phoneapp/phoneui/loc/phone.loc
branchRCL_3
changeset 62 5266b1f337bd
equal deleted inserted replaced
61:41a7f70b3818 62:5266b1f337bd
       
     1 /*
       
     2 * Copyright (c) 2002 Nokia Corporation and/or its subsidiary(-ies).
       
     3 * All rights reserved.
       
     4 * This component and the accompanying materials are made available
       
     5 * under the terms of "Eclipse Public License v1.0"
       
     6 * which accompanies this distribution, and is available
       
     7 * at the URL "http://www.eclipse.org/legal/epl-v10.html".
       
     8 *
       
     9 * Initial Contributors:
       
    10 * Nokia Corporation - initial contribution.
       
    11 *
       
    12 * Contributors:
       
    13 *
       
    14 * Description:
       
    15 *     This is a localisation file for Phone
       
    16 *     A .loc file is the one and only place where the logical strings
       
    17 *     to be localised are defined.
       
    18 *
       
    19 */
       
    20 
       
    21 
       
    22 // LOCALISATION STRINGS
       
    23 
       
    24 // d: It is text shown in a wait note when phone
       
    25 // d: tries to make an emergency call.
       
    26 // l: popup_note_window
       
    27 // w:
       
    28 //
       
    29 #define qtn_emerg_emergency_call_note "Attempting emergency call"
       
    30 
       
    31 // d: It is text shown in an error note when
       
    32 // d: emergency call creation fails.
       
    33 // l: popup_note_window
       
    34 // w:
       
    35 //
       
    36 #define qtn_emerg_call_error_note "Emergency call failed"
       
    37 
       
    38 // d: It is shown in a warning note when
       
    39 // d: user tries to make a normal call and
       
    40 // d: phone is requesting SIM card.
       
    41 // l: popup_note_window
       
    42 // w:
       
    43 //
       
    44 #define qtn_emerg_emergency_only "Emergency calls only"
       
    45 
       
    46 // d: It is text of phone application in application shell grid.
       
    47 // d: When user selects that item, then phone goes to idle state
       
    48 // d: or call related state.
       
    49 // l: cell_app_pane_t1
       
    50 // w:
       
    51 //
       
    52 #define qtn_apps_phone_grid "Tel"
       
    53 
       
    54 // d: It is text of phone application in application shell list.
       
    55 // d: When user selects that item, then phone goes to idle state
       
    56 // d: or call related state.
       
    57 // l: list_single_large_graphic_pane_t1
       
    58 // w:
       
    59 //
       
    60 #define qtn_apps_phone_list "Telephone"
       
    61 
       
    62 // d: It is the prompt text in one confirmation query dialog
       
    63 // d: It confirms the user to change the phone line(Toggle primary
       
    64 // d: and alternative phone line)
       
    65 // l: popup_note_window
       
    66 // w:
       
    67 //
       
    68 #define text_als_line_change_query "Change outgoing phone line?"
       
    69 
       
    70 // d: It is possible to change the line by long keypress on # -key
       
    71 // d: when the user has a possibility to use the number entry e.g.
       
    72 // d: in number entry (when there are no other digits included), when
       
    73 // d: the phone is in idle state and while in call. If the line
       
    74 // d: blocking setting is on, then the error note with this string
       
    75 // d: will be shown.
       
    76 // l: popup_note_window
       
    77 // w:
       
    78 //
       
    79 #define qtn_als_line_error_no_line_change "Line cannot be changed. The line blocking is on."
       
    80 
       
    81 // d: If the incoming call is diverted, this information note is shown
       
    82 // d: on the originally called party's phone.
       
    83 // l: popup_note_window
       
    84 // w:
       
    85 //
       
    86 #define qtn_mtcal_diverting_note "Diverting"
       
    87 
       
    88 // d: This message may be sent to the phone by the network at any time.
       
    89 // d: The message means that some supplementary service information has been lost
       
    90 // d:  in the network and the user will have to activate her services again.
       
