Txn/TxnQueue.h
author shahar_levi@ti.com
Tue, 29 Jun 2010 12:34:26 +0100
changeset 0 10c42ec6c05f
permissions -rw-r--r--
version WiLink_Driver_6.1.1.0.8

/*
 * TxnQueue.h
 *
 * Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.      
 * All rights reserved.      
 * 
 * This program and the accompanying materials are made available under the 
 * terms of the Eclipse Public License v1.0 or BSD License which accompanies
 * this distribution. The Eclipse Public License is available at
 * http://www.eclipse.org/legal/epl-v10.html and the BSD License is as below.                                   
 *                                                                       
 * Redistribution and use in source and binary forms, with or without    
 * modification, are permitted provided that the following conditions    
 * are met:                                                              
 *                                                                       
 *  * Redistributions of source code must retain the above copyright     
 *    notice, this list of conditions and the following disclaimer.      
 *  * Redistributions in binary form must reproduce the above copyright  
 *    notice, this list of conditions and the following disclaimer in    
 *    the documentation and/or other materials provided with the         
 *    distribution.                                                      
 *  * Neither the name Texas Instruments nor the names of its            
 *    contributors may be used to endorse or promote products derived    
 *    from this software without specific prior written permission.      
 *                                                                       
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS   
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT     
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT  
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT      
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT   
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */


/** \file   TxnQueue.h 
 *  \brief  TxnQueue module API definition                                  
 *
 *  \see    TxnQueue.c
 */

#ifndef __TXN_QUEUE_API_H__
#define __TXN_QUEUE_API_H__


#include "TxnDefs.h"
#include "BusDrv.h"



/************************************************************************
 * Defines
 ************************************************************************/


/************************************************************************
 * Macros
 ************************************************************************/


/************************************************************************
 * Types
 ************************************************************************/


/************************************************************************
 * Functions
 ************************************************************************/
/** \brief	Create the TxnQ module
 * 
 * \param  hOs - Handle to Os Abstraction Layer
 * \return Handle of the allocated object, NULL if allocation failed 
 * 
 * \par Description
 * Allocate and clear the module's object
 *
 * \sa	txnQ_Destroy
 */ 
TI_HANDLE   txnQ_Create (TI_HANDLE hOs);

/** \brief	Destroy the module
 * 
 * \param  The module's object
 * \return TI_OK on success or TI_NOK on failure 
 * 
 * \par Description
 * Destroy bus driver and free the module's object
 *
 * \sa	txnQ_Create
 */ 
TI_STATUS   txnQ_Destroy (TI_HANDLE hTxnQ);

/** \brief	Init module
 * 
 * \param  hTxnQ     - The module's object
 * \param  hOs       - Handle to Os Abstraction Layer
 * \param  hReport   - Handle to report module
 * \param  hContext  - Handle to context module
 * \return void        
 * 
 * \par Description
 *
 * \sa
 */ 
void        txnQ_Init (TI_HANDLE hTxnQ, 
					   TI_HANDLE hOs, 
					   TI_HANDLE hReport, 
					   TI_HANDLE hContext);

/** \brief	Configure bus driver
 * 
 * \param  hTxnQ      - The module's object
 * \param  pBusDrvCfg - A union used for per-bus specific configuration. 
 * \param  pRxDmaBufLen - The Rx DMA buffer length in bytes (needed as a limit of the Rx aggregation length)
 * \param  pTxDmaBufLen - The Tx DMA buffer length in bytes (needed as a limit of the Tx aggregation length)
 * \return TI_OK / TI_NOK
 * 
 * \par Description
 * Called by DrvMain (future - by Chip-Manager).
 * Configure the bus driver with its connection configuration (such as baud-rate, bus width etc) 
 * and establish the physical connection. Done once (and not per functional driver startup). 
 * 
 * \sa
 */ 
TI_STATUS   txnQ_ConnectBus (TI_HANDLE hTxnQ, 
							 TBusDrvCfg *pBusDrvCfg,
							 TTxnDoneCb fConnectCb,
							 TI_HANDLE  hConnectCb, 
                             TI_UINT32  *pRxDmaBufLen,
                             TI_UINT32  *pTxDmaBufLen);

/** \brief	Disconnect bus driver
 * 
 * \param  hTxnQ      - The module's object
 * \return TI_OK / TI_NOK
 * 
 * \par Description
 * Called by DrvMain (future - by Chip-Manager).
 * Disconnect the bus driver.
 * 
 * \sa
 */ 
TI_STATUS   txnQ_DisconnectBus (TI_HANDLE hTxnQ);

