--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/hw/cbus.c Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,626 @@
+/*
+ * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma /
+ * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms.
+ * Based on reverse-engineering of a linux driver.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "qemu-common.h"
+#include "irq.h"
+#include "devices.h"
+#include "sysemu.h"
+
+//#define DEBUG
+
+struct cbus_slave_s;
+struct cbus_priv_s {
+ struct cbus_s cbus;
+
+ int sel;
+ int dat;
+ int clk;
+ int bit;
+ int dir;
+ uint16_t val;
+ qemu_irq dat_out;
+
+ int addr;
+ int reg;
+ int rw;
+ enum {
+ cbus_address,
+ cbus_value,
+ } cycle;
+
+ struct cbus_slave_s *slave[8];
+};
+
+struct cbus_slave_s {
+ void *opaque;
+ void (*io)(void *opaque, int rw, int reg, uint16_t *val);
+ int addr;
+};
+
+static void cbus_io(struct cbus_priv_s *s)
+{
+ if (s->slave[s->addr])
+ s->slave[s->addr]->io(s->slave[s->addr]->opaque,
+ s->rw, s->reg, &s->val);
+ else
+ cpu_abort(cpu_single_env, "%s: bad slave address %i\n",
+ __FUNCTION__, s->addr);
+}
+
+static void cbus_cycle(struct cbus_priv_s *s)
+{
+ switch (s->cycle) {
+ case cbus_address:
+ s->addr = (s->val >> 6) & 7;
+ s->rw = (s->val >> 5) & 1;
+ s->reg = (s->val >> 0) & 0x1f;
+
+ s->cycle = cbus_value;
+ s->bit = 15;
+ s->dir = !s->rw;
+ s->val = 0;
+
+ if (s->rw)
+ cbus_io(s);
+ break;
+
+ case cbus_value:
+ if (!s->rw)
+ cbus_io(s);
+
+ s->cycle = cbus_address;
+ s->bit = 8;
+ s->dir = 1;
+ s->val = 0;
+ break;
+ }
+}
+
+static void cbus_clk(void *opaque, int line, int level)
+{
+ struct cbus_priv_s *s = (struct cbus_priv_s *) opaque;
+
+ if (!s->sel && level && !s->clk) {
+ if (s->dir)
+ s->val |= s->dat << (s->bit --);
+ else
+ qemu_set_irq(s->dat_out, (s->val >> (s->bit --)) & 1);
+
+ if (s->bit < 0)
+ cbus_cycle(s);
+ }
+
+ s->clk = level;
+}
+
+static void cbus_dat(void *opaque, int line, int level)
+{
+ struct cbus_priv_s *s = (struct cbus_priv_s *) opaque;
+
+ s->dat = level;
+}
+
+static void cbus_sel(void *opaque, int line, int level)
+{
+ struct cbus_priv_s *s = (struct cbus_priv_s *) opaque;
+
+ if (!level) {
+ s->dir = 1;
+ s->bit = 8;
+ s->val = 0;
+ }
+
+ s->sel = level;
+}
+
+struct cbus_s *cbus_init(qemu_irq dat)
+{
+ struct cbus_priv_s *s = (struct cbus_priv_s *) qemu_mallocz(sizeof(*s));
+
+ s->dat_out = dat;
+ s->cbus.clk = qemu_allocate_irqs(cbus_clk, s, 1)[0];
+ s->cbus.dat = qemu_allocate_irqs(cbus_dat, s, 1)[0];
+ s->cbus.sel = qemu_allocate_irqs(cbus_sel, s, 1)[0];
+
+ s->sel = 1;
+ s->clk = 0;
+ s->dat = 0;
+
+ return &s->cbus;
+}
+
+void cbus_attach(struct cbus_s *bus, void *slave_opaque)
+{
+ struct cbus_slave_s *slave = (struct cbus_slave_s *) slave_opaque;
+ struct cbus_priv_s *s = (struct cbus_priv_s *) bus;
+
+ s->slave[slave->addr] = slave;
