New elf4rom that solves the ROMBULD.log header problem.
/*
* qemu user main
*
* Copyright (c) 2003 Fabrice Bellard
* Copyright (c) 2006 Pierre d'Herbemont
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <stdlib.h>
#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#include "qemu.h"
#define DEBUG_LOGFILE "/tmp/qemu.log"
#ifdef __APPLE__
#include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#include <mach/mach_init.h>
#include <mach/vm_map.h>
const char *interp_prefix = "";
asm(".zerofill __STD_PROG_ZONE, __STD_PROG_ZONE, __std_prog_zone, 0x0dfff000");
/* XXX: on x86 MAP_GROWSDOWN only works if ESP <= address + 32, so
we allocate a bigger stack. Need a better solution, for example
by remapping the process stack directly at the right place */
unsigned long stack_size = 512 * 1024;
void qerror(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
vfprintf(stderr, fmt, ap);
va_end(ap);
fprintf(stderr, "\n");
exit(1);
}
void gemu_log(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
vfprintf(stderr, fmt, ap);
va_end(ap);
}
void cpu_outb(CPUState *env, int addr, int val)
{
fprintf(stderr, "outb: port=0x%04x, data=%02x\n", addr, val);
}
void cpu_outw(CPUState *env, int addr, int val)
{
fprintf(stderr, "outw: port=0x%04x, data=%04x\n", addr, val);
}
void cpu_outl(CPUState *env, int addr, int val)
{
fprintf(stderr, "outl: port=0x%04x, data=%08x\n", addr, val);
}
int cpu_inb(CPUState *env, int addr)
{
fprintf(stderr, "inb: port=0x%04x\n", addr);
return 0;
}
int cpu_inw(CPUState *env, int addr)
{
fprintf(stderr, "inw: port=0x%04x\n", addr);
return 0;
}
int cpu_inl(CPUState *env, int addr)
{
fprintf(stderr, "inl: port=0x%04x\n", addr);
return 0;
}
int cpu_get_pic_interrupt(CPUState *env)
{
return -1;
}
#ifdef TARGET_PPC
static inline uint64_t cpu_ppc_get_tb (CPUState *env)
{
/* TO FIX */
return 0;
}
uint32_t cpu_ppc_load_tbl (CPUState *env)
{
return cpu_ppc_get_tb(env) & 0xFFFFFFFF;
}
uint32_t cpu_ppc_load_tbu (CPUState *env)
{
return cpu_ppc_get_tb(env) >> 32;
}
uint32_t cpu_ppc_load_atbl (CPUState *env)
{
return cpu_ppc_get_tb(env) & 0xFFFFFFFF;
}
uint32_t cpu_ppc_load_atbu (CPUState *env)
{
return cpu_ppc_get_tb(env) >> 32;
}
uint32_t cpu_ppc601_load_rtcu (CPUState *env)
{
cpu_ppc_load_tbu(env);
}
uint32_t cpu_ppc601_load_rtcl (CPUState *env)
{
return cpu_ppc_load_tbl(env) & 0x3FFFFF80;
}
/* XXX: to be fixed */
int ppc_dcr_read (ppc_dcr_t *dcr_env, int dcrn, target_ulong *valp)
{
return -1;
}
int ppc_dcr_write (ppc_dcr_t *dcr_env, int dcrn, target_ulong val)
{
return -1;
}
#define EXCP_DUMP(env, fmt, args...) \
do { \
fprintf(stderr, fmt , ##args); \
cpu_dump_state(env, stderr, fprintf, 0); \
if (loglevel != 0) { \
fprintf(logfile, fmt , ##args); \
cpu_dump_state(env, logfile, fprintf, 0); \
} \
} while (0)
void cpu_loop(CPUPPCState *env)
{
int trapnr;
uint32_t ret;
target_siginfo_t info;
for(;;) {
trapnr = cpu_ppc_exec(env);
switch(trapnr) {
case POWERPC_EXCP_NONE:
/* Just go on */
break;
case POWERPC_EXCP_CRITICAL: /* Critical input */
cpu_abort(env, "Critical interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_MCHECK: /* Machine check exception */
cpu_abort(env, "Machine check exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_DSI: /* Data storage exception */
