--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/camerauis/cameraxui/cxengine/tsrc/unit/unittest_cxememorymonitor/hal_data.h Tue Aug 31 15:03:46 2010 +0300
@@ -0,0 +1,1363 @@
+// Copyright (c) 1995-2010 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of the License "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// hal\inc\hal_data.h
+// This is a test version of the header, for testing purposes only
+//
+
+
+#ifndef __HAL_DATA_H__
+#define __HAL_DATA_H__
+#define bitmask enum
+
+class HALData
+/**
+@publishedPartner
+@released
+
+Sets of attributes and values used by HAL functions.
+*/
+ {
+public:
+ /**
+ A set of enumerators that identifies hardware attributes.
+ The enumerators are passed to HAL::Get() and HAL::Set().
+
+ They are also used by the HAL accessor functions.
+
+ Note: It is not recommended to use HAL attributes to pass handles from the
+ kernel to user-side clients due to resource overhead's that will affect
+ existing clients of HAL. HAL is designed to allow simply hardware parameters
+ to be shared with user-side clients without resource allocation overheads.
+
+ @see HAL::Get()
+ @see HAL::Set()
+ */
+ enum TAttribute
+ {
+ /**
+ Identifies the manufacturer of a device.
+ If this is not enumerated in TManufacturer, then the manufacturer must
+ obtain a value from the Symbian registry.
+
+ @see HALData::TManufacturer
+ */
+ EManufacturer,
+
+
+ /**
+ The device specific hardware version number, as defined by
+ the device manufacturer.
+ */
+ EManufacturerHardwareRev,
+
+
+ /**
+ The device specific version number, as defined by
+ the device manufacturer.
+ */
+ EManufacturerSoftwareRev,
+
+
+ /**
+ The device specific software version number, as defined by
+ the device manufacturer.
+ */
+ EManufacturerSoftwareBuild,
+
+
+ /**
+ The device specific model number, as defined by
+ the device manufacturer.
+ */
+ EModel,
+
+
+ /**
+ This is the device specific UID, It is unique to the class /model
+ of device. A value must be obtained from Symbian's UID registry for
+ this attribute.
+ */
+ EMachineUid,
+
+
+ /**
+ The Symbian OS specified device family identifier.
+ If the device family is not one of those enumerated by TDeviceFamily,
+ then the licensee must obtain a UID from Symbian for this attribute.
+
+ @see HALData::TDeviceFamily
+ */
+ EDeviceFamily,
+
+
+ /**
+ The Symbian OS specified device family version.
+ */
+ EDeviceFamilyRev,
+
+
+ /**
+ The CPU architecture used by this device. The values are enumerated
+ by TCPU.
+
+ @see HALData::TCPU
+ */
+ ECPU,
+
+
+ /**
+ A revision number for the CPU architecture.
+ */
+ ECPUArch,
+
+
+ /**
+ This is the default ABI used by CPU for user applications.
+ The values are enumerated by HALData::TCPUABI.
+ */
+ ECPUABI,
+
+
+ /**
+ The processor speed in KHz.
+ */
+ ECPUSpeed,
+
+
+ /**
+ The reason for most recent system boot.
+ This is dynamic and readonly; the values are enumerated by
+ TSystemStartupReason.
+
+ @see HALData::TSystemStartupReason
+ */
+ ESystemStartupReason,
+
+
+ /**
+ This is the last exception code, in the case of system reboot.
+ This is dynamic and readonly.
+ */
+ ESystemException,
+
+
+ /**
+ The time between system ticks, in microseconds.
+ */
+ ESystemTickPeriod,
+
+
+ /**
+ The total system RAM, in bytes.
+ */
+ EMemoryRAM,
+
+
+ /**
+ The currently free system RAM.
+
+ This is dynamic and readonly.
+ */
+ EMemoryRAMFree,
+
+
+ /**
+ The total System ROM, in bytes.
+ */
+ EMemoryROM,
+
+
+ /**
+ The MMU page size in bytes.
+ */
+ EMemoryPageSize,
+
+
+ /**
+ Indicates the state of the power supply.
