--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/usb-linux.c Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,1698 @@
+/*
+ * Linux host USB redirector
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ * Support for host device auto connect & disconnect
+ * Major rewrite to support fully async operation
+ *
+ * Copyright 2008 TJ <linux@tjworld.net>
+ * Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
+ * to the legacy /proc/bus/usb USB device discovery and handling
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "console.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+
+#include <linux/usbdevice_fs.h>
+#include <linux/version.h>
+#include "hw/usb.h"
+
+/* We redefine it to avoid version problems */
+struct usb_ctrltransfer {
+ uint8_t bRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+ uint32_t timeout;
+ void *data;
+};
+
+struct usb_ctrlrequest {
+ uint8_t bRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+};
+
+typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id,
+ int vendor_id, int product_id,
+ const char *product_name, int speed);
+static int usb_host_find_device(int *pbus_num, int *paddr,
+ char *product_name, int product_name_size,
+ const char *devname);
+//#define DEBUG
+
+#ifdef DEBUG
+#define dprintf printf
+#else
+#define dprintf(...)
+#endif
+
+#define USBDBG_DEVOPENED "husb: opened %s/devices\n"
+
+#define USBPROCBUS_PATH "/proc/bus/usb"
+#define PRODUCT_NAME_SZ 32
+#define MAX_ENDPOINTS 16
+#define USBDEVBUS_PATH "/dev/bus/usb"
+#define USBSYSBUS_PATH "/sys/bus/usb"
+
+static char *usb_host_device_path;
+
+#define USB_FS_NONE 0
+#define USB_FS_PROC 1
+#define USB_FS_DEV 2
+#define USB_FS_SYS 3
+
+static int usb_fs_type;
+
+/* endpoint association data */
+struct endp_data {
+ uint8_t type;
+ uint8_t halted;
+};
+
+enum {
+ CTRL_STATE_IDLE = 0,
+ CTRL_STATE_SETUP,
+ CTRL_STATE_DATA,
+ CTRL_STATE_ACK
+};
+
+/*
+ * Control transfer state.
+ * Note that 'buffer' _must_ follow 'req' field because
+ * we need contigious buffer when we submit control URB.
+ */
+struct ctrl_struct {
+ uint16_t len;
+ uint16_t offset;
+ uint8_t state;
+ struct usb_ctrlrequest req;
+ uint8_t buffer[1024];
+};
+
+typedef struct USBHostDevice {
+ USBDevice dev;
+ int fd;
+
+ uint8_t descr[1024];
+ int descr_len;
+ int configuration;
+ int ninterfaces;
+ int closing;
+
+ struct ctrl_struct ctrl;
+ struct endp_data endp_table[MAX_ENDPOINTS];
+
+ /* Host side address */
+ int bus_num;
+ int addr;
+
+ struct USBHostDevice *next;
+} USBHostDevice;
+
+static int is_isoc(USBHostDevice *s, int ep)
+{
+ return s->endp_table[ep - 1].type == USBDEVFS_URB_TYPE_ISO;
+}
+
+static int is_halted(USBHostDevice *s, int ep)
+{
+ return s->endp_table[ep - 1].halted;
+}
+
+static void clear_halt(USBHostDevice *s, int ep)
+{
+ s->endp_table[ep - 1].halted = 0;
+}
+
+static void set_halt(USBHostDevice *s, int ep)
+{
+ s->endp_table[ep - 1].halted = 1;
+}
+
+static USBHostDevice *hostdev_list;
+
+static void hostdev_link(USBHostDevice *dev)
+{
+ dev->next = hostdev_list;
+ hostdev_list = dev;
+}
+
+static void hostdev_unlink(USBHostDevice *dev)
+{
+ USBHostDevice *pdev = hostdev_list;
+ USBHostDevice **prev = &hostdev_list;
+
+ while (pdev) {
+ if (pdev == dev) {
+ *prev = dev->next;
+ return;
+ }
+
+ prev = &pdev->next;
+ pdev = pdev->next;
+ }
+}
+
+static USBHostDevice *hostdev_find(int bus_num, int addr)
+{
+ USBHostDevice *s = hostdev_list;
+ while (s) {
+ if (s->bus_num == bus_num && s->addr == addr)
+ return s;
+ s = s->next;
+ }
+ return NULL;
+}
+
+/*
+ * Async URB state.
+ * We always allocate one isoc descriptor even for bulk transfers
+ * to simplify allocation and casts.
+ */
+typedef struct AsyncURB
+{
+ struct usbdevfs_urb urb;
+ struct usbdevfs_iso_packet_desc isocpd;
+
+ USBPacket *packet;
+ USBHostDevice *hdev;
+} AsyncURB;
+
+static AsyncURB *async_alloc(void)
+{
+ return (AsyncURB *) qemu_mallocz(sizeof(AsyncURB));
+}
+
+static void async_free(AsyncURB *aurb)
+{
+ qemu_free(aurb);
+}
+
+static void async_complete_ctrl(USBHostDevice *s, USBPacket *p)
+{
+ switch(s->ctrl.state) {
+ case CTRL_STATE_SETUP:
+ if (p->len < s->ctrl.len)
+ s->ctrl.len = p->len;
+ s->ctrl.state = CTRL_STATE_DATA;
+ p->len = 8;
+ break;
+
+ case CTRL_STATE_ACK:
+ s->ctrl.state = CTRL_STATE_IDLE;
+ p->len = 0;
+ break;
+
+ default:
+ break;
+ }
+}
+
+static void async_complete(void *opaque)
+{
+ USBHostDevice *s = opaque;
+ AsyncURB *aurb;
+
+ while (1) {
+ USBPacket *p;
+
+ int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb);
+ if (r < 0) {
+ if (errno == EAGAIN)
+ return;
+
+ if (errno == ENODEV && !s->closing) {
+ printf("husb: device %d.%d disconnected\n", s->bus_num, s->addr);
+ usb_device_del_addr(0, s->dev.addr);
+ return;
+ }
+
+ dprintf("husb: async. reap urb failed errno %d\n", errno);
+ return;
+ }
+
+ p = aurb->packet;
+
+ dprintf("husb: async completed. aurb %p status %d alen %d\n",
+ aurb, aurb->urb.status, aurb->urb.actual_length);
+
+ if (p) {
+ switch (aurb->urb.status) {
+ case 0:
+ p->len = aurb->urb.actual_length;
+ if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL)
+ async_complete_ctrl(s, p);
+ break;
+
+ case -EPIPE:
+ set_halt(s, p->devep);
+ /* fall through */
+ default:
+ p->len = USB_RET_NAK;
+ break;
+ }
+
+ usb_packet_complete(p);
+ }
+
+ async_free(aurb);
+ }
+}
+
+static void async_cancel(USBPacket *unused, void *opaque)
+{
+ AsyncURB *aurb = opaque;
+ USBHostDevice *s = aurb->hdev;
+
+ dprintf("husb: async cancel. aurb %p\n", aurb);
+
+ /* Mark it as dead (see async_complete above) */
+ aurb->packet = NULL;
+
+ int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb);
+ if (r < 0) {
+ dprintf("husb: async. discard urb failed errno %d\n", errno);
