *addr = (struct sockaddr_hci *)addr_ret;
+ _BT_HCI_MEMB(addr, family) = AF_BLUETOOTH;
+ if (!PyArg_ParseTuple(args, "i", &_BT_HCI_MEMB(addr, dev))) {
+ PyErr_SetString(socket_error, "getsockaddrarg: "
+ "wrong format");
+ return 0;
+ }
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+#if !defined(__FreeBSD__)
+ case BTPROTO_SCO:
+ {
+ struct sockaddr_sco *addr;
+ char *straddr;
+
+ addr = (struct sockaddr_sco *)addr_ret;
+ _BT_SCO_MEMB(addr, family) = AF_BLUETOOTH;
+ straddr = PyString_AsString(args);
+ if (straddr == NULL) {
+ PyErr_SetString(socket_error, "getsockaddrarg: "
+ "wrong format");
+ return 0;
+ }
+ if (setbdaddr(straddr, &_BT_SCO_MEMB(addr, bdaddr)) < 0)
+ return 0;
+
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+#endif
+ default:
+ PyErr_SetString(socket_error, "getsockaddrarg: unknown Bluetooth protocol");
+ return 0;
+ }
+ }
+#endif
+
+#ifdef HAVE_NETPACKET_PACKET_H
+ case AF_PACKET:
+ {
+ struct sockaddr_ll* addr;
+ struct ifreq ifr;
+ char *interfaceName;
+ int protoNumber;
+ int hatype = 0;
+ int pkttype = 0;
+ char *haddr = NULL;
+ unsigned int halen = 0;
+
+ if (!PyTuple_Check(args)) {
+ PyErr_Format(
+ PyExc_TypeError,
+ "getsockaddrarg: "
+ "AF_PACKET address must be tuple, not %.500s",
+ Py_TYPE(args)->tp_name);
+ return 0;
+ }
+ if (!PyArg_ParseTuple(args, "si|iis#", &interfaceName,
+ &protoNumber, &pkttype, &hatype,
+ &haddr, &halen))
+ return 0;
+ strncpy(ifr.ifr_name, interfaceName, sizeof(ifr.ifr_name));
+ ifr.ifr_name[(sizeof(ifr.ifr_name))-1] = '\0';
+ if (ioctl(s->sock_fd, SIOCGIFINDEX, &ifr) < 0) {
+ s->errorhandler();
+ return 0;
+ }
+ if (halen > 8) {
+ PyErr_SetString(PyExc_ValueError,
+ "Hardware address must be 8 bytes or less");
+ return 0;
+ }
+ addr = (struct sockaddr_ll*)addr_ret;
+ addr->sll_family = AF_PACKET;
+ addr->sll_protocol = htons((short)protoNumber);
+ addr->sll_ifindex = ifr.ifr_ifindex;
+ addr->sll_pkttype = pkttype;
+ addr->sll_hatype = hatype;
+ if (halen != 0) {
+ memcpy(&addr->sll_addr, haddr, halen);
+ }
+ addr->sll_halen = halen;
+ *len_ret = sizeof *addr;
+ return 1;
+ }
+#endif
+
+#ifdef HAVE_LINUX_TIPC_H
+ case AF_TIPC:
+ {
+ unsigned int atype, v1, v2, v3;
+ unsigned int scope = TIPC_CLUSTER_SCOPE;
+ struct sockaddr_tipc *addr;
+
+ if (!PyTuple_Check(args)) {
+ PyErr_Format(
+ PyExc_TypeError,
+ "getsockaddrarg: "
+ "AF_TIPC address must be tuple, not %.500s",
+ Py_TYPE(args)->tp_name);
+ return 0;
+ }
+
+ if (!PyArg_ParseTuple(args,
+ "IIII|I;Invalid TIPC address format",
+ &atype, &v1, &v2, &v3, &scope))
+ return 0;
+
+ addr = (struct sockaddr_tipc *) addr_ret;
+ memset(addr, 0, sizeof(struct sockaddr_tipc));
+
+ addr->family = AF_TIPC;
+ addr->scope = scope;
+ addr->addrtype = atype;
+
+ if (atype == TIPC_ADDR_NAMESEQ) {
+ addr->addr.nameseq.type = v1;
+ addr->addr.nameseq.lower = v2;
+ addr->addr.nameseq.upper = v3;
+ } else if (atype == TIPC_ADDR_NAME) {
+ addr->addr.name.name.type = v1;
+ addr->addr.name.name.instance = v2;
+ } else if (atype == TIPC_ADDR_ID) {
+ addr->addr.id.node = v1;
+ addr->addr.id.ref = v2;
+ } else {
+ /* Shouldn't happen */
+ PyErr_SetString(PyExc_TypeError, "Invalid address type");
+ return 0;
+ }
+
+ *len_ret = sizeof(*addr);
+
+ return 1;
+ }
+#endif
+
+ /* More cases here... */
+
+ default:
+ PyErr_SetString(socket_error, "getsockaddrarg: bad family");
+ return 0;
+
+ }
+}
+
+
+/* Get the address length according to the socket object's address family.
+ Return 1 if the family is known, 0 otherwise. The length is returned
+ through len_ret. */
+
+static int
+getsockaddrlen(PySocketSockObject *s, socklen_t *len_ret)
+{
+ switch (s->sock_family) {
+
+#if defined(AF_UNIX)
+ case AF_UNIX:
+ {
+ *len_ret = sizeof (struct sockaddr_un);
+ return 1;
+ }
+#endif /* AF_UNIX */
+#if defined(AF_NETLINK)
+ case AF_NETLINK:
+ {
+ *len_ret = sizeof (struct sockaddr_nl);
+ return 1;
+ }
+#endif
+
+ case AF_INET:
+ {
+ *len_ret = sizeof (struct sockaddr_in);
+ return 1;
+ }
+
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ {
+ *len_ret = sizeof (struct sockaddr_in6);
+ return 1;
+ }
+#endif
+
+#ifdef USE_BLUETOOTH
+ case AF_BLUETOOTH:
+ {
+ switch(s->sock_proto)
+ {
+
+ case BTPROTO_L2CAP:
+ *len_ret = sizeof (struct sockaddr_l2);
+ return 1;
+ case BTPROTO_RFCOMM:
+ *len_ret = sizeof (struct sockaddr_rc);
+ return 1;
+ case BTPROTO_HCI:
+ *len_ret = sizeof (struct sockaddr_hci);
+ return 1;
+#if !defined(__FreeBSD__)
+ case BTPROTO_SCO:
+ *len_ret = sizeof (struct sockaddr_sco);
+ return 1;
+#endif
+ default:
+ PyErr_SetString(socket_error, "getsockaddrlen: "
+ "unknown BT protocol");
+ return 0;
+
+ }
+ }
+#endif
+
+#ifdef HAVE_NETPACKET_PACKET_H
+ case AF_PACKET:
+ {
+ *len_ret = sizeof (struct sockaddr_ll);
+ return 1;
+ }
+#endif
+
+#ifdef HAVE_LINUX_TIPC_H
+ case AF_TIPC:
+ {
+ *len_ret = sizeof (struct sockaddr_tipc);
+ return 1;
+ }
+#endif
+
+ /* More cases here... */
+
+ default:
+ PyErr_SetString(socket_error, "getsockaddrlen: bad family");
+ return 0;
+
+ }
+}
+
+
+/* s.accept() method */
+
+static PyObject *
+sock_accept(PySocketSockObject *s)
+{
+ sock_addr_t addrbuf;
+ SOCKET_T newfd;
+ socklen_t addrlen;
+ PyObject *sock = NULL;
+ PyObject *addr = NULL;
+ PyObject *res = NULL;
+ int timeout;
+
+ if (!getsockaddrlen(s, &addrlen))
+ return NULL;
+ memset(&addrbuf, 0, addrlen);
+
+#ifdef MS_WINDOWS
+ newfd = INVALID_SOCKET;
+#else
+ newfd = -1;
+#endif
+
+ if (!IS_SELECTABLE(s))
+ return select_error();
+
+ Py_BEGIN_ALLOW_THREADS
+ timeout = internal_select(s, 0);
+ if (!timeout)
+ newfd = accept(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
+ Py_END_ALLOW_THREADS
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return NULL;
+ }
+
+#ifdef MS_WINDOWS
+ if (newfd == INVALID_SOCKET)
+#else
+ if (newfd < 0)
+#endif
+ return s->errorhandler();
+
+ /* Create the new object with unspecified family,
+ to avoid calls to bind() etc. on it. */
+ sock = (PyObject *) new_sockobject(newfd,
+ s->sock_family,
+ s->sock_type,
+ s->sock_proto);
+
+ if (sock == NULL) {
+ SOCKETCLOSE(newfd);
+ goto finally;
+ }
+ addr = makesockaddr(s->sock_fd, SAS2SA(&addrbuf),
+ addrlen, s->sock_proto);
+ if (addr == NULL)
+ goto finally;
+
+ res = PyTuple_Pack(2, sock, addr);
+
+finally:
+ Py_XDECREF(sock);
+ Py_XDECREF(addr);
+ return res;
+}
+
+PyDoc_STRVAR(accept_doc,
+"accept() -> (socket object, address info)\n\
+\n\
+Wait for an incoming connection. Return a new socket representing the\n\
+connection, and the address of the client. For IP sockets, the address\n\
+info is a pair (hostaddr, port).");
+
+/* s.setblocking(flag) method. Argument:
+ False -- non-blocking mode; same as settimeout(0)
+ True -- blocking mode; same as settimeout(None)
+*/
+
+static PyObject *
+sock_setblocking(PySocketSockObject *s, PyObject *arg)
+{
+ int block;
+
+ block = PyInt_AsLong(arg);
+ if (block == -1 && PyErr_Occurred())
+ return NULL;
+
+ s->sock_timeout = block ? -1.0 : 0.0;
+ internal_setblocking(s, block);
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(setblocking_doc,
+"setblocking(flag)\n\
+\n\
+Set the socket to blocking (flag is true) or non-blocking (false).\n\
+setblocking(True) is equivalent to settimeout(None);\n\
+setblocking(False) is equivalent to settimeout(0.0).");
+
+/* s.settimeout(timeout) method. Argument:
+ None -- no timeout, blocking mode; same as setblocking(True)
+ 0.0 -- non-blocking mode; same as setblocking(False)
+ > 0 -- timeout mode; operations time out after timeout seconds
+ < 0 -- illegal; raises an exception
+*/
+static PyObject *
+sock_settimeout(PySocketSockObject *s, PyObject *arg)
+{
+ double timeout;
+
+ if (arg == Py_None)
+ timeout = -1.0;
+ else {
+ timeout = PyFloat_AsDouble(arg);
+ if (timeout < 0.0) {
+ if (!PyErr_Occurred())
+ PyErr_SetString(PyExc_ValueError,
+ "Timeout value out of range");
+ return NULL;
+ }
+ }
+
+ s->sock_timeout = timeout;
+ internal_setblocking(s, timeout < 0.0);
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(settimeout_doc,
+"settimeout(timeout)\n\
+\n\
+Set a timeout on socket operations. 'timeout' can be a float,\n\
+giving in seconds, or None. Setting a timeout of None disables\n\
+the timeout feature and is equivalent to setblocking(1).\n\
+Setting a timeout of zero is the same as setblocking(0).");
+
+/* s.gettimeout() method.
+ Returns the timeout associated with a socket. */
+static PyObject *
+sock_gettimeout(PySocketSockObject *s)
+{
+ if (s->sock_timeout < 0.0) {
+ Py_INCREF(Py_None);
+ return Py_None;
+ }
+ else
+ return PyFloat_FromDouble(s->sock_timeout);
+}
+
+PyDoc_STRVAR(gettimeout_doc,
+"gettimeout() -> timeout\n\
+\n\
+Returns the timeout in floating seconds associated with socket \n\
+operations. A timeout of None indicates that timeouts on socket \n\
+operations are disabled.");
+
+#ifdef RISCOS
+/* s.sleeptaskw(1 | 0) method */
+
+static PyObject *
+sock_sleeptaskw(PySocketSockObject *s,PyObject *arg)
+{
+ int block;
+ block = PyInt_AsLong(arg);
+ if (block == -1 && PyErr_Occurred())
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ socketioctl(s->sock_fd, 0x80046679, (u_long*)&block);
+ Py_END_ALLOW_THREADS
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+PyDoc_STRVAR(sleeptaskw_doc,
+"sleeptaskw(flag)\n\
+\n\
+Allow sleeps in taskwindows.");
+#endif
+
+
+/* s.setsockopt() method.
+ With an integer third argument, sets an integer option.
+ With a string third argument, sets an option from a buffer;
+ use optional built-in module 'struct' to encode the string. */
+
+static PyObject *
+sock_setsockopt(PySocketSockObject *s, PyObject *args)
+{
+ int level;
+ int optname;
+ int res;
+ char *buf;
+ int buflen;
+ int flag;
+
+ if (PyArg_ParseTuple(args, "iii:setsockopt",
+ &level, &optname, &flag)) {
+ buf = (char *) &flag;
+ buflen = sizeof flag;
+ }
+ else {
+ PyErr_Clear();
+ if (!PyArg_ParseTuple(args, "iis#:setsockopt",
+ &level, &optname, &buf, &buflen))
+ return NULL;
+ }
+ res = setsockopt(s->sock_fd, level, optname, (void *)buf, buflen);
+ if (res < 0)
+ return s->errorhandler();
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(setsockopt_doc,
+"setsockopt(level, option, value)\n\
+\n\
+Set a socket option. See the Unix manual for level and option.\n\
+The value argument can either be an integer or a string.");
+
+
+/* s.getsockopt() method.
+ With two arguments, retrieves an integer option.
+ With a third integer argument, retrieves a string buffer of that size;
+ use optional built-in module 'struct' to decode the string. */
+
+static PyObject *
+sock_getsockopt(PySocketSockObject *s, PyObject *args)
+{
+ int level;
+ int optname;
+ int res;
+ PyObject *buf;
+ socklen_t buflen = 0;
+
+#ifdef __BEOS__
+ /* We have incomplete socket support. */
+ PyErr_SetString(socket_error, "getsockopt not supported");
+ return NULL;
+#else
+
+ if (!PyArg_ParseTuple(args, "ii|i:getsockopt",
+ &level, &optname, &buflen))
+ return NULL;
+
+ if (buflen == 0) {
+ int flag = 0;
+ socklen_t flagsize = sizeof flag;
+ res = getsockopt(s->sock_fd, level, optname,
+ (void *)&flag, &flagsize);
+ if (res < 0)
+ return s->errorhandler();
+ return PyInt_FromLong(flag);
+ }
+#ifdef __VMS
+ /* socklen_t is unsigned so no negative test is needed,
+ test buflen == 0 is previously done */
+ if (buflen > 1024) {
+#else
+ if (buflen <= 0 || buflen > 1024) {
+#endif
+ PyErr_SetString(socket_error,
+ "getsockopt buflen out of range");
+ return NULL;
+ }
+ buf = PyString_FromStringAndSize((char *)NULL, buflen);
+ if (buf == NULL)
+ return NULL;
+ res = getsockopt(s->sock_fd, level, optname,
+ (void *)PyString_AS_STRING(buf), &buflen);
+ if (res < 0) {
+ Py_DECREF(buf);
+ return s->errorhandler();
+ }
+ _PyString_Resize(&buf, buflen);
+ return buf;
+#endif /* __BEOS__ */
+}
+
+PyDoc_STRVAR(getsockopt_doc,
+"getsockopt(level, option[, buffersize]) -> value\n\
+\n\
+Get a socket option. See the Unix manual for level and option.\n\
+If a nonzero buffersize argument is given, the return value is a\n\
+string of that length; otherwise it is an integer.");
+
+
+/* s.bind(sockaddr) method */
+
+static PyObject *
+sock_bind(PySocketSockObject *s, PyObject *addro)
+{
+ sock_addr_t addrbuf;
+ int addrlen;
+ int res;
+
+ if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ res = bind(s->sock_fd, SAS2SA(&addrbuf), addrlen);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return s->errorhandler();
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(bind_doc,
+"bind(address)\n\
+\n\
+Bind the socket to a local address. For IP sockets, the address is a\n\
+pair (host, port); the host must refer to the local host. For raw packet\n\
+sockets the address is a tuple (ifname, proto [,pkttype [,hatype]])");
+
+
+/* s.close() method.