+
+ It has the values:
+ 1 = Power is good (i.e. external power is available,
+ or the 'power' battery is >= low);
+ 0 = otherwise.
+
+ This is dynamic and readonly.
+ */
+ EPowerGood,
+
+
+ /**
+ The System (or 'Main') battery power level.
+ The allowable values are enumerated by TPowerBatteryStatus
+
+ This is dynamic and readonly,
+
+ @see HALData::TPowerBatteryStatus
+ */
+ EPowerBatteryStatus,
+
+
+ /**
+ Indicates whether a backup power supply is available.
+ It has the values:
+ 0 = the device does not support (or need) a backup battery source;
+ 1 = a backup batter source is present.
+ This is dynamic and readonly
+ */
+ EPowerBackup,
+
+
+ /**
+ The power level for backup power.
+
+ It has the values enumerated by TPowerBackupStatus.
+
+ This is dynamic and readonly.
+
+ @see HALData::TPowerBackupStatus
+ */
+ EPowerBackupStatus,
+
+
+ /**
+ Indicates the state of the external power.
+
+ It has the values:
+ 0 = external power is not in use;
+ 1 = external power is in use.
+
+ This is dynamic and readonly.
+ */
+ EPowerExternal,
+
+
+ /**
+ A bitmask that describes the available keyboard types (it may support
+ more than one).
+
+ @see HALData::TKeyboard
+ */
+ EKeyboard,
+
+
+ /**
+ */
+ EKeyboardDeviceKeys,
+
+
+ /**
+ */
+ EKeyboardAppKeys,
+
+
+ /**
+ Indicates whether the device can produce a click sound for
+ each keypress.
+
+ It has the values:
+ 0 = the device cannot produce a click sound for each keypress;
+ 1 = the device can produce a click sound.
+ */
+ EKeyboardClick,
+
+
+ /**
+ The state of keyboard clicking.
+
+ It has the values:
+ 0 = key click disabled;
+ 1 = key click enabled.
+
+ This is dynamic and writeable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EKeyboardClickState,
+
+
+ /**
+ The keyboard click volume level.
+
+ It can take a value in the range 0 to EKeyboardClickVolumeMax.
+
+ This is dynamic and writeable.
+
+ @see HALData::EKeyboardClickVolumeMax
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EKeyboardClickVolume,
+
+
+ /**
+ The maximum value for EKeyboardClickVolume.
+
+ @see HALData::EKeyboardClickVolume
+ */
+ EKeyboardClickVolumeMax,
+
+
+ /**
+ The screen horizontal dimension in pixels.
+ */
+ EDisplayXPixels,
+
+
+ /**
+ The screen vertical dimension in pixels.
+ */
+ EDisplayYPixels,
+
+
+ /**
+ The screen horizontal dimension in twips.
+ */
+ EDisplayXTwips,
+
+
+ /**
+ The screen vertical dimension in twips.
+ */
+ EDisplayYTwips,
+
+
+ /**
+ The number of hues (colors or shades of grey) displayable on
+ the screen.
+ */
+ EDisplayColors,
+
+
+ /**
+ The state of the display.
+
+ It has the values:
+ 0 = screen is turned off;
+ 1 = screen is on.
+
+ This is dynamic and writeable.
+
+ @capability PowerMgmt needed to Set this attribute
+ */
+ EDisplayState,
+
+
+ /**
+ The screen contrast level.
+ It can take a value in the range 0 to EDisplayContrastMax.
+
+ This is dynamic and writeable
+
+ @see HALData::EDisplayContrastMax
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EDisplayContrast,
+
+
+ /**
+ The maximum value for EDisplayContrast
+
+ @see HALData::EDisplayContrast
+ */
+ EDisplayContrastMax,
+
+
+ /**
+ Indicates whether there is a backlight on the device.
+
+ It has the values:
+ 0 = there is no screen backlight;
+ 1 = a screen backlight is present.
+ */
+ EBacklight,
+
+
+ /**
+ The current status of the backlight.