+ }
+}
+
+static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
+{
+ int dev_descr_len, config_descr_len;
+ int interface, nb_interfaces, nb_configurations;
+ int ret, i;
+
+ if (configuration == 0) /* address state - ignore */
+ return 1;
+
+ dprintf("husb: claiming interfaces. config %d\n", configuration);
+
+ i = 0;
+ dev_descr_len = dev->descr[0];
+ if (dev_descr_len > dev->descr_len)
+ goto fail;
+ nb_configurations = dev->descr[17];
+
+ i += dev_descr_len;
+ while (i < dev->descr_len) {
+ dprintf("husb: i is %d, descr_len is %d, dl %d, dt %d\n", i, dev->descr_len,
+ dev->descr[i], dev->descr[i+1]);
+
+ if (dev->descr[i+1] != USB_DT_CONFIG) {
+ i += dev->descr[i];
+ continue;
+ }
+ config_descr_len = dev->descr[i];
+
+ printf("husb: config #%d need %d\n", dev->descr[i + 5], configuration);
+
+ if (configuration < 0 || configuration == dev->descr[i + 5]) {
+ configuration = dev->descr[i + 5];
+ break;
+ }
+
+ i += config_descr_len;
+ }
+
+ if (i >= dev->descr_len) {
+ fprintf(stderr, "husb: update iface failed. no matching configuration\n");
+ goto fail;
+ }
+ nb_interfaces = dev->descr[i + 4];
+
+#ifdef USBDEVFS_DISCONNECT
+ /* earlier Linux 2.4 do not support that */
+ {
+ struct usbdevfs_ioctl ctrl;
+ for (interface = 0; interface < nb_interfaces; interface++) {
+ ctrl.ioctl_code = USBDEVFS_DISCONNECT;
+ ctrl.ifno = interface;
+ ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl);
+ if (ret < 0 && errno != ENODATA) {
+ perror("USBDEVFS_DISCONNECT");
+ goto fail;
+ }
+ }
+ }
+#endif
+
+ /* XXX: only grab if all interfaces are free */
+ for (interface = 0; interface < nb_interfaces; interface++) {
+ ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface);
+ if (ret < 0) {
+ if (errno == EBUSY) {
+ printf("husb: update iface. device already grabbed\n");
+ } else {
+ perror("husb: failed to claim interface");
+ }
+ fail:
+ return 0;
+ }
+ }
+
+ printf("husb: %d interfaces claimed for configuration %d\n",
+ nb_interfaces, configuration);
+
+ dev->ninterfaces = nb_interfaces;
+ dev->configuration = configuration;
+ return 1;
+}
+
+static int usb_host_release_interfaces(USBHostDevice *s)
+{
+ int ret, i;
+
+ dprintf("husb: releasing interfaces\n");
+
+ for (i = 0; i < s->ninterfaces; i++) {
+ ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i);
+ if (ret < 0) {
+ perror("husb: failed to release interface");
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void usb_host_handle_reset(USBDevice *dev)
+{
+ USBHostDevice *s = (USBHostDevice *) dev;
+
+ dprintf("husb: reset device %u.%u\n", s->bus_num, s->addr);
+
+ ioctl(s->fd, USBDEVFS_RESET);
+
+ usb_host_claim_interfaces(s, s->configuration);
+}
+
+static void usb_host_handle_destroy(USBDevice *dev)
+{
+ USBHostDevice *s = (USBHostDevice *)dev;
+
+ s->closing = 1;
+
+ qemu_set_fd_handler(s->fd, NULL, NULL, NULL);
+
+ hostdev_unlink(s);
+
+ async_complete(s);
+
+ if (s->fd >= 0)
+ close(s->fd);
+
+ qemu_free(s);
+}
+
+static int usb_linux_update_endp_table(USBHostDevice *s);
+
+static int usb_host_handle_data(USBHostDevice *s, USBPacket *p)
+{
+ struct usbdevfs_urb *urb;
+ AsyncURB *aurb;
+ int ret;
+
+ aurb = async_alloc();
+ if (!aurb) {
+ dprintf("husb: async malloc failed\n");
+ return USB_RET_NAK;
+ }
+ aurb->hdev = s;
+ aurb->packet = p;
+
+ urb = &aurb->urb;
+
+ if (p->pid == USB_TOKEN_IN)
+ urb->endpoint = p->devep | 0x80;
+ else
+ urb->endpoint = p->devep;
+
+ if (is_halted(s, p->devep)) {
+ ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &urb->endpoint);
+ if (ret < 0) {
+ dprintf("husb: failed to clear halt. ep 0x%x errno %d\n",
+ urb->endpoint, errno);
+ return USB_RET_NAK;
+ }
+ clear_halt(s, p->devep);
+ }
+
+ urb->buffer = p->data;
+ urb->buffer_length = p->len;
+
+ if (is_isoc(s, p->devep)) {
+ /* Setup ISOC transfer */
+ urb->type = USBDEVFS_URB_TYPE_ISO;
+ urb->flags = USBDEVFS_URB_ISO_ASAP;
+ urb->number_of_packets = 1;
+ urb->iso_frame_desc[0].length = p->len;
+ } else {
+ /* Setup bulk transfer */
+ urb->type = USBDEVFS_URB_TYPE_BULK;
+ }
+
+ urb->usercontext = s;
+
+ ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+ dprintf("husb: data submit. ep 0x%x len %u aurb %p\n", urb->endpoint, p->len, aurb);
+
+ if (ret < 0) {
+ dprintf("husb: submit failed. errno %d\n", errno);
+ async_free(aurb);
+
+ switch(errno) {
+ case ETIMEDOUT:
+ return USB_RET_NAK;
+ case EPIPE:
+ default:
+ return USB_RET_STALL;
+ }
+ }
+
+ usb_defer_packet(p, async_cancel, aurb);
+ return USB_RET_ASYNC;
+}
+
+static int ctrl_error(void)
+{
+ if (errno == ETIMEDOUT)
+ return USB_RET_NAK;
+ else
+ return USB_RET_STALL;
+}
+
+static int usb_host_set_address(USBHostDevice *s, int addr)
+{
+ dprintf("husb: ctrl set addr %u\n", addr);
+ s->dev.addr = addr;
+ return 0;
+}
+
+static int usb_host_set_config(USBHostDevice *s, int config)
+{
+ usb_host_release_interfaces(s);
+
+ int ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config);
+
+ dprintf("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno);
+
+ if (ret < 0)
+ return ctrl_error();
+
+ usb_host_claim_interfaces(s, config);
+ return 0;
+}
+
+static int usb_host_set_interface(USBHostDevice *s, int iface, int alt)
+{
+ struct usbdevfs_setinterface si;
+ int ret;
+
+ si.interface = iface;
+ si.altsetting = alt;
+ ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si);
+
+ dprintf("husb: ctrl set iface %d altset %d ret %d errno %d\n",
+ iface, alt, ret, errno);
+
+ if (ret < 0)
+ return ctrl_error();
+
+ usb_linux_update_endp_table(s);
+ return 0;
+}
+
+static int usb_host_handle_control(USBHostDevice *s, USBPacket *p)
+{
+ struct usbdevfs_urb *urb;
+ AsyncURB *aurb;
+ int ret, value, index;
+
+ /*
+ * Process certain standard device requests.