+ Set the file descriptor to -1 so operations tried subsequently
+ will surely fail. */
+
+static PyObject *
+sock_close(PySocketSockObject *s)
+{
+ SOCKET_T fd;
+
+ if ((fd = s->sock_fd) != -1) {
+ s->sock_fd = -1;
+ Py_BEGIN_ALLOW_THREADS
+ (void) SOCKETCLOSE(fd);
+ Py_END_ALLOW_THREADS
+ }
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(close_doc,
+"close()\n\
+\n\
+Close the socket. It cannot be used after this call.");
+
+static int
+internal_connect(PySocketSockObject *s, struct sockaddr *addr, int addrlen,
+ int *timeoutp)
+{
+ int res, timeout;
+
+ timeout = 0;
+ res = connect(s->sock_fd, addr, addrlen);
+
+#ifdef MS_WINDOWS
+
+ if (s->sock_timeout > 0.0) {
+ if (res < 0 && WSAGetLastError() == WSAEWOULDBLOCK &&
+ IS_SELECTABLE(s)) {
+ /* This is a mess. Best solution: trust select */
+ fd_set fds;
+ fd_set fds_exc;
+ struct timeval tv;
+ tv.tv_sec = (int)s->sock_timeout;
+ tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
+ FD_ZERO(&fds);
+ FD_SET(s->sock_fd, &fds);
+ FD_ZERO(&fds_exc);
+ FD_SET(s->sock_fd, &fds_exc);
+ res = select(s->sock_fd+1, NULL, &fds, &fds_exc, &tv);
+ if (res == 0) {
+ res = WSAEWOULDBLOCK;
+ timeout = 1;
+ } else if (res > 0) {
+ if (FD_ISSET(s->sock_fd, &fds))
+ /* The socket is in the writeable set - this
+ means connected */
+ res = 0;
+ else {
+ /* As per MS docs, we need to call getsockopt()
+ to get the underlying error */
+ int res_size = sizeof res;
+ /* It must be in the exception set */
+ assert(FD_ISSET(s->sock_fd, &fds_exc));
+ if (0 == getsockopt(s->sock_fd, SOL_SOCKET, SO_ERROR,
+ (char *)&res, &res_size))
+ /* getsockopt also clears WSAGetLastError,
+ so reset it back. */
+ WSASetLastError(res);
+ else
+ res = WSAGetLastError();
+ }
+ }
+ /* else if (res < 0) an error occurred */
+ }
+ }
+
+ if (res < 0)
+ res = WSAGetLastError();
+
+#else
+
+ if (s->sock_timeout > 0.0) {
+ if (res < 0 && errno == EINPROGRESS && IS_SELECTABLE(s)) {
+ timeout = internal_select(s, 1);
+ if (timeout == 0) {
+ /* Bug #1019808: in case of an EINPROGRESS,
+ use getsockopt(SO_ERROR) to get the real
+ error. */
+ socklen_t res_size = sizeof res;
+ (void)getsockopt(s->sock_fd, SOL_SOCKET,
+ SO_ERROR, &res, &res_size);
+ if (res == EISCONN)
+ res = 0;
+ errno = res;
+ }
+ else if (timeout == -1) {
+ res = errno; /* had error */
+ }
+ else
+ res = EWOULDBLOCK; /* timed out */
+ }
+ }
+
+ if (res < 0)
+ res = errno;
+
+#endif
+ *timeoutp = timeout;
+
+ return res;
+}
+
+/* s.connect(sockaddr) method */
+
+static PyObject *
+sock_connect(PySocketSockObject *s, PyObject *addro)
+{
+ sock_addr_t addrbuf;
+ int addrlen;
+ int res;
+ int timeout;
+
+ if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
+ return NULL;
+
+ Py_BEGIN_ALLOW_THREADS
+ res = internal_connect(s, SAS2SA(&addrbuf), addrlen, &timeout);
+ Py_END_ALLOW_THREADS
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return NULL;
+ }
+ if (res != 0)
+ return s->errorhandler();
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(connect_doc,
+"connect(address)\n\
+\n\
+Connect the socket to a remote address. For IP sockets, the address\n\
+is a pair (host, port).");
+
+
+/* s.connect_ex(sockaddr) method */
+
+static PyObject *
+sock_connect_ex(PySocketSockObject *s, PyObject *addro)
+{
+ sock_addr_t addrbuf;
+ int addrlen;
+ int res;
+ int timeout;
+
+ if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
+ return NULL;
+
+ Py_BEGIN_ALLOW_THREADS
+ res = internal_connect(s, SAS2SA(&addrbuf), addrlen, &timeout);
+ Py_END_ALLOW_THREADS
+
+ /* Signals are not errors (though they may raise exceptions). Adapted
+ from PyErr_SetFromErrnoWithFilenameObject(). */
+#ifdef EINTR
+ if (res == EINTR && PyErr_CheckSignals())
+ return NULL;
+#endif
+
+ return PyInt_FromLong((long) res);
+}
+
+PyDoc_STRVAR(connect_ex_doc,
+"connect_ex(address) -> errno\n\
+\n\
+This is like connect(address), but returns an error code (the errno value)\n\
+instead of raising an exception when an error occurs.");
+
+
+/* s.fileno() method */
+
+static PyObject *
+sock_fileno(PySocketSockObject *s)
+{
+#if SIZEOF_SOCKET_T <= SIZEOF_LONG
+ return PyInt_FromLong((long) s->sock_fd);
+#else
+ return PyLong_FromLongLong((PY_LONG_LONG)s->sock_fd);
+#endif
+}
+
+PyDoc_STRVAR(fileno_doc,
+"fileno() -> integer\n\
+\n\
+Return the integer file descriptor of the socket.");
+
+
+#ifndef NO_DUP
+/* s.dup() method */
+
+static PyObject *
+sock_dup(PySocketSockObject *s)
+{
+ SOCKET_T newfd;
+ PyObject *sock;
+
+ newfd = dup(s->sock_fd);
+ if (newfd < 0)
+ return s->errorhandler();
+ sock = (PyObject *) new_sockobject(newfd,
+ s->sock_family,
+ s->sock_type,
+ s->sock_proto);
+ if (sock == NULL)
+ SOCKETCLOSE(newfd);
+ return sock;
+}
+
+PyDoc_STRVAR(dup_doc,
+"dup() -> socket object\n\
+\n\
+Return a new socket object connected to the same system resource.");
+
+#endif
+
+
+/* s.getsockname() method */
+
+static PyObject *
+sock_getsockname(PySocketSockObject *s)
+{
+ sock_addr_t addrbuf;
+ int res;
+ socklen_t addrlen;
+
+ if (!getsockaddrlen(s, &addrlen))
+ return NULL;
+ memset(&addrbuf, 0, addrlen);
+ Py_BEGIN_ALLOW_THREADS
+ res = getsockname(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return s->errorhandler();
+ return makesockaddr(s->sock_fd, SAS2SA(&addrbuf), addrlen,
+ s->sock_proto);
+}
+
+PyDoc_STRVAR(getsockname_doc,
+"getsockname() -> address info\n\
+\n\
+Return the address of the local endpoint. For IP sockets, the address\n\
+info is a pair (hostaddr, port).");
+
+
+#ifdef HAVE_GETPEERNAME /* Cray APP doesn't have this :-( */
+/* s.getpeername() method */
+
+static PyObject *
+sock_getpeername(PySocketSockObject *s)
+{
+ sock_addr_t addrbuf;
+ int res;
+ socklen_t addrlen;
+
+ if (!getsockaddrlen(s, &addrlen))
+ return NULL;
+ memset(&addrbuf, 0, addrlen);
+ Py_BEGIN_ALLOW_THREADS
+ res = getpeername(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return s->errorhandler();
+ return makesockaddr(s->sock_fd, SAS2SA(&addrbuf), addrlen,
+ s->sock_proto);
+}
+
+PyDoc_STRVAR(getpeername_doc,
+"getpeername() -> address info\n\
+\n\
+Return the address of the remote endpoint. For IP sockets, the address\n\
+info is a pair (hostaddr, port).");
+
+#endif /* HAVE_GETPEERNAME */
+
+
+/* s.listen(n) method */
+
+static PyObject *
+sock_listen(PySocketSockObject *s, PyObject *arg)
+{
+ int backlog;
+ int res;
+
+ backlog = PyInt_AsLong(arg);
+ if (backlog == -1 && PyErr_Occurred())
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ if (backlog < 1)
+ backlog = 1;
+ res = listen(s->sock_fd, backlog);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return s->errorhandler();
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(listen_doc,
+"listen(backlog)\n\
+\n\
+Enable a server to accept connections. The backlog argument must be at\n\
+least 1; it specifies the number of unaccepted connection that the system\n\
+will allow before refusing new connections.");
+
+
+#ifndef NO_DUP
+/* s.makefile(mode) method.
+ Create a new open file object referring to a dupped version of
+ the socket's file descriptor. (The dup() call is necessary so
+ that the open file and socket objects may be closed independent
+ of each other.)
+ The mode argument specifies 'r' or 'w' passed to fdopen(). */
+
+static PyObject *
+sock_makefile(PySocketSockObject *s, PyObject *args)
+{
+ extern int fclose(FILE *);
+ char *mode = "r";
+ int bufsize = -1;
+#ifdef MS_WIN32
+ Py_intptr_t fd;
+#else
+ int fd;
+#endif
+ FILE *fp;
+ PyObject *f;
+#ifdef __VMS
+ char *mode_r = "r";
+ char *mode_w = "w";
+#endif
+
+ if (!PyArg_ParseTuple(args, "|si:makefile", &mode, &bufsize))
+ return NULL;
+#ifdef __VMS
+ if (strcmp(mode,"rb") == 0) {
+ mode = mode_r;
+ }
+ else {
+ if (strcmp(mode,"wb") == 0) {
+ mode = mode_w;
+ }
+ }
+#endif
+#ifdef MS_WIN32
+ if (((fd = _open_osfhandle(s->sock_fd, _O_BINARY)) < 0) ||
+ ((fd = dup(fd)) < 0) || ((fp = fdopen(fd, mode)) == NULL))
+#else
+ if ((fd = dup(s->sock_fd)) < 0 || (fp = fdopen(fd, mode)) == NULL)
+#endif
+ {
+ if (fd >= 0)
+ SOCKETCLOSE(fd);
+ return s->errorhandler();
+ }
+ f = PyFile_FromFile(fp, "<socket>", mode, fclose);
+ if (f != NULL)
+ PyFile_SetBufSize(f, bufsize);
+ return f;
+}
+
+PyDoc_STRVAR(makefile_doc,
+"makefile([mode[, buffersize]]) -> file object\n\
+\n\
+Return a regular file object corresponding to the socket.\n\
+The mode and buffersize arguments are as for the built-in open() function.");
+
+#endif /* NO_DUP */
+
+/*
+ * This is the guts of the recv() and recv_into() methods, which reads into a
+ * char buffer. If you have any inc/dec ref to do to the objects that contain
+ * the buffer, do it in the caller. This function returns the number of bytes
+ * succesfully read. If there was an error, it returns -1. Note that it is
+ * also possible that we return a number of bytes smaller than the request
+ * bytes.
+ */
+static ssize_t
+sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
+{
+ ssize_t outlen = -1;
+ int timeout;
+#ifdef __VMS
+ int remaining;
+ char *read_buf;
+#endif
+
+ if (!IS_SELECTABLE(s)) {
+ select_error();
+ return -1;
+ }
+
+#ifndef __VMS
+ Py_BEGIN_ALLOW_THREADS
+ timeout = internal_select(s, 0);
+ if (!timeout)
+ outlen = recv(s->sock_fd, cbuf, len, flags);
+ Py_END_ALLOW_THREADS
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return -1;
+ }
+ if (outlen < 0) {
+ /* Note: the call to errorhandler() ALWAYS indirectly returned
+ NULL, so ignore its return value */
+ s->errorhandler();
+ return -1;
+ }
+#else
+ read_buf = cbuf;
+ remaining = len;
+ while (remaining != 0) {
+ unsigned int segment;
+ int nread = -1;
+
+ segment = remaining /SEGMENT_SIZE;
+ if (segment != 0) {
+ segment = SEGMENT_SIZE;
+ }
+ else {
+ segment = remaining;
+ }
+
+ Py_BEGIN_ALLOW_THREADS
+ timeout = internal_select(s, 0);
+ if (!timeout)
+ nread = recv(s->sock_fd, read_buf, segment, flags);
+ Py_END_ALLOW_THREADS
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return -1;
+ }
+ if (nread < 0) {
+ s->errorhandler();
+ return -1;
+ }
+ if (nread != remaining) {
+ read_buf += nread;
+ break;
+ }
+
+ remaining -= segment;
+ read_buf += segment;
+ }
+ outlen = read_buf - cbuf;
+#endif /* !__VMS */
+
+ return outlen;
+}
+
+
+/* s.recv(nbytes [,flags]) method */
+
+static PyObject *
+sock_recv(PySocketSockObject *s, PyObject *args)
+{
+ int recvlen, flags = 0;
+ ssize_t outlen;
+ PyObject *buf;
+
+ if (!PyArg_ParseTuple(args, "i|i:recv", &recvlen, &flags))
+ return NULL;
+
+ if (recvlen < 0) {
+ PyErr_SetString(PyExc_ValueError,
+ "negative buffersize in recv");
+ return NULL;
+ }
+
+ /* Allocate a new string. */
+ buf = PyString_FromStringAndSize((char *) 0, recvlen);
+ if (buf == NULL)
+ return NULL;
+
+ /* Call the guts */
+ outlen = sock_recv_guts(s, PyString_AS_STRING(buf), recvlen, flags);
+ if (outlen < 0) {
+ /* An error occurred, release the string and return an
+ error. */
+ Py_DECREF(buf);
+ return NULL;
+ }
+ if (outlen != recvlen) {
+ /* We did not read as many bytes as we anticipated, resize the
+ string if possible and be succesful. */
+ if (_PyString_Resize(&buf, outlen) < 0)
+ /* Oopsy, not so succesful after all. */
+ return NULL;
+ }
+
+ return buf;
+}
+
+PyDoc_STRVAR(recv_doc,
+"recv(buffersize[, flags]) -> data\n\
+\n\
+Receive up to buffersize bytes from the socket. For the optional flags\n\
+argument, see the Unix manual. When no data is available, block until\n\
+at least one byte is available or until the remote end is closed. When\n\
+the remote end is closed and all data is read, return the empty string.");
+
+
+/* s.recv_into(buffer, [nbytes [,flags]]) method */
+
+static PyObject*
+sock_recv_into(PySocketSockObject *s, PyObject *args, PyObject *kwds)
+{
+ static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
+
+ int recvlen = 0, flags = 0;
+ ssize_t readlen;
+ char *buf;
+ int buflen;
+
+ /* Get the buffer's memory */
+ if (!PyArg_ParseTupleAndKeywords(args, kwds, "w#|ii:recv_into", kwlist,
+ &buf, &buflen, &recvlen, &flags))
+ return NULL;
+ assert(buf != 0 && buflen > 0);
+
+ if (recvlen < 0) {
+ PyErr_SetString(PyExc_ValueError,
+ "negative buffersize in recv_into");
+ return NULL;
+ }
+ if (recvlen == 0) {
+ /* If nbytes was not specified, use the buffer's length */
+ recvlen = buflen;
+ }
+
+ /* Check if the buffer is large enough */
+ if (buflen < recvlen) {
+ PyErr_SetString(PyExc_ValueError,
+ "buffer too small for requested bytes");
+ return NULL;
+ }
+
+ /* Call the guts */
+ readlen = sock_recv_guts(s, buf, recvlen, flags);
+ if (readlen < 0) {
+ /* Return an error. */
+ return NULL;
+ }
+
+ /* Return the number of bytes read. Note that we do not do anything
+ special here in the case that readlen < recvlen. */
+ return PyInt_FromSsize_t(readlen);
+}
+
+PyDoc_STRVAR(recv_into_doc,
+"recv_into(buffer, [nbytes[, flags]]) -> nbytes_read\n\
+\n\
+A version of recv() that stores its data into a buffer rather than creating \n\
+a new string. Receive up to buffersize bytes from the socket. If buffersize \n\
+is not specified (or 0), receive up to the size available in the given buffer.\n\
+\n\
+See recv() for documentation about the flags.");
+
+
+/*
+ * This is the guts of the recvfrom() and recvfrom_into() methods, which reads
+ * into a char buffer. If you have any inc/def ref to do to the objects that
+ * contain the buffer, do it in the caller. This function returns the number
+ * of bytes succesfully read. If there was an error, it returns -1. Note
+ * that it is also possible that we return a number of bytes smaller than the
+ * request bytes.
+ *
+ * 'addr' is a return value for the address object. Note that you must decref
+ * it yourself.