+}
+
+/* Retu/Vilma */
+struct cbus_retu_s {
+ uint16_t irqst;
+ uint16_t irqen;
+ uint16_t cc[2];
+ int channel;
+ uint16_t result[16];
+ uint16_t sample;
+ uint16_t status;
+
+ struct {
+ uint16_t cal;
+ } rtc;
+
+ int is_vilma;
+ qemu_irq irq;
+ struct cbus_slave_s cbus;
+};
+
+static void retu_interrupt_update(struct cbus_retu_s *s)
+{
+ qemu_set_irq(s->irq, s->irqst & ~s->irqen);
+}
+
+#define RETU_REG_ASICR 0x00 /* (RO) ASIC ID & revision */
+#define RETU_REG_IDR 0x01 /* (T) Interrupt ID */
+#define RETU_REG_IMR 0x02 /* (RW) Interrupt mask */
+#define RETU_REG_RTCDSR 0x03 /* (RW) RTC seconds register */
+#define RETU_REG_RTCHMR 0x04 /* (RO) RTC hours and minutes reg */
+#define RETU_REG_RTCHMAR 0x05 /* (RW) RTC hours and minutes set reg */
+#define RETU_REG_RTCCALR 0x06 /* (RW) RTC calibration register */
+#define RETU_REG_ADCR 0x08 /* (RW) ADC result register */
+#define RETU_REG_ADCSCR 0x09 /* (RW) ADC sample control register */
+#define RETU_REG_AFCR 0x0a /* (RW) AFC register */
+#define RETU_REG_ANTIFR 0x0b /* (RW) AntiF register */
+#define RETU_REG_CALIBR 0x0c /* (RW) CalibR register*/
+#define RETU_REG_CCR1 0x0d /* (RW) Common control register 1 */
+#define RETU_REG_CCR2 0x0e /* (RW) Common control register 2 */
+#define RETU_REG_RCTRL_CLR 0x0f /* (T) Regulator clear register */
+#define RETU_REG_RCTRL_SET 0x10 /* (T) Regulator set register */
+#define RETU_REG_TXCR 0x11 /* (RW) TxC register */
+#define RETU_REG_STATUS 0x16 /* (RO) Status register */
+#define RETU_REG_WATCHDOG 0x17 /* (RW) Watchdog register */
+#define RETU_REG_AUDTXR 0x18 /* (RW) Audio Codec Tx register */
+#define RETU_REG_AUDPAR 0x19 /* (RW) AudioPA register */
+#define RETU_REG_AUDRXR1 0x1a /* (RW) Audio receive register 1 */
+#define RETU_REG_AUDRXR2 0x1b /* (RW) Audio receive register 2 */
+#define RETU_REG_SGR1 0x1c /* (RW) */
+#define RETU_REG_SCR1 0x1d /* (RW) */
+#define RETU_REG_SGR2 0x1e /* (RW) */
+#define RETU_REG_SCR2 0x1f /* (RW) */
+
+/* Retu Interrupt sources */
+enum {
+ retu_int_pwr = 0, /* Power button */
+ retu_int_char = 1, /* Charger */
+ retu_int_rtcs = 2, /* Seconds */
+ retu_int_rtcm = 3, /* Minutes */
+ retu_int_rtcd = 4, /* Days */
+ retu_int_rtca = 5, /* Alarm */
+ retu_int_hook = 6, /* Hook */
+ retu_int_head = 7, /* Headset */
+ retu_int_adcs = 8, /* ADC sample */
+};
+
+/* Retu ADC channel wiring */
+enum {
+ retu_adc_bsi = 1, /* BSI */
+ retu_adc_batt_temp = 2, /* Battery temperature */
+ retu_adc_chg_volt = 3, /* Charger voltage */
+ retu_adc_head_det = 4, /* Headset detection */
+ retu_adc_hook_det = 5, /* Hook detection */
+ retu_adc_rf_gp = 6, /* RF GP */
+ retu_adc_tx_det = 7, /* Wideband Tx detection */
+ retu_adc_batt_volt = 8, /* Battery voltage */
+ retu_adc_sens = 10, /* Light sensor */
+ retu_adc_sens_temp = 11, /* Light sensor temperature */