+ * These are infrequent and are processed synchronously.
+ */
+ value = le16_to_cpu(s->ctrl.req.wValue);
+ index = le16_to_cpu(s->ctrl.req.wIndex);
+
+ dprintf("husb: ctrl type 0x%x req 0x%x val 0x%x index %u len %u\n",
+ s->ctrl.req.bRequestType, s->ctrl.req.bRequest, value, index,
+ s->ctrl.len);
+
+ if (s->ctrl.req.bRequestType == 0) {
+ switch (s->ctrl.req.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ return usb_host_set_address(s, value);
+
+ case USB_REQ_SET_CONFIGURATION:
+ return usb_host_set_config(s, value & 0xff);
+ }
+ }
+
+ if (s->ctrl.req.bRequestType == 1 &&
+ s->ctrl.req.bRequest == USB_REQ_SET_INTERFACE)
+ return usb_host_set_interface(s, index, value);
+
+ /* The rest are asynchronous */
+
+ aurb = async_alloc();
+ if (!aurb) {
+ dprintf("husb: async malloc failed\n");
+ return USB_RET_NAK;
+ }
+ aurb->hdev = s;
+ aurb->packet = p;
+
+ /*
+ * Setup ctrl transfer.
+ *
+ * s->ctrl is layed out such that data buffer immediately follows
+ * 'req' struct which is exactly what usbdevfs expects.
+ */
+ urb = &aurb->urb;
+
+ urb->type = USBDEVFS_URB_TYPE_CONTROL;
+ urb->endpoint = p->devep;
+
+ urb->buffer = &s->ctrl.req;
+ urb->buffer_length = 8 + s->ctrl.len;
+
+ urb->usercontext = s;
+
+ ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+ dprintf("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb);
+
+ if (ret < 0) {
+ dprintf("husb: submit failed. errno %d\n", errno);
+ async_free(aurb);
+
+ switch(errno) {
+ case ETIMEDOUT:
+ return USB_RET_NAK;
+ case EPIPE:
+ default:
+ return USB_RET_STALL;
+ }
+ }
+
+ usb_defer_packet(p, async_cancel, aurb);
+ return USB_RET_ASYNC;
+}
+
+static int do_token_setup(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = (USBHostDevice *) dev;
+ int ret = 0;
+
+ if (p->len != 8)
+ return USB_RET_STALL;
+
+ memcpy(&s->ctrl.req, p->data, 8);
+ s->ctrl.len = le16_to_cpu(s->ctrl.req.wLength);
+ s->ctrl.offset = 0;
+ s->ctrl.state = CTRL_STATE_SETUP;
+
+ if (s->ctrl.req.bRequestType & USB_DIR_IN) {
+ ret = usb_host_handle_control(s, p);
+ if (ret < 0)
+ return ret;
+
+ if (ret < s->ctrl.len)
+ s->ctrl.len = ret;
+ s->ctrl.state = CTRL_STATE_DATA;
+ } else {
+ if (s->ctrl.len == 0)
+ s->ctrl.state = CTRL_STATE_ACK;
+ else
+ s->ctrl.state = CTRL_STATE_DATA;
+ }
+
+ return ret;
+}
+
+static int do_token_in(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = (USBHostDevice *) dev;
+ int ret = 0;
+
+ if (p->devep != 0)
+ return usb_host_handle_data(s, p);
+
+ switch(s->ctrl.state) {
+ case CTRL_STATE_ACK:
+ if (!(s->ctrl.req.bRequestType & USB_DIR_IN)) {
+ ret = usb_host_handle_control(s, p);
+ if (ret == USB_RET_ASYNC)
+ return USB_RET_ASYNC;
+
+ s->ctrl.state = CTRL_STATE_IDLE;
+ return ret > 0 ? 0 : ret;
+ }
+
+ return 0;
+
+ case CTRL_STATE_DATA:
+ if (s->ctrl.req.bRequestType & USB_DIR_IN) {
+ int len = s->ctrl.len - s->ctrl.offset;
+ if (len > p->len)
+ len = p->len;
+ memcpy(p->data, s->ctrl.buffer + s->ctrl.offset, len);
+ s->ctrl.offset += len;
+ if (s->ctrl.offset >= s->ctrl.len)
+ s->ctrl.state = CTRL_STATE_ACK;
+ return len;
+ }
+
+ s->ctrl.state = CTRL_STATE_IDLE;
+ return USB_RET_STALL;
+
+ default:
+ return USB_RET_STALL;
+ }
+}
+
+static int do_token_out(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = (USBHostDevice *) dev;
+
+ if (p->devep != 0)
+ return usb_host_handle_data(s, p);
+
+ switch(s->ctrl.state) {
+ case CTRL_STATE_ACK:
+ if (s->ctrl.req.bRequestType & USB_DIR_IN) {
+ s->ctrl.state = CTRL_STATE_IDLE;
+ /* transfer OK */
+ } else {
+ /* ignore additional output */
+ }
+ return 0;
+
+ case CTRL_STATE_DATA:
+ if (!(s->ctrl.req.bRequestType & USB_DIR_IN)) {
+ int len = s->ctrl.len - s->ctrl.offset;
+ if (len > p->len)
+ len = p->len;
+ memcpy(s->ctrl.buffer + s->ctrl.offset, p->data, len);
+ s->ctrl.offset += len;
+ if (s->ctrl.offset >= s->ctrl.len)
+ s->ctrl.state = CTRL_STATE_ACK;
+ return len;
+ }
+
+ s->ctrl.state = CTRL_STATE_IDLE;
+ return USB_RET_STALL;
+
+ default:
+ return USB_RET_STALL;
+ }
+}
+
+/*
+ * Packet handler.