    91 // d: The message is presented as a information Note with this text
       
    92 // l: popup_note_window
       
    93 // w:
       
    94 //
       
    95 #define text_net_info_lost "Check network services"
       
    96 
       
    97 // d: The unit format of the cug soft indicator
       
    98 // l: soft_indicator_pane_t1
       
    99 // w:
       
   100 //
       
   101 #define qtn_cug_indic_group "Group %N"
       
   102 
       
   103 // d: The confirmation query for the speed dial assignment. If the user tries
       
   104 // d: to create a call to speed dial number which is empty, this query dialog
       
   105 // d: is shown.
       
   106 // l: popup_note_window
       
   107 // w:
       
   108 //
       
   109 #define text_speed_dial_assign_new_qu "Speed dial not assigned. Assign it now?"
       
   110 
       
   111 // d: If user personalize the softkey on Idle state to "New message", when user
       
   112 // d: press softkey on idle state, the popup list dialog is shown on the screen.
       
   113 // d: The first line is this string, indicate user to write a new message.
       
   114 // d: same defination can be found in Message center
       
   115 // l: heading_pane_t1
       
   116 // w:
       
   117 //
       
   118 #define qtn_mce_pop_up_write "Write:"
       
   119 
       
   120 // d: The format string defines how date are shown on the navi pane of idle state.
       
   121 // d: %0U stands for the week day, and %1U stands for date.
       
   122 // l: navi_text_pane_t1
       
   123 // w:
       
   124 #define qtn_idle_time_format "%0U %1U"
       
   125 
       
   126 // d: It is template for information note text used to show
       
   127 // d: IMEI code.
       
   128 // d: %U is replaced with IMEI of the phone.
       
   129 // l: popup_note_window
       
   130 // w:
       
   131 //
       
   132 #define text_imei "Serial No.\n%U"
       
   133 
       
   134 // d: It is text shown in error note when empty sim location
       
   135 // d: is recalled in abbreviated dialling code.
       
   136 // l: popup_note_window
       
   137 // w:
       
   138 //
       
   139 #define qtn_simp_note_empty_location "No number stored in location %N"
       
   140 
       
   141 // d: suplement service notification. The network may send a notification
       
   142 // d: to the calling user which tells the CUG index used for the current
       
   143 // d: call. After the notification is received from the network, the phone
       
   144 // d: displays this confirmation note.
       
   145 // l: popup_note_window
       
   146 // w:
       
   147 //
       
   148 #define text_cug_in_use "Closed group %N in use"
       
   149 
       
   150 // d: If the network doesn’t support temporary CLIR suppression, this
       
   151 // d: Non-Phone Error Note is displayed and the call is made without
       
   152 // d: CLIR suppression.
       
   153 // l: popup_note_window
       
   154 // w:
       
   155 //
       
   156 #define text_clir_suppr_reject "Could not send own number"
       
   157 
       
   158 // d: If the call is diverted and the COLP has been activated there may be
       
   159 // d: a notification from the network. The information note with this
       
   160 // d: text is shown, where %U is the connected number.
       
   161 // l: popup_note_window
       
   162 // w:
       
   163 //
       
   164 #define text_colp_connected "Connected to %U"
       
   165 
       
   166 // d: If user tries to initiate a CS call during GPRS connection( attach or
       
   167 // d: context states ), an error note with this text is displayed.
       
   168 // l: popup_note_window
       
   169 // w:
       
   170 //
       
   171 #define qtn_gprs_err_conn_in_progress "End GPRS connection first"
       
   172 
       
   173 // d: When user enters *#2820# to the number entry a bluetooth address
       
   174 // d: is shown in a note. The note has this text before the address.
       
   175 // l: popup_note_window
       
   176 // w:
       
   177 //
       
   178 #define qtn_bt_dev_address "Bluetooth device address: %U"
       
   179 
       
   180 // d: When user enters *#9990# to the number entry and the bluetooth
       
   181 // d: loopback is enabled this text is shown in a note.
       
   182 // l: popup_note_window
       
   183 // w:
       
   184 //
       
   185 #define qtn_bt_loopback_enabled "Bluetooth RF loopback enabled."
       
