/*
* tiwlanhpa.h
*
* Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.
* All rights reserved.
*
* This program and the accompanying materials are made available under the
* terms of the Eclipse Public License v1.0 or BSD License which accompanies
* this distribution. The Eclipse Public License is available at
* http://www.eclipse.org/legal/epl-v10.html and the BSD License is as below.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Texas Instruments nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** \file TIWlanHpa.h
* \brief Interface between the sandbox to the BSP of Omap3430
*
* \see
*/
#ifndef _TIWLANHPA_
#define _TIWLANHPA_
#include <silicon_assp.h>
#include <gpio.h>
#include <assp.h>
#include "wlanhpa.h"
#ifdef WLAN_SDIO
#define RST_GPIO_NUM 101
#define IRQ_GPIO_NUM 162
#else //WLAN_SPI
#define RST_GPIO_NUM 3
#define IRQ_GPIO_NUM 61
#endif //WLAN_SDIO
#define RST_MOD_NUM 0
#define IRQ_MOD_NUM 0
#define ASIC_CLASS TOmap
#define ASIC_CLASS_PLAT TOmapPlat
#define PIN_TO_HANDLE OMAPGPIO_GPINID_TO_PHANDLE
#define INVALID_HANDLE KOmapGpioInvalidHandle
class TIWlanHpa : public WlanHpa
{
public:
/**
* Costructor.
*/
TIWlanHpa(MWlanOsaExt& aOsaExt, MWlanOsa& aOsa);
/**
* Destructor
*/
virtual ~TIWlanHpa();
/**
* Turns WLAN devices power on
*/
virtual void PowerOnDevice();
/**
* Turns WLAN devices power off
*/
virtual void PowerOffDevice();
/**
* Called by hpa layer object client when peripheral interrupt
* informed by OnInterrupt method has been serviced.
* NOTE: on systems implementing level sensitive interrupt handling
* host interrupt is enabled at this state
*/
virtual void InterruptServiced();
/**
* Configures the HPA layer
*/
virtual void Configure( const WlanHpa::TConfig& aConfig );
/**
* Enables Irq
*
* NOTE: usage limited to bootup sequence only.
* Untill this call the host side interrupts are disabled
*
*/
virtual void EnableIrq();
/**
* Toggles debug GPIO
* Usage limited to R&D (debug) purpose only
*/
virtual TBool DebugGpioToggle( TBool aHigh );
private:
/*
* DFC - function called by a DFC to handle the interrupt
* call another function to get in the correct class and
* therefore don't need me-> all the time
* Doesn't always work having me-> for the C software
*/
static void InterruptHandlerDfc(TAny *aPtr);
/**
* Start the DFC queue
*/
void InterruptHandlerStartDfc();
/*
* Call the actual interrupt handling routine and
* re-enable the interrupts.
*
* The interrupt handler is in the third party software
* block and performs the necessary functions
*/
void InterruptHandler();
/**
* Disables interrupts and
* unbinds the interrupt service routine.
*/
void KillInterrupts();
/**
* Sets GPIO as input line, binds it to an interrupt. Static function
* Isr() is bound to the interrupt service routine.
*
* Uses following defines:
*
* #define IRQ_GPIO_NUM 9
* #define IRQ_MOD_NUM 1
*
* of which IRQ_GPIO_NUM is the GPIO number and
* IRQ_MOD_NUM is the module number where the corresponding
* GPIO belongs to.
*/
void SetupIrqHw( WlanHpa::TIsrPolarity aPolarity);
/**
* Sets GPIO as output line. Used for controlling the PMEN signal of the WLAN chip.
#define RST_GPIO_NUM 10
#define RST_MOD_NUM 1
* of which RST_GPIO_NUM is the GPIO number and
* RST_MOD_NUM is the module number where the corresponding
* GPIO belongs to.
*/
void SetupRstHw ();
/**
* Interrupt handler function.
* Is bound to the ISR and handles continues serving the interrupt.
*
* \param aPtr HPA object context.
* \param aPinHandle is not used.
*/
static void Isr (TAny* aPtr);
/**
* Clears WLAN PMEN line.
*
*/
void EnterReset();
/**
* Sets WLAN PMEN line.
*
*/
void ExitReset();
/**
* Disables WLAN interrupt notification.
*
*/
void Disable();
/**
* Enables WLAN interrupt notification.
*
*/
void Enable();
private:
TDfc iIrqDfc;
WlanHpa::TConfig iConfig;
};
#endif //_TIWLANHPA_