+ * Called by the HC (host controller).
+ *
+ * Returns length of the transaction or one of the USB_RET_XXX codes.
+ */
+static int usb_host_handle_packet(USBDevice *s, USBPacket *p)
+{
+ switch(p->pid) {
+ case USB_MSG_ATTACH:
+ s->state = USB_STATE_ATTACHED;
+ return 0;
+
+ case USB_MSG_DETACH:
+ s->state = USB_STATE_NOTATTACHED;
+ return 0;
+
+ case USB_MSG_RESET:
+ s->remote_wakeup = 0;
+ s->addr = 0;
+ s->state = USB_STATE_DEFAULT;
+ s->handle_reset(s);
+ return 0;
+ }
+
+ /* Rest of the PIDs must match our address */
+ if (s->state < USB_STATE_DEFAULT || p->devaddr != s->addr)
+ return USB_RET_NODEV;
+
+ switch (p->pid) {
+ case USB_TOKEN_SETUP:
+ return do_token_setup(s, p);
+
+ case USB_TOKEN_IN:
+ return do_token_in(s, p);
+
+ case USB_TOKEN_OUT:
+ return do_token_out(s, p);
+
+ default:
+ return USB_RET_STALL;
+ }
+}
+
+/* returns 1 on problem encountered or 0 for success */
+static int usb_linux_update_endp_table(USBHostDevice *s)
+{
+ uint8_t *descriptors;
+ uint8_t devep, type, configuration, alt_interface;
+ struct usb_ctrltransfer ct;
+ int interface, ret, length, i;
+
+ ct.bRequestType = USB_DIR_IN;
+ ct.bRequest = USB_REQ_GET_CONFIGURATION;
+ ct.wValue = 0;
+ ct.wIndex = 0;
+ ct.wLength = 1;
+ ct.data = &configuration;
+ ct.timeout = 50;
+
+ ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct);
+ if (ret < 0) {
+ perror("usb_linux_update_endp_table");
+ return 1;
+ }
+
+ /* in address state */
+ if (configuration == 0)
+ return 1;
+
+ /* get the desired configuration, interface, and endpoint descriptors
+ * from device description */
+ descriptors = &s->descr[18];
+ length = s->descr_len - 18;
+ i = 0;
+
+ if (descriptors[i + 1] != USB_DT_CONFIG ||
+ descriptors[i + 5] != configuration) {
+ dprintf("invalid descriptor data - configuration\n");
+ return 1;
+ }
+ i += descriptors[i];
+
+ while (i < length) {
+ if (descriptors[i + 1] != USB_DT_INTERFACE ||
+ (descriptors[i + 1] == USB_DT_INTERFACE &&
+ descriptors[i + 4] == 0)) {
+ i += descriptors[i];
+ continue;
+ }
+
+ interface = descriptors[i + 2];
+
+ ct.bRequestType = USB_DIR_IN | USB_RECIP_INTERFACE;
+ ct.bRequest = USB_REQ_GET_INTERFACE;
+ ct.wValue = 0;
+ ct.wIndex = interface;
+ ct.wLength = 1;
+ ct.data = &alt_interface;
+ ct.timeout = 50;
+
+ ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct);
+ if (ret < 0) {
+ perror("usb_linux_update_endp_table");
+ return 1;
+ }
+
+ /* the current interface descriptor is the active interface
+ * and has endpoints */
+ if (descriptors[i + 3] != alt_interface) {
+ i += descriptors[i];
+ continue;
+ }
+
+ /* advance to the endpoints */
+ while (i < length && descriptors[i +1] != USB_DT_ENDPOINT)
+ i += descriptors[i];
+
+ if (i >= length)
+ break;
+
+ while (i < length) {
+ if (descriptors[i + 1] != USB_DT_ENDPOINT)
+ break;
+
+ devep = descriptors[i + 2];
+ switch (descriptors[i + 3] & 0x3) {
+ case 0x00:
+ type = USBDEVFS_URB_TYPE_CONTROL;
+ break;
+ case 0x01:
+ type = USBDEVFS_URB_TYPE_ISO;
+ break;
+ case 0x02:
+ type = USBDEVFS_URB_TYPE_BULK;
+ break;
+ case 0x03:
+ type = USBDEVFS_URB_TYPE_INTERRUPT;
+ break;
+ default:
+ dprintf("usb_host: malformed endpoint type\n");
+ type = USBDEVFS_URB_TYPE_BULK;
+ }
+ s->endp_table[(devep & 0xf) - 1].type = type;
+ s->endp_table[(devep & 0xf) - 1].halted = 0;
+
+ i += descriptors[i];
+ }
+ }
+ return 0;
+}
+
+static USBDevice *usb_host_device_open_addr(int bus_num, int addr, const char *prod_name)
+{
+ int fd = -1, ret;
+ USBHostDevice *dev = NULL;
+ struct usbdevfs_connectinfo ci;
+ char buf[1024];
+
+ dev = qemu_mallocz(sizeof(USBHostDevice));
+ if (!dev)
+ goto fail;
+
+ dev->bus_num = bus_num;
+ dev->addr = addr;
+
+ printf("husb: open device %d.%d\n", bus_num, addr);
+
+ if (!usb_host_device_path) {
+ perror("husb: USB Host Device Path not set");
+ goto fail;
+ }
+ snprintf(buf, sizeof(buf), "%s/%03d/%03d", usb_host_device_path,
+ bus_num, addr);
+ fd = open(buf, O_RDWR | O_NONBLOCK);
+ if (fd < 0) {
+ perror(buf);
+ goto fail;
+ }
+ dprintf("husb: opened %s\n", buf);
+
+ /* read the device description */
+ dev->descr_len = read(fd, dev->descr, sizeof(dev->descr));
+ if (dev->descr_len <= 0) {
+ perror("husb: reading device data failed");
+ goto fail;
+ }
+
+#ifdef DEBUG
+ {
+ int x;
+ printf("=== begin dumping device descriptor data ===\n");
+ for (x = 0; x < dev->descr_len; x++)
+ printf("%02x ", dev->descr[x]);
+ printf("\n=== end dumping device descriptor data ===\n");
+ }
+#endif
+
+ dev->fd = fd;
+
+ /*
+ * Initial configuration is -1 which makes us claim first
+ * available config. We used to start with 1, which does not
+ * always work. I've seen devices where first config starts
+ * with 2.