+ */
+static ssize_t
+sock_recvfrom_guts(PySocketSockObject *s, char* cbuf, int len, int flags,
+ PyObject** addr)
+{
+ sock_addr_t addrbuf;
+ int timeout;
+ ssize_t n = -1;
+ socklen_t addrlen;
+
+ *addr = NULL;
+
+ if (!getsockaddrlen(s, &addrlen))
+ return -1;
+
+ if (!IS_SELECTABLE(s)) {
+ select_error();
+ return -1;
+ }
+
+ Py_BEGIN_ALLOW_THREADS
+ memset(&addrbuf, 0, addrlen);
+ timeout = internal_select(s, 0);
+ if (!timeout) {
+#ifndef MS_WINDOWS
+#if defined(PYOS_OS2) && !defined(PYCC_GCC)
+ n = recvfrom(s->sock_fd, cbuf, len, flags,
+ SAS2SA(&addrbuf), &addrlen);
+#else
+ n = recvfrom(s->sock_fd, cbuf, len, flags,
+ (void *) &addrbuf, &addrlen);
+#endif
+#else
+ n = recvfrom(s->sock_fd, cbuf, len, flags,
+ SAS2SA(&addrbuf), &addrlen);
+#endif
+ }
+ Py_END_ALLOW_THREADS
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return -1;
+ }
+ if (n < 0) {
+ s->errorhandler();
+ return -1;
+ }
+
+ if (!(*addr = makesockaddr(s->sock_fd, SAS2SA(&addrbuf),
+ addrlen, s->sock_proto)))
+ return -1;
+
+ return n;
+}
+
+/* s.recvfrom(nbytes [,flags]) method */
+
+static PyObject *
+sock_recvfrom(PySocketSockObject *s, PyObject *args)
+{
+ PyObject *buf = NULL;
+ PyObject *addr = NULL;
+ PyObject *ret = NULL;
+ int recvlen, flags = 0;
+ ssize_t outlen;
+
+ if (!PyArg_ParseTuple(args, "i|i:recvfrom", &recvlen, &flags))
+ return NULL;
+
+ if (recvlen < 0) {
+ PyErr_SetString(PyExc_ValueError,
+ "negative buffersize in recvfrom");
+ return NULL;
+ }
+
+ buf = PyString_FromStringAndSize((char *) 0, recvlen);
+ if (buf == NULL)
+ return NULL;
+
+ outlen = sock_recvfrom_guts(s, PyString_AS_STRING(buf),
+ recvlen, flags, &addr);
+ if (outlen < 0) {
+ goto finally;
+ }
+
+ if (outlen != recvlen) {
+ /* We did not read as many bytes as we anticipated, resize the
+ string if possible and be succesful. */
+ if (_PyString_Resize(&buf, outlen) < 0)
+ /* Oopsy, not so succesful after all. */
+ goto finally;
+ }
+
+ ret = PyTuple_Pack(2, buf, addr);
+
+finally:
+ Py_XDECREF(buf);
+ Py_XDECREF(addr);
+ return ret;
+}
+
+PyDoc_STRVAR(recvfrom_doc,
+"recvfrom(buffersize[, flags]) -> (data, address info)\n\
+\n\
+Like recv(buffersize, flags) but also return the sender's address info.");
+
+
+/* s.recvfrom_into(buffer[, nbytes [,flags]]) method */
+
+static PyObject *
+sock_recvfrom_into(PySocketSockObject *s, PyObject *args, PyObject* kwds)
+{
+ static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
+
+ int recvlen = 0, flags = 0;
+ ssize_t readlen;
+ char *buf;
+ int buflen;
+
+ PyObject *addr = NULL;
+
+ if (!PyArg_ParseTupleAndKeywords(args, kwds, "w#|ii:recvfrom_into",
+ kwlist, &buf, &buflen,
+ &recvlen, &flags))
+ return NULL;
+ assert(buf != 0 && buflen > 0);
+
+ if (recvlen < 0) {
+ PyErr_SetString(PyExc_ValueError,
+ "negative buffersize in recvfrom_into");
+ return NULL;
+ }
+ if (recvlen == 0) {
+ /* If nbytes was not specified, use the buffer's length */
+ recvlen = buflen;
+ }
+
+ readlen = sock_recvfrom_guts(s, buf, recvlen, flags, &addr);
+ if (readlen < 0) {
+ /* Return an error */
+ Py_XDECREF(addr);
+ return NULL;
+ }
+
+ /* Return the number of bytes read and the address. Note that we do
+ not do anything special here in the case that readlen < recvlen. */
+ return Py_BuildValue("lN", readlen, addr);
+}
+
+PyDoc_STRVAR(recvfrom_into_doc,
+"recvfrom_into(buffer[, nbytes[, flags]]) -> (nbytes, address info)\n\
+\n\
+Like recv_into(buffer[, nbytes[, flags]]) but also return the sender's address info.");
+
+
+/* s.send(data [,flags]) method */
+
+static PyObject *
+sock_send(PySocketSockObject *s, PyObject *args)
+{
+ char *buf;
+ int len, n = -1, flags = 0, timeout;
+ Py_buffer pbuf;
+
+ if (!PyArg_ParseTuple(args, "s*|i:send", &pbuf, &flags))
+ return NULL;
+
+ if (!IS_SELECTABLE(s)) {
+ PyBuffer_Release(&pbuf);
+ return select_error();
+ }
+ buf = pbuf.buf;
+ len = pbuf.len;
+
+ Py_BEGIN_ALLOW_THREADS
+ timeout = internal_select(s, 1);
+ if (!timeout)
+#ifdef __VMS
+ n = sendsegmented(s->sock_fd, buf, len, flags);
+#else
+ n = send(s->sock_fd, buf, len, flags);
+#endif
+ Py_END_ALLOW_THREADS
+
+ PyBuffer_Release(&pbuf);
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return NULL;
+ }
+ if (n < 0)
+ return s->errorhandler();
+ return PyInt_FromLong((long)n);
+}
+
+PyDoc_STRVAR(send_doc,
+"send(data[, flags]) -> count\n\
+\n\
+Send a data string to the socket. For the optional flags\n\
+argument, see the Unix manual. Return the number of bytes\n\
+sent; this may be less than len(data) if the network is busy.");
+
+
+/* s.sendall(data [,flags]) method */
+
+static PyObject *
+sock_sendall(PySocketSockObject *s, PyObject *args)
+{
+ char *buf;
+ int len, n = -1, flags = 0, timeout;
+ Py_buffer pbuf;
+
+ if (!PyArg_ParseTuple(args, "s*|i:sendall", &pbuf, &flags))
+ return NULL;
+ buf = pbuf.buf;
+ len = pbuf.len;
+
+ if (!IS_SELECTABLE(s)) {
+ PyBuffer_Release(&pbuf);
+ return select_error();
+ }
+
+ Py_BEGIN_ALLOW_THREADS
+ do {
+ timeout = internal_select(s, 1);
+ n = -1;
+ if (timeout)
+ break;
+#ifdef __VMS
+ n = sendsegmented(s->sock_fd, buf, len, flags);
+#else
+ n = send(s->sock_fd, buf, len, flags);
+#endif
+ if (n < 0)
+ break;
+ buf += n;
+ len -= n;
+ } while (len > 0);
+ Py_END_ALLOW_THREADS
+ PyBuffer_Release(&pbuf);
+
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return NULL;
+ }
+ if (n < 0)
+ return s->errorhandler();
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(sendall_doc,
+"sendall(data[, flags])\n\
+\n\
+Send a data string to the socket. For the optional flags\n\
+argument, see the Unix manual. This calls send() repeatedly\n\
+until all data is sent. If an error occurs, it's impossible\n\
+to tell how much data has been sent.");
+
+
+/* s.sendto(data, [flags,] sockaddr) method */
+
+static PyObject *
+sock_sendto(PySocketSockObject *s, PyObject *args)
+{
+ Py_buffer pbuf;
+ PyObject *addro;
+ char *buf;
+ Py_ssize_t len;
+ sock_addr_t addrbuf;
+ int addrlen, n = -1, flags, timeout;
+
+ flags = 0;
+ if (!PyArg_ParseTuple(args, "s*O:sendto", &pbuf, &addro)) {
+ PyErr_Clear();
+ if (!PyArg_ParseTuple(args, "s*iO:sendto",
+ &pbuf, &flags, &addro))
+ return NULL;
+ }
+ buf = pbuf.buf;
+ len = pbuf.len;
+
+ if (!IS_SELECTABLE(s)) {
+ PyBuffer_Release(&pbuf);
+ return select_error();
+ }
+
+ if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen)) {
+ PyBuffer_Release(&pbuf);
+ return NULL;
+ }
+
+ Py_BEGIN_ALLOW_THREADS
+ timeout = internal_select(s, 1);
+ if (!timeout)
+ n = sendto(s->sock_fd, buf, len, flags, SAS2SA(&addrbuf), addrlen);
+ Py_END_ALLOW_THREADS
+
+ PyBuffer_Release(&pbuf);
+ if (timeout == 1) {
+ PyErr_SetString(socket_timeout, "timed out");
+ return NULL;
+ }
+ if (n < 0)
+ return s->errorhandler();
+ return PyInt_FromLong((long)n);
+}
+
+PyDoc_STRVAR(sendto_doc,
+"sendto(data[, flags], address) -> count\n\
+\n\
+Like send(data, flags) but allows specifying the destination address.\n\
+For IP sockets, the address is a pair (hostaddr, port).");
+
+
+/* s.shutdown(how) method */
+
+static PyObject *
+sock_shutdown(PySocketSockObject *s, PyObject *arg)
+{
+ int how;
+ int res;
+
+ how = PyInt_AsLong(arg);
+ if (how == -1 && PyErr_Occurred())
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ res = shutdown(s->sock_fd, how);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return s->errorhandler();
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(shutdown_doc,
+"shutdown(flag)\n\
+\n\
+Shut down the reading side of the socket (flag == SHUT_RD), the writing side\n\
+of the socket (flag == SHUT_WR), or both ends (flag == SHUT_RDWR).");
+
+#if defined(MS_WINDOWS) && defined(SIO_RCVALL)
+static PyObject*
+sock_ioctl(PySocketSockObject *s, PyObject *arg)
+{
+ unsigned long cmd = SIO_RCVALL;
+ unsigned int option = RCVALL_ON;
+ DWORD recv;
+
+ if (!PyArg_ParseTuple(arg, "kI:ioctl", &cmd, &option))
+ return NULL;
+
+ if (WSAIoctl(s->sock_fd, cmd, &option, sizeof(option),
+ NULL, 0, &recv, NULL, NULL) == SOCKET_ERROR) {
+ return set_error();
+ }
+ return PyLong_FromUnsignedLong(recv);
+}
+PyDoc_STRVAR(sock_ioctl_doc,
+"ioctl(cmd, option) -> long\n\
+\n\
+Control the socket with WSAIoctl syscall. Currently only socket.SIO_RCVALL\n\
+is supported as control. Options must be one of the socket.RCVALL_*\n\
+constants.");
+
+#endif
+
+/* List of methods for socket objects */
+
+static PyMethodDef sock_methods[] = {
+ {"accept", (PyCFunction)sock_accept, METH_NOARGS,
+ accept_doc},
+ {"bind", (PyCFunction)sock_bind, METH_O,
+ bind_doc},
+ {"close", (PyCFunction)sock_close, METH_NOARGS,
+ close_doc},
+ {"connect", (PyCFunction)sock_connect, METH_O,
+ connect_doc},
+ {"connect_ex", (PyCFunction)sock_connect_ex, METH_O,
+ connect_ex_doc},
+#ifndef NO_DUP
+ {"dup", (PyCFunction)sock_dup, METH_NOARGS,
+ dup_doc},
+#endif
+ {"fileno", (PyCFunction)sock_fileno, METH_NOARGS,
+ fileno_doc},
+#ifdef HAVE_GETPEERNAME
+ {"getpeername", (PyCFunction)sock_getpeername,
+ METH_NOARGS, getpeername_doc},
+#endif
+ {"getsockname", (PyCFunction)sock_getsockname,
+ METH_NOARGS, getsockname_doc},
+ {"getsockopt", (PyCFunction)sock_getsockopt, METH_VARARGS,
+ getsockopt_doc},
+#if defined(MS_WINDOWS) && defined(SIO_RCVALL)
+ {"ioctl", (PyCFunction)sock_ioctl, METH_VARARGS,
+ sock_ioctl_doc},
+#endif
+ {"listen", (PyCFunction)sock_listen, METH_O,
+ listen_doc},
+#ifndef NO_DUP
+ {"makefile", (PyCFunction)sock_makefile, METH_VARARGS,
+ makefile_doc},
+#endif
+ {"recv", (PyCFunction)sock_recv, METH_VARARGS,
+ recv_doc},
+ {"recv_into", (PyCFunction)sock_recv_into, METH_VARARGS | METH_KEYWORDS,
+ recv_into_doc},
+ {"recvfrom", (PyCFunction)sock_recvfrom, METH_VARARGS,
+ recvfrom_doc},
+ {"recvfrom_into", (PyCFunction)sock_recvfrom_into, METH_VARARGS | METH_KEYWORDS,
+ recvfrom_into_doc},
+ {"send", (PyCFunction)sock_send, METH_VARARGS,
+ send_doc},
+ {"sendall", (PyCFunction)sock_sendall, METH_VARARGS,
+ sendall_doc},
+ {"sendto", (PyCFunction)sock_sendto, METH_VARARGS,
+ sendto_doc},
+ {"setblocking", (PyCFunction)sock_setblocking, METH_O,
+ setblocking_doc},
+ {"settimeout", (PyCFunction)sock_settimeout, METH_O,
+ settimeout_doc},
+ {"gettimeout", (PyCFunction)sock_gettimeout, METH_NOARGS,
+ gettimeout_doc},
+ {"setsockopt", (PyCFunction)sock_setsockopt, METH_VARARGS,
+ setsockopt_doc},
+ {"shutdown", (PyCFunction)sock_shutdown, METH_O,
+ shutdown_doc},
+#ifdef RISCOS
+ {"sleeptaskw", (PyCFunction)sock_sleeptaskw, METH_O,
+ sleeptaskw_doc},
+#endif
+ {NULL, NULL} /* sentinel */
+};
+
+/* SockObject members */
+static PyMemberDef sock_memberlist[] = {
+ {"family", T_INT, offsetof(PySocketSockObject, sock_family), READONLY, "the socket family"},
+ {"type", T_INT, offsetof(PySocketSockObject, sock_type), READONLY, "the socket type"},
+ {"proto", T_INT, offsetof(PySocketSockObject, sock_proto), READONLY, "the socket protocol"},
+ {"timeout", T_DOUBLE, offsetof(PySocketSockObject, sock_timeout), READONLY, "the socket timeout"},
+ {0},
+};
+
+/* Deallocate a socket object in response to the last Py_DECREF().