+
+ It has the values:
+ 0 = off;
+ 1 = on.
+
+ This is dynamic and writeable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EBacklightState,
+
+
+ /**
+ Indicates whether a pen or digitizer is available for input.
+
+ It has the values:
+ 0 = a pen/digitizer is not available for input;
+ 1 = a pen/digitizeris present.
+ */
+ EPen,
+
+
+ /**
+ The pen/digitizer horizontal resolution, in pixels.
+ */
+ EPenX,
+
+
+ /**
+ The pen/digitizer vertical resolution, in pixels.
+ */
+ EPenY,
+
+
+ /**
+ Indicates whether a pen tap will turn the display on.
+
+ It has the values:
+ 0 = a pen tap has no effect;
+ 1 = a pent tap or press enables the display.
+
+ This is dynamic and writeable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EPenDisplayOn,
+
+
+ /**
+ Indicates whether the device can produce a click sound for
+ each pen tap.
+
+ It has the values:
+ 0 = the device cannot produce a click sound
+ 1 = production of a click sound is supported by the device.
+ */
+ EPenClick,
+
+
+ /**
+ The state of pen clicking.
+
+ It has the values:
+ 0 = pen clicking is disabled;
+ 1 = pen clicking is enabled.
+
+ This is dynamic and writable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EPenClickState,
+
+
+ /**
+ The pen click volume level.
+ It can take a value in the range 0 to EPenClickVolumeMax.
+
+ This value is dynamic and writable.
+
+ @see HALData::EPenClickVolumeMax
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EPenClickVolume,
+
+
+ /**
+ The maximum value for EPenClickVolume.
+
+ @see HALData::EPenClickVolume
+ */
+ EPenClickVolumeMax,
+
+
+ /**
+ Indicates whether a mouse is available for input.
+
+ It has the values:
+ 0 = there is no mouse available pen/digitizer is present;
+ 1 = a mouse is available for input.
+ */
+ EMouse,
+
+
+ /**
+ The mouse horizontal resolution, in pixels.
+ */
+ EMouseX,
+
+
+ /**
+ The mouse vertical resolution, in pixels.
+ */
+ EMouseY,
+
+
+ /**
+ Describes the mouse cursor visibility.
+
+ The value is enumerated by TMouseState.
+
+ This is dynamic and writable.
+ @see HALData::TMouseState
+
+ @capability MultimediaDD needed to Set this attribute
+ */
+ EMouseState,
+
+
+ /**
+ Reserved for future use.
+ @capability MultimediaDD needed to Set this attribute
+ */
+ EMouseSpeed,
+
+
+ /**
+ Reserved for future use.
+ @capability MultimediaDD needed to Set this attribute
+ */
+ EMouseAcceleration,
+
+
+ /**
+ The number of buttons on the mouse.
+ */
+ EMouseButtons,
+
+
+ /**
+ A bitmask defining the state of each button.
+
+ For each bit, it has values:
+ 0 = up;
+ 1 = down.
+
+ This is dynamic and read only.
+ */
+ EMouseButtonState,
+
+
+ /**
+ Defines the state of the case.
+
+ It has the values:
+ 0 = case closed;
+ 1 = case opened.
+
+ This is dynamic and read only.
+ */
+ ECaseState,
+
+
+ /**
+ Indicates whether the device has a case switch, that actions when
+ the case opens and closes.
+
+ It has values:
+ 0 = no;
+ 1 = yes.
+ */
+ ECaseSwitch,
+
+
+ /**
+ Indicates whether the device is to switch on when case opens.
+
+ It has the values:
+ 0 = disable device switchon when the case opens;
+ 1 = enable device switchon when the case opens.
+
+ This is dynamic and writeable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ ECaseSwitchDisplayOn,
+
+
+ /**
+ Indicates whether the device is to switch off when case close.
+
+ It has the values:
+ 0 = disable device switchoff when the case closes;
+ 1 = enable device switchoff when the case closes.
+
+ This is dynamic and writeable.
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ ECaseSwitchDisplayOff,
+
+
+ /**
+ The number of LEDs on the device.