+ */
+ if (!usb_host_claim_interfaces(dev, -1))
+ goto fail;
+
+ ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
+ if (ret < 0) {
+ perror("usb_host_device_open: USBDEVFS_CONNECTINFO");
+ goto fail;
+ }
+
+ printf("husb: grabbed usb device %d.%d\n", bus_num, addr);
+
+ ret = usb_linux_update_endp_table(dev);
+ if (ret)
+ goto fail;
+
+ if (ci.slow)
+ dev->dev.speed = USB_SPEED_LOW;
+ else
+ dev->dev.speed = USB_SPEED_HIGH;
+
+ dev->dev.handle_packet = usb_host_handle_packet;
+ dev->dev.handle_reset = usb_host_handle_reset;
+ dev->dev.handle_destroy = usb_host_handle_destroy;
+
+ if (!prod_name || prod_name[0] == '\0')
+ snprintf(dev->dev.devname, sizeof(dev->dev.devname),
+ "host:%d.%d", bus_num, addr);
+ else
+ pstrcpy(dev->dev.devname, sizeof(dev->dev.devname),
+ prod_name);
+
+ /* USB devio uses 'write' flag to check for async completions */
+ qemu_set_fd_handler(dev->fd, NULL, async_complete, dev);
+
+ hostdev_link(dev);
+
+ return (USBDevice *) dev;
+
+fail:
+ if (dev)
+ qemu_free(dev);
+
+ close(fd);
+ return NULL;
+}
+
+static int usb_host_auto_add(const char *spec);
+static int usb_host_auto_del(const char *spec);
+
+USBDevice *usb_host_device_open(const char *devname)
+{
+ int bus_num, addr;
+ char product_name[PRODUCT_NAME_SZ];
+
+ if (strstr(devname, "auto:")) {
+ usb_host_auto_add(devname);
+ return NULL;
+ }
+
+ if (usb_host_find_device(&bus_num, &addr, product_name, sizeof(product_name),
+ devname) < 0)
+ return NULL;
+
+ if (hostdev_find(bus_num, addr)) {
+ term_printf("husb: host usb device %d.%d is already open\n", bus_num, addr);
+ return NULL;
+ }
+
+ return usb_host_device_open_addr(bus_num, addr, product_name);
+}
+
+int usb_host_device_close(const char *devname)
+{
+ char product_name[PRODUCT_NAME_SZ];
+ int bus_num, addr;
+ USBHostDevice *s;
+
+ if (strstr(devname, "auto:"))
+ return usb_host_auto_del(devname);
+
+ if (usb_host_find_device(&bus_num, &addr, product_name, sizeof(product_name),
+ devname) < 0)
+ return -1;
+
+ s = hostdev_find(bus_num, addr);
+ if (s) {
+ usb_device_del_addr(0, s->dev.addr);
+ return 0;
+ }
+
+ return -1;
+}
+
+static int get_tag_value(char *buf, int buf_size,
+ const char *str, const char *tag,
+ const char *stopchars)
+{
+ const char *p;
+ char *q;
+ p = strstr(str, tag);
+ if (!p)
+ return -1;
+ p += strlen(tag);
+ while (qemu_isspace(*p))
+ p++;
+ q = buf;
+ while (*p != '\0' && !strchr(stopchars, *p)) {
+ if ((q - buf) < (buf_size - 1))
+ *q++ = *p;
+ p++;
+ }
+ *q = '\0';
+ return q - buf;
+}
+
+/*
+ * Use /proc/bus/usb/devices or /dev/bus/usb/devices file to determine
+ * host's USB devices. This is legacy support since many distributions
+ * are moving to /sys/bus/usb
+ */
+static int usb_host_scan_dev(void *opaque, USBScanFunc *func)
+{
+ FILE *f = 0;
+ char line[1024];
+ char buf[1024];
+ int bus_num, addr, speed, device_count, class_id, product_id, vendor_id;
+ char product_name[512];
+ int ret = 0;
+
+ if (!usb_host_device_path) {
+ perror("husb: USB Host Device Path not set");
+ goto the_end;
+ }
+ snprintf(line, sizeof(line), "%s/devices", usb_host_device_path);
+ f = fopen(line, "r");
+ if (!f) {
+ perror("husb: cannot open devices file");
+ goto the_end;
+ }
+
+ device_count = 0;
+ bus_num = addr = speed = class_id = product_id = vendor_id = 0;
+ for(;;) {
+ if (fgets(line, sizeof(line), f) == NULL)
+ break;
+ if (strlen(line) > 0)
+ line[strlen(line) - 1] = '\0';
+ if (line[0] == 'T' && line[1] == ':') {
+ if (device_count && (vendor_id || product_id)) {
+ /* New device. Add the previously discovered device. */
+ ret = func(opaque, bus_num, addr, class_id, vendor_id,
+ product_id, product_name, speed);
+ if (ret)
+ goto the_end;
+ }
+ if (get_tag_value(buf, sizeof(buf), line, "Bus=", " ") < 0)
+ goto fail;
+ bus_num = atoi(buf);
+ if (get_tag_value(buf, sizeof(buf), line, "Dev#=", " ") < 0)
+ goto fail;
+ addr = atoi(buf);
+ if (get_tag_value(buf, sizeof(buf), line, "Spd=", " ") < 0)
+ goto fail;
+ if (!strcmp(buf, "480"))