+ First close the file description. */
+
+static void
+sock_dealloc(PySocketSockObject *s)
+{
+ if (s->sock_fd != -1)
+ (void) SOCKETCLOSE(s->sock_fd);
+ Py_TYPE(s)->tp_free((PyObject *)s);
+}
+
+
+static PyObject *
+sock_repr(PySocketSockObject *s)
+{
+ char buf[512];
+#if SIZEOF_SOCKET_T > SIZEOF_LONG
+ if (s->sock_fd > LONG_MAX) {
+ /* this can occur on Win64, and actually there is a special
+ ugly printf formatter for decimal pointer length integer
+ printing, only bother if necessary*/
+ PyErr_SetString(PyExc_OverflowError,
+ "no printf formatter to display "
+ "the socket descriptor in decimal");
+ return NULL;
+ }
+#endif
+ PyOS_snprintf(
+ buf, sizeof(buf),
+ "<socket object, fd=%ld, family=%d, type=%d, protocol=%d>",
+ (long)s->sock_fd, s->sock_family,
+ s->sock_type,
+ s->sock_proto);
+ return PyString_FromString(buf);
+}
+
+
+/* Create a new, uninitialized socket object. */
+
+static PyObject *
+sock_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
+{
+ PyObject *new;
+
+ new = type->tp_alloc(type, 0);
+ if (new != NULL) {
+ ((PySocketSockObject *)new)->sock_fd = -1;
+ ((PySocketSockObject *)new)->sock_timeout = -1.0;
+ ((PySocketSockObject *)new)->errorhandler = &set_error;
+ }
+ return new;
+}
+
+
+/* Initialize a new socket object. */
+
+/*ARGSUSED*/
+static int
+sock_initobj(PyObject *self, PyObject *args, PyObject *kwds)
+{
+ PySocketSockObject *s = (PySocketSockObject *)self;
+ SOCKET_T fd;
+ int family = AF_INET, type = SOCK_STREAM, proto = 0;
+ static char *keywords[] = {"family", "type", "proto", 0};
+
+ if (!PyArg_ParseTupleAndKeywords(args, kwds,
+ "|iii:socket", keywords,
+ &family, &type, &proto))
+ return -1;
+
+ Py_BEGIN_ALLOW_THREADS
+ fd = socket(family, type, proto);
+ Py_END_ALLOW_THREADS
+
+#ifdef MS_WINDOWS
+ if (fd == INVALID_SOCKET)
+#else
+ if (fd < 0)
+#endif
+ {
+ set_error();
+ return -1;
+ }
+ init_sockobject(s, fd, family, type, proto);
+
+ return 0;
+
+}
+
+
+/* Type object for socket objects. */
+
+static PyTypeObject sock_type = {
+ PyVarObject_HEAD_INIT(0, 0) /* Must fill in type value later */
+ "_socket.socket", /* tp_name */
+ sizeof(PySocketSockObject), /* tp_basicsize */
+ 0, /* tp_itemsize */
+ (destructor)sock_dealloc, /* tp_dealloc */
+ 0, /* tp_print */
+ 0, /* tp_getattr */
+ 0, /* tp_setattr */
+ 0, /* tp_compare */
+ (reprfunc)sock_repr, /* tp_repr */
+ 0, /* tp_as_number */
+ 0, /* tp_as_sequence */
+ 0, /* tp_as_mapping */
+ 0, /* tp_hash */
+ 0, /* tp_call */
+ 0, /* tp_str */
+ PyObject_GenericGetAttr, /* tp_getattro */
+ 0, /* tp_setattro */
+ 0, /* tp_as_buffer */
+ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */
+ sock_doc, /* tp_doc */
+ 0, /* tp_traverse */
+ 0, /* tp_clear */
+ 0, /* tp_richcompare */
+ 0, /* tp_weaklistoffset */
+ 0, /* tp_iter */
+ 0, /* tp_iternext */
+ sock_methods, /* tp_methods */
+ sock_memberlist, /* tp_members */
+ 0, /* tp_getset */
+ 0, /* tp_base */
+ 0, /* tp_dict */
+ 0, /* tp_descr_get */
+ 0, /* tp_descr_set */
+ 0, /* tp_dictoffset */
+ sock_initobj, /* tp_init */
+ PyType_GenericAlloc, /* tp_alloc */
+ sock_new, /* tp_new */
+ PyObject_Del, /* tp_free */
+};
+
+
+/* Python interface to gethostname(). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_gethostname(PyObject *self, PyObject *unused)
+{
+ char buf[1024];
+ int res;
+ Py_BEGIN_ALLOW_THREADS
+ res = gethostname(buf, (int) sizeof buf - 1);
+ Py_END_ALLOW_THREADS
+ if (res < 0)
+ return set_error();
+ buf[sizeof buf - 1] = '\0';
+ return PyString_FromString(buf);
+}
+
+PyDoc_STRVAR(gethostname_doc,
+"gethostname() -> string\n\
+\n\
+Return the current host name.");
+
+
+/* Python interface to gethostbyname(name). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_gethostbyname(PyObject *self, PyObject *args)
+{
+ char *name;
+ sock_addr_t addrbuf;
+
+ if (!PyArg_ParseTuple(args, "s:gethostbyname", &name))
+ return NULL;
+ if (setipaddr(name, SAS2SA(&addrbuf), sizeof(addrbuf), AF_INET) < 0)
+ return NULL;
+ return makeipaddr(SAS2SA(&addrbuf), sizeof(struct sockaddr_in));
+}
+
+PyDoc_STRVAR(gethostbyname_doc,
+"gethostbyname(host) -> address\n\
+\n\
+Return the IP address (a string of the form '255.255.255.255') for a host.");
+
+
+/* Convenience function common to gethostbyname_ex and gethostbyaddr */
+
+static PyObject *
+gethost_common(struct hostent *h, struct sockaddr *addr, int alen, int af)
+{
+ char **pch;
+ PyObject *rtn_tuple = (PyObject *)NULL;
+ PyObject *name_list = (PyObject *)NULL;
+ PyObject *addr_list = (PyObject *)NULL;
+ PyObject *tmp;
+
+ if (h == NULL) {
+ /* Let's get real error message to return */
+#ifndef RISCOS
+ set_herror(h_errno);
+#else
+ PyErr_SetString(socket_error, "host not found");
+#endif
+ return NULL;
+ }
+
+ if (h->h_addrtype != af) {
+ /* Let's get real error message to return */
+ PyErr_SetString(socket_error,
+ (char *)strerror(EAFNOSUPPORT));
+
+ return NULL;
+ }
+
+ switch (af) {
+
+ case AF_INET:
+ if (alen < sizeof(struct sockaddr_in))
+ return NULL;
+ break;
+
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ if (alen < sizeof(struct sockaddr_in6))
+ return NULL;
+ break;
+#endif
+
+ }
+
+ if ((name_list = PyList_New(0)) == NULL)
+ goto err;
+
+ if ((addr_list = PyList_New(0)) == NULL)
+ goto err;
+
+ /* SF #1511317: h_aliases can be NULL */
+ if (h->h_aliases) {
+ for (pch = h->h_aliases; *pch != NULL; pch++) {
+ int status;
+ tmp = PyString_FromString(*pch);
+ if (tmp == NULL)
+ goto err;
+
+ status = PyList_Append(name_list, tmp);
+ Py_DECREF(tmp);
+
+ if (status)
+ goto err;
+ }
+ }
+
+ for (pch = h->h_addr_list; *pch != NULL; pch++) {
+ int status;
+
+ switch (af) {
+
+ case AF_INET:
+ {
+ struct sockaddr_in sin;
+ memset(&sin, 0, sizeof(sin));
+ sin.sin_family = af;
+#ifdef HAVE_SOCKADDR_SA_LEN
+ sin.sin_len = sizeof(sin);
+#endif
+ memcpy(&sin.sin_addr, *pch, sizeof(sin.sin_addr));
+ tmp = makeipaddr((struct sockaddr *)&sin, sizeof(sin));
+
+ if (pch == h->h_addr_list && alen >= sizeof(sin))
+ memcpy((char *) addr, &sin, sizeof(sin));
+ break;
+ }
+
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ {
+ struct sockaddr_in6 sin6;
+ memset(&sin6, 0, sizeof(sin6));
+ sin6.sin6_family = af;
+#ifdef HAVE_SOCKADDR_SA_LEN
+ sin6.sin6_len = sizeof(sin6);
+#endif
+ memcpy(&sin6.sin6_addr, *pch, sizeof(sin6.sin6_addr));
+ tmp = makeipaddr((struct sockaddr *)&sin6,
+ sizeof(sin6));
+
+ if (pch == h->h_addr_list && alen >= sizeof(sin6))
+ memcpy((char *) addr, &sin6, sizeof(sin6));
+ break;
+ }
+#endif
+
+ default: /* can't happen */
+ PyErr_SetString(socket_error,
+ "unsupported address family");
+ return NULL;
+ }
+
+ if (tmp == NULL)
+ goto err;
+
+ status = PyList_Append(addr_list, tmp);
+ Py_DECREF(tmp);
+
+ if (status)
+ goto err;
+ }
+
+ rtn_tuple = Py_BuildValue("sOO", h->h_name, name_list, addr_list);
+
+ err:
+ Py_XDECREF(name_list);
+ Py_XDECREF(addr_list);
+ return rtn_tuple;
+}
+
+
+/* Python interface to gethostbyname_ex(name). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_gethostbyname_ex(PyObject *self, PyObject *args)
+{
+ char *name;
+ struct hostent *h;
+#ifdef ENABLE_IPV6
+ struct sockaddr_storage addr;
+#else
+ struct sockaddr_in addr;
+#endif
+ struct sockaddr *sa;
+ PyObject *ret;
+#ifdef HAVE_GETHOSTBYNAME_R
+ struct hostent hp_allocated;
+#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
+ struct hostent_data data;
+#else
+ char buf[16384];
+ int buf_len = (sizeof buf) - 1;
+ int errnop;
+#endif
+#if defined(HAVE_GETHOSTBYNAME_R_3_ARG) || defined(HAVE_GETHOSTBYNAME_R_6_ARG)
+ int result;
+#endif
+#endif /* HAVE_GETHOSTBYNAME_R */
+
+ if (!PyArg_ParseTuple(args, "s:gethostbyname_ex", &name))
+ return NULL;
+ if (setipaddr(name, (struct sockaddr *)&addr, sizeof(addr), AF_INET) < 0)
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+#ifdef HAVE_GETHOSTBYNAME_R
+#if defined(HAVE_GETHOSTBYNAME_R_6_ARG)
+ result = gethostbyname_r(name, &hp_allocated, buf, buf_len,
+ &h, &errnop);
+#elif defined(HAVE_GETHOSTBYNAME_R_5_ARG)
+ h = gethostbyname_r(name, &hp_allocated, buf, buf_len, &errnop);
+#else /* HAVE_GETHOSTBYNAME_R_3_ARG */
+ memset((void *) &data, '\0', sizeof(data));
+ result = gethostbyname_r(name, &hp_allocated, &data);
+ h = (result != 0) ? NULL : &hp_allocated;
+#endif
+#else /* not HAVE_GETHOSTBYNAME_R */
+#ifdef USE_GETHOSTBYNAME_LOCK
+ PyThread_acquire_lock(netdb_lock, 1);
+#endif
+ h = gethostbyname(name);
+#endif /* HAVE_GETHOSTBYNAME_R */
+ Py_END_ALLOW_THREADS
+ /* Some C libraries would require addr.__ss_family instead of
+ addr.ss_family.
+ Therefore, we cast the sockaddr_storage into sockaddr to
+ access sa_family. */
+ sa = (struct sockaddr*)&addr;
+ ret = gethost_common(h, (struct sockaddr *)&addr, sizeof(addr),
+ sa->sa_family);
+#ifdef USE_GETHOSTBYNAME_LOCK
+ PyThread_release_lock(netdb_lock);
+#endif
+ return ret;
+}
+
+PyDoc_STRVAR(ghbn_ex_doc,
+"gethostbyname_ex(host) -> (name, aliaslist, addresslist)\n\
+\n\
+Return the true host name, a list of aliases, and a list of IP addresses,\n\
+for a host. The host argument is a string giving a host name or IP number.");
+
+
+/* Python interface to gethostbyaddr(IP). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_gethostbyaddr(PyObject *self, PyObject *args)
+{
+#ifdef ENABLE_IPV6
+ struct sockaddr_storage addr;
+#else
+ struct sockaddr_in addr;
+#endif
+ struct sockaddr *sa = (struct sockaddr *)&addr;
+ char *ip_num;
+ struct hostent *h;
+ PyObject *ret;
+#ifdef HAVE_GETHOSTBYNAME_R
+ struct hostent hp_allocated;
+#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
+ struct hostent_data data;
+#else
+ char buf[16384];
+ int buf_len = (sizeof buf) - 1;
+ int errnop;
+#endif
+#if defined(HAVE_GETHOSTBYNAME_R_3_ARG) || defined(HAVE_GETHOSTBYNAME_R_6_ARG)
+ int result;
+#endif
+#endif /* HAVE_GETHOSTBYNAME_R */
+ char *ap;
+ int al;
+ int af;
+
+ if (!PyArg_ParseTuple(args, "s:gethostbyaddr", &ip_num))
+ return NULL;
+ af = AF_UNSPEC;
+ if (setipaddr(ip_num, sa, sizeof(addr), af) < 0)
+ return NULL;
+ af = sa->sa_family;
+ ap = NULL;
+ al = 0;
+ switch (af) {
+ case AF_INET:
+ ap = (char *)&((struct sockaddr_in *)sa)->sin_addr;
+ al = sizeof(((struct sockaddr_in *)sa)->sin_addr);
+ break;
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ ap = (char *)&((struct sockaddr_in6 *)sa)->sin6_addr;
+ al = sizeof(((struct sockaddr_in6 *)sa)->sin6_addr);
+ break;
+#endif
+ default:
+ PyErr_SetString(socket_error, "unsupported address family");
+ return NULL;
+ }
+ Py_BEGIN_ALLOW_THREADS
+#ifdef HAVE_GETHOSTBYNAME_R
+#if defined(HAVE_GETHOSTBYNAME_R_6_ARG)
+ result = gethostbyaddr_r(ap, al, af,
+ &hp_allocated, buf, buf_len,
+ &h, &errnop);
+#elif defined(HAVE_GETHOSTBYNAME_R_5_ARG)
+ h = gethostbyaddr_r(ap, al, af,
+ &hp_allocated, buf, buf_len, &errnop);
+#else /* HAVE_GETHOSTBYNAME_R_3_ARG */
+ memset((void *) &data, '\0', sizeof(data));
+ result = gethostbyaddr_r(ap, al, af, &hp_allocated, &data);
+ h = (result != 0) ? NULL : &hp_allocated;
+#endif
+#else /* not HAVE_GETHOSTBYNAME_R */
+#ifdef USE_GETHOSTBYNAME_LOCK
+ PyThread_acquire_lock(netdb_lock, 1);
+#endif
+ h = gethostbyaddr(ap, al, af);
+#endif /* HAVE_GETHOSTBYNAME_R */
+ Py_END_ALLOW_THREADS
+ ret = gethost_common(h, (struct sockaddr *)&addr, sizeof(addr), af);
+#ifdef USE_GETHOSTBYNAME_LOCK
+ PyThread_release_lock(netdb_lock);
+#endif
+ return ret;
+}
+
+PyDoc_STRVAR(gethostbyaddr_doc,
+"gethostbyaddr(host) -> (name, aliaslist, addresslist)\n\
+\n\
+Return the true host name, a list of aliases, and a list of IP addresses,\n\
+for a host. The host argument is a string giving a host name or IP number.");
+
+
+/* Python interface to getservbyname(name).
+ This only returns the port number, since the other info is already
+ known or not useful (like the list of aliases). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_getservbyname(PyObject *self, PyObject *args)
+{
+ char *name, *proto=NULL;
+ struct servent *sp;
+ if (!PyArg_ParseTuple(args, "s|s:getservbyname", &name, &proto))
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ sp = getservbyname(name, proto);
+ Py_END_ALLOW_THREADS
+ if (sp == NULL) {
+ PyErr_SetString(socket_error, "service/proto not found");
+ return NULL;
+ }
+ return PyInt_FromLong((long) ntohs(sp->s_port));
+}
+
+PyDoc_STRVAR(getservbyname_doc,
+"getservbyname(servicename[, protocolname]) -> integer\n\
+\n\
+Return a port number from a service name and protocol name.\n\
+The optional protocol name, if given, should be 'tcp' or 'udp',\n\
+otherwise any protocol will match.");
+
+
+/* Python interface to getservbyport(port).
+ This only returns the service name, since the other info is already
+ known or not useful (like the list of aliases). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_getservbyport(PyObject *self, PyObject *args)
+{
+ unsigned short port;
+ char *proto=NULL;
+ struct servent *sp;
+ if (!PyArg_ParseTuple(args, "H|s:getservbyport", &port, &proto))
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ sp = getservbyport(htons(port), proto);
+ Py_END_ALLOW_THREADS
+ if (sp == NULL) {
+ PyErr_SetString(socket_error, "port/proto not found");
+ return NULL;
+ }
+ return PyString_FromString(sp->s_name);
+}
+
+PyDoc_STRVAR(getservbyport_doc,
+"getservbyport(port[, protocolname]) -> string\n\
+\n\
+Return the service name from a port number and protocol name.\n\
+The optional protocol name, if given, should be 'tcp' or 'udp',\n\
+otherwise any protocol will match.");
+
+/* Python interface to getprotobyname(name).
+ This only returns the protocol number, since the other info is
+ already known or not useful (like the list of aliases). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_getprotobyname(PyObject *self, PyObject *args)
+{
+ char *name;
+ struct protoent *sp;
+#ifdef __BEOS__
+/* Not available in BeOS yet. - [cjh] */
+ PyErr_SetString(socket_error, "getprotobyname not supported");
+ return NULL;
+#else
+ if (!PyArg_ParseTuple(args, "s:getprotobyname", &name))
+ return NULL;
+ Py_BEGIN_ALLOW_THREADS
+ sp = getprotobyname(name);
+ Py_END_ALLOW_THREADS
+ if (sp == NULL) {
+ PyErr_SetString(socket_error, "protocol not found");
+ return NULL;
+ }
+ return PyInt_FromLong((long) sp->p_proto);
+#endif
+}
+
+PyDoc_STRVAR(getprotobyname_doc,
+"getprotobyname(name) -> integer\n\
+\n\
+Return the protocol number for the named protocol. (Rarely used.)");
+
+
+#ifdef HAVE_SOCKETPAIR
+/* Create a pair of sockets using the socketpair() function.
+ Arguments as for socket() except the default family is AF_UNIX if
+ defined on the platform; otherwise, the default is AF_INET. */
+
+/*ARGSUSED*/
+static PyObject *
+socket_socketpair(PyObject *self, PyObject *args)
+{
+ PySocketSockObject *s0 = NULL, *s1 = NULL;
+ SOCKET_T sv[2];
+ int family, type = SOCK_STREAM, proto = 0;
+ PyObject *res = NULL;
+
+#if defined(AF_UNIX)
+ family = AF_UNIX;
+#else
+ family = AF_INET;
+#endif
+ if (!PyArg_ParseTuple(args, "|iii:socketpair",
+ &family, &type, &proto))
+ return NULL;
+ /* Create a pair of socket fds */
+ if (socketpair(family, type, proto, sv) < 0)
+ return set_error();
+ s0 = new_sockobject(sv[0], family, type, proto);
+ if (s0 == NULL)
+ goto finally;
+ s1 = new_sockobject(sv[1], family, type, proto);
+ if (s1 == NULL)
+ goto finally;
+ res = PyTuple_Pack(2, s0, s1);
+
+finally:
+ if (res == NULL) {
+ if (s0 == NULL)
+ SOCKETCLOSE(sv[0]);
+ if (s1 == NULL)
+ SOCKETCLOSE(sv[1]);
+ }
+ Py_XDECREF(s0);
+ Py_XDECREF(s1);
+ return res;
+}
+
+PyDoc_STRVAR(socketpair_doc,
+"socketpair([family[, type[, proto]]]) -> (socket object, socket object)\n\
+\n\
+Create a pair of socket objects from the sockets returned by the platform\n\
+socketpair() function.\n\
+The arguments are the same as for socket() except the default family is\n\
+AF_UNIX if defined on the platform; otherwise, the default is AF_INET.");
+
+#endif /* HAVE_SOCKETPAIR */
+
+
+#ifndef NO_DUP
+/* Create a socket object from a numeric file description.
+ Useful e.g. if stdin is a socket.