#ifndef DAR
/* To deal with multiple qemu header version as host for the darwin-user code */
# define DAR SPR_DAR
#endif
EXCP_DUMP(env, "Invalid data memory access: 0x" ADDRX "\n",
env->spr[SPR_DAR]);
/* Handle this via the gdb */
gdb_handlesig (env, SIGSEGV);
info.si_addr = (void*)env->nip;
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_ISI: /* Instruction storage exception */
EXCP_DUMP(env, "Invalid instruction fetch: 0x\n" ADDRX "\n",
env->spr[SPR_DAR]);
/* Handle this via the gdb */
gdb_handlesig (env, SIGSEGV);
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_EXTERNAL: /* External input */
cpu_abort(env, "External interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_ALIGN: /* Alignment exception */
EXCP_DUMP(env, "Unaligned memory access\n");
info.si_errno = 0;
info.si_code = BUS_ADRALN;
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_PROGRAM: /* Program exception */
/* XXX: check this */
switch (env->error_code & ~0xF) {
case POWERPC_EXCP_FP:
EXCP_DUMP(env, "Floating point program exception\n");
/* Set FX */
info.si_signo = SIGFPE;
info.si_errno = 0;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_FP_OX:
info.si_code = FPE_FLTOVF;
break;
case POWERPC_EXCP_FP_UX:
info.si_code = FPE_FLTUND;
break;
case POWERPC_EXCP_FP_ZX:
case POWERPC_EXCP_FP_VXZDZ:
info.si_code = FPE_FLTDIV;
break;
case POWERPC_EXCP_FP_XX:
info.si_code = FPE_FLTRES;
break;
case POWERPC_EXCP_FP_VXSOFT:
info.si_code = FPE_FLTINV;
break;
case POWERPC_EXCP_FP_VXSNAN:
case POWERPC_EXCP_FP_VXISI:
case POWERPC_EXCP_FP_VXIDI:
case POWERPC_EXCP_FP_VXIMZ:
case POWERPC_EXCP_FP_VXVC:
case POWERPC_EXCP_FP_VXSQRT:
case POWERPC_EXCP_FP_VXCVI:
info.si_code = FPE_FLTSUB;
break;
default:
EXCP_DUMP(env, "Unknown floating point exception (%02x)\n",
env->error_code);
break;
}
break;
case POWERPC_EXCP_INVAL:
EXCP_DUMP(env, "Invalid instruction\n");
info.si_signo = SIGILL;
info.si_errno = 0;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_INVAL_INVAL:
info.si_code = ILL_ILLOPC;
break;
case POWERPC_EXCP_INVAL_LSWX:
info.si_code = ILL_ILLOPN;
break;
case POWERPC_EXCP_INVAL_SPR:
info.si_code = ILL_PRVREG;
break;
case POWERPC_EXCP_INVAL_FP:
info.si_code = ILL_COPROC;
break;
default:
EXCP_DUMP(env, "Unknown invalid operation (%02x)\n",
env->error_code & 0xF);
info.si_code = ILL_ILLADR;
break;
}
/* Handle this via the gdb */
gdb_handlesig (env, SIGSEGV);
break;
case POWERPC_EXCP_PRIV:
EXCP_DUMP(env, "Privilege violation\n");
info.si_signo = SIGILL;
info.si_errno = 0;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_PRIV_OPC:
info.si_code = ILL_PRVOPC;
break;
case POWERPC_EXCP_PRIV_REG:
info.si_code = ILL_PRVREG;
break;
default:
EXCP_DUMP(env, "Unknown privilege violation (%02x)\n",
env->error_code & 0xF);
info.si_code = ILL_PRVOPC;
break;
}
break;
case POWERPC_EXCP_TRAP:
cpu_abort(env, "Tried to call a TRAP\n");
break;
default:
/* Should not happen ! */
cpu_abort(env, "Unknown program exception (%02x)\n",
env->error_code);
break;
}
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_FPU: /* Floating-point unavailable exception */
EXCP_DUMP(env, "No floating point allowed\n");
