/*
** 2001 September 15
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
** May you do good and not evil.
** May you find forgiveness for yourself and forgive others.
** May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the SQLite library
** presents to client programs. If a C-function, structure, datatype,
** or constant definition does not appear in this file, then it is
** not a published API of SQLite, is subject to change without
** notice, and should not be referenced by programs that use SQLite.
**
** Some of the definitions that are in this file are marked as
** "experimental". Experimental interfaces are normally new
** features recently added to SQLite. We do not anticipate changes
** to experimental interfaces but reserve to make minor changes if
** experience from use "in the wild" suggest such changes are prudent.
**
** The official C-language API documentation for SQLite is derived
** from comments in this file. This file is the authoritative source
** on how SQLite interfaces are suppose to operate.
**
** The name of this file under configuration management is "sqlite.h.in".
** The makefile makes some minor changes to this file (such as inserting
** the version number) and changes its name to "sqlite3.h" as
** part of the build process.
**
** @(#) $Id: sqlite3.h 1420 2009-01-13 15:06:30Z teknolog $
*/
#ifndef _SQLITE3_H_
#define _SQLITE3_H_
#include <stdarg.h> /* Needed for the definition of va_list */
/*
** Make sure we can call this stuff from C++.
*/
#ifdef __cplusplus
extern "C" {
#endif
//#define EXPORT_C
//#define /*IMPORT_C*/
/*
** Add the ability to override 'extern'
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif
/*
** Make sure these symbols where not defined by some previous header
** file.
*/
#ifdef SQLITE_VERSION
# undef SQLITE_VERSION
#endif
#ifdef SQLITE_VERSION_NUMBER
# undef SQLITE_VERSION_NUMBER
#endif
/*
** CAPI3REF: Compile-Time Library Version Numbers {F10010}
**
** {F10011} The #define in the sqlite3.h header file named
** SQLITE_VERSION resolves to a string literal that identifies
** the version of the SQLite library in the format "X.Y.Z", where
** X is the major version number, Y is the minor version number and Z
** is the release number. The X.Y.Z might be followed by "alpha" or "beta".
** {END} For example "3.1.1beta".
**
** The X value is always 3 in SQLite. The X value only changes when
** backwards compatibility is broken and we intend to never break
** backwards compatibility. The Y value only changes when
** there are major feature enhancements that are forwards compatible
** but not backwards compatible. The Z value is incremented with
** each release but resets back to 0 when Y is incremented.
**
** {F10014} The SQLITE_VERSION_NUMBER #define resolves to an integer
** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are as
** with SQLITE_VERSION. {END} For example, for version "3.1.1beta",
** SQLITE_VERSION_NUMBER is set to 3001001. To detect if they are using
** version 3.1.1 or greater at compile time, programs may use the test
** (SQLITE_VERSION_NUMBER>=3001001).
**
** See also: [sqlite3_libversion()] and [sqlite3_libversion_number()].
*/
#define SQLITE_VERSION "3.5.4"
#define SQLITE_VERSION_NUMBER 3005004
/*
** CAPI3REF: Run-Time Library Version Numbers {F10020}
**
** {F10021} The sqlite3_libversion_number() interface returns an integer
** equal to [SQLITE_VERSION_NUMBER]. {END} The value returned
** by this routine should only be different from the header values
** if the application is compiled using an sqlite3.h header from a
** different version of SQLite than library. Cautious programmers might
** include a check in their application to verify that
** sqlite3_libversion_number() always returns the value
** [SQLITE_VERSION_NUMBER].
**
** {F10022} The sqlite3_version[] string constant contains the text of the
** [SQLITE_VERSION] string. {F10023} The sqlite3_libversion() function returns
** a pointer to the sqlite3_version[] string constant. {END} The
** sqlite3_libversion() function
** is provided for DLL users who can only access functions and not
** constants within the DLL.
*/
const char sqlite3_version[] = SQLITE_VERSION;
/*IMPORT_C*/ const char *sqlite3_libversion(void);
/*IMPORT_C*/ int sqlite3_libversion_number(void);
void LogMessage(char *message);