+ Additional arguments as for socket(). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_fromfd(PyObject *self, PyObject *args)
+{
+ PySocketSockObject *s;
+ SOCKET_T fd;
+ int family, type, proto = 0;
+ if (!PyArg_ParseTuple(args, "iii|i:fromfd",
+ &fd, &family, &type, &proto))
+ return NULL;
+ /* Dup the fd so it and the socket can be closed independently */
+ fd = dup(fd);
+ if (fd < 0)
+ return set_error();
+ s = new_sockobject(fd, family, type, proto);
+ return (PyObject *) s;
+}
+
+PyDoc_STRVAR(fromfd_doc,
+"fromfd(fd, family, type[, proto]) -> socket object\n\
+\n\
+Create a socket object from a duplicate of the given\n\
+file descriptor.\n\
+The remaining arguments are the same as for socket().");
+
+#endif /* NO_DUP */
+
+
+static PyObject *
+socket_ntohs(PyObject *self, PyObject *args)
+{
+ int x1, x2;
+
+ if (!PyArg_ParseTuple(args, "i:ntohs", &x1)) {
+ return NULL;
+ }
+ if (x1 < 0) {
+ PyErr_SetString(PyExc_OverflowError,
+ "can't convert negative number to unsigned long");
+ return NULL;
+ }
+ x2 = (unsigned int)ntohs((unsigned short)x1);
+ return PyInt_FromLong(x2);
+}
+
+PyDoc_STRVAR(ntohs_doc,
+"ntohs(integer) -> integer\n\
+\n\
+Convert a 16-bit integer from network to host byte order.");
+
+
+static PyObject *
+socket_ntohl(PyObject *self, PyObject *arg)
+{
+ unsigned long x;
+
+ if (PyInt_Check(arg)) {
+ x = PyInt_AS_LONG(arg);
+ if (x == (unsigned long) -1 && PyErr_Occurred())
+ return NULL;
+ if ((long)x < 0) {
+ PyErr_SetString(PyExc_OverflowError,
+ "can't convert negative number to unsigned long");
+ return NULL;
+ }
+ }
+ else if (PyLong_Check(arg)) {
+ x = PyLong_AsUnsignedLong(arg);
+ if (x == (unsigned long) -1 && PyErr_Occurred())
+ return NULL;
+#if SIZEOF_LONG > 4
+ {
+ unsigned long y;
+ /* only want the trailing 32 bits */
+ y = x & 0xFFFFFFFFUL;
+ if (y ^ x)
+ return PyErr_Format(PyExc_OverflowError,
+ "long int larger than 32 bits");
+ x = y;
+ }
+#endif
+ }
+ else
+ return PyErr_Format(PyExc_TypeError,
+ "expected int/long, %s found",
+ Py_TYPE(arg)->tp_name);
+ if (x == (unsigned long) -1 && PyErr_Occurred())
+ return NULL;
+ return PyLong_FromUnsignedLong(ntohl(x));
+}
+
+PyDoc_STRVAR(ntohl_doc,
+"ntohl(integer) -> integer\n\
+\n\
+Convert a 32-bit integer from network to host byte order.");
+
+
+static PyObject *
+socket_htons(PyObject *self, PyObject *args)
+{
+ int x1, x2;
+
+ if (!PyArg_ParseTuple(args, "i:htons", &x1)) {
+ return NULL;
+ }
+ if (x1 < 0) {
+ PyErr_SetString(PyExc_OverflowError,
+ "can't convert negative number to unsigned long");
+ return NULL;
+ }
+ x2 = (unsigned int)htons((unsigned short)x1);
+ return PyInt_FromLong(x2);
+}
+
+PyDoc_STRVAR(htons_doc,
+"htons(integer) -> integer\n\
+\n\
+Convert a 16-bit integer from host to network byte order.");
+
+
+static PyObject *
+socket_htonl(PyObject *self, PyObject *arg)
+{
+ unsigned long x;
+
+ if (PyInt_Check(arg)) {
+ x = PyInt_AS_LONG(arg);
+ if (x == (unsigned long) -1 && PyErr_Occurred())
+ return NULL;
+ if ((long)x < 0) {
+ PyErr_SetString(PyExc_OverflowError,
+ "can't convert negative number to unsigned long");
+ return NULL;
+ }
+ }
+ else if (PyLong_Check(arg)) {
+ x = PyLong_AsUnsignedLong(arg);
+ if (x == (unsigned long) -1 && PyErr_Occurred())
+ return NULL;
+#if SIZEOF_LONG > 4
+ {
+ unsigned long y;
+ /* only want the trailing 32 bits */
+ y = x & 0xFFFFFFFFUL;
+ if (y ^ x)
+ return PyErr_Format(PyExc_OverflowError,
+ "long int larger than 32 bits");
+ x = y;
+ }
+#endif
+ }
+ else
+ return PyErr_Format(PyExc_TypeError,
+ "expected int/long, %s found",
+ Py_TYPE(arg)->tp_name);
+ return PyLong_FromUnsignedLong(htonl((unsigned long)x));
+}
+
+PyDoc_STRVAR(htonl_doc,
+"htonl(integer) -> integer\n\
+\n\
+Convert a 32-bit integer from host to network byte order.");
+
+/* socket.inet_aton() and socket.inet_ntoa() functions. */
+
+PyDoc_STRVAR(inet_aton_doc,
+"inet_aton(string) -> packed 32-bit IP representation\n\
+\n\
+Convert an IP address in string format (123.45.67.89) to the 32-bit packed\n\
+binary format used in low-level network functions.");
+
+static PyObject*
+socket_inet_aton(PyObject *self, PyObject *args)
+{
+#ifndef INADDR_NONE
+#define INADDR_NONE (-1)
+#endif
+#ifdef HAVE_INET_ATON
+ struct in_addr buf;
+#endif
+
+#if !defined(HAVE_INET_ATON) || defined(USE_INET_ATON_WEAKLINK)
+ /* Have to use inet_addr() instead */
+ unsigned long packed_addr;
+#endif
+ char *ip_addr;
+
+ if (!PyArg_ParseTuple(args, "s:inet_aton", &ip_addr))
+ return NULL;
+
+
+#ifdef HAVE_INET_ATON
+
+#ifdef USE_INET_ATON_WEAKLINK
+ if (inet_aton != NULL) {
+#endif
+ if (inet_aton(ip_addr, &buf))
+ return PyString_FromStringAndSize((char *)(&buf),
+ sizeof(buf));
+
+ PyErr_SetString(socket_error,
+ "illegal IP address string passed to inet_aton");
+ return NULL;
+
+#ifdef USE_INET_ATON_WEAKLINK
+ } else {
+#endif
+
+#endif
+
+#if !defined(HAVE_INET_ATON) || defined(USE_INET_ATON_WEAKLINK)
+
+ /* special-case this address as inet_addr might return INADDR_NONE
+ * for this */
+ if (strcmp(ip_addr, "255.255.255.255") == 0) {
+ packed_addr = 0xFFFFFFFF;
+ } else {
+
+ packed_addr = inet_addr(ip_addr);
+
+ if (packed_addr == INADDR_NONE) { /* invalid address */
+ PyErr_SetString(socket_error,
+ "illegal IP address string passed to inet_aton");
+ return NULL;
+ }
+ }
+ return PyString_FromStringAndSize((char *) &packed_addr,
+ sizeof(packed_addr));
+
+#ifdef USE_INET_ATON_WEAKLINK
+ }
+#endif
+
+#endif
+}
+
+PyDoc_STRVAR(inet_ntoa_doc,
+"inet_ntoa(packed_ip) -> ip_address_string\n\
+\n\
+Convert an IP address from 32-bit packed binary format to string format");
+
+static PyObject*
+socket_inet_ntoa(PyObject *self, PyObject *args)
+{
+ char *packed_str;
+ int addr_len;
+ struct in_addr packed_addr;
+
+ if (!PyArg_ParseTuple(args, "s#:inet_ntoa", &packed_str, &addr_len)) {
+ return NULL;
+ }
+
+ if (addr_len != sizeof(packed_addr)) {
+ PyErr_SetString(socket_error,
+ "packed IP wrong length for inet_ntoa");
+ return NULL;
+ }
+
+ memcpy(&packed_addr, packed_str, addr_len);
+
+ return PyString_FromString(inet_ntoa(packed_addr));
+}
+
+#ifdef HAVE_INET_PTON
+
+PyDoc_STRVAR(inet_pton_doc,
+"inet_pton(af, ip) -> packed IP address string\n\
+\n\
+Convert an IP address from string format to a packed string suitable\n\
+for use with low-level network functions.");
+
+static PyObject *
+socket_inet_pton(PyObject *self, PyObject *args)
+{
+ int af;
+ char* ip;
+ int retval;
+#ifdef ENABLE_IPV6
+ char packed[MAX(sizeof(struct in_addr), sizeof(struct in6_addr))];
+#else
+ char packed[sizeof(struct in_addr)];
+#endif
+ if (!PyArg_ParseTuple(args, "is:inet_pton", &af, &ip)) {
+ return NULL;
+ }
+
+#if !defined(ENABLE_IPV6) && defined(AF_INET6)
+ if(af == AF_INET6) {
+ PyErr_SetString(socket_error,
+ "can't use AF_INET6, IPv6 is disabled");
+ return NULL;
+ }
+#endif
+
+ retval = inet_pton(af, ip, packed);
+ if (retval < 0) {
+ PyErr_SetFromErrno(socket_error);
+ return NULL;
+ } else if (retval == 0) {
+ PyErr_SetString(socket_error,
+ "illegal IP address string passed to inet_pton");
+ return NULL;
+ } else if (af == AF_INET) {
+ return PyString_FromStringAndSize(packed,
+ sizeof(struct in_addr));
+#ifdef ENABLE_IPV6
+ } else if (af == AF_INET6) {
+ return PyString_FromStringAndSize(packed,
+ sizeof(struct in6_addr));
+#endif
+ } else {
+ PyErr_SetString(socket_error, "unknown address family");
+ return NULL;
+ }
+}
+
+PyDoc_STRVAR(inet_ntop_doc,
+"inet_ntop(af, packed_ip) -> string formatted IP address\n\
+\n\
+Convert a packed IP address of the given family to string format.");
+
+static PyObject *
+socket_inet_ntop(PyObject *self, PyObject *args)
+{
+ int af;
+ char* packed;
+ int len;
+ const char* retval;
+#ifdef ENABLE_IPV6
+ char ip[MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) + 1];
+#else
+ char ip[INET_ADDRSTRLEN + 1];
+#endif
+
+ /* Guarantee NUL-termination for PyString_FromString() below */
+ memset((void *) &ip[0], '\0', sizeof(ip));
+
+ if (!PyArg_ParseTuple(args, "is#:inet_ntop", &af, &packed, &len)) {
+ return NULL;
+ }
+
+ if (af == AF_INET) {
+ if (len != sizeof(struct in_addr)) {
+ PyErr_SetString(PyExc_ValueError,
+ "invalid length of packed IP address string");
+ return NULL;
+ }
+#ifdef ENABLE_IPV6
+ } else if (af == AF_INET6) {
+ if (len != sizeof(struct in6_addr)) {
+ PyErr_SetString(PyExc_ValueError,
+ "invalid length of packed IP address string");
+ return NULL;
+ }
+#endif
+ } else {
+ PyErr_Format(PyExc_ValueError,
+ "unknown address family %d", af);
+ return NULL;
+ }
+
+ retval = inet_ntop(af, packed, ip, sizeof(ip));
+ if (!retval) {
+ PyErr_SetFromErrno(socket_error);
+ return NULL;
+ } else {
+ return PyString_FromString(retval);
+ }
+
+ /* NOTREACHED */
+ PyErr_SetString(PyExc_RuntimeError, "invalid handling of inet_ntop");
+ return NULL;
+}
+
+#endif /* HAVE_INET_PTON */
+
+/* Python interface to getaddrinfo(host, port). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_getaddrinfo(PyObject *self, PyObject *args)
+{
+ struct addrinfo hints, *res;
+ struct addrinfo *res0 = NULL;
+ PyObject *hobj = NULL;
+ PyObject *pobj = (PyObject *)NULL;
+ char pbuf[30];
+ char *hptr, *pptr;
+ int family, socktype, protocol, flags;
+ int error;
+ PyObject *all = (PyObject *)NULL;
+ PyObject *single = (PyObject *)NULL;
+ PyObject *idna = NULL;
+
+ family = socktype = protocol = flags = 0;
+ family = AF_UNSPEC;
+ if (!PyArg_ParseTuple(args, "OO|iiii:getaddrinfo",
+ &hobj, &pobj, &family, &socktype,
+ &protocol, &flags)) {
+ return NULL;
+ }
+ if (hobj == Py_None) {
+ hptr = NULL;
+ } else if (PyUnicode_Check(hobj)) {
+ idna = PyObject_CallMethod(hobj, "encode", "s", "idna");
+ if (!idna)
+ return NULL;
+ hptr = PyString_AsString(idna);
+ } else if (PyString_Check(hobj)) {
+ hptr = PyString_AsString(hobj);
+ } else {
+ PyErr_SetString(PyExc_TypeError,
+ "getaddrinfo() argument 1 must be string or None");
+ return NULL;
+ }
+ if (PyInt_Check(pobj)) {
+ PyOS_snprintf(pbuf, sizeof(pbuf), "%ld", PyInt_AsLong(pobj));
+ pptr = pbuf;
+ } else if (PyString_Check(pobj)) {
+ pptr = PyString_AsString(pobj);
+ } else if (pobj == Py_None) {
+ pptr = (char *)NULL;
+ } else {
+ PyErr_SetString(socket_error, "Int or String expected");
+ goto err;
+ }
+ memset(&hints, 0, sizeof(hints));
+ hints.ai_family = family;
+ hints.ai_socktype = socktype;
+ hints.ai_protocol = protocol;
+ hints.ai_flags = flags;
+ Py_BEGIN_ALLOW_THREADS
+ ACQUIRE_GETADDRINFO_LOCK
+ error = getaddrinfo(hptr, pptr, &hints, &res0);
+ Py_END_ALLOW_THREADS
+ RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
+ if (error) {
+ set_gaierror(error);
+ goto err;
+ }
+
+ if ((all = PyList_New(0)) == NULL)
+ goto err;
+ for (res = res0; res; res = res->ai_next) {
+ PyObject *addr =
+ makesockaddr(-1, res->ai_addr, res->ai_addrlen, protocol);
+ if (addr == NULL)
+ goto err;
+ single = Py_BuildValue("iiisO", res->ai_family,
+ res->ai_socktype, res->ai_protocol,
+ res->ai_canonname ? res->ai_canonname : "",
+ addr);
+ Py_DECREF(addr);
+ if (single == NULL)
+ goto err;
+
+ if (PyList_Append(all, single))
+ goto err;
+ Py_XDECREF(single);
+ }
+ Py_XDECREF(idna);
+ if (res0)
+ freeaddrinfo(res0);
+ return all;
+ err:
+ Py_XDECREF(single);
+ Py_XDECREF(all);
+ Py_XDECREF(idna);
+ if (res0)
+ freeaddrinfo(res0);
+ return (PyObject *)NULL;
+}
+
+PyDoc_STRVAR(getaddrinfo_doc,
+"getaddrinfo(host, port [, family, socktype, proto, flags])\n\
+ -> list of (family, socktype, proto, canonname, sockaddr)\n\
+\n\
+Resolve host and port into addrinfo struct.");
+
+/* Python interface to getnameinfo(sa, flags). */
+
+/*ARGSUSED*/
+static PyObject *
+socket_getnameinfo(PyObject *self, PyObject *args)
+{
+ PyObject *sa = (PyObject *)NULL;
+ int flags;
+ char *hostp;
+ int port, flowinfo, scope_id;
+ char hbuf[NI_MAXHOST], pbuf[NI_MAXSERV];
+ struct addrinfo hints, *res = NULL;
+ int error;
+ PyObject *ret = (PyObject *)NULL;
+
+ flags = flowinfo = scope_id = 0;
+ if (!PyArg_ParseTuple(args, "Oi:getnameinfo", &sa, &flags))
+ return NULL;
+ if (!PyArg_ParseTuple(sa, "si|ii",
+ &hostp, &port, &flowinfo, &scope_id))
+ return NULL;
+ PyOS_snprintf(pbuf, sizeof(pbuf), "%d", port);
+ memset(&hints, 0, sizeof(hints));
+ hints.ai_family = AF_UNSPEC;
+ hints.ai_socktype = SOCK_DGRAM; /* make numeric port happy */
+ Py_BEGIN_ALLOW_THREADS
+ ACQUIRE_GETADDRINFO_LOCK
+ error = getaddrinfo(hostp, pbuf, &hints, &res);
+ Py_END_ALLOW_THREADS
+ RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
+ if (error) {
+ set_gaierror(error);
+ goto fail;
+ }
+ if (res->ai_next) {
+ PyErr_SetString(socket_error,
+ "sockaddr resolved to multiple addresses");
+ goto fail;
+ }
+ switch (res->ai_family) {
+ case AF_INET:
+ {
+ char *t1;
+ int t2;
+ if (PyArg_ParseTuple(sa, "si", &t1, &t2) == 0) {
+ PyErr_SetString(socket_error,
+ "IPv4 sockaddr must be 2 tuple");
+ goto fail;
+ }
+ break;
+ }
+#ifdef ENABLE_IPV6
+ case AF_INET6:
+ {
+ struct sockaddr_in6 *sin6;
+ sin6 = (struct sockaddr_in6 *)res->ai_addr;
+ sin6->sin6_flowinfo = flowinfo;
+ sin6->sin6_scope_id = scope_id;
+ break;
+ }
+#endif
+ }
+ error = getnameinfo(res->ai_addr, res->ai_addrlen,
+ hbuf, sizeof(hbuf), pbuf, sizeof(pbuf), flags);
+ if (error) {
+ set_gaierror(error);
+ goto fail;
+ }
+ ret = Py_BuildValue("ss", hbuf, pbuf);
+
+fail:
+ if (res)
+ freeaddrinfo(res);
+ return ret;
+}
+
+PyDoc_STRVAR(getnameinfo_doc,
+"getnameinfo(sockaddr, flags) --> (host, port)\n\
+\n\
+Get host and port for a sockaddr.");
+
+
+/* Python API to getting and setting the default timeout value. */
+
+static PyObject *
+socket_getdefaulttimeout(PyObject *self)
+{
+ if (defaulttimeout < 0.0) {
+ Py_INCREF(Py_None);
+ return Py_None;
+ }
+ else
+ return PyFloat_FromDouble(defaulttimeout);
+}
+
+PyDoc_STRVAR(getdefaulttimeout_doc,
+"getdefaulttimeout() -> timeout\n\
+\n\
+Returns the default timeout in floating seconds for new socket objects.\n\
+A value of None indicates that new socket objects have no timeout.\n\
+When the socket module is first imported, the default is None.");
+
+static PyObject *
+socket_setdefaulttimeout(PyObject *self, PyObject *arg)
+{
+ double timeout;
+
+ if (arg == Py_None)
+ timeout = -1.0;
+ else {
+ timeout = PyFloat_AsDouble(arg);
+ if (timeout < 0.0) {
+ if (!PyErr_Occurred())
+ PyErr_SetString(PyExc_ValueError,
+ "Timeout value out of range");
+ return NULL;
+ }
+ }
+
+ defaulttimeout = timeout;
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(setdefaulttimeout_doc,
+"setdefaulttimeout(timeout)\n\
+\n\
+Set the default timeout in floating seconds for new socket objects.\n\
+A value of None indicates that new socket objects have no timeout.\n\
+When the socket module is first imported, the default is None.");
+
+
+/* List of functions exported by this module. */
+
+static PyMethodDef socket_methods[] = {
+ {"gethostbyname", socket_gethostbyname,
+ METH_VARARGS, gethostbyname_doc},
+ {"gethostbyname_ex", socket_gethostbyname_ex,
+ METH_VARARGS, ghbn_ex_doc},
+ {"gethostbyaddr", socket_gethostbyaddr,
+ METH_VARARGS, gethostbyaddr_doc},
+ {"gethostname", socket_gethostname,
+ METH_NOARGS, gethostname_doc},
+ {"getservbyname", socket_getservbyname,
+ METH_VARARGS, getservbyname_doc},
+ {"getservbyport", socket_getservbyport,
+ METH_VARARGS, getservbyport_doc},
+ {"getprotobyname", socket_getprotobyname,
+ METH_VARARGS, getprotobyname_doc},
+#ifndef NO_DUP
+ {"fromfd", socket_fromfd,
+ METH_VARARGS, fromfd_doc},
+#endif
+#ifdef HAVE_SOCKETPAIR
+ {"socketpair", socket_socketpair,
+ METH_VARARGS, socketpair_doc},
+#endif
+ {"ntohs", socket_ntohs,
+ METH_VARARGS, ntohs_doc},
+ {"ntohl", socket_ntohl,
+ METH_O, ntohl_doc},
+ {"htons", socket_htons,
+ METH_VARARGS, htons_doc},
+ {"htonl", socket_htonl,
+ METH_O, htonl_doc},
+ {"inet_aton", socket_inet_aton,
+ METH_VARARGS, inet_aton_doc},
+ {"inet_ntoa", socket_inet_ntoa,
+ METH_VARARGS, inet_ntoa_doc},
+#ifdef HAVE_INET_PTON
+ {"inet_pton", socket_inet_pton,
+ METH_VARARGS, inet_pton_doc},
+ {"inet_ntop", socket_inet_ntop,
+ METH_VARARGS, inet_ntop_doc},
+#endif
+ {"getaddrinfo", socket_getaddrinfo,
+ METH_VARARGS, getaddrinfo_doc},
+ {"getnameinfo", socket_getnameinfo,
+ METH_VARARGS, getnameinfo_doc},
+ {"getdefaulttimeout", (PyCFunction)socket_getdefaulttimeout,
+ METH_NOARGS, getdefaulttimeout_doc},
+ {"setdefaulttimeout", socket_setdefaulttimeout,
+ METH_O, setdefaulttimeout_doc},
+ {NULL, NULL} /* Sentinel */
+};
+
+
+#ifdef RISCOS
+#define OS_INIT_DEFINED
+
+static int
+os_init(void)
+{
+ _kernel_swi_regs r;
+
+ r.r[0] = 0;
+ _kernel_swi(0x43380, &r, &r);
+ taskwindow = r.r[0];
+
+ return 1;
+}
+
+#endif /* RISCOS */
+
+
+#ifdef MS_WINDOWS
+#define OS_INIT_DEFINED
+
+/* Additional initialization and cleanup for Windows */
+
+static void
+os_cleanup(void)
+{
+ WSACleanup();
+}
+
+static int
+os_init(void)
+{
+ WSADATA WSAData;
+ int ret;
+ char buf[100];
+ ret = WSAStartup(0x0101, &WSAData);
+ switch (ret) {
+ case 0: /* No error */
+ Py_AtExit(os_cleanup);
+ return 1; /* Success */
+ case WSASYSNOTREADY:
+ PyErr_SetString(PyExc_ImportError,
+ "WSAStartup failed: network not ready");
+ break;
+ case WSAVERNOTSUPPORTED:
+ case WSAEINVAL:
+ PyErr_SetString(
+ PyExc_ImportError,
+ "WSAStartup failed: requested version not supported");
+ break;
+ default:
+ PyOS_snprintf(buf, sizeof(buf),
+ "WSAStartup failed: error code %d", ret);
+ PyErr_SetString(PyExc_ImportError, buf);
+ break;
+ }
+ return 0; /* Failure */
+}
+
+#endif /* MS_WINDOWS */
+
+
+#ifdef PYOS_OS2
+#define OS_INIT_DEFINED
+
+/* Additional initialization for OS/2 */
+
+static int
+os_init(void)
+{
+#ifndef PYCC_GCC
+ char reason[64];
+ int rc = sock_init();
+
+ if (rc == 0) {
+ return 1; /* Success */
+ }
+
+ PyOS_snprintf(reason, sizeof(reason),
+ "OS/2 TCP/IP Error# %d", sock_errno());
+ PyErr_SetString(PyExc_ImportError, reason);
+
+ return 0; /* Failure */
+#else
+ /* No need to initialise sockets with GCC/EMX */
+ return 1; /* Success */
+#endif
+}
+
+#endif /* PYOS_OS2 */
+
+
+#ifndef OS_INIT_DEFINED
+static int
+os_init(void)
+{
+ return 1; /* Success */
+}
+#endif
+
+
+/* C API table - always add new things to the end for binary
+ compatibility. */
+static
+PySocketModule_APIObject PySocketModuleAPI =
+{
+ &sock_type,
+ NULL
+};
+
+
+/* Initialize the _socket module.