+ */
+ ELEDs,
+
+
+ /**
+ A bitmask defining the state of each LED.
+
+ For each bit, it has values:
+ 0 = off;
+ 1 = on.
+
+ This is dynamic and writeable.
+ */
+ ELEDmask,
+
+
+ /**
+ Indicates how the phone hardware is connected.
+
+ It has the values:
+ 0 = phone hardware is not permanently connected;
+ 1 = phone hardware is permanently connected.
+ */
+ EIntegratedPhone,
+
+
+ /**
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EDisplayBrightness,
+
+
+ /**
+ */
+ EDisplayBrightnessMax,
+
+
+ /**
+ Indicates the state of the keyboard backlight.
+
+ It has the values:
+ 0 = keyboard backlight is off;
+ 1 = keyboard backlight is on.
+
+ This is dynamic and writeable.
+
+ @capability PowerMgmt needed to Set this attribute
+ */
+ EKeyboardBacklightState,
+
+
+ /**
+ Power supply to an accessory port.
+
+ It has the values:
+ 0 = turn off power to an accessory port on the device;
+ 1 = turn on power.
+
+ This is dynamic and writeable.
+
+ @capability PowerMgmt needed to Set this attribute
+ */
+ EAccessoryPower,
+
+
+ /**
+ A 2 decimal digit language index.
+
+ It is used as the two digit language number that is the suffix of
+ language resource DLLs, e.g ELOCL.01.
+
+ The locale with this language index is loaded the next time that
+ the device boots.
+
+ This is dynamic and writeable.
+
+ @see TLanguage
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ ELanguageIndex,
+
+
+ /**
+ A 2 decimal digit (decimal) language keyboard index.
+ It is used as the two digit language number that is the suffix of
+ language resource DLLs, e.g. EKDATA.01.
+
+ @see TLanguage
+
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EKeyboardIndex,
+
+
+ /**
+ The maximum allowable size of RAM drive, in bytes.
+ */
+ EMaxRAMDriveSize,
+
+
+ /**
+ Indicates the state of the keyboard.
+
+ It has the values:
+ 0 = keyboard is disabled;
+ 1 = Keyboard is enabled.
+
+ This is dynamic and writeable.
+
+ @capability PowerMgmt needed to Set this attribute
+ */
+ EKeyboardState,
+
+ /**
+ Defines the system drive & custom resource drive.
+ Legacy attribute which is no longer supported.
+
+ @deprecated Attribute is no longer the primary mechanism to define the
+ System Drive or the Custom Resource Drive.
+ @see RFs::GetSystemDrive.
+ @see BaflUtils::NearestLanguageFile
+ @see HALData::ECustomResourceDrive
+ */
+ ESystemDrive,
+
+ /**
+ Indicates the state of the pen or digitiser.
+
+ It has the values:
+ 1 = pen/digitiser is enabled;
+ 0 = pen/digitiser is disabled.
+
+ This is dynamic and writeable.
+
+ @capability PowerMgmt needed to Set this attribute
+ */
+ EPenState,
+
+
+ /**
+ On input: aInOut contains the mode number.
+ On output: aInOut contains: 0 = display is colour;
+ 1 = display is black & white.
+
+ aInOut is the 3rd parameter passed to accessor functions
+ for derived attributes.
+ */
+ EDisplayIsMono,
+
+
+ /**
+ On input: aInOut contains the mode number;
+ On output, aInOut contains: 0 = display is not palettised;
+ 1 = display is palettised.
+
+ aInOut is the 3rd parameter passed to accessor functions
+ for derived attributes.
+ */
+ EDisplayIsPalettized,
+
+
+ /**
+ The display bits per pixel.
+
+ On input, aInOut contains the mode number.
+ On output, aInOut contains the bits per pixel for that mode.
+
+ aInOut is the 3rd parameter passed to accessor functions
+ for derived attributes.
+
+ It is read only data.
+ */
+ EDisplayBitsPerPixel,
+
+
+ /**
+ The number of display modes available.