+ speed = USB_SPEED_HIGH;
+ else if (!strcmp(buf, "1.5"))
+ speed = USB_SPEED_LOW;
+ else
+ speed = USB_SPEED_FULL;
+ product_name[0] = '\0';
+ class_id = 0xff;
+ device_count++;
+ product_id = 0;
+ vendor_id = 0;
+ } else if (line[0] == 'P' && line[1] == ':') {
+ if (get_tag_value(buf, sizeof(buf), line, "Vendor=", " ") < 0)
+ goto fail;
+ vendor_id = strtoul(buf, NULL, 16);
+ if (get_tag_value(buf, sizeof(buf), line, "ProdID=", " ") < 0)
+ goto fail;
+ product_id = strtoul(buf, NULL, 16);
+ } else if (line[0] == 'S' && line[1] == ':') {
+ if (get_tag_value(buf, sizeof(buf), line, "Product=", "") < 0)
+ goto fail;
+ pstrcpy(product_name, sizeof(product_name), buf);
+ } else if (line[0] == 'D' && line[1] == ':') {
+ if (get_tag_value(buf, sizeof(buf), line, "Cls=", " (") < 0)
+ goto fail;
+ class_id = strtoul(buf, NULL, 16);
+ }
+ fail: ;
+ }
+ if (device_count && (vendor_id || product_id)) {
+ /* Add the last device. */
+ ret = func(opaque, bus_num, addr, class_id, vendor_id,
+ product_id, product_name, speed);
+ }
+ the_end:
+ if (f)
+ fclose(f);
+ return ret;
+}
+
+/*
+ * Read sys file-system device file
+ *
+ * @line address of buffer to put file contents in
+ * @line_size size of line
+ * @device_file path to device file (printf format string)
+ * @device_name device being opened (inserted into device_file)
+ *
+ * @return 0 failed, 1 succeeded ('line' contains data)
+ */
+static int usb_host_read_file(char *line, size_t line_size, const char *device_file, const char *device_name)
+{
+ FILE *f;
+ int ret = 0;
+ char filename[PATH_MAX];
+
+ snprintf(filename, PATH_MAX, device_file, device_name);
+ f = fopen(filename, "r");
+ if (f) {
+ fgets(line, line_size, f);
+ fclose(f);
+ ret = 1;
+ } else {
+ term_printf("husb: could not open %s\n", filename);
+ }
+
+ return ret;
+}
+
+/*
+ * Use /sys/bus/usb/devices/ directory to determine host's USB
+ * devices.
+ *
+ * This code is based on Robert Schiele's original patches posted to
+ * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950
+ */
+static int usb_host_scan_sys(void *opaque, USBScanFunc *func)
+{
+ DIR *dir = 0;
+ char line[1024];
+ int bus_num, addr, speed, class_id, product_id, vendor_id;
+ int ret = 0;
+ char product_name[512];
+ struct dirent *de;
+
+ dir = opendir(USBSYSBUS_PATH "/devices");
+ if (!dir) {
+ perror("husb: cannot open devices directory");
+ goto the_end;
+ }
+
+ while ((de = readdir(dir))) {
+ if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) {
+ char *tmpstr = de->d_name;
+ if (!strncmp(de->d_name, "usb", 3))
+ tmpstr += 3;
+ bus_num = atoi(tmpstr);
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/devnum", de->d_name))
+ goto the_end;
+ if (sscanf(line, "%d", &addr) != 1)
+ goto the_end;
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/bDeviceClass", de->d_name))
+ goto the_end;
+ if (sscanf(line, "%x", &class_id) != 1)
+ goto the_end;
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/idVendor", de->d_name))
+ goto the_end;
+ if (sscanf(line, "%x", &vendor_id) != 1)
+ goto the_end;
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/idProduct", de->d_name))
+ goto the_end;
+ if (sscanf(line, "%x", &product_id) != 1)
+ goto the_end;
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/product", de->d_name)) {
+ *product_name = 0;
+ } else {
+ if (strlen(line) > 0)
+ line[strlen(line) - 1] = '\0';
+ pstrcpy(product_name, sizeof(product_name), line);
+ }
+
+ if (!usb_host_read_file(line, sizeof(line), USBSYSBUS_PATH "/devices/%s/speed", de->d_name))
+ goto the_end;
+ if (!strcmp(line, "480\n"))
+ speed = USB_SPEED_HIGH;
+ else if (!strcmp(line, "1.5\n"))
+ speed = USB_SPEED_LOW;
+ else
+ speed = USB_SPEED_FULL;
+
+ ret = func(opaque, bus_num, addr, class_id, vendor_id,
+ product_id, product_name, speed);
+ if (ret)
+ goto the_end;
+ }
+ }
+ the_end:
+ if (dir)
+ closedir(dir);
+ return ret;
+}
+
+/*
+ * Determine how to access the host's USB devices and call the
+ * specific support function.
