diff -r b9b00b134b0d -r d316aecb87fd applicationmanagement/tsrc/tarmappmng/init/amtest.ini --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/applicationmanagement/tsrc/tarmappmng/init/amtest.ini Tue Jul 13 04:01:20 2010 +0530 @@ -0,0 +1,221 @@ +# +# This is STIF initialization file +# Comment lines start with '#'-character. +# See STIF TestFramework users guide.doc for instructions + +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +# Set following test engine settings: +# - Set Test Reporting mode. TestReportMode's possible values are: +# + 'Summary': Summary of the tested test cases. +# + 'Environment': Hardware and software info. +# + 'TestCases': Test case report. +# + 'FullReport': Set of all above ones. +# + Example 'TestReportMode= Summary TestCases' +# +# - CreateTestReport setting controls report creation mode +# + YES, Test report will created. +# + NO, No Test report. +# +# - File path indicates the base path of the test report. +# - File name indicates the name of the test report. +# +# - File format indicates the type of the test report. +# + TXT, Test report file will be txt type, for example 'TestReport.txt'. +# + HTML, Test report will be html type, for example 'TestReport.html'. +# + XML, Test report will be xml type, for example 'TestReport.xml'. +# Note, that xml format is available only when output is set to FILE. +# +# - File output indicates output source of the test report. +# + FILE, Test report logging to file. +# + RDEBUG, Test report logging to using rdebug. +# +# - File Creation Mode indicates test report overwriting if file exist. +# + OVERWRITE, Overwrites if the Test report file exist. +# + APPEND, Continue logging after the old Test report information if +# report exist. +# - Sets a device reset module's dll name(Reboot). +# + If Nokia specific reset module is not available or it is not correct one +# StifHWResetStub module may use as a template for user specific reset +# module. +# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation +# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02 +# + +[Engine_Defaults] + +TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment', + 'TestCases' or 'FullReport' + +CreateTestReport= YES # Possible values: YES or NO + +TestReportFilePath= C:\LOGS\TestFramework\ +TestReportFileName= TestReport + +TestReportFormat= TXT # Possible values: TXT, HTML or XML +TestReportOutput= FILE # Possible values: FILE or RDEBUG +TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND + +DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting + +DisableMeasurement= stifmeasurementdisablenone # Possible values are: + # 'stifmeasurementdisablenone', 'stifmeasurementdisableall' + # 'stifmeasurementplugin01', 'stifmeasurementplugin02', + # 'stifmeasurementplugin03', 'stifmeasurementplugin04', + # 'stifmeasurementplugin05' or 'stifbappeaprofiler' + +Timeout= 0 # Default timeout value for each test case. In milliseconds +#UITestingSupport= YES # Possible values: YES or NO +#SeparateProcesses= YES # Possible values: YES or NO (default: NO) +[End_Defaults] +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + + + +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +# Module configurations start +# Modules are added between module tags +# tags. Module name is specified after ModuleName= tag, like +# ModuleName= XXXXXXXXX +# Modules might have initialisation file, specified as +# IniFile= c:\testframework\YYYYYY +# Modules might have several configuration files, like +# TestCaseFile= c:\testframework\NormalCases.txt +# TestCaseFile= c:\testframework\SmokeCases.txt +# TestCaseFile= c:\testframework\ManualCases.txt + +# (TestCaseFile is synonym for old term ConfigFile) + +# Following case specifies demo module settings. Demo module +# does not read any settings from file, so tags +# IniFile and TestCaseFile are not used. +# In the simplest case it is enough to specify only the +# name of the test module when adding new test module + +[New_Module] +#ModuleName= demomodule + +ModuleName= testscripter +# ADM Test-Automation +ConfigFile= C:\TestFramework\amtest.cfg +[End_Module] + + +# Load testmoduleXXX, optionally with initialization file and/or test case files +#[New_Module] +#ModuleName= testmodulexxx + +#TestModuleXXX used initialization file +#IniFile= c:\testframework\init.txt + +#TestModuleXXX used configuration file(s) +#TestCaseFile= c:\testframework\testcases1.cfg +#TestCaseFile= c:\testframework\testcases2.cfg +#TestCaseFile= c:\testframework\manualtestcases.cfg + +#[End_Module] +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + + + +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +# Set STIF logging overwrite parameters for Logger. +# Hardware and emulator environment logging path and styles can +# be configured from here to overwrite the Logger's implemented values. +# +# Settings description: +# - Indicates option for creation log directory/directories. If log directory/directories +# is/are not created by user they will make by software. +# + YES, Create log directory/directories if not allready exist. +# + NO, Log directory/directories not created. Only created one is used. +# +# - Overwrite emulator path setting. +# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined +# Logger's path 'D:\\LOGS\\Module\\' with those definition the path +# will be 'C:\LOGS\TestFramework\LOGS\Module\' +# +# - Overwrite emulator's logging format. +# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'. +# + HTML, Log file(s) will be html type(s), for example 'Module.html'. +# +# - Overwrited emulator logging output source. +# + FILE, Logging to file(s). +# + RDEBUG, Logging to using rdebug(s). +# +# - Overwrite hardware path setting (Same description as above in emulator path). +# - Overwrite hardware's logging format(Same description as above in emulator format). +# - Overwrite hardware's logging output source(Same description as above in emulator output). +# +# - File Creation Mode indicates file overwriting if file exist. +# + OVERWRITE, Overwrites if file(s) exist. +# + APPEND, Continue logging after the old logging information if file(s) exist. +# +# - Will thread id include to the log filename. +# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'. +# + NO, No thread id to log file(s), Example filename 'Module.txt'. +# +# - Will time stamps include the to log file. +# + YES, Time stamp added to each line in log file(s). Time stamp is +# for example'12.Nov.2003 115958 LOGGING INFO' +# + NO, No time stamp(s). +# +# - Will line breaks include to the log file. +# + YES, Each logging event includes line break and next log event is in own line. +# + NO, No line break(s). +# +# - Will event ranking include to the log file. +# + YES, Event ranking number added to each line in log file(s). Ranking number +# depends on environment's tics, for example(includes time stamp also) +# '012 12.Nov.2003 115958 LOGGING INFO' +# + NO, No event ranking. +# +# - Will write log file in unicode format. +# + YES, Log file will be written in unicode format +# + NO, Log will be written as normal, not unicode, file. +# + +[Logger_Defaults] + +#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#' +#NOTE: TestEngine and TestServer logging settings cannot change here + +#CreateLogDirectories= YES # Possible values: YES or NO + +#EmulatorBasePath= C:\LOGS\TestFramework\ +#EmulatorFormat= HTML # Possible values: TXT or HTML +#EmulatorOutput= FILE # Possible values: FILE or RDEBUG + +#HardwareBasePath= D:\LOGS\TestFramework\ +#HardwareFormat= HTML # Possible values: TXT or HTML +#HardwareOutput= FILE # Possible values: FILE or RDEBUG + +#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND + +#ThreadIdToLogFile= YES # Possible values: YES or NO +#WithTimeStamp= YES # Possible values: YES or NO +#WithLineBreak= YES # Possible values: YES or NO +#WithEventRanking= YES # Possible values: YES or NO + +#FileUnicode= YES # Possible values: YES or NO +#AddTestCaseTitle= YES # Possible values: YES or NO +[End_Logger_Defaults] +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + + + +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +# Set filters to be used by ConsoleUI. +# If you want to use filter with ConsoleUI, simply remove comments +# from section below and provide valid filter entries. +# Each filter line has to start with "filter= " keyword. +# Filter can contain special wildcard characters: +# * which stands for none or any literal; +# ? which stands for single character. +# Filters are not case-sensitive. + +#[Filters] +#filter= *math* +#filter= *radio* +#[End_Filters] +# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + +# End of file