widgetmanager/tsrc/wmunittest/conf/wmunittest.ini
changeset 0 f72a12da539e
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/widgetmanager/tsrc/wmunittest/conf/wmunittest.ini	Thu Dec 17 08:40:49 2009 +0200
@@ -0,0 +1,188 @@
+#
+# This is STIF initialization file
+# Comment lines start with '#'-character.
+# See STIF TestFramework users guide.doc for instructions
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Set following test engine settings:
+#	- Set Test Reporting mode. TestReportMode's possible values are:
+#		+ 'Summary': Summary of the tested test cases.
+#		+ 'Environment': Hardware and software info.
+#		+ 'TestCases': Test case report.
+#		+ 'FullReport': Set of all above ones.
+#		+ Example 'TestReportMode= Summary TestCases'
+#
+# 	- CreateTestReport setting controls report creation mode
+#		+ YES, Test report will created.
+#		+ NO, No Test report.
+#
+# 	- File path indicates the base path of the test report.
+# 	- File name indicates the name of the test report.
+#
+# 	- File format indicates the type of the test report.
+#		+ TXT, Test report file will be txt type, for example 'TestReport.txt'.
+#		+ HTML, Test report will be html type, for example 'TestReport.html'.
+#   + XML, Test report will be xml type, for example 'TestReport.xml'.
+#          Note, that xml format is available only when output is set to FILE.
+#
+# 	- File output indicates output source of the test report.
+#		+ FILE, Test report logging to file.
+#		+ RDEBUG, Test report logging to using rdebug.
+#
+# 	- File Creation Mode indicates test report overwriting if file exist.
+#		+ OVERWRITE, Overwrites if the Test report file exist.
+#		+ APPEND, Continue logging after the old Test report information if
+#                 report exist.
+# 	- Sets a device reset module's dll name(Reboot).
+#		+ If Nokia specific reset module is not available or it is not correct one
+#		  StifHWResetStub module may use as a template for user specific reset
+#		  module.
+# 	- Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation
+#		DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02
+#
+
+[Engine_Defaults]
+
+TestReportMode= FullReport    # Possible values are: 'Empty', 'Summary', 'Environment',
+                              #                      'TestCases' or 'FullReport'
+
+CreateTestReport= YES         # Possible values: YES or NO
+
+TestReportFilePath= C:\LOGS\TestFramework\
+TestReportFileName= WidgetManager
+
+TestReportFormat= TXT         # Possible values: TXT, HTML or XML
+TestReportOutput= FILE        # Possible values: FILE or RDEBUG
+TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
+
+DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting
+
+DisableMeasurement= stifmeasurementdisablenone  # Possible values are:
+              # 'stifmeasurementdisablenone', 'stifmeasurementdisableall'
+              # 'stifmeasurementplugin01', 'stifmeasurementplugin02',
+              # 'stifmeasurementplugin03', 'stifmeasurementplugin04',
+              # 'stifmeasurementplugin05' or 'stifbappeaprofiler'
+
+Timeout= 0                    # Default timeout value for each test case. In milliseconds
+UITestingSupport= YES        # Possible values: YES or NO
+#SeparateProcesses= YES       # Possible values: YES or NO (default: NO)
+[End_Defaults]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+# Widget manager unit tests
+[New_Module]
+ModuleName= testscripter
+TestCaseFile= c:\testframework\ui_wmunittest.cfg
+[End_Module]
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Set STIF logging overwrite parameters for Logger.
+# 	Hardware and emulator environment logging path and styles can
+# 	be configured from here to overwrite the Logger's implemented values.
+#	
+#	Settings description:
+#	- Indicates option for creation log directory/directories. If log directory/directories
+#         is/are not created by user they will make by software.
+#		+ YES, Create log directory/directories if not allready exist.
+#		+ NO, Log directory/directories not created. Only created one is used.
+#
+#	- Overwrite emulator path setting.
+#		+ Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined 
+#		           Logger's path 'D:\\LOGS\\Module\\' with those definition the path
+#		           will be 'C:\LOGS\TestFramework\LOGS\Module\'
+#
+#	- Overwrite emulator's logging format.
+#		+ TXT, Log file(s) will be txt type(s), for example 'Module.txt'.
+#		+ HTML, Log file(s) will be html type(s), for example 'Module.html'.
+#
+#	- Overwrited emulator logging output source.
+#		+ FILE, Logging to file(s).
+#		+ RDEBUG, Logging to using rdebug(s).
+#
+#	- Overwrite hardware path setting (Same description as above in emulator path).
+#	- Overwrite hardware's logging format(Same description as above in emulator format).
+#	- Overwrite hardware's logging output source(Same description as above in emulator output).
+#
+#	- File Creation Mode indicates file overwriting if file exist.
+#		+ OVERWRITE, Overwrites if file(s) exist.
+#		+ APPEND, Continue logging after the old logging information if file(s) exist.
+#
+#	- Will thread id include to the log filename.
+#		+ YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'.
+#		+ NO, No thread id to log file(s), Example filename 'Module.txt'.
+#
+#	- Will time stamps include the to log file.
+#		+ YES, Time stamp added to each line in log file(s). Time stamp is 
+#                 for example'12.Nov.2003 115958    LOGGING INFO'
+#		+ NO, No time stamp(s).
+#
+#	- Will line breaks include to the log file.
+#		+ YES, Each logging event includes line break and next log event is in own line.
+#		+ NO, No line break(s).
+#
+#	- Will event ranking include to the log file.
+#		+ YES, Event ranking number added to each line in log file(s). Ranking number
+#                 depends on environment's tics, for example(includes time stamp also)
+#                 '012   12.Nov.2003 115958    LOGGING INFO'
+#		+ NO, No event ranking.
+#
+#	- Will write log file in unicode format.
+#		+ YES, Log file will be written in unicode format
+#		+ NO, Log will be written as normal, not unicode, file.
+#
+
+[Logger_Defaults]
+
+#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#'
+#NOTE: TestEngine and TestServer logging settings cannot change here
+
+#CreateLogDirectories= YES    # Possible values: YES or NO
+
+#EmulatorBasePath= C:\LOGS\TestFramework\
+#EmulatorFormat= HTML         # Possible values: TXT or HTML
+#EmulatorOutput= FILE         # Possible values: FILE or RDEBUG
+
+#HardwareBasePath= D:\LOGS\TestFramework\
+#HardwareFormat= HTML         # Possible values: TXT or HTML
+#HardwareOutput= FILE         # Possible values: FILE or RDEBUG
+
+#FileCreationMode= OVERWRITE  # Possible values: OVERWRITE or APPEND
+
+#ThreadIdToLogFile= YES       # Possible values: YES or NO
+#WithTimeStamp= YES           # Possible values: YES or NO
+#WithLineBreak= YES           # Possible values: YES or NO
+#WithEventRanking= YES        # Possible values: YES or NO
+
+#FileUnicode= YES             # Possible values: YES or NO
+#AddTestCaseTitle= YES        # Possible values: YES or NO
+[End_Logger_Defaults]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+# Set filters to be used by ConsoleUI.
+# 	If you want to use filter with ConsoleUI, simply remove comments
+# 	from section below and provide valid filter entries.
+#   Each filter line has to start with "filter= " keyword.
+#   Filter can contain special wildcard characters:
+#     *  which stands for none or any literal;
+#     ?  which stands for single character.
+#   Filters are not case-sensitive.
+
+#[Filters]
+#filter= *math*
+#filter= *radio*
+#[End_Filters]
+# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+# End of file