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_COPROC;
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_SYSCALL: /* System call exception */
cpu_abort(env, "Syscall exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_APU: /* Auxiliary processor unavailable */
EXCP_DUMP(env, "No APU instruction allowed\n");
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_COPROC;
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_DECR: /* Decrementer exception */
cpu_abort(env, "Decrementer interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_FIT: /* Fixed-interval timer interrupt */
cpu_abort(env, "Fix interval timer interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_WDT: /* Watchdog timer interrupt */
cpu_abort(env, "Watchdog timer interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_DTLB: /* Data TLB error */
cpu_abort(env, "Data TLB exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_ITLB: /* Instruction TLB error */
cpu_abort(env, "Instruction TLB exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_DEBUG: /* Debug interrupt */
gdb_handlesig (env, SIGTRAP);
break;
case POWERPC_EXCP_SPEU: /* SPE/embedded floating-point unavail. */
EXCP_DUMP(env, "No SPE/floating-point instruction allowed\n");
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_COPROC;
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_EFPDI: /* Embedded floating-point data IRQ */
cpu_abort(env, "Embedded floating-point data IRQ not handled\n");
break;
case POWERPC_EXCP_EFPRI: /* Embedded floating-point round IRQ */
cpu_abort(env, "Embedded floating-point round IRQ not handled\n");
break;
case POWERPC_EXCP_EPERFM: /* Embedded performance monitor IRQ */
cpu_abort(env, "Performance monitor exception not handled\n");
break;
case POWERPC_EXCP_DOORI: /* Embedded doorbell interrupt */
cpu_abort(env, "Doorbell interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_DOORCI: /* Embedded doorbell critical interrupt */
cpu_abort(env, "Doorbell critical interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_RESET: /* System reset exception */
cpu_abort(env, "Reset interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_DSEG: /* Data segment exception */
cpu_abort(env, "Data segment exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_ISEG: /* Instruction segment exception */
cpu_abort(env, "Instruction segment exception "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_HDECR: /* Hypervisor decrementer exception */
cpu_abort(env, "Hypervisor decrementer interrupt "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_TRACE: /* Trace exception */
/* Nothing to do:
* we use this exception to emulate step-by-step execution mode.
*/
break;
case POWERPC_EXCP_HDSI: /* Hypervisor data storage exception */
cpu_abort(env, "Hypervisor data storage exception "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_HISI: /* Hypervisor instruction storage excp */
cpu_abort(env, "Hypervisor instruction storage exception "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_HDSEG: /* Hypervisor data segment exception */
cpu_abort(env, "Hypervisor data segment exception "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_HISEG: /* Hypervisor instruction segment excp */
