--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/phoneapp/phoneui/loc/phone.loc	Mon Jan 18 20:18:27 2010 +0200
@@ -0,0 +1,454 @@
+/*
+* Copyright (c) 2002 Nokia Corporation and/or its subsidiary(-ies).
+* All rights reserved.
+* This component and the accompanying materials are made available
+* under the terms of "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Nokia Corporation - initial contribution.
+*
+* Contributors:
+*
+* Description:
+*     This is a localisation file for Phone
+*     A .loc file is the one and only place where the logical strings
+*     to be localised are defined.
+*
+*/
+
+
+// LOCALISATION STRINGS
+
+// d: It is text shown in a wait note when phone
+// d: tries to make an emergency call.
+// l: popup_note_window
+// w:
+//
+#define qtn_emerg_emergency_call_note "Attempting emergency call"
+
+// d: It is text shown in an error note when
+// d: emergency call creation fails.
+// l: popup_note_window
+// w:
+//
+#define qtn_emerg_call_error_note "Emergency call failed"
+
+// d: It is shown in a warning note when
+// d: user tries to make a normal call and
+// d: phone is requesting SIM card.
+// l: popup_note_window
+// w:
+//
+#define qtn_emerg_emergency_only "Emergency calls only"
+
+// d: It is text of phone application in application shell grid.
+// d: When user selects that item, then phone goes to idle state
+// d: or call related state.
+// l: cell_app_pane_t1
+// w:
+//
+#define qtn_apps_phone_grid "Tel"
+
+// d: It is text of phone application in application shell list.
+// d: When user selects that item, then phone goes to idle state
+// d: or call related state.
+// l: list_single_large_graphic_pane_t1
+// w:
+//
+#define qtn_apps_phone_list "Telephone"
+
+// d: It is the prompt text in one confirmation query dialog
+// d: It confirms the user to change the phone line(Toggle primary
+// d: and alternative phone line)
+// l: popup_note_window
+// w:
+//
+#define text_als_line_change_query "Change outgoing phone line?"
+
+// d: It is possible to change the line by long keypress on # -key
+// d: when the user has a possibility to use the number entry e.g.
+// d: in number entry (when there are no other digits included), when
+// d: the phone is in idle state and while in call. If the line
+// d: blocking setting is on, then the error note with this string
+// d: will be shown.
+// l: popup_note_window
+// w:
+//
+#define qtn_als_line_error_no_line_change "Line cannot be changed. The line blocking is on."
+
+// d: If the incoming call is diverted, this information note is shown
+// d: on the originally called party's phone.
+// l: popup_note_window
+// w:
+//
+#define qtn_mtcal_diverting_note "Diverting"
+
+// d: This message may be sent to the phone by the network at any time.
+// d: The message means that some supplementary service information has been lost
+// d:  in the network and the user will have to activate her services again.
+// d: The message is presented as a information Note with this text
+// l: popup_note_window
+// w:
+//
+#define text_net_info_lost "Check network services"
+
+// d: The unit format of the cug soft indicator
+// l: soft_indicator_pane_t1
+// w:
+//
+#define qtn_cug_indic_group "Group %N"
+
+// d: The confirmation query for the speed dial assignment. If the user tries
+// d: to create a call to speed dial number which is empty, this query dialog
+// d: is shown.
+// l: popup_note_window
+// w:
+//
+#define text_speed_dial_assign_new_qu "Speed dial not assigned. Assign it now?"
+
+// d: If user personalize the softkey on Idle state to "New message", when user
+// d: press softkey on idle state, the popup list dialog is shown on the screen.
+// d: The first line is this string, indicate user to write a new message.
+// d: same defination can be found in Message center
+// l: heading_pane_t1
+// w:
+//
+#define qtn_mce_pop_up_write "Write:"
+
+// d: The format string defines how date are shown on the navi pane of idle state.
+// d: %0U stands for the week day, and %1U stands for date.
+// l: navi_text_pane_t1
+// w:
+#define qtn_idle_time_format "%0U %1U"
+
+// d: It is template for information note text used to show
+// d: IMEI code.
+// d: %U is replaced with IMEI of the phone.
+// l: popup_note_window
+// w:
+//
+#define text_imei "Serial No.\n%U"
+
+// d: It is text shown in error note when empty sim location
+// d: is recalled in abbreviated dialling code.