/** \brief	Register functional driver to TxnQ
 * 
 * \param  hTxnQ           - The module's object
 * \param  uFuncId         - The calling functional driver
 * \param  uNumPrios       - The number of queues/priorities
 * \param  fTxnQueueDoneCb - The callback to call upon full transaction completion.
 * \param  hCbHandle       - The callback handle                              
 * \return TI_OK / TI_NOK
 * 
 * \par Description
 * Called by each functional driver (WLAN, future-BT) that uses the TxnQ.
 * Save driver's info and create its queues. 
 * Perform in critical section to prevent preemption from TxnDone.
 * 
 * \sa	txnQ_Close
 */ 
TI_STATUS   txnQ_Open (TI_HANDLE       hTxnQ, 
                       TI_UINT32       uFuncId, 
                       TI_UINT32       uNumPrios, 
                       TTxnQueueDoneCb fTxnQueueDoneCb,
                       TI_HANDLE       hCbHandle);

/** \brief	Unregister functional driver from TxnQ
 * 
 * \param  hTxnQ      - The module's object
 * \param  uFuncId    - The calling functional driver
 * \return void
 * \sa     txnQ_Open
 * 
 * \par Description
 * Called by registered functional driver that uses the TxnQ to unregister.
 * Clear the function's data and destroy its queues. 
 * Perform in critical section to prevent preemption from TxnDone.
 * 
 * \sa	txnQ_Open
 */ 
void        txnQ_Close (TI_HANDLE  hTxnQ, TI_UINT32 uFuncId);

/** \brief	Restart caller's queues
 * 
 * \param  hTxnQ      - The module's object
 * \param  uFuncId    - The calling functional driver
 * \return COMPLETE if queues were restarted, PENDING if waiting for TxnDone to restart queues
 * 
 * \par Description
 * Called upon functional driver stop command or upon recovery. 
 * If no transaction in progress for the calling function, clear its queues (call the CBs). 
 * If a transaction from this function is in progress, just set state to RESTART and when 
 * called back upon TxnDone clear the queues.
 * Perform in critical section to prevent preemption from TxnDone.
 * \note   
 * The Restart applies only to the calling function's queues.
 * 
 * \sa	txnQ_ClearQueues
 */ 
ETxnStatus  txnQ_Restart (TI_HANDLE hTxnQ, TI_UINT32 uFuncId);

/** \brief	Run caller's queues
 * 
 * \param  hTxnQ   - The module's object
 * \param  uFuncId - The calling functional driver
 * \return void
 * 
 * \par Description
 * Enable TxnQ scheduler to process transactions from the calling function's queues.
 * Run scheduler to issue transactions as possible.
 * Run in critical section to protect from preemption by TxnDone.
 * 
 * \sa	txnQ_ClearQueues
 */ 
void        txnQ_Run (TI_HANDLE hTxnQ, TI_UINT32 uFuncId);

/** \brief	Stop caller's queues
 * 
 * \param  hTxnQ   - The module's object
 * \param  uFuncId - The calling functional driver
 * \return void
 * 
 * \par Description
 * Disable TxnQ scheduler to process transactions from the calling function's queues.
 * 
 * \sa
 */ 
void        txnQ_Stop (TI_HANDLE hTxnQ, TI_UINT32 uFuncId);

/** \brief	Issue a new transaction
 * 
 * \param  hTxnQ - The module's object
 * \param  pTxn  - The transaction object 
 * \return COMPLETE if input pTxn completed in this context, PENDING if not, ERROR if failed
 * 
 * \par Description
 * Called by the functional driver to initiate a new transaction.
 * In critical section save transaction and call scheduler.
 * 
 * \sa
 */ 
ETxnStatus  txnQ_Transact (TI_HANDLE hTxnQ, TTxnStruct *pTxn);

/** 
 * \fn     txnQ_ClearQueues
 * \brief  Clear the function queues
 * 
 * Clear the specified function queues and call its CB for each Txn with status=RECOVERY.
 * 
 * \note   Called in critical section.
 * \param  hTxnQ            - The module's object
 * \param  uFuncId          - The calling functional driver
 * \return void
 * \sa     
 */ 
void        txnQ_ClearQueues (TI_HANDLE hTxnQ, TI_UINT32 uFuncId);


#ifdef TI_DBG
/** \brief	Print Txn Queues
 * 
 * \param  hTxnQ - The module's object
 * \return void
 * 
 * \par Description
 * 
 * \sa
 */ 
    void txnQ_PrintQueues (TI_HANDLE hTxnQ);
#endif



#endif /*__TXN_QUEUE_API_H__*/