cpu_abort(env, "Hypervisor instruction segment exception "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_VPU: /* Vector unavailable exception */
EXCP_DUMP(env, "No Altivec instructions allowed\n");
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_COPROC;
info.si_addr = (void*)(env->nip - 4);
queue_signal(info.si_signo, &info);
break;
case POWERPC_EXCP_PIT: /* Programmable interval timer IRQ */
cpu_abort(env, "Programable interval timer interrupt "
"while in user mode. Aborting\n");
break;
case POWERPC_EXCP_IO: /* IO error exception */
cpu_abort(env, "IO error exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_RUNM: /* Run mode exception */
cpu_abort(env, "Run mode exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_EMUL: /* Emulation trap exception */
cpu_abort(env, "Emulation trap exception not handled\n");
break;
case POWERPC_EXCP_IFTLB: /* Instruction fetch TLB error */
cpu_abort(env, "Instruction fetch TLB exception "
"while in user-mode. Aborting");
break;
case POWERPC_EXCP_DLTLB: /* Data load TLB miss */
cpu_abort(env, "Data load TLB exception while in user-mode. "
"Aborting");
break;
case POWERPC_EXCP_DSTLB: /* Data store TLB miss */
cpu_abort(env, "Data store TLB exception while in user-mode. "
"Aborting");
break;
case POWERPC_EXCP_FPA: /* Floating-point assist exception */
cpu_abort(env, "Floating-point assist exception not handled\n");
break;
case POWERPC_EXCP_IABR: /* Instruction address breakpoint */
cpu_abort(env, "Instruction address breakpoint exception "
"not handled\n");
break;
case POWERPC_EXCP_SMI: /* System management interrupt */
cpu_abort(env, "System management interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_THERM: /* Thermal interrupt */
cpu_abort(env, "Thermal interrupt interrupt while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_PERFM: /* Embedded performance monitor IRQ */
cpu_abort(env, "Performance monitor exception not handled\n");
break;
case POWERPC_EXCP_VPUA: /* Vector assist exception */
cpu_abort(env, "Vector assist exception not handled\n");
break;
case POWERPC_EXCP_SOFTP: /* Soft patch exception */
cpu_abort(env, "Soft patch exception not handled\n");
break;
case POWERPC_EXCP_MAINT: /* Maintenance exception */
cpu_abort(env, "Maintenance exception while in user mode. "
"Aborting\n");
break;
case POWERPC_EXCP_STOP: /* stop translation */
/* We did invalidate the instruction cache. Go on */
break;
case POWERPC_EXCP_BRANCH: /* branch instruction: */
/* We just stopped because of a branch. Go on */
break;
case POWERPC_EXCP_SYSCALL_USER:
/* system call in user-mode emulation */
/* system call */
if(((int)env->gpr[0]) <= SYS_MAXSYSCALL && ((int)env->gpr[0])>0)
ret = do_unix_syscall(env, env->gpr[0]/*, env->gpr[3], env->gpr[4],
env->gpr[5], env->gpr[6], env->gpr[7],
env->gpr[8], env->gpr[9], env->gpr[10]*/);
else if(((int)env->gpr[0])<0)
ret = do_mach_syscall(env, env->gpr[0], env->gpr[3], env->gpr[4],
env->gpr[5], env->gpr[6], env->gpr[7],
env->gpr[8], env->gpr[9], env->gpr[10]);
else
ret = do_thread_syscall(env, env->gpr[0], env->gpr[3], env->gpr[4],
env->gpr[5], env->gpr[6], env->gpr[7],
env->gpr[8], env->gpr[9], env->gpr[10]);