+ */
+ EDisplayNumModes,
+
+
+ /**
+ The address of the display memory.
+ */
+ EDisplayMemoryAddress,
+
+
+ /**
+ The offset, in bytes, to the pixel area of the screen from the start of screen memory.
+
+ This is used to account for the fact that the palette is sometimes at
+ the beginning of the display memory.
+
+ On input, aInOut contains the mode number.
+ On output, aInOut contains the offset to the first pixel for that mode.
+
+ aInOut is the 3rd parameter passed to accessor functions
+ for derived attributes.
+ */
+ EDisplayOffsetToFirstPixel,
+
+
+ /**
+ The separation, in bytes, of successive lines of display in memory.
+
+ On input, aInOut contains the mode number.
+ On output, aInOut contains the display offset between lines.
+
+ aInOut is the 3rd parameter passed to accessor functions
+ for derived attributes.
+ */
+ EDisplayOffsetBetweenLines,
+
+
+ /**
+ @capability MultimediaDD needed to Set this attribute
+ */
+ EDisplayPaletteEntry,
+
+
+ /**
+ It has the values:
+ 1 = order of pixels in display is RGB;
+ 0 = otherwise.
+ */
+ EDisplayIsPixelOrderRGB,
+
+
+ /**
+ It has the values:
+ 1 = pixel order is landscape;
+ 0 = pixel order is portrait.
+ */
+ EDisplayIsPixelOrderLandscape,
+
+
+ /**
+ This indicates or sets the current display mode where
+ EDisplayNumModes-1 is the maximum value for the display mode.
+ The properties of a particular display mode are entirely defined by
+ the base port software associated with the hardware upon which the OS
+ is running.
+
+ @capability MultimediaDD needed to Set this attribute
+ */
+ EDisplayMode,
+
+
+ /**
+ If the target hardware upon which Symbian OS is running has switches
+ which can be read by the base port software, this interface allows
+ the current status of those switches to be read.
+ */
+ ESwitches,
+
+
+ /**
+ The port number of the debug port.
+ */
+ EDebugPort,
+
+
+ /**
+ The language code of the Locale which was loaded at device boot time.
+
+ This is dynamic and writeable.
+
+ @see ELanguageIndex
+
+ @capability WriteSystemData needed to Set this attribute
+ */
+ ELocaleLoaded,
+
+
+ /**
+ The drive number to use for storage of Clipboard data.
+ 0 = Drive A, 1 = Drive B, etc...
+ */
+ EClipboardDrive,
+
+ /**
+ Custom restart
+ @capability PowerMgmt
+ */
+ ECustomRestart,
+
+ /**
+ Custom restart reason
+ */
+ ECustomRestartReason,
+
+ /**
+ The number of screens.
+ */
+ EDisplayNumberOfScreens,
+
+ /**
+ The time between nanokernel ticks, in microseconds.
+ */
+ ENanoTickPeriod,
+
+ /**
+ The frequency of the fast counter.
+ */
+ EFastCounterFrequency,
+
+ /**
+ Indicates the whether the fast counter counts up or down.
+ */
+ EFastCounterCountsUp,
+
+ /**
+ Indicates whether a 3 dimensional pointing device is available for input and Z coordinate
+ is provided in appropriate pointer-related TRawEvents generated by the driver.
+
+ It has the values:
+ 0 = a 3D pointer is not available for input and Z coordinate is not provided in TRawEvents;
+ 1 = a 3D pointer is present and Z coordinate is provided in TRawEvents.
+ */
+ EPointer3D,
+
+ /**
+ The furthest detectable 3D pointing device's proximity above the screen.
+ As proximity values above the screen are negative, this will be a negative value.
+
+ This is dynamic and writeable.
+ */
+ EPointer3DMaxProximity,
+
+ /**
+ Indicates whether a 3 dimensional pointing device supports Theta polar angle reading.
+
+ It has the values:
+ 0 = a 3D pointer does not support Theta polar angle reading;
+ 1 = a 3D pointer supports Theta polar angle reading.