+// l: popup_note_window
+// w:
+//
+#define qtn_simp_note_empty_location "No number stored in location %N"
+
+// d: suplement service notification. The network may send a notification
+// d: to the calling user which tells the CUG index used for the current
+// d: call. After the notification is received from the network, the phone
+// d: displays this confirmation note.
+// l: popup_note_window
+// w:
+//
+#define text_cug_in_use "Closed group %N in use"
+
+// d: If the network doesn’t support temporary CLIR suppression, this
+// d: Non-Phone Error Note is displayed and the call is made without
+// d: CLIR suppression.
+// l: popup_note_window
+// w:
+//
+#define text_clir_suppr_reject "Could not send own number"
+
+// d: If the call is diverted and the COLP has been activated there may be
+// d: a notification from the network. The information note with this
+// d: text is shown, where %U is the connected number.
+// l: popup_note_window
+// w:
+//
+#define text_colp_connected "Connected to %U"
+
+// d: If user tries to initiate a CS call during GPRS connection( attach or
+// d: context states ), an error note with this text is displayed.
+// l: popup_note_window
+// w:
+//
+#define qtn_gprs_err_conn_in_progress "End GPRS connection first"
+
+// d: When user enters *#2820# to the number entry a bluetooth address
+// d: is shown in a note. The note has this text before the address.
+// l: popup_note_window
+// w:
+//
+#define qtn_bt_dev_address "Bluetooth device address: %U"
+
+// d: When user enters *#9990# to the number entry and the bluetooth
+// d: loopback is enabled this text is shown in a note.
+// l: popup_note_window
+// w:
+//
+#define qtn_bt_loopback_enabled "Bluetooth RF loopback enabled."
+
+// d: When user enters *#9990# to the number entry and the bluetooth
+// d: loopback is disabled this text is shown in a note.
+// l: popup_note_window
+// w:
+//
+#define qtn_bt_loopback_disabled "Bluetooth RF loopback disabled."
+
+// d: If the network always presents calling party’s number to connected party and
+// d: user has temporarily tried to prevent this by invoking CLIR, the calling is prevented by
+// d: the operator. A global information note with following text is shown.
+// l: popup_note_window
+// w:
+#define text_clir_change "Activate own number sending"
+
+// d: If the user tries to press the volume key while in a TTY call, the following information
+// d: note is displayed and the volume is unchanged.
+// l: popup_note_window
+// w:
+//
+#define qtn_tty_info_no_audio_control "TTY call active. Volume control not available"
+
+// d: It is template for information note text used to show
+// d: Life timer code.
+// d: %U is replaced with Life timer value of the phone.
+// l: popup_note_window
+// w:
+//
+#define qtn_note_life_timer "Life timer\n%U"
+
+// d: Text in title pane in idle state
+// d: Remote SIM Access Profile is active. SIM or network  is not accessible
+// d: from the terminal. This doesn't relate to normal user profiles like General
+// d: or Meeting.
+// l: title_pane_t2/opt9
+// w:
+// r: 3.0
+//
+#define qtn_mode_sap "Remote SIM"
+
+// d: It's a menu item. When it's selected, the call isn't
+// d: rejected, but a unified message editor with soft reject default text is opened.
+// l: list_single_pane_t1_cp2
+// w:
+//
+#define qtn_call_soft_reject_option "Soft Reject"
+
+// d: It is template for information note text used to show WLAN MAC.
+// d: %U is replaced with MAC address.
+// l: popup_note_window
+// w:
+// r: 3.0
+//
+#define qtn_wlan_info_mac_address "WLAN MAC address: %U"
+
+// d: It is text shown in an error note when
+// d: fixed dialling active.
+// l: popup_note_window
+// w:
+// r: 3.2
+//
+#define qtn_fdn_call_not_allowed "Call not allowed, fixed dialling active"
+
+// d: This cause indicates that the called user cannot be reached because the network
+// d: through which the call has been routed does not serve the destination desired.
+// d: No route to destination
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value3 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that the call is being cleared because one of the users
+// d: involved in the call has requested that the call be cleared.
+// d: Normal call clearing
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value16 "Call ended"
+
+// d: This cause is used when a user does not respond to a call establishment
+// d: message with either an alerting or connect indication within the
+// d: prescribed period of time allocated.