+ */
+static int usb_host_scan(void *opaque, USBScanFunc *func)
+{
+ FILE *f = 0;
+ DIR *dir = 0;
+ int ret = 0;
+ const char *fs_type[] = {"unknown", "proc", "dev", "sys"};
+ char devpath[PATH_MAX];
+
+ /* only check the host once */
+ if (!usb_fs_type) {
+ f = fopen(USBPROCBUS_PATH "/devices", "r");
+ if (f) {
+ /* devices found in /proc/bus/usb/ */
+ strcpy(devpath, USBPROCBUS_PATH);
+ usb_fs_type = USB_FS_PROC;
+ fclose(f);
+ dprintf(USBDBG_DEVOPENED, USBPROCBUS_PATH);
+ goto found_devices;
+ }
+ /* try additional methods if an access method hasn't been found yet */
+ f = fopen(USBDEVBUS_PATH "/devices", "r");
+ if (f) {
+ /* devices found in /dev/bus/usb/ */
+ strcpy(devpath, USBDEVBUS_PATH);
+ usb_fs_type = USB_FS_DEV;
+ fclose(f);
+ dprintf(USBDBG_DEVOPENED, USBDEVBUS_PATH);
+ goto found_devices;
+ }
+ dir = opendir(USBSYSBUS_PATH "/devices");
+ if (dir) {
+ /* devices found in /dev/bus/usb/ (yes - not a mistake!) */
+ strcpy(devpath, USBDEVBUS_PATH);
+ usb_fs_type = USB_FS_SYS;
+ closedir(dir);
+ dprintf(USBDBG_DEVOPENED, USBSYSBUS_PATH);
+ goto found_devices;
+ }
+ found_devices:
+ if (!usb_fs_type) {
+ term_printf("husb: unable to access USB devices\n");
+ return -ENOENT;
+ }
+
+ /* the module setting (used later for opening devices) */
+ usb_host_device_path = qemu_mallocz(strlen(devpath)+1);
+ if (usb_host_device_path) {
+ strcpy(usb_host_device_path, devpath);
+ term_printf("husb: using %s file-system with %s\n", fs_type[usb_fs_type], usb_host_device_path);
+ } else {
+ /* out of memory? */
+ perror("husb: unable to allocate memory for device path");
+ return -ENOMEM;
+ }
+ }
+
+ switch (usb_fs_type) {
+ case USB_FS_PROC:
+ case USB_FS_DEV:
+ ret = usb_host_scan_dev(opaque, func);
+ break;
+ case USB_FS_SYS:
+ ret = usb_host_scan_sys(opaque, func);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+struct USBAutoFilter {
+ struct USBAutoFilter *next;
+ int bus_num;
+ int addr;
+ int vendor_id;
+ int product_id;
+};
+
+static QEMUTimer *usb_auto_timer;
+static struct USBAutoFilter *usb_auto_filter;
+
+static int usb_host_auto_scan(void *opaque, int bus_num, int addr,
+ int class_id, int vendor_id, int product_id,
+ const char *product_name, int speed)
+{
+ struct USBAutoFilter *f;
+ struct USBDevice *dev;
+
+ /* Ignore hubs */
+ if (class_id == 9)
+ return 0;
+
+ for (f = usb_auto_filter; f; f = f->next) {
+ if (f->bus_num >= 0 && f->bus_num != bus_num)
+ continue;
+
+ if (f->addr >= 0 && f->addr != addr)
+ continue;
+
+ if (f->vendor_id >= 0 && f->vendor_id != vendor_id)
+ continue;
+
+ if (f->product_id >= 0 && f->product_id != product_id)
+ continue;
+
+ /* We got a match */
+
+ /* Allredy attached ? */
+ if (hostdev_find(bus_num, addr))
+ return 0;
+
+ dprintf("husb: auto open: bus_num %d addr %d\n", bus_num, addr);
+
+ dev = usb_host_device_open_addr(bus_num, addr, product_name);
+ if (dev)
+ usb_device_add_dev(dev);
+ }
+
+ return 0;
+}
+
+static void usb_host_auto_timer(void *unused)
+{
+ usb_host_scan(NULL, usb_host_auto_scan);
+ qemu_mod_timer(usb_auto_timer, qemu_get_clock(rt_clock) + 2000);
+}
+
+/*
+ * Autoconnect filter
+ * Format:
+ * auto:bus:dev[:vid:pid]
+ * auto:bus.dev[:vid:pid]
+ *
+ * bus - bus number (dec, * means any)
+ * dev - device number (dec, * means any)
+ * vid - vendor id (hex, * means any)
+ * pid - product id (hex, * means any)
+ *
+ * See 'lsusb' output.
+ */
+static int parse_filter(const char *spec, struct USBAutoFilter *f)
+{
+ enum { BUS, DEV, VID, PID, DONE };
+ const char *p = spec;
+ int i;
+
+ f->bus_num = -1;
+ f->addr = -1;
+ f->vendor_id = -1;
+ f->product_id = -1;
+
+ for (i = BUS; i < DONE; i++) {
+ p = strpbrk(p, ":.");
+ if (!p) break;
+ p++;
+
+ if (*p == '*')
+ continue;
+
+ switch(i) {
+ case BUS: f->bus_num = strtol(p, NULL, 10); break;
+ case DEV: f->addr = strtol(p, NULL, 10); break;
+ case VID: f->vendor_id = strtol(p, NULL, 16); break;
+ case PID: f->product_id = strtol(p, NULL, 16); break;
+ }
+ }
+
+ if (i < DEV) {
+ fprintf(stderr, "husb: invalid auto filter spec %s\n", spec);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int match_filter(const struct USBAutoFilter *f1,
+ const struct USBAutoFilter *f2)
+{
+ return f1->bus_num == f2->bus_num &&
+ f1->addr == f2->addr &&
+ f1->vendor_id == f2->vendor_id &&
+ f1->product_id == f2->product_id;
+}
+
+static int usb_host_auto_add(const char *spec)
+{
+ struct USBAutoFilter filter, *f;
+
+ if (parse_filter(spec, &filter) < 0)
+ return -1;
+
+ f = qemu_mallocz(sizeof(*f));
+ if (!f) {
+ fprintf(stderr, "husb: failed to allocate auto filter\n");
+ return -1;
+ }
+
+ *f = filter;
+
+ if (!usb_auto_filter) {
+ /*
+ * First entry. Init and start the monitor.
+ * Right now we're using timer to check for new devices.
+ * If this turns out to be too expensive we can move that into a
+ * separate thread.