/*
** CAPI3REF: Test To See If The Library Is Threadsafe {F10100}
**
** {F10101} The sqlite3_threadsafe() routine returns nonzero
** if SQLite was compiled with its mutexes enabled or zero if
** SQLite was compiled with mutexes disabled. {END} If this
** routine returns false, then it is not safe for simultaneously
** running threads to both invoke SQLite interfaces.
**
** Really all this routine does is return true if SQLite was
** compiled with the -DSQLITE_THREADSAFE=1 option and false if
** compiled with -DSQLITE_THREADSAFE=0. If SQLite uses an
** application-defined mutex subsystem, malloc subsystem, collating
** sequence, VFS, SQL function, progress callback, commit hook,
** extension, or other accessories and these add-ons are not
** threadsafe, then clearly the combination will not be threadsafe
** either. Hence, this routine never reports that the library
** is guaranteed to be threadsafe, only when it is guaranteed not
** to be.
*/
/*IMPORT_C*/ int sqlite3_threadsafe(void);
/*
** CAPI3REF: Database Connection Handle {F12000}
**
** Each open SQLite database is represented by pointer to an instance of the
** opaque structure named "sqlite3". It is useful to think of an sqlite3
** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and
** [sqlite3_open_v2()] interfaces are its constructors
** and [sqlite3_close()] is its destructor. There are many other interfaces
** (such as [sqlite3_prepare_v2()], [sqlite3_create_function()], and
** [sqlite3_busy_timeout()] to name but three) that are methods on this
** object.
*/
typedef struct sqlite3 sqlite3;
/*
** CAPI3REF: 64-Bit Integer Types {F10200}
**
** Because there is no cross-platform way to specify such types
** SQLite includes typedefs for 64-bit signed and unsigned integers.
** {F10201} The sqlite_int64 and sqlite3_int64 types specify a
** 64-bit signed integer. {F10202} The sqlite_uint64 and
** sqlite3_uint64 types specify a 64-bit unsigned integer. {END}
**
** The sqlite3_int64 and sqlite3_uint64 are the preferred type
** definitions. The sqlite_int64 and sqlite_uint64 types are
** supported for backwards compatibility only.
*/
#ifdef SQLITE_INT64_TYPE
typedef SQLITE_INT64_TYPE sqlite_int64;
typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
#elif defined(_MSC_VER) || defined(__BORLANDC__)
typedef __int64 sqlite_int64;
typedef unsigned __int64 sqlite_uint64;
#else
typedef long long int sqlite_int64;
typedef unsigned long long int sqlite_uint64;
#endif
typedef sqlite_int64 sqlite3_int64;
typedef sqlite_uint64 sqlite3_uint64;
/*
** If compiling for a processor that lacks floating point support,
** substitute integer for floating-point
*/
#ifdef SQLITE_OMIT_FLOATING_POINT
# define double sqlite3_int64
#endif
/*
** CAPI3REF: Closing A Database Connection {F12010}
**
** {F12011} The sqlite3_close() interfaces destroys an [sqlite3] object
** allocated by a prior call to [sqlite3_open()], [sqlite3_open16()], or
** [sqlite3_open_v2()]. {F12012} Sqlite3_close() releases all
** memory used by the connection and closes all open files. {END}.
**
** {F12013} If the database connection contains
** [sqlite3_stmt | prepared statements] that have not been finalized
** by [sqlite3_finalize()], then sqlite3_close() returns SQLITE_BUSY
** and leaves the connection open. {F12014} Giving sqlite3_close()
** a NULL pointer is a harmless no-op. {END}
**
** {U12015} Passing this routine a database connection that has already been
** closed results in undefined behavior. {U12016} If other interfaces that
** reference the same database connection are pending (either in the
** same thread or in different threads) when this routine is called,
** then the behavior is undefined and is almost certainly undesirable.
*/
/*IMPORT_C*/ int sqlite3_close(sqlite3 *);
/*
** The type for a callback function.
** This is legacy and deprecated. It is included for historical
** compatibility and is not documented.
*/
typedef int (*sqlite3_callback)(void*,int,char**, char**);