+ */
+ EPointer3DThetaSupported,
+
+ /**
+ Indicates whether a 3 dimensional pointing device supports Phi polar angle reading.
+
+ It has the values:
+ 0 = a 3D pointer does not support Phi polar angle reading;
+ 1 = a 3D pointer supports Phi polar angle reading.
+ */
+ EPointer3DPhiSupported,
+
+ /**
+ Indicates whether a 3 dimensional pointing device supports rotation angle along its main axis reading.
+
+ It has the values:
+ 0 = a 3D pointer does not support alpha (rotation) reading;
+ 1 = a 3D pointer supports alpha (rotation) reading.
+ */
+ EPointer3DRotationSupported,
+
+ /**
+ Indicates whether a 3 dimensional pointing device supports readings of pressure applied on screen.
+
+ It has the values:
+ 0 = a 3D pointer does not support pressure reading;
+ 1 = a 3D pointer supports pressure reading.
+ */
+ EPointer3DPressureSupported,
+
+ /**
+ Indicates whether hardware floating point is available, and what type.
+
+ If no hardware floating point is available, reading this attribute will return KErrNotSupported.
+ If hardware floating point is available, reading this attribute will return KErrNone and the type
+ available. These types are specified in TFloatingPointType.
+ */
+ EHardwareFloatingPoint,
+
+ /**
+ The offset between secure and nonsecure clocks. If this attribute is undefined no secure clock
+ will be available.
+ */
+ ETimeNonSecureOffset,
+
+ /**
+ Persist startup mode.
+
+ If no variant specific implementation exists, the startup mode will be stored in platform
+ specific values.hda file.
+ */
+ EPersistStartupModeKernel,
+
+ /**
+ Maximum restart reasons.
+
+ Returns the maximum number of values that can be used to store the restart reason required for a custom restart.
+ */
+ EMaximumCustomRestartReasons,
+
+ /**
+ Maximum startup modes.
+
+ Returns the maximum number of values that can be used to store the startup mode requires for a system restart.
+ */
+ EMaximumRestartStartupModes,
+
+ /**
+ Defines the custom resource drive.
+
+ This drive attribute should be set if an additional drive is required for use in the search
+ algorithm for language files.
+
+ @see TDriveNumber
+ @see BaflUtils::NearestLanguageFile for how this attribute is used
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ ECustomResourceDrive,
+
+ /**
+ Step size of Z distance data.
+
+ Returns the minimum size of the step between two resolvable z positions
+ */
+ EPointer3DProximityStep,
+
+ /**
+ Maximum Number of Pointers supported by hardware/driver
+
+ Returns the maximum number of pointers for a touch configuration (or KErrNotSupported or 0)
+ */
+ EPointerMaxPointers,
+
+ /**
+ Maximum Number of Pointers
+
+ Sets and reads back the number of pointers as requested by the UI (<=EPointerMaxPointers)
+ */
+ EPointerNumberOfPointers,
+
+ /**
+ Maximum Pressure Value
+
+ Returns the maximum pressure value
+ */
+ EPointer3DMaxPressure,
+
+ /**
+ Step size of pressure data.
+
+ Returns the minimum size of the step between two resolvable pressure readings
+ */
+ EPointer3DPressureStep,
+
+ /**
+ The threshold on pointer's Z coordinate above which EEnterHighPressure pointer event is sent to WSERV's clients.
+ This value is intended to be preconfigured in build time and modified by Window Server only
+
+ @prototype 9.5
+ */
+ EPointer3DEnterHighPressureThreshold,
+
+ /**
+ The threshold on pointer's Z coordinate below which EExitHighPressure pointer event is sent to WSERV's clients.
+ This value is intended to be preconfigured in build time and modified by Window Server only
+
+ @prototype 9.5
+ */
+ EPointer3DExitHighPressureThreshold,
+
+ /**
+ The threshold on pointer's Z coordinate above which EEnterCloseProximity pointer event is sent to WSERV's clients.
+ This value is intended to be preconfigured in build time and modified by Window Server only
+
+ @prototype 9.5
+ */
+ EPointer3DEnterCloseProximityThreshold,
+
+
+ /**
+ The threshold on pointer's Z coordinate below which EExitCloseProximity pointer event is sent to WSERV's clients.
