--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/homescreenapp/hsdomainmodel/src/hsbackuprestoreactivecallback.cpp Tue Aug 31 15:06:34 2010 +0300
@@ -0,0 +1,297 @@
+/*
+* Copyright (c) 2010 Nokia Corporation and/or its subsidiary(-ies).
+* All rights reserved.
+* This component and the accompanying materials are made available
+* under the terms of the License "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Nokia Corporation - initial contribution.
+*
+* Contributors:
+*
+* Description: Active callback for Backup/Restore observer.
+*
+*/
+
+
+#include <bautils.h>
+
+#include "hsbackuprestoreactivecallback.h"
+#include "hsbackuprestoreobserver.h"
+
+/*!
+ \class CHsBURActiveCallback
+ \ingroup group_hsdomainmodel
+ \brief B&R active callback.
+ Home screen active callback in backup/restore.
+*/
+
+/*!
+ Constructor.
+ \a observer Backup restore observer
+*/
+CHsBURActiveCallback* CHsBURActiveCallback::NewL(HsBackupRestoreObserver* observer)
+{
+ CHsBURActiveCallback* self =
+ new( ELeave ) CHsBURActiveCallback(observer);
+ CleanupStack::PushL( self );
+ self->ConstructL();
+ CleanupStack::Pop( self );
+
+ return self;
+}
+
+/*!
+ Destructor.
+*/
+CHsBURActiveCallback::~CHsBURActiveCallback()
+{
+}
+
+/*!
+ This method informs the active backup data client that all
+ snapshots have been supplied. If the client has not
+ received a snapshot then it should perform a base backup.
+ Inform that all data has been backed up or restored.
+*/
+void CHsBURActiveCallback::AllSnapshotsSuppliedL()
+{
+ // No implementation needed. Must not leave
+}
+
+/*!
+ This method receives all or part of a snapshot of data to allow
+ calculation of an incremental backup. The snapshot is one that
+ was previously supplied by the data owner. The snapshot data
+ should be read from the location supplied. The snapshot data may
+ be larger than the location supplied in which case the routine
+ will be called repeatedly until all data has been supplied.
+
+ Snapshot data will also be supplied as part of a restore operation
+
+ @param aDrive the drive being backed up
+ @param aBuffer a pointer to the base of the location from whence
+ data can be copied.
+ @param aLastSection ETrue if this is the last section of snapshot
+ data, else EFalse.
+
+ Not supported.
+*/
+void CHsBURActiveCallback::ReceiveSnapshotDataL(
+ TDriveNumber /*aDrive*/, TDesC8& /*aBuffer*/, TBool /*aLastSection*/)
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method returns the expected size of backup data that will be
+ supplied. If an incremental backup is underway then this method
+ then this method will not be called until after
+ ReceiveSnapshotDataL(). The size data will be used for the purpose
+ of tracking progess during a backup. If it is inaccurate then the
+ user may see irregular progress but the actual backup data will
+ not be affected so it is acceptable to return an estimated value.
+
+ @param aDrive the drive being backed up.
+ @return the size of the data that will be returned
+
+ Make a guess about data size.
+*/
+TUint CHsBURActiveCallback::GetExpectedDataSize(
+ TDriveNumber /*aDrive*/)
+{
+ // No implementation needed
+ return 0;
+}
+
+/*!
+ This method returns a snapshot of data to accompany a backup. The
+ snapshot is expected to contain details on files / data being
+ backed up. The format of the snapshot is only meaningful to the
+ data owner. The snapshot will be supplied if the data owner is
+ asked for an incremental backup and for a restore operation. The
+ snapshot data should be copied to the location supplied.
+
+ The snapshot data may be larger than the location supplied in
+ which case the routine will be called repeatedly until all data
+ has been retrieved.
+
+ @param aDrive the drive being backed up
+ @param aBuffer a pointer to the base of the location where data
+ can be copied.
+ @param aFinished on return ETrue if all data has been returned
+ for this drive, else EFalse.
+
+ Not supported.
+*/
+void CHsBURActiveCallback::GetSnapshotDataL(
+ TDriveNumber /*aDrive*/, TPtr8& /*aBuffer*/, TBool& /*aFinished*/)
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method prepares the implementor to return backup data. It
+ will be followed by a sequence of calls to request the actual
+ data.