+
+ This module is actually called "_socket", and there's a wrapper
+ "socket.py" which implements some additional functionality. On some
+ platforms (e.g. Windows and OS/2), socket.py also implements a
+ wrapper for the socket type that provides missing functionality such
+ as makefile(), dup() and fromfd(). The import of "_socket" may fail
+ with an ImportError exception if os-specific initialization fails.
+ On Windows, this does WINSOCK initialization. When WINSOCK is
+ initialized succesfully, a call to WSACleanup() is scheduled to be
+ made at exit time.
+*/
+
+PyDoc_STRVAR(socket_doc,
+"Implementation module for socket operations.\n\
+\n\
+See the socket module for documentation.");
+
+PyMODINIT_FUNC
+init_socket(void)
+{
+ PyObject *m, *has_ipv6;
+
+ if (!os_init())
+ return;
+
+ Py_TYPE(&sock_type) = &PyType_Type;
+ m = Py_InitModule3(PySocket_MODULE_NAME,
+ socket_methods,
+ socket_doc);
+ if (m == NULL)
+ return;
+
+ socket_error = PyErr_NewException("socket.error",
+ PyExc_IOError, NULL);
+ if (socket_error == NULL)
+ return;
+ PySocketModuleAPI.error = socket_error;
+ Py_INCREF(socket_error);
+ PyModule_AddObject(m, "error", socket_error);
+ socket_herror = PyErr_NewException("socket.herror",
+ socket_error, NULL);
+ if (socket_herror == NULL)
+ return;
+ Py_INCREF(socket_herror);
+ PyModule_AddObject(m, "herror", socket_herror);
+ socket_gaierror = PyErr_NewException("socket.gaierror", socket_error,
+ NULL);
+ if (socket_gaierror == NULL)
+ return;
+ Py_INCREF(socket_gaierror);
+ PyModule_AddObject(m, "gaierror", socket_gaierror);
+ socket_timeout = PyErr_NewException("socket.timeout",
+ socket_error, NULL);
+ if (socket_timeout == NULL)
+ return;
+ Py_INCREF(socket_timeout);
+ PyModule_AddObject(m, "timeout", socket_timeout);
+ Py_INCREF((PyObject *)&sock_type);
+ if (PyModule_AddObject(m, "SocketType",
+ (PyObject *)&sock_type) != 0)
+ return;
+ Py_INCREF((PyObject *)&sock_type);
+ if (PyModule_AddObject(m, "socket",
+ (PyObject *)&sock_type) != 0)
+ return;
+
+#ifdef ENABLE_IPV6
+ has_ipv6 = Py_True;
+#else
+ has_ipv6 = Py_False;
+#endif
+ Py_INCREF(has_ipv6);
+ PyModule_AddObject(m, "has_ipv6", has_ipv6);
+
+ /* Export C API */
+ if (PyModule_AddObject(m, PySocket_CAPI_NAME,
+ PyCObject_FromVoidPtr((void *)&PySocketModuleAPI, NULL)
+ ) != 0)
+ return;
+
+ /* Address families (we only support AF_INET and AF_UNIX) */
+#ifdef AF_UNSPEC
+ PyModule_AddIntConstant(m, "AF_UNSPEC", AF_UNSPEC);
+#endif
+ PyModule_AddIntConstant(m, "AF_INET", AF_INET);
+#ifdef AF_INET6
+ PyModule_AddIntConstant(m, "AF_INET6", AF_INET6);
+#endif /* AF_INET6 */
+#if defined(AF_UNIX)
+ PyModule_AddIntConstant(m, "AF_UNIX", AF_UNIX);
+#endif /* AF_UNIX */
+#ifdef AF_AX25
+ /* Amateur Radio AX.25 */
+ PyModule_AddIntConstant(m, "AF_AX25", AF_AX25);
+#endif
+#ifdef AF_IPX
+ PyModule_AddIntConstant(m, "AF_IPX", AF_IPX); /* Novell IPX */
+#endif
+#ifdef AF_APPLETALK
+ /* Appletalk DDP */
+ PyModule_AddIntConstant(m, "AF_APPLETALK", AF_APPLETALK);
+#endif
+#ifdef AF_NETROM
+ /* Amateur radio NetROM */
+ PyModule_AddIntConstant(m, "AF_NETROM", AF_NETROM);
+#endif
+#ifdef AF_BRIDGE
+ /* Multiprotocol bridge */
+ PyModule_AddIntConstant(m, "AF_BRIDGE", AF_BRIDGE);
+#endif
+#ifdef AF_ATMPVC
+ /* ATM PVCs */
+ PyModule_AddIntConstant(m, "AF_ATMPVC", AF_ATMPVC);
+#endif
+#ifdef AF_AAL5
+ /* Reserved for Werner's ATM */
+ PyModule_AddIntConstant(m, "AF_AAL5", AF_AAL5);
+#endif
+#ifdef AF_X25
+ /* Reserved for X.25 project */
+ PyModule_AddIntConstant(m, "AF_X25", AF_X25);
+#endif
+#ifdef AF_INET6
+ PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IP version 6 */
+#endif
+#ifdef AF_ROSE
+ /* Amateur Radio X.25 PLP */
+ PyModule_AddIntConstant(m, "AF_ROSE", AF_ROSE);
+#endif
+#ifdef AF_DECnet
+ /* Reserved for DECnet project */
+ PyModule_AddIntConstant(m, "AF_DECnet", AF_DECnet);
+#endif
+#ifdef AF_NETBEUI
+ /* Reserved for 802.2LLC project */
+ PyModule_AddIntConstant(m, "AF_NETBEUI", AF_NETBEUI);
+#endif
+#ifdef AF_SECURITY
+ /* Security callback pseudo AF */
+ PyModule_AddIntConstant(m, "AF_SECURITY", AF_SECURITY);
+#endif
+#ifdef AF_KEY
+ /* PF_KEY key management API */
+ PyModule_AddIntConstant(m, "AF_KEY", AF_KEY);
+#endif
+#ifdef AF_NETLINK
+ /* */
+ PyModule_AddIntConstant(m, "AF_NETLINK", AF_NETLINK);
+ PyModule_AddIntConstant(m, "NETLINK_ROUTE", NETLINK_ROUTE);
+#ifdef NETLINK_SKIP
+ PyModule_AddIntConstant(m, "NETLINK_SKIP", NETLINK_SKIP);
+#endif
+#ifdef NETLINK_W1
+ PyModule_AddIntConstant(m, "NETLINK_W1", NETLINK_W1);
+#endif
+ PyModule_AddIntConstant(m, "NETLINK_USERSOCK", NETLINK_USERSOCK);
+ PyModule_AddIntConstant(m, "NETLINK_FIREWALL", NETLINK_FIREWALL);
+#ifdef NETLINK_TCPDIAG
+ PyModule_AddIntConstant(m, "NETLINK_TCPDIAG", NETLINK_TCPDIAG);
+#endif
+#ifdef NETLINK_NFLOG
+ PyModule_AddIntConstant(m, "NETLINK_NFLOG", NETLINK_NFLOG);
+#endif
+#ifdef NETLINK_XFRM
+ PyModule_AddIntConstant(m, "NETLINK_XFRM", NETLINK_XFRM);
+#endif
+#ifdef NETLINK_ARPD
+ PyModule_AddIntConstant(m, "NETLINK_ARPD", NETLINK_ARPD);
+#endif
+#ifdef NETLINK_ROUTE6
+ PyModule_AddIntConstant(m, "NETLINK_ROUTE6", NETLINK_ROUTE6);
+#endif
+ PyModule_AddIntConstant(m, "NETLINK_IP6_FW", NETLINK_IP6_FW);
+#ifdef NETLINK_DNRTMSG
+ PyModule_AddIntConstant(m, "NETLINK_DNRTMSG", NETLINK_DNRTMSG);
+#endif
+#ifdef NETLINK_TAPBASE
+ PyModule_AddIntConstant(m, "NETLINK_TAPBASE", NETLINK_TAPBASE);
+#endif
+#endif /* AF_NETLINK */
+#ifdef AF_ROUTE
+ /* Alias to emulate 4.4BSD */
+ PyModule_AddIntConstant(m, "AF_ROUTE", AF_ROUTE);
+#endif
+#ifdef AF_ASH
+ /* Ash */
+ PyModule_AddIntConstant(m, "AF_ASH", AF_ASH);
+#endif
+#ifdef AF_ECONET
+ /* Acorn Econet */
+ PyModule_AddIntConstant(m, "AF_ECONET", AF_ECONET);
+#endif
+#ifdef AF_ATMSVC
+ /* ATM SVCs */
+ PyModule_AddIntConstant(m, "AF_ATMSVC", AF_ATMSVC);
+#endif
+#ifdef AF_SNA
+ /* Linux SNA Project (nutters!) */
+ PyModule_AddIntConstant(m, "AF_SNA", AF_SNA);
+#endif
+#ifdef AF_IRDA
+ /* IRDA sockets */
+ PyModule_AddIntConstant(m, "AF_IRDA", AF_IRDA);
+#endif
+#ifdef AF_PPPOX
+ /* PPPoX sockets */
+ PyModule_AddIntConstant(m, "AF_PPPOX", AF_PPPOX);
+#endif
+#ifdef AF_WANPIPE
+ /* Wanpipe API Sockets */
+ PyModule_AddIntConstant(m, "AF_WANPIPE", AF_WANPIPE);
+#endif
+#ifdef AF_LLC
+ /* Linux LLC */
+ PyModule_AddIntConstant(m, "AF_LLC", AF_LLC);
+#endif
+
+#ifdef USE_BLUETOOTH
+ PyModule_AddIntConstant(m, "AF_BLUETOOTH", AF_BLUETOOTH);
+ PyModule_AddIntConstant(m, "BTPROTO_L2CAP", BTPROTO_L2CAP);
+ PyModule_AddIntConstant(m, "BTPROTO_HCI", BTPROTO_HCI);
+ PyModule_AddIntConstant(m, "SOL_HCI", SOL_HCI);
+ PyModule_AddIntConstant(m, "HCI_FILTER", HCI_FILTER);
+#if !defined(__FreeBSD__)
+ PyModule_AddIntConstant(m, "HCI_TIME_STAMP", HCI_TIME_STAMP);
+ PyModule_AddIntConstant(m, "HCI_DATA_DIR", HCI_DATA_DIR);
+ PyModule_AddIntConstant(m, "BTPROTO_SCO", BTPROTO_SCO);
+#endif
+ PyModule_AddIntConstant(m, "BTPROTO_RFCOMM", BTPROTO_RFCOMM);
+ PyModule_AddStringConstant(m, "BDADDR_ANY", "00:00:00:00:00:00");
+ PyModule_AddStringConstant(m, "BDADDR_LOCAL", "00:00:00:FF:FF:FF");
+#endif
+
+#ifdef HAVE_NETPACKET_PACKET_H
+ PyModule_AddIntConstant(m, "AF_PACKET", AF_PACKET);
+ PyModule_AddIntConstant(m, "PF_PACKET", PF_PACKET);
+ PyModule_AddIntConstant(m, "PACKET_HOST", PACKET_HOST);
+ PyModule_AddIntConstant(m, "PACKET_BROADCAST", PACKET_BROADCAST);
+ PyModule_AddIntConstant(m, "PACKET_MULTICAST", PACKET_MULTICAST);
+ PyModule_AddIntConstant(m, "PACKET_OTHERHOST", PACKET_OTHERHOST);
+ PyModule_AddIntConstant(m, "PACKET_OUTGOING", PACKET_OUTGOING);
+ PyModule_AddIntConstant(m, "PACKET_LOOPBACK", PACKET_LOOPBACK);
+ PyModule_AddIntConstant(m, "PACKET_FASTROUTE", PACKET_FASTROUTE);
+#endif
+
+#ifdef HAVE_LINUX_TIPC_H
+ PyModule_AddIntConstant(m, "AF_TIPC", AF_TIPC);
+
+ /* for addresses */
+ PyModule_AddIntConstant(m, "TIPC_ADDR_NAMESEQ", TIPC_ADDR_NAMESEQ);
+ PyModule_AddIntConstant(m, "TIPC_ADDR_NAME", TIPC_ADDR_NAME);
+ PyModule_AddIntConstant(m, "TIPC_ADDR_ID", TIPC_ADDR_ID);
+
+ PyModule_AddIntConstant(m, "TIPC_ZONE_SCOPE", TIPC_ZONE_SCOPE);
+ PyModule_AddIntConstant(m, "TIPC_CLUSTER_SCOPE", TIPC_CLUSTER_SCOPE);
+ PyModule_AddIntConstant(m, "TIPC_NODE_SCOPE", TIPC_NODE_SCOPE);
+
+ /* for setsockopt() */
+ PyModule_AddIntConstant(m, "SOL_TIPC", SOL_TIPC);
+ PyModule_AddIntConstant(m, "TIPC_IMPORTANCE", TIPC_IMPORTANCE);
+ PyModule_AddIntConstant(m, "TIPC_SRC_DROPPABLE", TIPC_SRC_DROPPABLE);
+ PyModule_AddIntConstant(m, "TIPC_DEST_DROPPABLE",
+ TIPC_DEST_DROPPABLE);
+ PyModule_AddIntConstant(m, "TIPC_CONN_TIMEOUT", TIPC_CONN_TIMEOUT);
+
+ PyModule_AddIntConstant(m, "TIPC_LOW_IMPORTANCE",
+ TIPC_LOW_IMPORTANCE);
+ PyModule_AddIntConstant(m, "TIPC_MEDIUM_IMPORTANCE",
+ TIPC_MEDIUM_IMPORTANCE);
+ PyModule_AddIntConstant(m, "TIPC_HIGH_IMPORTANCE",
+ TIPC_HIGH_IMPORTANCE);
+ PyModule_AddIntConstant(m, "TIPC_CRITICAL_IMPORTANCE",
+ TIPC_CRITICAL_IMPORTANCE);
+
+ /* for subscriptions */
+ PyModule_AddIntConstant(m, "TIPC_SUB_PORTS", TIPC_SUB_PORTS);
+ PyModule_AddIntConstant(m, "TIPC_SUB_SERVICE", TIPC_SUB_SERVICE);
+#ifdef TIPC_SUB_CANCEL
+ /* doesn't seem to be available everywhere */
+ PyModule_AddIntConstant(m, "TIPC_SUB_CANCEL", TIPC_SUB_CANCEL);
+#endif
+ PyModule_AddIntConstant(m, "TIPC_WAIT_FOREVER", TIPC_WAIT_FOREVER);
+ PyModule_AddIntConstant(m, "TIPC_PUBLISHED", TIPC_PUBLISHED);
+ PyModule_AddIntConstant(m, "TIPC_WITHDRAWN", TIPC_WITHDRAWN);
+ PyModule_AddIntConstant(m, "TIPC_SUBSCR_TIMEOUT", TIPC_SUBSCR_TIMEOUT);
+ PyModule_AddIntConstant(m, "TIPC_CFG_SRV", TIPC_CFG_SRV);
+ PyModule_AddIntConstant(m, "TIPC_TOP_SRV", TIPC_TOP_SRV);
+#endif
+
+ /* Socket types */
+ PyModule_AddIntConstant(m, "SOCK_STREAM", SOCK_STREAM);
+ PyModule_AddIntConstant(m, "SOCK_DGRAM", SOCK_DGRAM);
+#ifndef __BEOS__
+/* We have incomplete socket support. */