/*
** CAPI3REF: One-Step Query Execution Interface {F12100}
**
** {F12101} The sqlite3_exec() interface evaluates zero or more
** UTF-8 encoded, semicolon-separated SQL statements in the zero-terminated
** string of its second argument. {F12102} The SQL
** statements are evaluated in the context of the database connection
** specified by in the first argument.
** {F12103} SQL statements are prepared one by one using
** [sqlite3_prepare()] or the equivalent, evaluated
** using one or more calls to [sqlite3_step()], then destroyed
** using [sqlite3_finalize()]. {F12104} The return value of
** sqlite3_exec() is SQLITE_OK if all SQL statement run
** successfully.
**
** {F12105} If one or more of the SQL statements handed to
** sqlite3_exec() are queries, then
** the callback function specified by the 3rd parameter is
** invoked once for each row of the query result. {F12106}
** If the callback returns a non-zero value then the query
** is aborted, all subsequent SQL statements
** are skipped and the sqlite3_exec() function returns the [SQLITE_ABORT].
**
** {F12107} The 4th parameter to sqlite3_exec() is an arbitrary pointer
** that is passed through to the callback function as its first parameter.
**
** {F12108} The 2nd parameter to the callback function is the number of
** columns in the query result. {F12109} The 3rd parameter to the callback
** is an array of pointers to strings holding the values for each column
** as extracted using [sqlite3_column_text()]. NULL values in the result
** set result in a NULL pointer. All other value are in their UTF-8
** string representation. {F12117}
** The 4th parameter to the callback is an array of strings
** obtained using [sqlite3_column_name()] and holding
** the names of each column, also in UTF-8.
**
** {F12110} The callback function may be NULL, even for queries. A NULL
** callback is not an error. It just means that no callback
** will be invoked.
**
** {F12112} If an error occurs while parsing or evaluating the SQL
** then an appropriate error message is written into memory obtained
** from [sqlite3_malloc()] and *errmsg is made to point to that message
** assuming errmsg is not NULL.
** {U12113} The calling function is responsible for freeing the memory
** using [sqlite3_free()].
** {F12116} If [sqlite3_malloc()] fails while attempting to generate
** the error message, *errmsg is set to NULL.
** {F12114} If errmsg is NULL then no attempt is made to generate an
** error message. <todo>Is the return code SQLITE_NOMEM or the original
** error code?</todo> <todo>What happens if there are multiple errors?
** Do we get code for the first error, or is the choice of reported
** error arbitrary?</todo>
**
** {F12115} The return value is is SQLITE_OK if there are no errors and
** some other [SQLITE_OK | return code] if there is an error.
** The particular return value depends on the type of error. {END}
*/
/*IMPORT_C*/ int sqlite3_exec(
sqlite3*, /* An open database */
const char *sql, /* SQL to be evaluted */
int (*callback)(void*,int,char**,char**), /* Callback function */
void *, /* 1st argument to callback */
char **errmsg /* Error msg written here */
);