+ retu_adc_bbatt_volt = 12, /* Backup battery voltage */
+ retu_adc_self_temp = 13, /* RETU temperature */
+};
+
+static inline uint16_t retu_read(struct cbus_retu_s *s, int reg)
+{
+#ifdef DEBUG
+ printf("RETU read at %02x\n", reg);
+#endif
+
+ switch (reg) {
+ case RETU_REG_ASICR:
+ return 0x0215 | (s->is_vilma << 7);
+
+ case RETU_REG_IDR: /* TODO: Or is this ffs(s->irqst)? */
+ return s->irqst;
+
+ case RETU_REG_IMR:
+ return s->irqen;
+
+ case RETU_REG_RTCDSR:
+ case RETU_REG_RTCHMR:
+ case RETU_REG_RTCHMAR:
+ /* TODO */
+ return 0x0000;
+
+ case RETU_REG_RTCCALR:
+ return s->rtc.cal;
+
+ case RETU_REG_ADCR:
+ return (s->channel << 10) | s->result[s->channel];
+ case RETU_REG_ADCSCR:
+ return s->sample;
+
+ case RETU_REG_AFCR:
+ case RETU_REG_ANTIFR:
+ case RETU_REG_CALIBR:
+ /* TODO */
+ return 0x0000;
+
+ case RETU_REG_CCR1:
+ return s->cc[0];
+ case RETU_REG_CCR2:
+ return s->cc[1];
+
+ case RETU_REG_RCTRL_CLR:
+ case RETU_REG_RCTRL_SET:
+ case RETU_REG_TXCR:
+ /* TODO */
+ return 0x0000;
+
+ case RETU_REG_STATUS:
+ return s->status;
+
+ case RETU_REG_WATCHDOG:
+ case RETU_REG_AUDTXR:
+ case RETU_REG_AUDPAR:
+ case RETU_REG_AUDRXR1:
+ case RETU_REG_AUDRXR2:
+ case RETU_REG_SGR1:
+ case RETU_REG_SCR1:
+ case RETU_REG_SGR2:
+ case RETU_REG_SCR2:
+ /* TODO */
+ return 0x0000;
+
+ default:
+ cpu_abort(cpu_single_env, "%s: bad register %02x\n",
+ __FUNCTION__, reg);
+ }
+}
+
+static inline void retu_write(struct cbus_retu_s *s, int reg, uint16_t val)
+{
+#ifdef DEBUG
+ printf("RETU write of %04x at %02x\n", val, reg);
+#endif
+
+ switch (reg) {
+ case RETU_REG_IDR:
+ s->irqst ^= val;
+ retu_interrupt_update(s);
+ break;
+
+ case RETU_REG_IMR:
+ s->irqen = val;
+ retu_interrupt_update(s);
+ break;
+
+ case RETU_REG_RTCDSR:
+ case RETU_REG_RTCHMAR:
+ /* TODO */
+ break;
+
+ case RETU_REG_RTCCALR:
+ s->rtc.cal = val;
+ break;
+
+ case RETU_REG_ADCR:
+ s->channel = (val >> 10) & 0xf;
+ s->irqst |= 1 << retu_int_adcs;
+ retu_interrupt_update(s);
+ break;
+ case RETU_REG_ADCSCR:
+ s->sample &= ~val;
+ break;
+
+ case RETU_REG_AFCR:
+ case RETU_REG_ANTIFR:
+ case RETU_REG_CALIBR:
+
+ case RETU_REG_CCR1:
+ s->cc[0] = val;
+ break;
+ case RETU_REG_CCR2:
+ s->cc[1] = val;
+ break;
+
+ case RETU_REG_RCTRL_CLR:
+ case RETU_REG_RCTRL_SET:
+ /* TODO */
+ break;
+
+ case RETU_REG_WATCHDOG:
+ if (val == 0 && (s->cc[0] & 2))
+ qemu_system_shutdown_request();
+ break;
+
+ case RETU_REG_TXCR:
+ case RETU_REG_AUDTXR:
+ case RETU_REG_AUDPAR:
+ case RETU_REG_AUDRXR1:
+ case RETU_REG_AUDRXR2:
+ case RETU_REG_SGR1:
+ case RETU_REG_SCR1:
+ case RETU_REG_SGR2:
+ case RETU_REG_SCR2:
+ /* TODO */
+ break;
+
+ default:
+ cpu_abort(cpu_single_env, "%s: bad register %02x\n",
+ __FUNCTION__, reg);
+ }
+}
+
+static void retu_io(void *opaque, int rw, int reg, uint16_t *val)
