--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/disas.c Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,412 @@
+/* General "disassemble this chunk" code. Used for debugging. */
+#include "config.h"
+#include "dis-asm.h"
+#include "elf.h"
+#include <errno.h>
+
+#include "cpu.h"
+#include "exec-all.h"
+#include "disas.h"
+
+/* Filled in by elfload.c. Simplistic, but will do for now. */
+struct syminfo *syminfos = NULL;
+
+/* Get LENGTH bytes from info's buffer, at target address memaddr.
+ Transfer them to myaddr. */
+int
+buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
+ struct disassemble_info *info)
+{
+ if (memaddr < info->buffer_vma
+ || memaddr + length > info->buffer_vma + info->buffer_length)
+ /* Out of bounds. Use EIO because GDB uses it. */
+ return EIO;
+ memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
+ return 0;
+}
+
+/* Get LENGTH bytes from info's buffer, at target address memaddr.
+ Transfer them to myaddr. */
+static int
+target_read_memory (bfd_vma memaddr,
+ bfd_byte *myaddr,
+ int length,
+ struct disassemble_info *info)
+{
+ int i;
+ for(i = 0; i < length; i++) {
+ myaddr[i] = ldub_code(memaddr + i);
+ }
+ return 0;
+}
+
+/* Print an error message. We can assume that this is in response to
+ an error return from buffer_read_memory. */
+void
+perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
+{
+ if (status != EIO)
+ /* Can't happen. */
+ (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
+ else
+ /* Actually, address between memaddr and memaddr + len was
+ out of bounds. */
+ (*info->fprintf_func) (info->stream,
+ "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
+}
+
+/* This could be in a separate file, to save miniscule amounts of space
+ in statically linked executables. */
+
+/* Just print the address is hex. This is included for completeness even
+ though both GDB and objdump provide their own (to print symbolic
+ addresses). */
+
+void
+generic_print_address (bfd_vma addr, struct disassemble_info *info)
+{
+ (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
+}
+
+/* Just return the given address. */
+
+int
+generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
+{
+ return 1;
+}
+
+bfd_vma bfd_getl32 (const bfd_byte *addr)
+{
+ unsigned long v;
+
+ v = (unsigned long) addr[0];
+ v |= (unsigned long) addr[1] << 8;
+ v |= (unsigned long) addr[2] << 16;
+ v |= (unsigned long) addr[3] << 24;
+ return (bfd_vma) v;
+}
+
+bfd_vma bfd_getb32 (const bfd_byte *addr)
+{
+ unsigned long v;
+
+ v = (unsigned long) addr[0] << 24;
+ v |= (unsigned long) addr[1] << 16;
+ v |= (unsigned long) addr[2] << 8;
+ v |= (unsigned long) addr[3];
+ return (bfd_vma) v;
+}
+
+bfd_vma bfd_getl16 (const bfd_byte *addr)
+{
+ unsigned long v;
+
+ v = (unsigned long) addr[0];
+ v |= (unsigned long) addr[1] << 8;
+ return (bfd_vma) v;
+}
+
+bfd_vma bfd_getb16 (const bfd_byte *addr)
+{
+ unsigned long v;
+
+ v = (unsigned long) addr[0] << 24;
+ v |= (unsigned long) addr[1] << 16;
+ return (bfd_vma) v;
+}
+
+#ifdef TARGET_ARM
+static int
+print_insn_thumb1(bfd_vma pc, disassemble_info *info)
+{
+ return print_insn_arm(pc | 1, info);
+}
+#endif
+
+/* Disassemble this for me please... (debugging). 'flags' has the following
+ values:
+ i386 - nonzero means 16 bit code
+ arm - bit 0 = thumb, bit 1 = reverse endian
+ ppc - nonzero means little endian
+ other targets - unused
+ */
+void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
+{
+ target_ulong pc;
+ int count;