+ This value is intended to be preconfigured in build time and modified by Window Server only
+
+ @prototype 9.5
+ */
+ EPointer3DExitCloseProximityThreshold,
+
+ /**
+ A Handle to the display memory.
+ This attribute opens a chunk, the client is responsible for closing it.
+ Using HAL attribtues to open handles is not recommended and this
+ attribute may be removed in the future.
+
+ @prototype 9.5
+ */
+ EDisplayMemoryHandle,
+
+ /**
+ Serial number of this board
+ */
+ ESerialNumber,
+
+
+ /**
+ Interrupt used by sampling profiler - applicable for SMP only. Each CPU_i is interrupted by interrupt number ECpuProfilingInterrupt + i
+ */
+ ECpuProfilingDefaultInterruptBase,
+
+
+ /**
+ Number of processors present on the device. Returns 1 on unicore. This number is constant and does not take account of power management
+ */
+ ENumCpus,
+
+ /**
+ The orientation of the Digitiser. Usually mirrors device orientation.
+
+ @see TDigitiserOrientation for allowed values
+ @capability WriteDeviceData needed to Set this attribute
+ */
+ EDigitiserOrientation,
+
+ /*
+ * NOTE:
+ * When updating this list, please also update hal/rom/hal.hby and hal/tsrc/t_newhal.cpp.
+ */
+
+ /**
+
+ The number of HAL attributes per screen.
+
+ It is simply defined by its position in the enumeration.
+ */
+ ENumHalAttributes
+
+ };
+
+
+
+ /**
+ Defines properties for the hardware attributes.
+
+ @see HALData::TAttribute
+ */
+ enum TAttributeProperty
+ {
+ /**
+ When set, means that an attribute is meaningful on this device.
+
+ @see HAL::Get()
+ @see HAL::Set()
+ */
+ EValid=0x1,
+
+
+ /**
+ When set, means that an attribute is modifiable.
+ A call to HAL::Set() for an attribute that does not have this property,
+ returns KErrNotSupported.
+
+ @see HAL::Get()
+ @see HAL::Set()
+ */
+ ESettable=0x2,
+ };
+
+
+
+ /**
+ UIDs for a defined set of device manufacturers.
+
+ Note that any manufacturer not represented in this list must obtain
+ a value from the Symbian registry.
+
+ @see HALData::TAttribute
+ */
+ enum TManufacturer // UID for manufacturer
+ {
+ EManufacturer_Ericsson=0x00000000,
+ EManufacturer_Motorola=0x00000001,
+ EManufacturer_Nokia=0x00000002,
+ EManufacturer_Panasonic=0x00000003,
+ EManufacturer_Psion=0x00000004,
+ EManufacturer_Intel=0x00000005,
+ EManufacturer_Cogent=0x00000006,
+ EManufacturer_Cirrus=0x00000007,
+ EManufacturer_Linkup=0x00000008,
+ EManufacturer_TexasInstruments=0x00000009,
+ // New manufacturers must obtain an official UID to identify themselves
+ };
+
+
+
+ /**
+ Defines the Symbian OS device families.
+
+ @see HALData::TAttribute
+ */
+ enum TDeviceFamily
+ {
+ EDeviceFamily_Crystal,
+ EDeviceFamily_Pearl,
+ EDeviceFamily_Quartz,
+ };
+
+
+
+ /**
+ Defines the set of CPU architectures.
+
+ @see HALData::TAttribute
+ */
+ enum TCPU
+ {
+ ECPU_ARM,
+ ECPU_MCORE,
+ ECPU_X86,
+ };
+
+
+
+ /**
+ Defines the set of ABIs used by the CPU for user applications.
+
+ @see HALData::TAttribute
+ */
+ enum TCPUABI
+ {
+ ECPUABI_ARM4,
+ ECPUABI_ARMI,
+ ECPUABI_THUMB,
+ ECPUABI_MCORE,
+ ECPUABI_MSVC,
+ ECPUABI_ARM5T,
+ ECPUABI_X86,
+ };
+
+
+
+ /**
+ Defines the set of reasons for a system boot.