+ PyModule_AddIntConstant(m, "SOCK_RAW", SOCK_RAW);
+ PyModule_AddIntConstant(m, "SOCK_SEQPACKET", SOCK_SEQPACKET);
+#if defined(SOCK_RDM)
+ PyModule_AddIntConstant(m, "SOCK_RDM", SOCK_RDM);
+#endif
+#endif
+
+#ifdef SO_DEBUG
+ PyModule_AddIntConstant(m, "SO_DEBUG", SO_DEBUG);
+#endif
+#ifdef SO_ACCEPTCONN
+ PyModule_AddIntConstant(m, "SO_ACCEPTCONN", SO_ACCEPTCONN);
+#endif
+#ifdef SO_REUSEADDR
+ PyModule_AddIntConstant(m, "SO_REUSEADDR", SO_REUSEADDR);
+#endif
+#ifdef SO_EXCLUSIVEADDRUSE
+ PyModule_AddIntConstant(m, "SO_EXCLUSIVEADDRUSE", SO_EXCLUSIVEADDRUSE);
+#endif
+
+#ifdef SO_KEEPALIVE
+ PyModule_AddIntConstant(m, "SO_KEEPALIVE", SO_KEEPALIVE);
+#endif
+#ifdef SO_DONTROUTE
+ PyModule_AddIntConstant(m, "SO_DONTROUTE", SO_DONTROUTE);
+#endif
+#ifdef SO_BROADCAST
+ PyModule_AddIntConstant(m, "SO_BROADCAST", SO_BROADCAST);
+#endif
+#ifdef SO_USELOOPBACK
+ PyModule_AddIntConstant(m, "SO_USELOOPBACK", SO_USELOOPBACK);
+#endif
+#ifdef SO_LINGER
+ PyModule_AddIntConstant(m, "SO_LINGER", SO_LINGER);
+#endif
+#ifdef SO_OOBINLINE
+ PyModule_AddIntConstant(m, "SO_OOBINLINE", SO_OOBINLINE);
+#endif
+#ifdef SO_REUSEPORT
+ PyModule_AddIntConstant(m, "SO_REUSEPORT", SO_REUSEPORT);
+#endif
+#ifdef SO_SNDBUF
+ PyModule_AddIntConstant(m, "SO_SNDBUF", SO_SNDBUF);
+#endif
+#ifdef SO_RCVBUF
+ PyModule_AddIntConstant(m, "SO_RCVBUF", SO_RCVBUF);
+#endif
+#ifdef SO_SNDLOWAT
+ PyModule_AddIntConstant(m, "SO_SNDLOWAT", SO_SNDLOWAT);
+#endif
+#ifdef SO_RCVLOWAT
+ PyModule_AddIntConstant(m, "SO_RCVLOWAT", SO_RCVLOWAT);
+#endif
+#ifdef SO_SNDTIMEO
+ PyModule_AddIntConstant(m, "SO_SNDTIMEO", SO_SNDTIMEO);
+#endif
+#ifdef SO_RCVTIMEO
+ PyModule_AddIntConstant(m, "SO_RCVTIMEO", SO_RCVTIMEO);
+#endif
+#ifdef SO_ERROR
+ PyModule_AddIntConstant(m, "SO_ERROR", SO_ERROR);
+#endif
+#ifdef SO_TYPE
+ PyModule_AddIntConstant(m, "SO_TYPE", SO_TYPE);
+#endif
+
+ /* Maximum number of connections for "listen" */
+#ifdef SOMAXCONN
+ PyModule_AddIntConstant(m, "SOMAXCONN", SOMAXCONN);
+#else
+ PyModule_AddIntConstant(m, "SOMAXCONN", 5); /* Common value */
+#endif
+
+ /* Flags for send, recv */
+#ifdef MSG_OOB
+ PyModule_AddIntConstant(m, "MSG_OOB", MSG_OOB);
+#endif
+#ifdef MSG_PEEK
+ PyModule_AddIntConstant(m, "MSG_PEEK", MSG_PEEK);
+#endif
+#ifdef MSG_DONTROUTE
+ PyModule_AddIntConstant(m, "MSG_DONTROUTE", MSG_DONTROUTE);
+#endif
+#ifdef MSG_DONTWAIT
+ PyModule_AddIntConstant(m, "MSG_DONTWAIT", MSG_DONTWAIT);
+#endif
+#ifdef MSG_EOR
+ PyModule_AddIntConstant(m, "MSG_EOR", MSG_EOR);
+#endif
+#ifdef MSG_TRUNC
+ PyModule_AddIntConstant(m, "MSG_TRUNC", MSG_TRUNC);
+#endif
+#ifdef MSG_CTRUNC
+ PyModule_AddIntConstant(m, "MSG_CTRUNC", MSG_CTRUNC);
+#endif
+#ifdef MSG_WAITALL
+ PyModule_AddIntConstant(m, "MSG_WAITALL", MSG_WAITALL);
+#endif
+#ifdef MSG_BTAG
+ PyModule_AddIntConstant(m, "MSG_BTAG", MSG_BTAG);
+#endif
+#ifdef MSG_ETAG
+ PyModule_AddIntConstant(m, "MSG_ETAG", MSG_ETAG);
+#endif
+
+ /* Protocol level and numbers, usable for [gs]etsockopt */
+#ifdef SOL_SOCKET
+ PyModule_AddIntConstant(m, "SOL_SOCKET", SOL_SOCKET);
+#endif
+#ifdef SOL_IP
+ PyModule_AddIntConstant(m, "SOL_IP", SOL_IP);
+#else
+ PyModule_AddIntConstant(m, "SOL_IP", 0);
+#endif
+#ifdef SOL_IPX
+ PyModule_AddIntConstant(m, "SOL_IPX", SOL_IPX);
+#endif
+#ifdef SOL_AX25
+ PyModule_AddIntConstant(m, "SOL_AX25", SOL_AX25);
+#endif
+#ifdef SOL_ATALK
+ PyModule_AddIntConstant(m, "SOL_ATALK", SOL_ATALK);
+#endif
+#ifdef SOL_NETROM
+ PyModule_AddIntConstant(m, "SOL_NETROM", SOL_NETROM);
+#endif
+#ifdef SOL_ROSE
+ PyModule_AddIntConstant(m, "SOL_ROSE", SOL_ROSE);
+#endif
+#ifdef SOL_TCP
+ PyModule_AddIntConstant(m, "SOL_TCP", SOL_TCP);
+#else
+ PyModule_AddIntConstant(m, "SOL_TCP", 6);
+#endif
+#ifdef SOL_UDP
+ PyModule_AddIntConstant(m, "SOL_UDP", SOL_UDP);
+#else
+ PyModule_AddIntConstant(m, "SOL_UDP", 17);
+#endif
+#ifdef IPPROTO_IP
+ PyModule_AddIntConstant(m, "IPPROTO_IP", IPPROTO_IP);
+#else
+ PyModule_AddIntConstant(m, "IPPROTO_IP", 0);
+#endif
+#ifdef IPPROTO_HOPOPTS
+ PyModule_AddIntConstant(m, "IPPROTO_HOPOPTS", IPPROTO_HOPOPTS);
+#endif
+#ifdef IPPROTO_ICMP
+ PyModule_AddIntConstant(m, "IPPROTO_ICMP", IPPROTO_ICMP);
+#else
+ PyModule_AddIntConstant(m, "IPPROTO_ICMP", 1);
+#endif
+#ifdef IPPROTO_IGMP
+ PyModule_AddIntConstant(m, "IPPROTO_IGMP", IPPROTO_IGMP);
+#endif
+#ifdef IPPROTO_GGP
+ PyModule_AddIntConstant(m, "IPPROTO_GGP", IPPROTO_GGP);
+#endif
+#ifdef IPPROTO_IPV4
+ PyModule_AddIntConstant(m, "IPPROTO_IPV4", IPPROTO_IPV4);
+#endif
+#ifdef IPPROTO_IPV6
+ PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6);
+#endif
+#ifdef IPPROTO_IPIP
+ PyModule_AddIntConstant(m, "IPPROTO_IPIP", IPPROTO_IPIP);
+#endif
+#ifdef IPPROTO_TCP
+ PyModule_AddIntConstant(m, "IPPROTO_TCP", IPPROTO_TCP);
+#else
+ PyModule_AddIntConstant(m, "IPPROTO_TCP", 6);
+#endif
+#ifdef IPPROTO_EGP
+ PyModule_AddIntConstant(m, "IPPROTO_EGP", IPPROTO_EGP);
+#endif
+#ifdef IPPROTO_PUP
+ PyModule_AddIntConstant(m, "IPPROTO_PUP", IPPROTO_PUP);
+#endif
+#ifdef IPPROTO_UDP
+ PyModule_AddIntConstant(m, "IPPROTO_UDP", IPPROTO_UDP);
+#else
+ PyModule_AddIntConstant(m, "IPPROTO_UDP", 17);
+#endif
+#ifdef IPPROTO_IDP
+ PyModule_AddIntConstant(m, "IPPROTO_IDP", IPPROTO_IDP);
+#endif
+#ifdef IPPROTO_HELLO
+ PyModule_AddIntConstant(m, "IPPROTO_HELLO", IPPROTO_HELLO);
+#endif
+#ifdef IPPROTO_ND
+ PyModule_AddIntConstant(m, "IPPROTO_ND", IPPROTO_ND);
+#endif
+#ifdef IPPROTO_TP
+ PyModule_AddIntConstant(m, "IPPROTO_TP", IPPROTO_TP);
+#endif
+#ifdef IPPROTO_IPV6
+ PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6);
+#endif
+#ifdef IPPROTO_ROUTING
+ PyModule_AddIntConstant(m, "IPPROTO_ROUTING", IPPROTO_ROUTING);
+#endif
+#ifdef IPPROTO_FRAGMENT
+ PyModule_AddIntConstant(m, "IPPROTO_FRAGMENT", IPPROTO_FRAGMENT);
+#endif
+#ifdef IPPROTO_RSVP
+ PyModule_AddIntConstant(m, "IPPROTO_RSVP", IPPROTO_RSVP);
+#endif
+#ifdef IPPROTO_GRE
+ PyModule_AddIntConstant(m, "IPPROTO_GRE", IPPROTO_GRE);
+#endif
+#ifdef IPPROTO_ESP
+ PyModule_AddIntConstant(m, "IPPROTO_ESP", IPPROTO_ESP);
+#endif
+#ifdef IPPROTO_AH
+ PyModule_AddIntConstant(m, "IPPROTO_AH", IPPROTO_AH);
+#endif
+#ifdef IPPROTO_MOBILE
+ PyModule_AddIntConstant(m, "IPPROTO_MOBILE", IPPROTO_MOBILE);
+#endif
+#ifdef IPPROTO_ICMPV6
+ PyModule_AddIntConstant(m, "IPPROTO_ICMPV6", IPPROTO_ICMPV6);
+#endif
+#ifdef IPPROTO_NONE
+ PyModule_AddIntConstant(m, "IPPROTO_NONE", IPPROTO_NONE);
+#endif
+#ifdef IPPROTO_DSTOPTS
+ PyModule_AddIntConstant(m, "IPPROTO_DSTOPTS", IPPROTO_DSTOPTS);
+#endif
+#ifdef IPPROTO_XTP
+ PyModule_AddIntConstant(m, "IPPROTO_XTP", IPPROTO_XTP);
+#endif
+#ifdef IPPROTO_EON
+ PyModule_AddIntConstant(m, "IPPROTO_EON", IPPROTO_EON);
+#endif
+#ifdef IPPROTO_PIM
+ PyModule_AddIntConstant(m, "IPPROTO_PIM", IPPROTO_PIM);
+#endif
+#ifdef IPPROTO_IPCOMP
+ PyModule_AddIntConstant(m, "IPPROTO_IPCOMP", IPPROTO_IPCOMP);
+#endif
+#ifdef IPPROTO_VRRP
+ PyModule_AddIntConstant(m, "IPPROTO_VRRP", IPPROTO_VRRP);
+#endif
+#ifdef IPPROTO_BIP
+ PyModule_AddIntConstant(m, "IPPROTO_BIP", IPPROTO_BIP);
+#endif
+/**/
+#ifdef IPPROTO_RAW
+ PyModule_AddIntConstant(m, "IPPROTO_RAW", IPPROTO_RAW);
+#else
+ PyModule_AddIntConstant(m, "IPPROTO_RAW", 255);
+#endif
+#ifdef IPPROTO_MAX
+ PyModule_AddIntConstant(m, "IPPROTO_MAX", IPPROTO_MAX);
+#endif
+
+ /* Some port configuration */
+#ifdef IPPORT_RESERVED
+ PyModule_AddIntConstant(m, "IPPORT_RESERVED", IPPORT_RESERVED);
+#else
+ PyModule_AddIntConstant(m, "IPPORT_RESERVED", 1024);
+#endif
+#ifdef IPPORT_USERRESERVED
+ PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", IPPORT_USERRESERVED);
+#else
+ PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", 5000);
+#endif
+
+ /* Some reserved IP v.4 addresses */
+#ifdef INADDR_ANY
+ PyModule_AddIntConstant(m, "INADDR_ANY", INADDR_ANY);
+#else
+ PyModule_AddIntConstant(m, "INADDR_ANY", 0x00000000);
+#endif
+#ifdef INADDR_BROADCAST
+ PyModule_AddIntConstant(m, "INADDR_BROADCAST", INADDR_BROADCAST);
+#else
+ PyModule_AddIntConstant(m, "INADDR_BROADCAST", 0xffffffff);
+#endif
+#ifdef INADDR_LOOPBACK
+ PyModule_AddIntConstant(m, "INADDR_LOOPBACK", INADDR_LOOPBACK);
+#else
+ PyModule_AddIntConstant(m, "INADDR_LOOPBACK", 0x7F000001);
+#endif
+#ifdef INADDR_UNSPEC_GROUP
+ PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", INADDR_UNSPEC_GROUP);
+#else
+ PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", 0xe0000000);
+#endif
+#ifdef INADDR_ALLHOSTS_GROUP
+ PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP",
+ INADDR_ALLHOSTS_GROUP);
+#else
+ PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP", 0xe0000001);
+#endif
+#ifdef INADDR_MAX_LOCAL_GROUP
+ PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP",
+ INADDR_MAX_LOCAL_GROUP);
+#else
+ PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP", 0xe00000ff);
+#endif
+#ifdef INADDR_NONE
+ PyModule_AddIntConstant(m, "INADDR_NONE", INADDR_NONE);
+#else
+ PyModule_AddIntConstant(m, "INADDR_NONE", 0xffffffff);
+#endif
+
+ /* IPv4 [gs]etsockopt options */
+#ifdef IP_OPTIONS
+ PyModule_AddIntConstant(m, "IP_OPTIONS", IP_OPTIONS);
+#endif
+#ifdef IP_HDRINCL
+ PyModule_AddIntConstant(m, "IP_HDRINCL", IP_HDRINCL);
+#endif
+#ifdef IP_TOS
+ PyModule_AddIntConstant(m, "IP_TOS", IP_TOS);
+#endif
+#ifdef IP_TTL
+ PyModule_AddIntConstant(m, "IP_TTL", IP_TTL);
+#endif
+#ifdef IP_RECVOPTS
+ PyModule_AddIntConstant(m, "IP_RECVOPTS", IP_RECVOPTS);
+#endif
+#ifdef IP_RECVRETOPTS
+ PyModule_AddIntConstant(m, "IP_RECVRETOPTS", IP_RECVRETOPTS);
+#endif
+#ifdef IP_RECVDSTADDR
+ PyModule_AddIntConstant(m, "IP_RECVDSTADDR", IP_RECVDSTADDR);
+#endif
+#ifdef IP_RETOPTS
+ PyModule_AddIntConstant(m, "IP_RETOPTS", IP_RETOPTS);
+#endif
+#ifdef IP_MULTICAST_IF
+ PyModule_AddIntConstant(m, "IP_MULTICAST_IF", IP_MULTICAST_IF);
+#endif
+#ifdef IP_MULTICAST_TTL