+ struct disassemble_info disasm_info;
+ int (*print_insn)(bfd_vma pc, disassemble_info *info);
+
+ INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
+
+ disasm_info.read_memory_func = target_read_memory;
+ disasm_info.buffer_vma = code;
+ disasm_info.buffer_length = size;
+
+#ifdef TARGET_WORDS_BIGENDIAN
+ disasm_info.endian = BFD_ENDIAN_BIG;
+#else
+ disasm_info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(TARGET_I386)
+ if (flags == 2)
+ disasm_info.mach = bfd_mach_x86_64;
+ else if (flags == 1)
+ disasm_info.mach = bfd_mach_i386_i8086;
+ else
+ disasm_info.mach = bfd_mach_i386_i386;
+ print_insn = print_insn_i386;
+#elif defined(TARGET_ARM)
+ if (flags & 1)
+ print_insn = print_insn_thumb1;
+ else
+ print_insn = print_insn_arm;
+ if (flags & 2) {
+#ifdef TARGET_WORDS_BIGENDIAN
+ disasm_info.endian = BFD_ENDIAN_LITTLE;
+#else
+ disasm_info.endian = BFD_ENDIAN_BIG;
+#endif
+ }
+#elif defined(TARGET_SPARC)
+ print_insn = print_insn_sparc;
+#ifdef TARGET_SPARC64
+ disasm_info.mach = bfd_mach_sparc_v9b;
+#endif
+#elif defined(TARGET_PPC)
+ if (flags >> 16)
+ disasm_info.endian = BFD_ENDIAN_LITTLE;
+ if (flags & 0xFFFF) {
+ /* If we have a precise definitions of the instructions set, use it */
+ disasm_info.mach = flags & 0xFFFF;
+ } else {
+#ifdef TARGET_PPC64
+ disasm_info.mach = bfd_mach_ppc64;
+#else
+ disasm_info.mach = bfd_mach_ppc;
+#endif
+ }
+ print_insn = print_insn_ppc;
+#elif defined(TARGET_M68K)
+ print_insn = print_insn_m68k;
+#elif defined(TARGET_MIPS)
+#ifdef TARGET_WORDS_BIGENDIAN
+ print_insn = print_insn_big_mips;
+#else
+ print_insn = print_insn_little_mips;
+#endif
+#elif defined(TARGET_SH4)
+ disasm_info.mach = bfd_mach_sh4;
+ print_insn = print_insn_sh;
+#elif defined(TARGET_ALPHA)
+ disasm_info.mach = bfd_mach_alpha;
+ print_insn = print_insn_alpha;
+#elif defined(TARGET_CRIS)
+ disasm_info.mach = bfd_mach_cris_v32;
+ print_insn = print_insn_crisv32;
+#else
+ fprintf(out, "0x" TARGET_FMT_lx
+ ": Asm output not supported on this arch\n", code);
+ return;
+#endif
+
+ for (pc = code; pc < code + size; pc += count) {
+ fprintf(out, "0x" TARGET_FMT_lx ": ", pc);
+ count = print_insn(pc, &disasm_info);
+#if 0
+ {
+ int i;
+ uint8_t b;
+ fprintf(out, " {");
+ for(i = 0; i < count; i++) {
+ target_read_memory(pc + i, &b, 1, &disasm_info);
+ fprintf(out, " %02x", b);
+ }
+ fprintf(out, " }");
+ }
+#endif
+ fprintf(out, "\n");
+ if (count < 0)
+ break;
+ }
+}
+
+/* Disassemble this for me please... (debugging). */
+void disas(FILE *out, void *code, unsigned long size)
+{
+ unsigned long pc;
+ int count;
+ struct disassemble_info disasm_info;
+ int (*print_insn)(bfd_vma pc, disassemble_info *info);
+
+ INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
+
+ disasm_info.buffer = code;
+ disasm_info.buffer_vma = (unsigned long)code;
+ disasm_info.buffer_length = size;
+
+#ifdef WORDS_BIGENDIAN
+ disasm_info.endian = BFD_ENDIAN_BIG;
+#else
+ disasm_info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(__i386__)
+ disasm_info.mach = bfd_mach_i386_i386;
+ print_insn = print_insn_i386;
+#elif defined(__x86_64__)
+ disasm_info.mach = bfd_mach_x86_64;
+ print_insn = print_insn_i386;
+#elif defined(__powerpc__)
+ print_insn = print_insn_ppc;
+#elif defined(__alpha__)
+ print_insn = print_insn_alpha;
+#elif defined(__sparc__)
+ print_insn = print_insn_sparc;
+#if defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__)
+ disasm_info.mach = bfd_mach_sparc_v9b;
+#endif
+#elif defined(__arm__)
+ print_insn = print_insn_arm;