+
+ @see HALData::TAttribute
+ */
+ enum TSystemStartupReason
+ {
+ ESystemStartupReason_Cold,
+ ESystemStartupReason_Warm,
+ ESystemStartupReason_Fault,
+ };
+
+
+
+ /**
+ Defines the set of available keyboard types.
+
+ @see HALData::TAttribute
+ */
+ bitmask TKeyboard
+ {
+ EKeyboard_Keypad=0x1,
+ EKeyboard_Full=0x2,
+ };
+
+
+
+ /**
+ Defines the mouse cursor visibility.
+
+ @see HALData::TAttribute
+ */
+ enum TMouseState
+ {
+ EMouseState_Invisible=0,
+ EMouseState_Visible=1,
+ };
+
+
+
+ /**
+ Defines a set of UIDs for specific devices, reference boards etc
+
+ @see HALData::TAttribute
+ */
+ enum TMachineUid
+ {
+ EMachineUid_Series5mx=0x1000118a,
+ EMachineUid_Brutus=0x10005f60,
+ EMachineUid_Cogent=0x10005f61,
+ EMachineUid_Win32Emulator=0x10005f62,
+ EMachineUid_WinC=0x10005f63,
+ EMachineUid_CL7211_Eval=0x1000604f,
+ EMachineUid_LinkUp=0x00000000,
+ EMachineUid_Assabet=0x100093f3,
+ EMachineUid_Zylonite=0x101f7f27,
+ EMachineUid_IQ80310=0x1000a681,
+ EMachineUid_Lubbock=0x101f7f26,
+ EMachineUid_Integrator=0x1000AAEA,
+ EMachineUid_Helen=0x101F3EE3,
+ EMachineUid_X86PC=0x100000ad,
+ EMachineUid_OmapH2=0x1020601C,
+ EMachineUid_OmapH4=0x102734E3,
+ EMachineUid_NE1_TB=0x102864F7,
+ EMachineUid_EmuBoard=0x1200afed,
+ EMachineUid_OmapH6=0x10286564,
+ EMachineUid_OmapZoom=0x10286565,
+ EMachineUid_STE8500=0x101FF810,
+ };
+
+
+
+ /**
+ Defines power levels for the system (or 'Main') battery.
+
+ @see HALData::TAttribute
+ */
+ enum TPowerBatteryStatus
+ {
+ EPowerBatteryStatus_Zero,
+ EPowerBatteryStatus_Replace,
+ EPowerBatteryStatus_Low,
+ EPowerBatteryStatus_Good,
+ };
+
+
+
+ /**
+ Defines power levels for the backup power.
+
+ @see HALData::TAttribute
+ */
+ enum TPowerBackupStatus
+ {
+ EPowerBackupStatus_Zero,
+ EPowerBackupStatus_Replace,
+ EPowerBackupStatus_Low,
+ EPowerBackupStatus_Good,
+ };
+
+
+ /**
+ Describes the orientation of the screen digitiser, usually mirrors the
+ device orientation not necessarily the display rotation as this might be
+ limited to upright and left 90 only. The values in degrees measures
+ the anti-clockwise angle from the left edge of the digitiser from the
+ normal default position of the device.
+
+ User-side clients can use attribute to inform the digitiser driver of the
+ digitiser orientation. The driver may then use this information to adjust
+ X.Y sampling depending on input pointer type.
+
+ @see HALData::TAttribute
+ */
+ enum TDigitiserOrientation
+ {
+ EDigitiserOrientation_default, ///< Driver using build-in default
+ EDigitiserOrientation_000, ///< Device normal 'make-call' position
+ EDigitiserOrientation_090, ///< Device rotated left 90 degrees
+ EDigitiserOrientation_180, ///< Device rotated 180 degrees
+ EDigitiserOrientation_270 ///< Device rotated right 90 degrees
+ };
+
+ };
+
+#endif