--- a/deviceupdatesui/adapters/syncmldm12/tsrc/init/syncmldm12test.ini Fri Jun 11 16:23:35 2010 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,204 +0,0 @@
-#
-# This is STIF initialization file
-# Comment lines start with '#'-character.
-# See STIF TestFramework users guide.doc for instructions
-
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-# Set following test engine settings:
-# - Set Test Reporting mode. TestReportMode's possible values are:
-# + 'Summary': Summary of the tested test cases.
-# + 'Environment': Hardware and software info.
-# + 'TestCases': Test case report.
-# + 'FullReport': Set of all above ones.
-# + Example 'TestReportMode= Summary TestCases'
-#
-# - CreateTestReport setting controls report creation mode
-# + YES, Test report will created.
-# + NO, No Test report.
-#
-# - File path indicates the base path of the test report.
-# - File name indicates the name of the test report.
-#
-# - File format indicates the type of the test report.
-# + TXT, Test report file will be txt type, for example 'TestReport.txt'.
-# + HTML, Test report will be html type, for example 'TestReport.html'.
-#
-# - File output indicates output source of the test report.
-# + FILE, Test report logging to file.
-# + RDEBUG, Test report logging to using rdebug.
-#
-# - File Creation Mode indicates test report overwriting if file exist.
-# + OVERWRITE, Overwrites if the Test report file exist.
-# + APPEND, Continue logging after the old Test report information if
-# report exist.
-# - Sets a device reset module's dll name(Reboot).
-# + If Nokia specific reset module is not available or it is not correct one
-# StifHWResetStub module may use as a template for user specific reset
-# module.
-# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation
-# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02
-#
-
-[Engine_Defaults]
-
-TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment',
- 'TestCases' or 'FullReport'
-
-CreateTestReport= YES # Possible values: YES or NO
-
-TestReportFilePath= C:\LOGS\TestFramework\
-TestReportFileName= TestReport
-
-TestReportFormat= TXT # Possible values: TXT or HTML
-TestReportOutput= FILE # Possible values: FILE or RDEBUG
-TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
-
-DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting
-
-DisableMeasurement= stifmeasurementdisablenone # Possible values are:
- # 'stifmeasurementdisablenone', 'stifmeasurementdisableall'
- # 'stifmeasurementplugin01', 'stifmeasurementplugin02',
- # 'stifmeasurementplugin03', 'stifmeasurementplugin04',
- # 'stifmeasurementplugin05' or 'stifbappeaprofiler'
-
-Timeout= 0 # Default timeout value for each test case. In milliseconds
-#UITestingSupport= YES # Possible values: YES or NO
-#SeparateProcesses= YES # Possible values: YES or NO (default: NO)
-[End_Defaults]
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-
-
-
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-# Module configurations start
-# Modules are added between module tags
-# tags. Module name is specified after ModuleName= tag, like
-# ModuleName= XXXXXXXXX
-# Modules might have initialisation file, specified as
-# IniFile= c:\testframework\YYYYYY
-# Modules might have several configuration files, like
-# TestCaseFile= c:\testframework\NormalCases.txt
-# TestCaseFile= c:\testframework\SmokeCases.txt
-# TestCaseFile= c:\testframework\ManualCases.txt
-
-# (TestCaseFile is synonym for old term ConfigFile)
-
-# Following case specifies demo module settings. Demo module
-# does not read any settings from file, so tags
-# IniFile and TestCaseFile are not used.
-# In the simplest case it is enough to specify only the
-# name of the test module when adding new test module
-
-#[New_Module]
-#ModuleName= demomodule
-#[End_Module]
-
-
-[New_Module]
-ModuleName= testscripter
-#DM
-TestCaseFile= c:\testframework\syncmldm12test.cfg
-[End_Module]
-
-
-# Load testmoduleXXX, optionally with initialization file and/or test case files
-#[New_Module]
-#ModuleName= testmodulexxx
-
-#TestModuleXXX used initialization file
-#IniFile= c:\testframework\init.txt
-
-#TestModuleXXX used configuration file(s)
-#TestCaseFile= c:\testframework\testcases1.cfg
-#TestCaseFile= c:\testframework\testcases2.cfg
-#TestCaseFile= c:\testframework\manualtestcases.cfg
-
-#[End_Module]
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-
-
-
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-# Set STIF logging overwrite parameters for Logger.
-# Hardware and emulator environment logging path and styles can
-# be configured from here to overwrite the Logger's implemented values.
-#
-# Settings description:
-# - Indicates option for creation log directory/directories. If log directory/directories
-# is/are not created by user they will make by software.
-# + YES, Create log directory/directories if not allready exist.
-# + NO, Log directory/directories not created. Only created one is used.
-#
-# - Overwrite emulator path setting.
-# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined
-# Logger's path 'D:\\LOGS\\Module\\' with those definition the path
-# will be 'C:\LOGS\TestFramework\LOGS\Module\'
-#
-# - Overwrite emulator's logging format.
-# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'.
-# + HTML, Log file(s) will be html type(s), for example 'Module.html'.
-#
-# - Overwrited emulator logging output source.
-# + FILE, Logging to file(s).
-# + RDEBUG, Logging to using rdebug(s).
-#
-# - Overwrite hardware path setting (Same description as above in emulator path).
-# - Overwrite hardware's logging format(Same description as above in emulator format).
-# - Overwrite hardware's logging output source(Same description as above in emulator output).
-#
-# - File Creation Mode indicates file overwriting if file exist.
-# + OVERWRITE, Overwrites if file(s) exist.
-# + APPEND, Continue logging after the old logging information if file(s) exist.
-#
-# - Will thread id include to the log filename.
-# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'.
-# + NO, No thread id to log file(s), Example filename 'Module.txt'.
-#
-# - Will time stamps include the to log file.
-# + YES, Time stamp added to each line in log file(s). Time stamp is
-# for example'12.Nov.2003 115958 LOGGING INFO'
-# + NO, No time stamp(s).
-#
-# - Will line breaks include to the log file.
-# + YES, Each logging event includes line break and next log event is in own line.
-# + NO, No line break(s).
-#
-# - Will event ranking include to the log file.
-# + YES, Event ranking number added to each line in log file(s). Ranking number
-# depends on environment's tics, for example(includes time stamp also)
-# '012 12.Nov.2003 115958 LOGGING INFO'
-# + NO, No event ranking.
-#
-# - Will write log file in unicode format.
-# + YES, Log file will be written in unicode format
-# + NO, Log will be written as normal, not unicode, file.
-#
-
-[Logger_Defaults]
-
-#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#'
-#NOTE: TestEngine and TestServer logging settings cannot change here
-
-#CreateLogDirectories= YES # Possible values: YES or NO
-
-#EmulatorBasePath= C:\LOGS\TestFramework\
-#EmulatorFormat= HTML # Possible values: TXT or HTML
-#EmulatorOutput= FILE # Possible values: FILE or RDEBUG
-
-#HardwareBasePath= D:\LOGS\TestFramework\
-#HardwareFormat= HTML # Possible values: TXT or HTML
-#HardwareOutput= FILE # Possible values: FILE or RDEBUG
-
-#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
-
-#ThreadIdToLogFile= YES # Possible values: YES or NO
-#WithTimeStamp= YES # Possible values: YES or NO
-#WithLineBreak= YES # Possible values: YES or NO
-#WithEventRanking= YES # Possible values: YES or NO
-
-#FileUnicode= YES # Possible values: YES or NO
-#AddTestCaseTitle= YES # Possible values: YES or NO
-[End_Logger_Defaults]
-# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-
-# End of file