   186 
       
   187 // d: When user enters *#9990# to the number entry and the bluetooth
       
   188 // d: loopback is disabled this text is shown in a note.
       
   189 // l: popup_note_window
       
   190 // w:
       
   191 //
       
   192 #define qtn_bt_loopback_disabled "Bluetooth RF loopback disabled."
       
   193 
       
   194 // d: If the network always presents calling party’s number to connected party and
       
   195 // d: user has temporarily tried to prevent this by invoking CLIR, the calling is prevented by
       
   196 // d: the operator. A global information note with following text is shown.
       
   197 // l: popup_note_window
       
   198 // w:
       
   199 #define text_clir_change "Activate own number sending"
       
   200 
       
   201 // d: If the user tries to press the volume key while in a TTY call, the following information
       
   202 // d: note is displayed and the volume is unchanged.
       
   203 // l: popup_note_window
       
   204 // w:
       
   205 //
       
   206 #define qtn_tty_info_no_audio_control "TTY call active. Volume control not available"
       
   207 
       
   208 // d: It is template for information note text used to show
       
   209 // d: Life timer code.
       
   210 // d: %U is replaced with Life timer value of the phone.
       
   211 // l: popup_note_window
       
   212 // w:
       
   213 //
       
   214 #define qtn_note_life_timer "Life timer\n%U"
       
   215 
       
   216 // d: Text in title pane in idle state
       
   217 // d: Remote SIM Access Profile is active. SIM or network  is not accessible
       
   218 // d: from the terminal. This doesn't relate to normal user profiles like General
       
   219 // d: or Meeting.
       
   220 // l: title_pane_t2/opt9
       
   221 // w:
       
   222 // r: 3.0
       
   223 //
       
   224 #define qtn_mode_sap "Remote SIM"
       
   225 
       
   226 // d: It's a menu item. When it's selected, the call isn't
       
   227 // d: rejected, but a unified message editor with soft reject default text is opened.
       
   228 // l: list_single_pane_t1_cp2
       
   229 // w:
       
   230 //
       
   231 #define qtn_call_soft_reject_option "Soft Reject"
       
   232 
       
   233 // d: It is template for information note text used to show WLAN MAC.
       
   234 // d: %U is replaced with MAC address.
       
   235 // l: popup_note_window
       
   236 // w:
       
   237 // r: 3.0
       
   238 //
       
   239 #define qtn_wlan_info_mac_address "WLAN MAC address: %U"
       
   240 
       
   241 // d: It is text shown in an error note when
       
   242 // d: fixed dialling active.
       
   243 // l: popup_note_window
       
   244 // w:
       
   245 // r: 3.2
       
   246 //
       
   247 #define qtn_fdn_call_not_allowed "Call not allowed, fixed dialling active"
       
   248 
       
   249 // d: This cause indicates that the called user cannot be reached because the network
       
   250 // d: through which the call has been routed does not serve the destination desired.
       
   251 // d: No route to destination
       
   252 // l: popup_note_window
       
   253 // w:
       
   254 // r: 5.0
       
   255 //
       
   256 #define qtn_call_info_cause_value3 "Unable to make video call. Not supported by other phone or network."
       
   257 
       
   258 // d: This cause indicates that the call is being cleared because one of the users
       
   259 // d: involved in the call has requested that the call be cleared.
       
   260 // d: Normal call clearing
       
   261 // l: popup_note_window
       
   262 // w:
       
   263 // r: 5.0
       
   264 //
       
   265 #define qtn_call_info_cause_value16 "Call ended"
       
   266 
       
   267 // d: This cause is used when a user does not respond to a call establishment
       
   268 // d: message with either an alerting or connect indication within the
       
   269 // d: prescribed period of time allocated.
       
   270 // d: No user responding
       
   271 // l: popup_note_window
       
   272 // w:
       
   273 // r: 5.0
       
   274 //
       
   275 #define qtn_call_info_cause_value18 "No answer"
       
   276 
       
   277 // d: This cause indicates that the equipment sending this cause does not wish
       
   278 // d: to accept this call, although it could have accepted the call because the
       
   279 // d: equipment sending this cause is neither busy nor incompatible.
       