+ PyModule_AddIntConstant(m, "IP_MULTICAST_TTL", IP_MULTICAST_TTL);
+#endif
+#ifdef IP_MULTICAST_LOOP
+ PyModule_AddIntConstant(m, "IP_MULTICAST_LOOP", IP_MULTICAST_LOOP);
+#endif
+#ifdef IP_ADD_MEMBERSHIP
+ PyModule_AddIntConstant(m, "IP_ADD_MEMBERSHIP", IP_ADD_MEMBERSHIP);
+#endif
+#ifdef IP_DROP_MEMBERSHIP
+ PyModule_AddIntConstant(m, "IP_DROP_MEMBERSHIP", IP_DROP_MEMBERSHIP);
+#endif
+#ifdef IP_DEFAULT_MULTICAST_TTL
+ PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_TTL",
+ IP_DEFAULT_MULTICAST_TTL);
+#endif
+#ifdef IP_DEFAULT_MULTICAST_LOOP
+ PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_LOOP",
+ IP_DEFAULT_MULTICAST_LOOP);
+#endif
+#ifdef IP_MAX_MEMBERSHIPS
+ PyModule_AddIntConstant(m, "IP_MAX_MEMBERSHIPS", IP_MAX_MEMBERSHIPS);
+#endif
+
+ /* IPv6 [gs]etsockopt options, defined in RFC2553 */
+#ifdef IPV6_JOIN_GROUP
+ PyModule_AddIntConstant(m, "IPV6_JOIN_GROUP", IPV6_JOIN_GROUP);
+#endif
+#ifdef IPV6_LEAVE_GROUP
+ PyModule_AddIntConstant(m, "IPV6_LEAVE_GROUP", IPV6_LEAVE_GROUP);
+#endif
+#ifdef IPV6_MULTICAST_HOPS
+ PyModule_AddIntConstant(m, "IPV6_MULTICAST_HOPS", IPV6_MULTICAST_HOPS);
+#endif
+#ifdef IPV6_MULTICAST_IF
+ PyModule_AddIntConstant(m, "IPV6_MULTICAST_IF", IPV6_MULTICAST_IF);
+#endif
+#ifdef IPV6_MULTICAST_LOOP
+ PyModule_AddIntConstant(m, "IPV6_MULTICAST_LOOP", IPV6_MULTICAST_LOOP);
+#endif
+#ifdef IPV6_UNICAST_HOPS
+ PyModule_AddIntConstant(m, "IPV6_UNICAST_HOPS", IPV6_UNICAST_HOPS);
+#endif
+ /* Additional IPV6 socket options, defined in RFC 3493 */
+#ifdef IPV6_V6ONLY
+ PyModule_AddIntConstant(m, "IPV6_V6ONLY", IPV6_V6ONLY);
+#endif
+ /* Advanced IPV6 socket options, from RFC 3542 */
+#ifdef IPV6_CHECKSUM
+ PyModule_AddIntConstant(m, "IPV6_CHECKSUM", IPV6_CHECKSUM);
+#endif
+#ifdef IPV6_DONTFRAG
+ PyModule_AddIntConstant(m, "IPV6_DONTFRAG", IPV6_DONTFRAG);
+#endif
+#ifdef IPV6_DSTOPTS
+ PyModule_AddIntConstant(m, "IPV6_DSTOPTS", IPV6_DSTOPTS);
+#endif
+#ifdef IPV6_HOPLIMIT
+ PyModule_AddIntConstant(m, "IPV6_HOPLIMIT", IPV6_HOPLIMIT);
+#endif
+#ifdef IPV6_HOPOPTS
+ PyModule_AddIntConstant(m, "IPV6_HOPOPTS", IPV6_HOPOPTS);
+#endif
+#ifdef IPV6_NEXTHOP
+ PyModule_AddIntConstant(m, "IPV6_NEXTHOP", IPV6_NEXTHOP);
+#endif
+#ifdef IPV6_PATHMTU
+ PyModule_AddIntConstant(m, "IPV6_PATHMTU", IPV6_PATHMTU);
+#endif
+#ifdef IPV6_PKTINFO
+ PyModule_AddIntConstant(m, "IPV6_PKTINFO", IPV6_PKTINFO);
+#endif
+#ifdef IPV6_RECVDSTOPTS
+ PyModule_AddIntConstant(m, "IPV6_RECVDSTOPTS", IPV6_RECVDSTOPTS);
+#endif
+#ifdef IPV6_RECVHOPLIMIT
+ PyModule_AddIntConstant(m, "IPV6_RECVHOPLIMIT", IPV6_RECVHOPLIMIT);
+#endif
+#ifdef IPV6_RECVHOPOPTS
+ PyModule_AddIntConstant(m, "IPV6_RECVHOPOPTS", IPV6_RECVHOPOPTS);
+#endif
+#ifdef IPV6_RECVPKTINFO
+ PyModule_AddIntConstant(m, "IPV6_RECVPKTINFO", IPV6_RECVPKTINFO);
+#endif
+#ifdef IPV6_RECVRTHDR
+ PyModule_AddIntConstant(m, "IPV6_RECVRTHDR", IPV6_RECVRTHDR);
+#endif
+#ifdef IPV6_RECVTCLASS
+ PyModule_AddIntConstant(m, "IPV6_RECVTCLASS", IPV6_RECVTCLASS);
+#endif
+#ifdef IPV6_RTHDR
+ PyModule_AddIntConstant(m, "IPV6_RTHDR", IPV6_RTHDR);
+#endif
+#ifdef IPV6_RTHDRDSTOPTS
+ PyModule_AddIntConstant(m, "IPV6_RTHDRDSTOPTS", IPV6_RTHDRDSTOPTS);
+#endif
+#ifdef IPV6_RTHDR_TYPE_0
+ PyModule_AddIntConstant(m, "IPV6_RTHDR_TYPE_0", IPV6_RTHDR_TYPE_0);
+#endif
+#ifdef IPV6_RECVPATHMTU
+ PyModule_AddIntConstant(m, "IPV6_RECVPATHMTU", IPV6_RECVPATHMTU);
+#endif
+#ifdef IPV6_TCLASS
+ PyModule_AddIntConstant(m, "IPV6_TCLASS", IPV6_TCLASS);
+#endif
+#ifdef IPV6_USE_MIN_MTU
+ PyModule_AddIntConstant(m, "IPV6_USE_MIN_MTU", IPV6_USE_MIN_MTU);
+#endif
+
+ /* TCP options */
+#ifdef TCP_NODELAY
+ PyModule_AddIntConstant(m, "TCP_NODELAY", TCP_NODELAY);
+#endif
+#ifdef TCP_MAXSEG
+ PyModule_AddIntConstant(m, "TCP_MAXSEG", TCP_MAXSEG);
+#endif
+#ifdef TCP_CORK
+ PyModule_AddIntConstant(m, "TCP_CORK", TCP_CORK);
+#endif
+#ifdef TCP_KEEPIDLE
+ PyModule_AddIntConstant(m, "TCP_KEEPIDLE", TCP_KEEPIDLE);
+#endif
+#ifdef TCP_KEEPINTVL
+ PyModule_AddIntConstant(m, "TCP_KEEPINTVL", TCP_KEEPINTVL);
+#endif
+#ifdef TCP_KEEPCNT
+ PyModule_AddIntConstant(m, "TCP_KEEPCNT", TCP_KEEPCNT);
+#endif
+#ifdef TCP_SYNCNT
+ PyModule_AddIntConstant(m, "TCP_SYNCNT", TCP_SYNCNT);
+#endif
+#ifdef TCP_LINGER2
+ PyModule_AddIntConstant(m, "TCP_LINGER2", TCP_LINGER2);
+#endif
+#ifdef TCP_DEFER_ACCEPT
+ PyModule_AddIntConstant(m, "TCP_DEFER_ACCEPT", TCP_DEFER_ACCEPT);
+#endif
+#ifdef TCP_WINDOW_CLAMP
+ PyModule_AddIntConstant(m, "TCP_WINDOW_CLAMP", TCP_WINDOW_CLAMP);
+#endif
+#ifdef TCP_INFO
+ PyModule_AddIntConstant(m, "TCP_INFO", TCP_INFO);
+#endif
+#ifdef TCP_QUICKACK
+ PyModule_AddIntConstant(m, "TCP_QUICKACK", TCP_QUICKACK);
+#endif
+
+
+ /* IPX options */
+#ifdef IPX_TYPE
+ PyModule_AddIntConstant(m, "IPX_TYPE", IPX_TYPE);
+#endif
+
+ /* get{addr,name}info parameters */
+#ifdef EAI_ADDRFAMILY
+ PyModule_AddIntConstant(m, "EAI_ADDRFAMILY", EAI_ADDRFAMILY);
+#endif
+#ifdef EAI_AGAIN
+ PyModule_AddIntConstant(m, "EAI_AGAIN", EAI_AGAIN);
+#endif
+#ifdef EAI_BADFLAGS
+ PyModule_AddIntConstant(m, "EAI_BADFLAGS", EAI_BADFLAGS);
+#endif
+#ifdef EAI_FAIL
+ PyModule_AddIntConstant(m, "EAI_FAIL", EAI_FAIL);
+#endif
+#ifdef EAI_FAMILY
+ PyModule_AddIntConstant(m, "EAI_FAMILY", EAI_FAMILY);
+#endif
+#ifdef EAI_MEMORY
+ PyModule_AddIntConstant(m, "EAI_MEMORY", EAI_MEMORY);
+#endif
+#ifdef EAI_NODATA
+ PyModule_AddIntConstant(m, "EAI_NODATA", EAI_NODATA);
+#endif
+#ifdef EAI_NONAME
+ PyModule_AddIntConstant(m, "EAI_NONAME", EAI_NONAME);
+#endif
+#ifdef EAI_OVERFLOW
+ PyModule_AddIntConstant(m, "EAI_OVERFLOW", EAI_OVERFLOW);
+#endif
+#ifdef EAI_SERVICE
+ PyModule_AddIntConstant(m, "EAI_SERVICE", EAI_SERVICE);
+#endif
+#ifdef EAI_SOCKTYPE
+ PyModule_AddIntConstant(m, "EAI_SOCKTYPE", EAI_SOCKTYPE);
+#endif
+#ifdef EAI_SYSTEM
+ PyModule_AddIntConstant(m, "EAI_SYSTEM", EAI_SYSTEM);
+#endif
+#ifdef EAI_BADHINTS
+ PyModule_AddIntConstant(m, "EAI_BADHINTS", EAI_BADHINTS);
+#endif
+#ifdef EAI_PROTOCOL
+ PyModule_AddIntConstant(m, "EAI_PROTOCOL", EAI_PROTOCOL);
+#endif
+#ifdef EAI_MAX
+ PyModule_AddIntConstant(m, "EAI_MAX", EAI_MAX);
+#endif
+#ifdef AI_PASSIVE
+ PyModule_AddIntConstant(m, "AI_PASSIVE", AI_PASSIVE);
+#endif
+#ifdef AI_CANONNAME
+ PyModule_AddIntConstant(m, "AI_CANONNAME", AI_CANONNAME);
+#endif
+#ifdef AI_NUMERICHOST
+ PyModule_AddIntConstant(m, "AI_NUMERICHOST", AI_NUMERICHOST);
+#endif
+#ifdef AI_NUMERICSERV
+ PyModule_AddIntConstant(m, "AI_NUMERICSERV", AI_NUMERICSERV);
+#endif
+#ifdef AI_MASK
+ PyModule_AddIntConstant(m, "AI_MASK", AI_MASK);
+#endif
+#ifdef AI_ALL
+ PyModule_AddIntConstant(m, "AI_ALL", AI_ALL);
+#endif
+#ifdef AI_V4MAPPED_CFG
+ PyModule_AddIntConstant(m, "AI_V4MAPPED_CFG", AI_V4MAPPED_CFG);
+#endif
+#ifdef AI_ADDRCONFIG
+ PyModule_AddIntConstant(m, "AI_ADDRCONFIG", AI_ADDRCONFIG);
+#endif
+#ifdef AI_V4MAPPED
+ PyModule_AddIntConstant(m, "AI_V4MAPPED", AI_V4MAPPED);
+#endif
+#ifdef AI_DEFAULT
+ PyModule_AddIntConstant(m, "AI_DEFAULT", AI_DEFAULT);
+#endif
+#ifdef NI_MAXHOST
+ PyModule_AddIntConstant(m, "NI_MAXHOST", NI_MAXHOST);
+#endif
+#ifdef NI_MAXSERV
+ PyModule_AddIntConstant(m, "NI_MAXSERV", NI_MAXSERV);
+#endif
+#ifdef NI_NOFQDN
+ PyModule_AddIntConstant(m, "NI_NOFQDN", NI_NOFQDN);
+#endif
+#ifdef NI_NUMERICHOST
+ PyModule_AddIntConstant(m, "NI_NUMERICHOST", NI_NUMERICHOST);
+#endif
+#ifdef NI_NAMEREQD
+ PyModule_AddIntConstant(m, "NI_NAMEREQD", NI_NAMEREQD);
+#endif
+#ifdef NI_NUMERICSERV
+ PyModule_AddIntConstant(m, "NI_NUMERICSERV", NI_NUMERICSERV);
+#endif
+#ifdef NI_DGRAM
+ PyModule_AddIntConstant(m, "NI_DGRAM", NI_DGRAM);
+#endif
+
+ /* shutdown() parameters */
+#ifdef SHUT_RD
+ PyModule_AddIntConstant(m, "SHUT_RD", SHUT_RD);
+#elif defined(SD_RECEIVE)
+ PyModule_AddIntConstant(m, "SHUT_RD", SD_RECEIVE);
+#else
+ PyModule_AddIntConstant(m, "SHUT_RD", 0);
+#endif
+#ifdef SHUT_WR
+ PyModule_AddIntConstant(m, "SHUT_WR", SHUT_WR);
+#elif defined(SD_SEND)
+ PyModule_AddIntConstant(m, "SHUT_WR", SD_SEND);
+#else
+ PyModule_AddIntConstant(m, "SHUT_WR", 1);
+#endif
+#ifdef SHUT_RDWR
+ PyModule_AddIntConstant(m, "SHUT_RDWR", SHUT_RDWR);
+#elif defined(SD_BOTH)
+ PyModule_AddIntConstant(m, "SHUT_RDWR", SD_BOTH);
+#else
+ PyModule_AddIntConstant(m, "SHUT_RDWR", 2);
+#endif
+
+#ifdef SIO_RCVALL
+ {
+ PyObject *tmp;
+ tmp = PyLong_FromUnsignedLong(SIO_RCVALL);
+ if (tmp == NULL)
+ return;
+ PyModule_AddObject(m, "SIO_RCVALL", tmp);
+ }
+ PyModule_AddIntConstant(m, "RCVALL_OFF", RCVALL_OFF);
+ PyModule_AddIntConstant(m, "RCVALL_ON", RCVALL_ON);
+ PyModule_AddIntConstant(m, "RCVALL_SOCKETLEVELONLY", RCVALL_SOCKETLEVELONLY);
+#ifdef RCVALL_IPLEVEL
+ PyModule_AddIntConstant(m, "RCVALL_IPLEVEL", RCVALL_IPLEVEL);
+#endif
+#ifdef RCVALL_MAX
+ PyModule_AddIntConstant(m, "RCVALL_MAX", RCVALL_MAX);
+#endif
+#endif /* _MSTCPIP_ */
+
+ /* Initialize gethostbyname lock */
+#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
+ netdb_lock = PyThread_allocate_lock();
+#endif
+}
+
+
+#ifndef HAVE_INET_PTON
+#if !defined(NTDDI_VERSION) || (NTDDI_VERSION < NTDDI_LONGHORN)
+
+/* Simplistic emulation code for inet_pton that only works for IPv4 */
+/* These are not exposed because they do not set errno properly */
+
+int
+inet_pton(int af, const char *src, void *dst)
+{
+ if (af == AF_INET) {
+ long packed_addr;
+ packed_addr = inet_addr(src);
+ if (packed_addr == INADDR_NONE)
+ return 0;
+ memcpy(dst, &packed_addr, 4);
+ return 1;
+ }
+ /* Should set errno to EAFNOSUPPORT */
+ return -1;
+}
+
+const char *
+inet_ntop(int af, const void *src, char *dst, socklen_t size)
+{
+ if (af == AF_INET) {
+ struct in_addr packed_addr;
+ if (size < 16)
+ /* Should set errno to ENOSPC. */
+ return NULL;
+ memcpy(&packed_addr, src, sizeof(packed_addr));
+ return strncpy(dst, inet_ntoa(packed_addr), size);
+ }
+ /* Should set errno to EAFNOSUPPORT */
+ return NULL;
+}
+
+#endif
+#endif