/* Unix syscall error signaling */
if(((int)env->gpr[0]) <= SYS_MAXSYSCALL && ((int)env->gpr[0])>0)
{
if( (int)ret < 0 )
env->nip += 0;
else
env->nip += 4;
}
/* Return value */
env->gpr[3] = ret;
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
default:
cpu_abort(env, "Unknown exception 0x%d. Aborting\n", trapnr);
break;
}
process_pending_signals(env);
}
}
#endif
#ifdef TARGET_I386
/***********************************************************/
/* CPUX86 core interface */
uint64_t cpu_get_tsc(CPUX86State *env)
{
return cpu_get_real_ticks();
}
void
write_dt(void *ptr, unsigned long addr, unsigned long limit,
int flags)
{
unsigned int e1, e2;
e1 = (addr << 16) | (limit & 0xffff);
e2 = ((addr >> 16) & 0xff) | (addr & 0xff000000) | (limit & 0x000f0000);
e2 |= flags;
stl((uint8_t *)ptr, e1);
stl((uint8_t *)ptr + 4, e2);
}
static void set_gate(void *ptr, unsigned int type, unsigned int dpl,
unsigned long addr, unsigned int sel)
{
unsigned int e1, e2;
e1 = (addr & 0xffff) | (sel << 16);
e2 = (addr & 0xffff0000) | 0x8000 | (dpl << 13) | (type << 8);
stl((uint8_t *)ptr, e1);
stl((uint8_t *)ptr + 4, e2);
}
#define GDT_TABLE_SIZE 14
#define LDT_TABLE_SIZE 15
#define IDT_TABLE_SIZE 256
#define TSS_SIZE 104
uint64_t gdt_table[GDT_TABLE_SIZE];
uint64_t ldt_table[LDT_TABLE_SIZE];
uint64_t idt_table[IDT_TABLE_SIZE];
uint32_t tss[TSS_SIZE];
/* only dpl matters as we do only user space emulation */
static void set_idt(int n, unsigned int dpl)
{
set_gate(idt_table + n, 0, dpl, 0, 0);
}
/* ABI convention: after a syscall if there was an error the CF flag is set */
static inline void set_error(CPUX86State *env, int ret)
{
if(ret<0)
env->eflags = env->eflags | 0x1;
else
env->eflags &= ~0x1;
env->regs[R_EAX] = ret;
}
void cpu_loop(CPUX86State *env)
{
int trapnr;
int ret;
uint8_t *pc;
target_siginfo_t info;
for(;;) {
trapnr = cpu_x86_exec(env);
uint32_t *params = (uint32_t *)env->regs[R_ESP];
switch(trapnr) {
case 0x79: /* Our commpage hack back door exit is here */
do_commpage(env, env->eip, *(params + 1), *(params + 2),
*(params + 3), *(params + 4),
*(params + 5), *(params + 6),
*(params + 7), *(params + 8));
break;
case 0x81: /* mach syscall */
{
ret = do_mach_syscall(env, env->regs[R_EAX],
*(params + 1), *(params + 2),
*(params + 3), *(params + 4),
*(params + 5), *(params + 6),
*(params + 7), *(params + 8));
set_error(env, ret);
break;
}
case 0x90: /* unix backdoor */
{
/* after sysenter, stack is in R_ECX, new eip in R_EDX (sysexit will flip them back)*/
int saved_stack = env->regs[R_ESP];
env->regs[R_ESP] = env->regs[R_ECX];
ret = do_unix_syscall(env, env->regs[R_EAX]);
env->regs[R_ECX] = env->regs[R_ESP];
env->regs[R_ESP] = saved_stack;
set_error(env, ret);
break;
}
case 0x80: /* unix syscall */
{
ret = do_unix_syscall(env, env->regs[R_EAX]/*,
*(params + 1), *(params + 2),
*(params + 3), *(params + 4),
*(params + 5), *(params + 6),
*(params + 7), *(params + 8)*/);
set_error(env, ret);
break;
}
case 0x82: /* thread syscall */
{
ret = do_thread_syscall(env, env->regs[R_EAX],
*(params + 1), *(params + 2),
*(params + 3), *(params + 4),
*(params + 5), *(params + 6),
*(params + 7), *(params + 8));
set_error(env, ret);
break;
}
case EXCP0B_NOSEG:
case EXCP0C_STACK:
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_NOOP;
info.si_addr = 0;
gdb_handlesig (env, SIGBUS);
queue_signal(info.si_signo, &info);
break;
case EXCP0D_GPF:
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_code = SEGV_NOOP;
info.si_addr = 0;
gdb_handlesig (env, SIGSEGV);
queue_signal(info.si_signo, &info);
break;
case EXCP0E_PAGE:
info.si_signo = SIGSEGV;
info.si_errno = 0;
if (!(env->error_code & 1))
info.si_code = SEGV_MAPERR;
else
info.si_code = SEGV_ACCERR;
info.si_addr = (void*)env->cr[2];
gdb_handlesig (env, SIGSEGV);
queue_signal(info.si_signo, &info);
break;
case EXCP00_DIVZ:
/* division by zero */
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_code = FPE_INTDIV;
info.si_addr = (void*)env->eip;
gdb_handlesig (env, SIGFPE);
queue_signal(info.si_signo, &info);
break;
case EXCP01_SSTP:
case EXCP03_INT3:
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
info.si_addr = (void*)env->eip;
gdb_handlesig (env, SIGTRAP);
queue_signal(info.si_signo, &info);
break;
case EXCP04_INTO:
case EXCP05_BOUND:
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_code = SEGV_NOOP;
info.si_addr = 0;
gdb_handlesig (env, SIGSEGV);
queue_signal(info.si_signo, &info);
break;
case EXCP06_ILLOP:
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_ILLOPN;
info.si_addr = (void*)env->eip;
gdb_handlesig (env, SIGILL);
queue_signal(info.si_signo, &info);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
{
int sig;
sig = gdb_handlesig (env, SIGTRAP);
if (sig)
{
info.si_signo = sig;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
queue_signal(info.si_signo, &info);
}
}
break;
default:
pc = (void*)(env->segs[R_CS].base + env->eip);
fprintf(stderr, "qemu: 0x%08lx: unhandled CPU exception 0x%x - aborting\n",
(long)pc, trapnr);
abort();
}
process_pending_signals(env);
}
}
#endif
void usage(void)
{
printf("qemu-" TARGET_ARCH " version " QEMU_VERSION ", Copyright (c) 2003-2004 Fabrice Bellard\n"
"usage: qemu-" TARGET_ARCH " [-h] [-d opts] [-L path] [-s size] program [arguments...]\n"
"Darwin CPU emulator (compiled for %s emulation)\n"
"\n"
"-h print this help\n"
"-L path set the %s library path (default='%s')\n"
"-s size set the stack size in bytes (default=%ld)\n"
"\n"
"debug options:\n"
"-d options activate log (logfile='%s')\n"
"-g wait for gdb on port 1234\n"
"-p pagesize set the host page size to 'pagesize'\n",
TARGET_ARCH,
TARGET_ARCH,
interp_prefix,
stack_size,
DEBUG_LOGFILE);
_exit(1);
}
/* XXX: currently only used for async signals (see signal.c) */
CPUState *global_env;
/* used only if single thread */
CPUState *cpu_single_env = NULL;
/* used to free thread contexts */
TaskState *first_task_state;
int main(int argc, char **argv)
{
const char *filename;
struct target_pt_regs regs1, *regs = ®s1;
TaskState ts1, *ts = &ts1;
CPUState *env;
int optind;
short use_gdbstub = 0;
const char *r;
const char *cpu_model;
if (argc <= 1)
usage();
/* init debug */
cpu_set_log_filename(DEBUG_LOGFILE);
optind = 1;
for(;;) {
if (optind >= argc)
break;
r = argv[optind];
if (r[0] != '-')
break;
optind++;
r++;
if (!strcmp(r, "-")) {
break;
} else if (!strcmp(r, "d")) {
int mask;
CPULogItem *item;
if (optind >= argc)
break;
r = argv[optind++];