   280 // d: Call rejected
       
   281 // l: popup_note_window
       
   282 // w:
       
   283 // r: 5.0
       
   284 //
       
   285 #define qtn_call_info_cause_value21 "Call rejected"
       
   286 
       
   287 // d: This cause is returned to a calling mobile station when the called party number
       
   288 // d: indicated by the calling mobile station is no longer assigned.
       
   289 // d: Number changed
       
   290 // l: popup_note_window
       
   291 // w:
       
   292 // r: 5.0
       
   293 //
       
   294 #define qtn_call_info_cause_value22 "Number not in use"
       
   295 
       
   296 // d: This cause is used to report a normal event only when no other cause in the
       
   297 // d: normal class applies.
       
   298 // d: Normal, unspecified
       
   299 // l: popup_note_window
       
   300 // w:
       
   301 // r: 5.0
       
   302 //
       
   303 #define qtn_call_info_cause_value31 "Call ended"
       
   304 
       
   305 // d: This cause indicates that there is no appropriate circuit/channel presently
       
   306 // d: available to handle the call.
       
   307 // d: No circuit/channel available
       
   308 // l: popup_note_window
       
   309 // w:
       
   310 // r: 5.0
       
   311 //
       
   312 #define qtn_call_info_cause_value34 "Network busy"
       
   313 
       
   314 // d: This cause indicates that the network is not functioning correctly and that the
       
   315 // d: condition is likely to last a relatively long period of time; e.g., immediately
       
   316 // d: re-attempting the call is not likely to be successful.
       
   317 // d: Network out of order
       
   318 // l: popup_note_window
       
   319 // w:
       
   320 // r: 5.0
       
   321 //
       
   322 #define qtn_call_info_cause_value38 "Unable to make video call. Not supported by other phone or network."
       
   323 
       
   324 // d: This cause indicates that the requested supplementary service could not be
       
   325 // d: provided by the network because the user has no completed the necessary
       
   326 // d: administrative arrangements with its supporting networks.
       
   327 // d: That cause may indicate also that the attempt fails due to the fact that receiving
       
   328 // d: end doesn’t support video call or is out of 3G coverage.
       
   329 // d: Requested facility not subscribed
       
   330 // l: popup_note_window
       
   331 // w:
       
   332 // r: 5.0
       
   333 //
       
   334 #define qtn_call_info_cause_value50 "Unable to make video call. Not supported by other phone or network."
       
   335 
       
   336 // d: This cause indicates that although the called party is a member of the CUG for
       
   337 // d: the incoming CUG call, incoming calls are not allowed within this CUG.
       
   338 // d: Incoming calls barred within the CUG
       
   339 // l: popup_note_window
       
   340 // w:
       
   341 // r: 5.0
       
   342 //
       
   343 #define qtn_call_info_cause_value55 "Number barred"
       
   344 
       
   345 // d: This cause indicates that the mobile station has requested a bearer capability
       
   346 // d: which is implemented by the equipment which generated this cause but the
       
   347 // d: mobile station is not authorized to use.
       
   348 // d: Bearer capability not authorized
       
   349 // l: popup_note_window
       
   350 // w:
       
   351 // r: 5.0
       
   352 //
       
   353 #define qtn_call_info_cause_value57 "Unable to make video call. Not supported by other phone or network."
       
   354 
       
   355 // d: This cause indicates that the mobile station has requested a bearer capability
       
   356 // d: which is implemented by the equipment which generated this cause but which is
       
   357 // d: not available at this time.
       
   358 // d: Bearer capability not presently available
       
   359 // l: popup_note_window
       
   360 // w:
       
   361 // r: 5.0
       
   362 //
       
   363 #define qtn_call_info_cause_value58 "Unable to make video call. Not supported by other phone or network."
       
   364 
       
   365 // d: This cause indicates that the equipment sending this cause has received a request
       
   366 // d: to establish a call which has low layer compatibility, high layer compatibility, or
       
   367 // d: other compatibility attributes (e.g., data rate) which cannot be accommodated.
       