+#elif defined(__MIPSEB__)
+ print_insn = print_insn_big_mips;
+#elif defined(__MIPSEL__)
+ print_insn = print_insn_little_mips;
+#elif defined(__m68k__)
+ print_insn = print_insn_m68k;
+#elif defined(__s390__)
+ print_insn = print_insn_s390;
+#elif defined(__hppa__)
+ print_insn = print_insn_hppa;
+#else
+ fprintf(out, "0x%lx: Asm output not supported on this arch\n",
+ (long) code);
+ return;
+#endif
+ for (pc = (unsigned long)code; pc < (unsigned long)code + size; pc += count) {
+ fprintf(out, "0x%08lx: ", pc);
+#ifdef __arm__
+ /* since data is included in the code, it is better to
+ display code data too */
+ fprintf(out, "%08x ", (int)bfd_getl32((const bfd_byte *)pc));
+#endif
+ count = print_insn(pc, &disasm_info);
+ fprintf(out, "\n");
+ if (count < 0)
+ break;
+ }
+}
+
+/* Look up symbol for debugging purpose. Returns "" if unknown. */
+const char *lookup_symbol(target_ulong orig_addr)
+{
+ const char *symbol = "";
+ struct syminfo *s;
+
+ for (s = syminfos; s; s = s->next) {
+ symbol = s->lookup_symbol(s, orig_addr);
+ if (symbol[0] != '\0') {
+ break;
+ }
+ }
+
+ return symbol;
+}
+
+#if !defined(CONFIG_USER_ONLY)
+
+void term_vprintf(const char *fmt, va_list ap);
+void term_printf(const char *fmt, ...);
+
+static int monitor_disas_is_physical;
+static CPUState *monitor_disas_env;
+
+static int
+monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
+ struct disassemble_info *info)
+{
+ if (monitor_disas_is_physical) {
+ cpu_physical_memory_rw(memaddr, myaddr, length, 0);
+ } else {
+ cpu_memory_rw_debug(monitor_disas_env, memaddr,myaddr, length, 0);
+ }
+ return 0;
+}
+
+static int monitor_fprintf(FILE *stream, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ term_vprintf(fmt, ap);
+ va_end(ap);
+ return 0;
+}
+
+void monitor_disas(CPUState *env,
+ target_ulong pc, int nb_insn, int is_physical, int flags)
+{
+ int count, i;
+ struct disassemble_info disasm_info;
+ int (*print_insn)(bfd_vma pc, disassemble_info *info);
+
+ INIT_DISASSEMBLE_INFO(disasm_info, NULL, monitor_fprintf);
+
+ monitor_disas_env = env;
+ monitor_disas_is_physical = is_physical;
+ disasm_info.read_memory_func = monitor_read_memory;
+
+ disasm_info.buffer_vma = pc;
+
+#ifdef TARGET_WORDS_BIGENDIAN
+ disasm_info.endian = BFD_ENDIAN_BIG;
+#else
+ disasm_info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(TARGET_I386)
+ if (flags == 2)
+ disasm_info.mach = bfd_mach_x86_64;
+ else if (flags == 1)
+ disasm_info.mach = bfd_mach_i386_i8086;
+ else
+ disasm_info.mach = bfd_mach_i386_i386;
+ print_insn = print_insn_i386;
+#elif defined(TARGET_ARM)
+ print_insn = print_insn_arm;
+#elif defined(TARGET_ALPHA)
+ print_insn = print_insn_alpha;
+#elif defined(TARGET_SPARC)
+ print_insn = print_insn_sparc;
+#ifdef TARGET_SPARC64
+ disasm_info.mach = bfd_mach_sparc_v9b;
+#endif
+#elif defined(TARGET_PPC)
+#ifdef TARGET_PPC64
+ disasm_info.mach = bfd_mach_ppc64;
+#else
+ disasm_info.mach = bfd_mach_ppc;
+#endif
+ print_insn = print_insn_ppc;
+#elif defined(TARGET_M68K)
+ print_insn = print_insn_m68k;
+#elif defined(TARGET_MIPS)
+#ifdef TARGET_WORDS_BIGENDIAN
+ print_insn = print_insn_big_mips;
+#else
+ print_insn = print_insn_little_mips;
+#endif
+#else
+ term_printf("0x" TARGET_FMT_lx
+ ": Asm output not supported on this arch\n", pc);
+ return;
+#endif
+
+ for(i = 0; i < nb_insn; i++) {
+ term_printf("0x" TARGET_FMT_lx ": ", pc);
+ count = print_insn(pc, &disasm_info);
+ term_printf("\n");
+ if (count < 0)
+ break;
+ pc += count;
+ }
+}
+#endif