+
+ @param aDrive the drive being backed up.
+
+ Initialize for backup.
+*/
+void CHsBURActiveCallback::InitialiseGetBackupDataL(
+ TDriveNumber /*aDrive*/)
+{
+ iObserver->backupRestoreStarted();
+}
+
+/*!
+ This method requests a section of backup data.
+ InitialiseGetBackupDataL() will have been called previously to
+ specify the drive concerned. The data returned may be base or
+ incremental depending on the type of backup and the capability of
+ the data owner.
+
+ @param aBuffer a pointer to the base of the location where data
+ can be copied.
+ @param aFinished on return ETrue if all data has been returned
+ for this drive, else EFalse.
+*/
+void CHsBURActiveCallback::GetBackupDataSectionL(
+ TPtr8& /*aBuffer*/, TBool& aFinished)
+{
+ // No data for active backup
+ aFinished = ETrue;
+}
+
+/*!
+ This method prepares the implementor to receive base restore data
+ for a drive. It will be followed by a sequence of calls to supply
+ the actual data.
+
+ @param aDrive the drive being restored.
+
+ Initialize restore.
+*/
+void CHsBURActiveCallback::InitialiseRestoreBaseDataL(
+ TDriveNumber /*aDrive*/ )
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method receives a section of base restore data.
+ InitialiseRestoreBaseDataL() will have been called previously to
+ specify the drive concerned.
+
+ @param aBuffer a pointer to the base of the location whence data
+ can be read.
+ @param aFinished ETrue if all data has been returned for this
+ drive, else EFalse.
+
+ Run state machine for restore. Receive stream from BUR engine and turn it
+ to file(s).
+*/
+void CHsBURActiveCallback::RestoreBaseDataSectionL(
+ TDesC8& /*aBuffer*/, TBool /*aFinished*/ )
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method prepares the implementor to receive incremental
+ restore data for a drive. It will be followed by a sequence
+ of calls to supply the actual data. If multiple increments
+ are supplied then this methid will be called before each increment
+
+ @param aDrive the drive being restored.
+
+ Not supported.
+*/
+void CHsBURActiveCallback::InitialiseRestoreIncrementDataL(
+ TDriveNumber /*aDrive*/)
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method receives a section of increment restore data.
+ InitialiseRestoreIncrementDataL() will have been called
+ previously to specify the drive concerned.
+
+ @param aBuffer a pointer to the base of the location whence data
+ can be read.
+ @param aFinished ETrue if all data has been returned for this
+ increment, else EFalse.
+
+ Not supported.
+*/
+void CHsBURActiveCallback::RestoreIncrementDataSectionL(
+ TDesC8& /*aBuffer*/, TBool /*aFinished*/)
+{
+ // No implementation needed
+ User::Leave( KErrNotSupported );
+}
+
+/*!
+ This method is called when all data to be restored has been
+ supplied.
+
+ @param aDrive the drive being restored.
+
+ Called when restore is complete - sets data back to initial state.
+*/
+void CHsBURActiveCallback::RestoreComplete(TDriveNumber /*aDrive*/)
+{
+ // No implementation needed
+}
+
+/*!
+ This method is called if copying of data is terminated prematurely
+ to allow the implementor to tidy up. The same method applies to
+ all types of data and to backup and restore.
+ Tidy up when operation is over.
+*/
+void CHsBURActiveCallback::TerminateMultiStageOperation()
+{
+ // No implementation needed
+}
+
+/*!
+ Gets a 32-bit checksum for its private data.
+ This routine is for test purposes. It must be implemented but an
+ invariant checksum value can be provided. Some tests may cause
+ checksum values to be compared.
+
+ @param aDrive the drive containing data being checksummed
+ @return the 32-bit checksum
+*/
+TUint CHsBURActiveCallback::GetDataChecksum(TDriveNumber /*aDrive*/)
+{
+ // No implementation needed
+ return 0;
+}
+
+/*!
+ C++ constructor.
+*/
+CHsBURActiveCallback::CHsBURActiveCallback(HsBackupRestoreObserver* observer)
+{
+ iObserver = observer;
+}
+
+/*!
+ 2nd phase constructor.
+*/
+void CHsBURActiveCallback::ConstructL()
+{
+}
+
+// End of file