   368 // d: Incompatible destination
       
   369 // l: popup_note_window
       
   370 // w:
       
   371 // r: 5.0
       
   372 //
       
   373 #define qtn_call_info_cause_value88 "Unable to make video call. Not supported by other phone or network."
       
   374 
       
   375 // d: This cause indicates that there has been interworking with a network which does
       
   376 // d: not provide causes for actions it takes; thus, the precise cause for a message
       
   377 // d: which is being sent cannot be ascertained.
       
   378 // d: Interworking, unspecified
       
   379 // l: popup_note_window
       
   380 // w:
       
   381 // r: 5.0
       
   382 //
       
   383 #define qtn_call_info_cause_value127 "Unable to make video call. Not supported by other phone or network."
       
   384 
       
   385 // d: Causes 25, 29, 30, 96, 97, 98, 99 and 102
       
   386 // l: popup_note_window
       
   387 // w:
       
   388 // r: 5.0
       
   389 //
       
   390 #define qtn_call_info_not_supported "Unable to make video call. Not supported by other phone or network."
       
   391 
       
   392 // d: Causes 63, 65, 70 and 79
       
   393 // l: popup_note_window
       
   394 // w:
       
   395 // r: 5.0
       
   396 //
       
   397 #define qtn_call_info_service_not_available "Unable to make video call. Not supported by other phone or network."
       
   398 
       
   399 // d: Defines wait note text when handover from WLAN->GSM is in progress.
       
   400 // l: popup_note_window
       
   401 // w:
       
   402 // r: 5.0
       
   403 #define qtn_vcc_wait_ho_from_wlan "Handover from WLAN to GSM"
       
   404 
       
   405 // d: Defines wait note text when handover from GSM->WLAN is in progress.
       
   406 // l: popup_note_window
       
   407 // w:
       
   408 // r: 5.0
       
   409 #define qtn_vcc_wait_ho_from_gsm "Handover from GSM to WLAN"
       
   410 
       
   411 // d: If handover fails, this note is displayed.
       
   412 // l: popup_note_window
       
   413 // w:
       
   414 // r: 5.0
       
   415 //
       
   416 #define qtn_vcc_info_ho_failed "Handover failed"
       
   417 
       
   418 // d: Displayed when manual handover item is visible, but handover is not possible.
       
   419 // l: popup_note_window
       
   420 // w:
       
   421 // r: 5.0
       
   422 //
       
   423 #define qtn_vcc_info_not_allowed "Handover not allowed"
       
   424 
       
   425 // d: Displayed when mobile originated video call gets out of UMTS coverage
       
   426 // l: popup_note_window
       
   427 // w:
       
   428 // r: 5.0
       
   429 //
       
   430 #define qtn_video_call_only_possible_under_3g_coverage "Videocall only possible under 3G coverage"
       
   431 
       
   432 // d: Displayed when user tries to make a video call to a terminal which does not have a
       
   433 // d: video telephony client
       
   434 // l: popup_note_window
       
   435 // w:
       
   436 // r: 5.0
       
   437 //
       
   438 #define qtn_unable_to_make_video_call_not_supported_by_other_phone "Unable to make video call. Not supported by other phone."
       
   439 
       
   440 // d: Displayed when user tries to make a video call to a terminal which is out of UMTS coverage
       
   441 // l: popup_note_window
       
   442 // w:
       
   443 // r: 5.0
       
   444 //
       
   445 #define qtn_phone_out_of_3g_coverage "Phone switched off or out of 3G coverage"
       
   446 
       
   447 // d: Displayed when user tries to make a video call to a terminal which have barred incomin calls
       
   448 // l: popup_note_window
       
   449 // w:
       
   450 // r: 5.0
       
   451 //
       
   452 #define qtn_called_number_has_barred_incoming_calls "Called number has barred incoming calls"
       
   453 
       
   454 //d: Permanent note Invalid Card. Shown when the Sim inserted is not same as 
       
   455 //d: the one provided by the operator.
       
   456 //l: popup_note_window
       
   457 //w:
       
   458 //r: 5.0
       
   459 #define text_invalid_card "Invalid card"
       
   460 // End of File