+ */
+ usb_auto_timer = qemu_new_timer(rt_clock, usb_host_auto_timer, NULL);
+ if (!usb_auto_timer) {
+ fprintf(stderr, "husb: failed to allocate auto scan timer\n");
+ qemu_free(f);
+ return -1;
+ }
+
+ /* Check for new devices every two seconds */
+ qemu_mod_timer(usb_auto_timer, qemu_get_clock(rt_clock) + 2000);
+ }
+
+ dprintf("husb: added auto filter: bus_num %d addr %d vid %d pid %d\n",
+ f->bus_num, f->addr, f->vendor_id, f->product_id);
+
+ f->next = usb_auto_filter;
+ usb_auto_filter = f;
+
+ return 0;
+}
+
+static int usb_host_auto_del(const char *spec)
+{
+ struct USBAutoFilter *pf = usb_auto_filter;
+ struct USBAutoFilter **prev = &usb_auto_filter;
+ struct USBAutoFilter filter;
+
+ if (parse_filter(spec, &filter) < 0)
+ return -1;
+
+ while (pf) {
+ if (match_filter(pf, &filter)) {
+ dprintf("husb: removed auto filter: bus_num %d addr %d vid %d pid %d\n",
+ pf->bus_num, pf->addr, pf->vendor_id, pf->product_id);
+
+ *prev = pf->next;
+
+ if (!usb_auto_filter) {
+ /* No more filters. Stop scanning. */
+ qemu_del_timer(usb_auto_timer);
+ qemu_free_timer(usb_auto_timer);
+ }
+
+ return 0;
+ }
+
+ prev = &pf->next;
+ pf = pf->next;
+ }
+
+ return -1;
+}
+
+typedef struct FindDeviceState {
+ int vendor_id;
+ int product_id;
+ int bus_num;
+ int addr;
+ char product_name[PRODUCT_NAME_SZ];
+} FindDeviceState;
+
+static int usb_host_find_device_scan(void *opaque, int bus_num, int addr,
+ int class_id,
+ int vendor_id, int product_id,
+ const char *product_name, int speed)
+{
+ FindDeviceState *s = opaque;
+ if ((vendor_id == s->vendor_id &&
+ product_id == s->product_id) ||
+ (bus_num == s->bus_num &&
+ addr == s->addr)) {
+ pstrcpy(s->product_name, PRODUCT_NAME_SZ, product_name);
+ s->bus_num = bus_num;
+ s->addr = addr;
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/* the syntax is :
+ 'bus.addr' (decimal numbers) or
+ 'vendor_id:product_id' (hexa numbers) */
+static int usb_host_find_device(int *pbus_num, int *paddr,
+ char *product_name, int product_name_size,
+ const char *devname)
+{
+ const char *p;
+ int ret;
+ FindDeviceState fs;
+
+ p = strchr(devname, '.');
+ if (p) {
+ *pbus_num = strtoul(devname, NULL, 0);
+ *paddr = strtoul(p + 1, NULL, 0);
+ fs.bus_num = *pbus_num;
+ fs.addr = *paddr;
+ ret = usb_host_scan(&fs, usb_host_find_device_scan);
+ if (ret)
+ pstrcpy(product_name, product_name_size, fs.product_name);
+ return 0;
+ }
+
+ p = strchr(devname, ':');
+ if (p) {
+ fs.vendor_id = strtoul(devname, NULL, 16);
+ fs.product_id = strtoul(p + 1, NULL, 16);
+ ret = usb_host_scan(&fs, usb_host_find_device_scan);
+ if (ret) {
+ *pbus_num = fs.bus_num;
+ *paddr = fs.addr;
+ pstrcpy(product_name, product_name_size, fs.product_name);
+ return 0;
+ }
+ }
+ return -1;
+}
+
+/**********************/
+/* USB host device info */
+
+struct usb_class_info {
+ int class;
+ const char *class_name;
+};
+
+static const struct usb_class_info usb_class_info[] = {
+ { USB_CLASS_AUDIO, "Audio"},
+ { USB_CLASS_COMM, "Communication"},
+ { USB_CLASS_HID, "HID"},
+ { USB_CLASS_HUB, "Hub" },
+ { USB_CLASS_PHYSICAL, "Physical" },
+ { USB_CLASS_PRINTER, "Printer" },
+ { USB_CLASS_MASS_STORAGE, "Storage" },
+ { USB_CLASS_CDC_DATA, "Data" },
+ { USB_CLASS_APP_SPEC, "Application Specific" },
+ { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
+ { USB_CLASS_STILL_IMAGE, "Still Image" },
+ { USB_CLASS_CSCID, "Smart Card" },
+ { USB_CLASS_CONTENT_SEC, "Content Security" },
+ { -1, NULL }
+};
+
+static const char *usb_class_str(uint8_t class)
+{
+ const struct usb_class_info *p;
+ for(p = usb_class_info; p->class != -1; p++) {
+ if (p->class == class)
+ break;
+ }
+ return p->class_name;
+}
+
+static void usb_info_device(int bus_num, int addr, int class_id,
+ int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ const char *class_str, *speed_str;
+
+ switch(speed) {
+ case USB_SPEED_LOW:
+ speed_str = "1.5";
+ break;
+ case USB_SPEED_FULL:
+ speed_str = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed_str = "480";
+ break;
+ default:
+ speed_str = "?";
+ break;
+ }
+
+ term_printf(" Device %d.%d, speed %s Mb/s\n",
+ bus_num, addr, speed_str);
+ class_str = usb_class_str(class_id);
+ if (class_str)
+ term_printf(" %s:", class_str);
+ else
+ term_printf(" Class %02x:", class_id);
+ term_printf(" USB device %04x:%04x", vendor_id, product_id);
+ if (product_name[0] != '\0')
+ term_printf(", %s", product_name);
+ term_printf("\n");
+}
+
+static int usb_host_info_device(void *opaque, int bus_num, int addr,
+ int class_id,
+ int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ usb_info_device(bus_num, addr, class_id, vendor_id, product_id,
+ product_name, speed);
+ return 0;
+}
+
+static void dec2str(int val, char *str, size_t size)
+{
+ if (val == -1)
+ snprintf(str, size, "*");
+ else
+ snprintf(str, size, "%d", val);
+}
+
+static void hex2str(int val, char *str, size_t size)
+{
+ if (val == -1)
+ snprintf(str, size, "*");
+ else
+ snprintf(str, size, "%x", val);
+}
+
+void usb_host_info(void)
+{
+ struct USBAutoFilter *f;
+
+ usb_host_scan(NULL, usb_host_info_device);
+
+ if (usb_auto_filter)
+ term_printf(" Auto filters:\n");
+ for (f = usb_auto_filter; f; f = f->next) {
+ char bus[10], addr[10], vid[10], pid[10];
+ dec2str(f->bus_num, bus, sizeof(bus));
+ dec2str(f->addr, addr, sizeof(addr));
+ hex2str(f->vendor_id, vid, sizeof(vid));
+ hex2str(f->product_id, pid, sizeof(pid));
+ term_printf(" Device %s.%s ID %s:%s\n", bus, addr, vid, pid);
+ }
+}