+// d: No user responding
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value18 "No answer"
+
+// d: This cause indicates that the equipment sending this cause does not wish
+// d: to accept this call, although it could have accepted the call because the
+// d: equipment sending this cause is neither busy nor incompatible.
+// d: Call rejected
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value21 "Call rejected"
+
+// d: This cause is returned to a calling mobile station when the called party number
+// d: indicated by the calling mobile station is no longer assigned.
+// d: Number changed
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value22 "Number not in use"
+
+// d: This cause is used to report a normal event only when no other cause in the
+// d: normal class applies.
+// d: Normal, unspecified
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value31 "Call ended"
+
+// d: This cause indicates that there is no appropriate circuit/channel presently
+// d: available to handle the call.
+// d: No circuit/channel available
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value34 "Network busy"
+
+// d: This cause indicates that the network is not functioning correctly and that the
+// d: condition is likely to last a relatively long period of time; e.g., immediately
+// d: re-attempting the call is not likely to be successful.
+// d: Network out of order
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value38 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that the requested supplementary service could not be
+// d: provided by the network because the user has no completed the necessary
+// d: administrative arrangements with its supporting networks.
+// d: That cause may indicate also that the attempt fails due to the fact that receiving
+// d: end doesn’t support video call or is out of 3G coverage.
+// d: Requested facility not subscribed
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value50 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that although the called party is a member of the CUG for
+// d: the incoming CUG call, incoming calls are not allowed within this CUG.
+// d: Incoming calls barred within the CUG
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value55 "Number barred"
+
+// d: This cause indicates that the mobile station has requested a bearer capability
+// d: which is implemented by the equipment which generated this cause but the
+// d: mobile station is not authorized to use.
+// d: Bearer capability not authorized
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value57 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that the mobile station has requested a bearer capability
+// d: which is implemented by the equipment which generated this cause but which is
+// d: not available at this time.
+// d: Bearer capability not presently available
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value58 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that the equipment sending this cause has received a request
+// d: to establish a call which has low layer compatibility, high layer compatibility, or
+// d: other compatibility attributes (e.g., data rate) which cannot be accommodated.
+// d: Incompatible destination
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value88 "Unable to make video call. Not supported by other phone or network."
+
+// d: This cause indicates that there has been interworking with a network which does
+// d: not provide causes for actions it takes; thus, the precise cause for a message
+// d: which is being sent cannot be ascertained.
+// d: Interworking, unspecified
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_cause_value127 "Unable to make video call. Not supported by other phone or network."
+
+// d: Causes 25, 29, 30, 96, 97, 98, 99 and 102
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_not_supported "Unable to make video call. Not supported by other phone or network."
+
+// d: Causes 63, 65, 70 and 79
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_call_info_service_not_available "Unable to make video call. Not supported by other phone or network."
+
+// d: Defines wait note text when handover from WLAN->GSM is in progress.
+// l: popup_note_window
+// w:
+// r: 5.0
+#define qtn_vcc_wait_ho_from_wlan "Handover from WLAN to GSM"
+
+// d: Defines wait note text when handover from GSM->WLAN is in progress.
+// l: popup_note_window
+// w:
+// r: 5.0
+#define qtn_vcc_wait_ho_from_gsm "Handover from GSM to WLAN"
+
+// d: If handover fails, this note is displayed.
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_vcc_info_ho_failed "Handover failed"
+
+// d: Displayed when manual handover item is visible, but handover is not possible.
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_vcc_info_not_allowed "Handover not allowed"
+
+// d: Displayed when mobile originated video call gets out of UMTS coverage
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_video_call_only_possible_under_3g_coverage "Videocall only possible under 3G coverage"
+
+// d: Displayed when user tries to make a video call to a terminal which does not have a
+// d: video telephony client
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_unable_to_make_video_call_not_supported_by_other_phone "Unable to make video call. Not supported by other phone."
+
+// d: Displayed when user tries to make a video call to a terminal which is out of UMTS coverage
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_phone_out_of_3g_coverage "Phone switched off or out of 3G coverage"
+
+// d: Displayed when user tries to make a video call to a terminal which have barred incomin calls
+// l: popup_note_window
+// w:
+// r: 5.0
+//
+#define qtn_called_number_has_barred_incoming_calls "Called number has barred incoming calls"
+
+// End of File