mask = cpu_str_to_log_mask(r);
if (!mask) {
printf("Log items (comma separated):\n");
for(item = cpu_log_items; item->mask != 0; item++) {
printf("%-10s %s\n", item->name, item->help);
}
exit(1);
}
cpu_set_log(mask);
} else if (!strcmp(r, "s")) {
r = argv[optind++];
stack_size = strtol(r, (char **)&r, 0);
if (stack_size <= 0)
usage();
if (*r == 'M')
stack_size *= 1024 * 1024;
else if (*r == 'k' || *r == 'K')
stack_size *= 1024;
} else if (!strcmp(r, "L")) {
interp_prefix = argv[optind++];
} else if (!strcmp(r, "p")) {
qemu_host_page_size = atoi(argv[optind++]);
if (qemu_host_page_size == 0 ||
(qemu_host_page_size & (qemu_host_page_size - 1)) != 0) {
fprintf(stderr, "page size must be a power of two\n");
exit(1);
}
} else
if (!strcmp(r, "g")) {
use_gdbstub = 1;
} else if (!strcmp(r, "cpu")) {
cpu_model = argv[optind++];
if (strcmp(cpu_model, "?") == 0) {
/* XXX: implement xxx_cpu_list for targets that still miss it */
#if defined(cpu_list)
cpu_list(stdout, &fprintf);
#endif
_exit(1);
}
} else
{
usage();
}
}
if (optind >= argc)
usage();
filename = argv[optind];
/* Zero out regs */
memset(regs, 0, sizeof(struct target_pt_regs));
if (cpu_model == NULL) {
#if defined(TARGET_I386)
#ifdef TARGET_X86_64
cpu_model = "qemu64";
#else
cpu_model = "qemu32";
#endif
#elif defined(TARGET_PPC)
#ifdef TARGET_PPC64
cpu_model = "970";
#else
cpu_model = "750";
#endif
#else
#error unsupported CPU
#endif
}
cpu_exec_init_all(0);
/* NOTE: we need to init the CPU at this stage to get
qemu_host_page_size */
env = cpu_init(cpu_model);
printf("Starting %s with qemu\n----------------\n", filename);
commpage_init();
if (mach_exec(filename, argv+optind, environ, regs) != 0) {
printf("Error loading %s\n", filename);
_exit(1);
}
syscall_init();
signal_init();
global_env = env;
/* build Task State */
memset(ts, 0, sizeof(TaskState));
env->opaque = ts;
ts->used = 1;
env->user_mode_only = 1;
#if defined(TARGET_I386)
cpu_x86_set_cpl(env, 3);
env->cr[0] = CR0_PG_MASK | CR0_WP_MASK | CR0_PE_MASK;
env->hflags |= HF_PE_MASK;
if (env->cpuid_features & CPUID_SSE) {
env->cr[4] |= CR4_OSFXSR_MASK;
env->hflags |= HF_OSFXSR_MASK;
}
/* flags setup : we activate the IRQs by default as in user mode */
env->eflags |= IF_MASK;
/* darwin register setup */
env->regs[R_EAX] = regs->eax;
env->regs[R_EBX] = regs->ebx;
env->regs[R_ECX] = regs->ecx;
env->regs[R_EDX] = regs->edx;
env->regs[R_ESI] = regs->esi;
env->regs[R_EDI] = regs->edi;
env->regs[R_EBP] = regs->ebp;
env->regs[R_ESP] = regs->esp;
env->eip = regs->eip;
/* Darwin LDT setup */
/* 2 - User code segment
3 - User data segment
4 - User cthread */
bzero(ldt_table, LDT_TABLE_SIZE * sizeof(ldt_table[0]));
env->ldt.base = (uint32_t) ldt_table;
env->ldt.limit = sizeof(ldt_table) - 1;
write_dt(ldt_table + 2, 0, 0xfffff,
DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK |
(3 << DESC_DPL_SHIFT) | (0xa << DESC_TYPE_SHIFT));
write_dt(ldt_table + 3, 0, 0xfffff,
DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK |
(3 << DESC_DPL_SHIFT) | (0x2 << DESC_TYPE_SHIFT));
write_dt(ldt_table + 4, 0, 0xfffff,
DESC_G_MASK | DESC_B_MASK | DESC_P_MASK | DESC_S_MASK |
(3 << DESC_DPL_SHIFT) | (0x2 << DESC_TYPE_SHIFT));
/* Darwin GDT setup.
