--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/omadmadapters/syncmldm/tsrc/init/syncmldmtest.ini Tue Jul 13 03:48:30 2010 +0530
@@ -0,0 +1,204 @@
+#
+# This is STIF initialization file
+# Comment lines start with '#'-character.
+# See STIF TestFramework users guide.doc for instructions
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Set following test engine settings:
+# - Set Test Reporting mode. TestReportMode's possible values are:
+# + 'Summary': Summary of the tested test cases.
+# + 'Environment': Hardware and software info.
+# + 'TestCases': Test case report.
+# + 'FullReport': Set of all above ones.
+# + Example 'TestReportMode= Summary TestCases'
+#
+# - CreateTestReport setting controls report creation mode
+# + YES, Test report will created.
+# + NO, No Test report.
+#
+# - File path indicates the base path of the test report.
+# - File name indicates the name of the test report.
+#
+# - File format indicates the type of the test report.
+# + TXT, Test report file will be txt type, for example 'TestReport.txt'.
+# + HTML, Test report will be html type, for example 'TestReport.html'.
+#
+# - File output indicates output source of the test report.
+# + FILE, Test report logging to file.
+# + RDEBUG, Test report logging to using rdebug.
+#
+# - File Creation Mode indicates test report overwriting if file exist.
+# + OVERWRITE, Overwrites if the Test report file exist.
+# + APPEND, Continue logging after the old Test report information if
+# report exist.
+# - Sets a device reset module's dll name(Reboot).
+# + If Nokia specific reset module is not available or it is not correct one
+# StifHWResetStub module may use as a template for user specific reset
+# module.
+# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation
+# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02
+#
+
+[Engine_Defaults]
+
+TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment',
+ 'TestCases' or 'FullReport'
+
+CreateTestReport= YES # Possible values: YES or NO
+
+TestReportFilePath= C:\LOGS\TestFramework\
+TestReportFileName= TestReport
+
+TestReportFormat= TXT # Possible values: TXT or HTML
+TestReportOutput= FILE # Possible values: FILE or RDEBUG
+TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
+
+DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting
+
+DisableMeasurement= stifmeasurementdisablenone # Possible values are:
+ # 'stifmeasurementdisablenone', 'stifmeasurementdisableall'
+ # 'stifmeasurementplugin01', 'stifmeasurementplugin02',
+ # 'stifmeasurementplugin03', 'stifmeasurementplugin04',
+ # 'stifmeasurementplugin05' or 'stifbappeaprofiler'
+
+Timeout= 0 # Default timeout value for each test case. In milliseconds
+#UITestingSupport= YES # Possible values: YES or NO
+#SeparateProcesses= YES # Possible values: YES or NO (default: NO)
+[End_Defaults]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Module configurations start
+# Modules are added between module tags
+# tags. Module name is specified after ModuleName= tag, like
+# ModuleName= XXXXXXXXX
+# Modules might have initialisation file, specified as
+# IniFile= c:\testframework\YYYYYY
+# Modules might have several configuration files, like
+# TestCaseFile= c:\testframework\NormalCases.txt
+# TestCaseFile= c:\testframework\SmokeCases.txt
+# TestCaseFile= c:\testframework\ManualCases.txt
+
+# (TestCaseFile is synonym for old term ConfigFile)
+
+# Following case specifies demo module settings. Demo module
+# does not read any settings from file, so tags
+# IniFile and TestCaseFile are not used.
+# In the simplest case it is enough to specify only the
+# name of the test module when adding new test module
+
+#[New_Module]
+#ModuleName= demomodule
+#[End_Module]
+
+
+[New_Module]
+ModuleName= testscripter
+#DM
+TestCaseFile= c:\testframework\syncmldmtest.cfg
+[End_Module]
+
+
+# Load testmoduleXXX, optionally with initialization file and/or test case files
+#[New_Module]
+#ModuleName= testmodulexxx
+
+#TestModuleXXX used initialization file
+#IniFile= c:\testframework\init.txt
+
+#TestModuleXXX used configuration file(s)
+#TestCaseFile= c:\testframework\testcases1.cfg
+#TestCaseFile= c:\testframework\testcases2.cfg
+#TestCaseFile= c:\testframework\manualtestcases.cfg
+
+#[End_Module]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Set STIF logging overwrite parameters for Logger.
+# Hardware and emulator environment logging path and styles can
+# be configured from here to overwrite the Logger's implemented values.
+#
+# Settings description:
+# - Indicates option for creation log directory/directories. If log directory/directories
+# is/are not created by user they will make by software.
+# + YES, Create log directory/directories if not allready exist.
+# + NO, Log directory/directories not created. Only created one is used.
+#
+# - Overwrite emulator path setting.
+# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined
+# Logger's path 'D:\\LOGS\\Module\\' with those definition the path
+# will be 'C:\LOGS\TestFramework\LOGS\Module\'
+#
+# - Overwrite emulator's logging format.
+# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'.
+# + HTML, Log file(s) will be html type(s), for example 'Module.html'.
+#
+# - Overwrited emulator logging output source.
+# + FILE, Logging to file(s).
+# + RDEBUG, Logging to using rdebug(s).
+#
+# - Overwrite hardware path setting (Same description as above in emulator path).
+# - Overwrite hardware's logging format(Same description as above in emulator format).
+# - Overwrite hardware's logging output source(Same description as above in emulator output).
+#
+# - File Creation Mode indicates file overwriting if file exist.
+# + OVERWRITE, Overwrites if file(s) exist.
+# + APPEND, Continue logging after the old logging information if file(s) exist.
+#
+# - Will thread id include to the log filename.
+# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'.
+# + NO, No thread id to log file(s), Example filename 'Module.txt'.
+#
+# - Will time stamps include the to log file.
+# + YES, Time stamp added to each line in log file(s). Time stamp is
+# for example'12.Nov.2003 115958 LOGGING INFO'
+# + NO, No time stamp(s).
+#
+# - Will line breaks include to the log file.
+# + YES, Each logging event includes line break and next log event is in own line.
+# + NO, No line break(s).
+#
+# - Will event ranking include to the log file.
+# + YES, Event ranking number added to each line in log file(s). Ranking number
+# depends on environment's tics, for example(includes time stamp also)
+# '012 12.Nov.2003 115958 LOGGING INFO'
+# + NO, No event ranking.
+#
+# - Will write log file in unicode format.
+# + YES, Log file will be written in unicode format
+# + NO, Log will be written as normal, not unicode, file.
+#
+
+[Logger_Defaults]
+
+#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#'
+#NOTE: TestEngine and TestServer logging settings cannot change here
+
+#CreateLogDirectories= YES # Possible values: YES or NO
+
+#EmulatorBasePath= C:\LOGS\TestFramework\
+#EmulatorFormat= HTML # Possible values: TXT or HTML
+#EmulatorOutput= FILE # Possible values: FILE or RDEBUG
+
+#HardwareBasePath= D:\LOGS\TestFramework\
+#HardwareFormat= HTML # Possible values: TXT or HTML
+#HardwareOutput= FILE # Possible values: FILE or RDEBUG
+
+#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
+
+#ThreadIdToLogFile= YES # Possible values: YES or NO
+#WithTimeStamp= YES # Possible values: YES or NO
+#WithLineBreak= YES # Possible values: YES or NO
+#WithEventRanking= YES # Possible values: YES or NO
+
+#FileUnicode= YES # Possible values: YES or NO
+#AddTestCaseTitle= YES # Possible values: YES or NO
+[End_Logger_Defaults]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+# End of file