+{
+ struct cbus_retu_s *s = (struct cbus_retu_s *) opaque;
+
+ if (rw)
+ *val = retu_read(s, reg);
+ else
+ retu_write(s, reg, *val);
+}
+
+void *retu_init(qemu_irq irq, int vilma)
+{
+ struct cbus_retu_s *s = (struct cbus_retu_s *) qemu_mallocz(sizeof(*s));
+
+ s->irq = irq;
+ s->irqen = 0xffff;
+ s->irqst = 0x0000;
+ s->status = 0x0020;
+ s->is_vilma = !!vilma;
+ s->rtc.cal = 0x01;
+ s->result[retu_adc_bsi] = 0x3c2;
+ s->result[retu_adc_batt_temp] = 0x0fc;
+ s->result[retu_adc_chg_volt] = 0x165;
+ s->result[retu_adc_head_det] = 123;
+ s->result[retu_adc_hook_det] = 1023;
+ s->result[retu_adc_rf_gp] = 0x11;
+ s->result[retu_adc_tx_det] = 0x11;
+ s->result[retu_adc_batt_volt] = 0x250;
+ s->result[retu_adc_sens] = 2;
+ s->result[retu_adc_sens_temp] = 0x11;
+ s->result[retu_adc_bbatt_volt] = 0x3d0;
+ s->result[retu_adc_self_temp] = 0x330;
+
+ s->cbus.opaque = s;
+ s->cbus.io = retu_io;
+ s->cbus.addr = 1;
+
+ return &s->cbus;
+}
+
+void retu_key_event(void *retu, int state)
+{
+ struct cbus_slave_s *slave = (struct cbus_slave_s *) retu;
+ struct cbus_retu_s *s = (struct cbus_retu_s *) slave->opaque;
+
+ s->irqst |= 1 << retu_int_pwr;
+ retu_interrupt_update(s);
+
+ if (state)
+ s->status &= ~(1 << 5);
+ else
+ s->status |= 1 << 5;
+}
+
+#if 0
+static void retu_head_event(void *retu, int state)
+{
+ struct cbus_slave_s *slave = (struct cbus_slave_s *) retu;
+ struct cbus_retu_s *s = (struct cbus_retu_s *) slave->opaque;
+
+ if ((s->cc[0] & 0x500) == 0x500) { /* TODO: Which bits? */
+ /* TODO: reissue the interrupt every 100ms or so. */
+ s->irqst |= 1 << retu_int_head;
+ retu_interrupt_update(s);
+ }
+
+ if (state)
+ s->result[retu_adc_head_det] = 50;
+ else
+ s->result[retu_adc_head_det] = 123;
+}
+
+static void retu_hook_event(void *retu, int state)
+{
+ struct cbus_slave_s *slave = (struct cbus_slave_s *) retu;
+ struct cbus_retu_s *s = (struct cbus_retu_s *) slave->opaque;
+
+ if ((s->cc[0] & 0x500) == 0x500) {
+ /* TODO: reissue the interrupt every 100ms or so. */
+ s->irqst |= 1 << retu_int_hook;
+ retu_interrupt_update(s);
+ }
+
+ if (state)
+ s->result[retu_adc_hook_det] = 50;
+ else
+ s->result[retu_adc_hook_det] = 123;
+}
+#endif
+
+/* Tahvo/Betty */
+struct cbus_tahvo_s {
+ uint16_t irqst;
+ uint16_t irqen;
+ uint8_t charger;
+ uint8_t backlight;
+ uint16_t usbr;
+ uint16_t power;
+
+ int is_betty;
+ qemu_irq irq;
+ struct cbus_slave_s cbus;
+};
+
+static void tahvo_interrupt_update(struct cbus_tahvo_s *s)
+{
+ qemu_set_irq(s->irq, s->irqst & ~s->irqen);
+}
+
+#define TAHVO_REG_ASICR 0x00 /* (RO) ASIC ID & revision */
+#define TAHVO_REG_IDR 0x01 /* (T) Interrupt ID */
+#define TAHVO_REG_IDSR 0x02 /* (RO) Interrupt status */
+#define TAHVO_REG_IMR 0x03 /* (RW) Interrupt mask */
+#define TAHVO_REG_CHAPWMR 0x04 /* (RW) Charger PWM */