* has changed a lot between old Darwin/x86 (pre-Mac Intel) and Mac OS X/x86,
now everything is done via int 0x81(mach) int 0x82 (thread) and sysenter/sysexit(unix) */
bzero(gdt_table, sizeof(gdt_table));
env->gdt.base = (uint32_t)gdt_table;
env->gdt.limit = sizeof(gdt_table) - 1;
/* Set up a back door to handle sysenter syscalls (unix) */
char * syscallbackdoor = malloc(64);
page_set_flags((int)syscallbackdoor, (int)syscallbackdoor + 64, PROT_EXEC | PROT_READ | PAGE_VALID);
int i = 0;
syscallbackdoor[i++] = 0xcd;
syscallbackdoor[i++] = 0x90; /* int 0x90 */
syscallbackdoor[i++] = 0x0F;
syscallbackdoor[i++] = 0x35; /* sysexit */
/* Darwin sysenter/sysexit setup */
env->sysenter_cs = 0x1; //XXX
env->sysenter_eip = (int)syscallbackdoor;
env->sysenter_esp = (int)malloc(64);
/* Darwin TSS setup
This must match up with GDT[4] */
env->tr.base = (uint32_t) tss;
env->tr.limit = sizeof(tss) - 1;
env->tr.flags = DESC_P_MASK | (0x9 << DESC_TYPE_SHIFT);
stw(tss + 2, 0x10); // ss0 = 0x10 = GDT[2] = Kernel Data Segment
/* Darwin interrupt setup */
bzero(idt_table, sizeof(idt_table));
env->idt.base = (uint32_t) idt_table;
env->idt.limit = sizeof(idt_table) - 1;
set_idt(0, 0);
set_idt(1, 0);
set_idt(2, 0);
set_idt(3, 3);
set_idt(4, 3);
set_idt(5, 3);
set_idt(6, 0);
set_idt(7, 0);
set_idt(8, 0);
set_idt(9, 0);
set_idt(10, 0);
set_idt(11, 0);
set_idt(12, 0);
set_idt(13, 0);
set_idt(14, 0);
set_idt(15, 0);
set_idt(16, 0);
set_idt(17, 0);
set_idt(18, 0);
set_idt(19, 0);
/* Syscalls are done via
int 0x80 (unix) (rarely used)
int 0x81 (mach)
int 0x82 (thread)
int 0x83 (diag) (not handled here)
sysenter/sysexit (unix) -> we redirect that to int 0x90 */
set_idt(0x79, 3); /* Commpage hack, here is our backdoor interrupt */
set_idt(0x80, 3); /* Unix Syscall */
set_idt(0x81, 3); /* Mach Syscalls */
set_idt(0x82, 3); /* thread Syscalls */
set_idt(0x90, 3); /* qemu-darwin-user's Unix syscalls backdoor */
cpu_x86_load_seg(env, R_CS, __USER_CS);
cpu_x86_load_seg(env, R_DS, __USER_DS);
cpu_x86_load_seg(env, R_ES, __USER_DS);
cpu_x86_load_seg(env, R_SS, __USER_DS);
cpu_x86_load_seg(env, R_FS, __USER_DS);
cpu_x86_load_seg(env, R_GS, __USER_DS);
#elif defined(TARGET_PPC)
{
int i;
#if defined(TARGET_PPC64)
#if defined(TARGET_ABI32)
env->msr &= ~((target_ulong)1 << MSR_SF);
#else
env->msr |= (target_ulong)1 << MSR_SF;
#endif
#endif
env->nip = regs->nip;
for(i = 0; i < 32; i++) {
env->gpr[i] = regs->gpr[i];
}
}
#else
#error unsupported target CPU
#endif
if (use_gdbstub) {
printf("Waiting for gdb Connection on port 1234...\n");
gdbserver_start (1234);
gdb_handlesig(env, 0);
}
cpu_loop(env);
/* never exits */
return 0;
}