+#define TAHVO_REG_LEDPWMR 0x05 /* (RW) LED PWM */
+#define TAHVO_REG_USBR 0x06 /* (RW) USB control */
+#define TAHVO_REG_RCR 0x07 /* (RW) Some kind of power management */
+#define TAHVO_REG_CCR1 0x08 /* (RW) Common control register 1 */
+#define TAHVO_REG_CCR2 0x09 /* (RW) Common control register 2 */
+#define TAHVO_REG_TESTR1 0x0a /* (RW) Test register 1 */
+#define TAHVO_REG_TESTR2 0x0b /* (RW) Test register 2 */
+#define TAHVO_REG_NOPR 0x0c /* (RW) Number of periods */
+#define TAHVO_REG_FRR 0x0d /* (RO) FR */
+
+static inline uint16_t tahvo_read(struct cbus_tahvo_s *s, int reg)
+{
+#ifdef DEBUG
+ printf("TAHVO read at %02x\n", reg);
+#endif
+
+ switch (reg) {
+ case TAHVO_REG_ASICR:
+ return 0x0021 | (s->is_betty ? 0x0b00 : 0x0300); /* 22 in N810 */
+
+ case TAHVO_REG_IDR:
+ case TAHVO_REG_IDSR: /* XXX: what does this do? */
+ return s->irqst;
+
+ case TAHVO_REG_IMR:
+ return s->irqen;
+
+ case TAHVO_REG_CHAPWMR:
+ return s->charger;
+
+ case TAHVO_REG_LEDPWMR:
+ return s->backlight;
+
+ case TAHVO_REG_USBR:
+ return s->usbr;
+
+ case TAHVO_REG_RCR:
+ return s->power;
+
+ case TAHVO_REG_CCR1:
+ case TAHVO_REG_CCR2:
+ case TAHVO_REG_TESTR1:
+ case TAHVO_REG_TESTR2:
+ case TAHVO_REG_NOPR:
+ case TAHVO_REG_FRR:
+ return 0x0000;
+
+ default:
+ cpu_abort(cpu_single_env, "%s: bad register %02x\n",
+ __FUNCTION__, reg);
+ }
+}
+
+static inline void tahvo_write(struct cbus_tahvo_s *s, int reg, uint16_t val)
+{
+#ifdef DEBUG
+ printf("TAHVO write of %04x at %02x\n", val, reg);
+#endif
+
+ switch (reg) {
+ case TAHVO_REG_IDR:
+ s->irqst ^= val;
+ tahvo_interrupt_update(s);
+ break;
+
+ case TAHVO_REG_IMR:
+ s->irqen = val;
+ tahvo_interrupt_update(s);
+ break;
+
+ case TAHVO_REG_CHAPWMR:
+ s->charger = val;
+ break;
+
+ case TAHVO_REG_LEDPWMR:
+ if (s->backlight != (val & 0x7f)) {
+ s->backlight = val & 0x7f;
+ printf("%s: LCD backlight now at %i / 127\n",
+ __FUNCTION__, s->backlight);
+ }
+ break;
+
+ case TAHVO_REG_USBR:
+ s->usbr = val;
+ break;
+
+ case TAHVO_REG_RCR:
+ s->power = val;
+ break;
+
+ case TAHVO_REG_CCR1:
+ case TAHVO_REG_CCR2:
+ case TAHVO_REG_TESTR1:
+ case TAHVO_REG_TESTR2:
+ case TAHVO_REG_NOPR:
+ case TAHVO_REG_FRR:
+ break;
+
+ default:
+ cpu_abort(cpu_single_env, "%s: bad register %02x\n",
+ __FUNCTION__, reg);
+ }
+}
+
+static void tahvo_io(void *opaque, int rw, int reg, uint16_t *val)
+{
+ struct cbus_tahvo_s *s = (struct cbus_tahvo_s *) opaque;
+
+ if (rw)
+ *val = tahvo_read(s, reg);
+ else
+ tahvo_write(s, reg, *val);
+}
+
+void *tahvo_init(qemu_irq irq, int betty)
+{
+ struct cbus_tahvo_s *s = (struct cbus_tahvo_s *) qemu_mallocz(sizeof(*s));
+
+ s->irq = irq;
+ s->irqen = 0xffff;
+ s->irqst = 0x0000;
+ s->is_betty = !!betty;
+
+ s->cbus.opaque = s;
+ s->cbus.io = tahvo_io;
+ s->cbus.addr = 2;
+
+ return &s->cbus;
+}