/*
** CAPI3REF: Result Codes {F10210}
** KEYWORDS: SQLITE_OK
**
** Many SQLite functions return an integer result code from the set shown
** above in order to indicates success or failure.
**
** {F10211} The result codes shown here are the only ones returned
** by SQLite in its default configuration. {F10212} However, the
** [sqlite3_extended_result_codes()] API can be used to set a database
** connectoin to return more detailed result codes. {END}
**
** See also: [SQLITE_IOERR_READ | extended result codes]
**
*/
#define SQLITE_OK 0 /* Successful result */
/* beginning-of-error-codes */
#define SQLITE_ERROR 1 /* SQL error or missing database */
#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
#define SQLITE_PERM 3 /* Access permission denied */
#define SQLITE_ABORT 4 /* Callback routine requested an abort */
#define SQLITE_BUSY 5 /* The database file is locked */
#define SQLITE_LOCKED 6 /* A table in the database is locked */
#define SQLITE_NOMEM 7 /* A malloc() failed */
#define SQLITE_READONLY 8 /* Attempt to write a readonly database */
#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/
#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */
#define SQLITE_FULL 13 /* Insertion failed because database is full */
#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */
#define SQLITE_EMPTY 16 /* Database is empty */
#define SQLITE_SCHEMA 17 /* The database schema changed */
#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
#define SQLITE_MISMATCH 20 /* Data type mismatch */
#define SQLITE_MISUSE 21 /* Library used incorrectly */
#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
#define SQLITE_AUTH 23 /* Authorization denied */
#define SQLITE_FORMAT 24 /* Auxiliary database format error */
#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
#define SQLITE_NOTADB 26 /* File opened that is not a database file */
#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
/* end-of-error-codes */
/*
** CAPI3REF: Extended Result Codes {F10220}
**
** In its default configuration, SQLite API routines return one of 26 integer
** [SQLITE_OK | result codes]. However, experience has shown that
** many of these result codes are too course-grained. They do not provide as
** much information about problems as programmers might like. In an effort to
** address this, newer versions of SQLite (version 3.3.8 and later) include
** support for additional result codes that provide more detailed information
** about errors. {F10221} The extended result codes are enabled or disabled
** for each database connection using the [sqlite3_extended_result_codes()]
** API. {END}
**
** Some of the available extended result codes are listed above.
** We expect the number of extended result codes will be expand
** over time. {U10422} Software that uses extended result codes should expect
** to see new result codes in future releases of SQLite. {END}
**
** {F10223} The symbolic name for an extended result code always contains
** a related primary result code as a prefix. {F10224} Primary result
** codes contain a single "_" character. {F10225} Extended result codes
** contain two or more "_" characters. {F10226} The numeric value of an
** extended result code can be converted to its
** corresponding primary result code by masking off the lower 8 bytes. {END}
**
** The SQLITE_OK result code will never be extended. It will always
** be exactly zero.
*/
#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8))
#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8))
#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8))
#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8))
#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8))
#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8))
#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8))
#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8))
#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8))
/*
** CAPI3REF: Flags For File Open Operations {F10230}
**
** {F10231} Some combination of the these bit values are used as the
** third argument to the [sqlite3_open_v2()] interface and
** as fourth argument to the xOpen method of the
** [sqlite3_vfs] object.
*/
#define SQLITE_OPEN_READONLY 0x00000001
#define SQLITE_OPEN_READWRITE 0x00000002
#define SQLITE_OPEN_CREATE 0x00000004
#define SQLITE_OPEN_DELETEONCLOSE 0x00000008
#define SQLITE_OPEN_EXCLUSIVE 0x00000010
#define SQLITE_OPEN_MAIN_DB 0x00000100
#define SQLITE_OPEN_TEMP_DB 0x00000200
#define SQLITE_OPEN_TRANSIENT_DB 0x00000400
#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800
#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000
#define SQLITE_OPEN_SUBJOURNAL 0x00002000
#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000
/*
** CAPI3REF: Device Characteristics {F10240}
**
** {F10241} The xDeviceCapabilities method of the [sqlite3_io_methods]
** object returns an integer which is a vector of the these
** bit values expressing I/O characteristics of the mass storage
** device that holds the file that the [sqlite3_io_methods]
** refers to. {END}
**
** {F10242} The SQLITE_IOCAP_ATOMIC property means that all writes of
** any size are atomic. {F10243} The SQLITE_IOCAP_ATOMICnnn values
** mean that writes of blocks that are nnn bytes in size and
** are aligned to an address which is an integer multiple of
** nnn are atomic. {F10244} The SQLITE_IOCAP_SAFE_APPEND value means
** that when data is appended to a file, the data is appended
** first then the size of the file is extended, never the other
** way around. {F10245} The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
** to xWrite().
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
#define SQLITE_IOCAP_ATOMIC1K 0x00000004
#define SQLITE_IOCAP_ATOMIC2K 0x00000008
#define SQLITE_IOCAP_ATOMIC4K 0x00000010
#define SQLITE_IOCAP_ATOMIC8K 0x00000020
#define SQLITE_IOCAP_ATOMIC16K 0x00000040
#define SQLITE_IOCAP_ATOMIC32K 0x00000080
#define SQLITE_IOCAP_ATOMIC64K 0x00000100
#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
/*
** CAPI3REF: File Locking Levels {F10250}
**
** {F10251} SQLite uses one of the following integer values as the second
** argument to calls it makes to the xLock() and xUnlock() methods
** of an [sqlite3_io_methods] object. {END}
*/
#define SQLITE_LOCK_NONE 0
#define SQLITE_LOCK_SHARED 1
#define SQLITE_LOCK_RESERVED 2
#define SQLITE_LOCK_PENDING 3
#define SQLITE_LOCK_EXCLUSIVE 4
/*
** CAPI3REF: Synchronization Type Flags {F10260}
**
** {F10261} When SQLite invokes the xSync() method of an
** [sqlite3_io_methods] object it uses a combination of the
** these integer values as the second argument.
**
** {F10262} When the SQLITE_SYNC_DATAONLY flag is used, it means that the
** sync operation only needs to flush data to mass storage. Inode
** information need not be flushed. {F10263} The SQLITE_SYNC_NORMAL means
** to use normal fsync() semantics. {F10264} The SQLITE_SYNC_FULL flag means
** to use Mac OS-X style fullsync instead of fsync().
*/
#define SQLITE_SYNC_NORMAL 0x00002
#define SQLITE_SYNC_FULL 0x00003
#define SQLITE_SYNC_DATAONLY 0x00010
/*
** CAPI3REF: OS Interface Open File Handle {F11110}
**
** An [sqlite3_file] object represents an open file in the OS
** interface layer. Individual OS interface implementations will
** want to subclass this object by appending additional fields
** for their own use. The pMethods entry is a pointer to an
** [sqlite3_io_methods] object that defines methods for performing
** I/O operations on the open file.
*/
typedef struct sqlite3_file sqlite3_file;
struct sqlite3_file {
int isOpen;
//const struct sqlite3_io_methods *pMethods; /* Methods for an open file */
};
/*
** CAPI3REF: OS Interface File Virtual Methods Object {F11120}
**
** Every file opened by the [sqlite3_vfs] xOpen method contains a pointer to
** an instance of the this object. This object defines the
** methods used to perform various operations against the open file.
**
** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
* The second choice is an
** OS-X style fullsync. The SQLITE_SYNC_DATA flag may be ORed in to
** indicate that only the data of the file and not its inode needs to be
** synced.
**
** The integer values to xLock() and xUnlock() are one of
** <ul>
** <li> [SQLITE_LOCK_NONE],
** <li> [SQLITE_LOCK_SHARED],
** <li> [SQLITE_LOCK_RESERVED],
** <li> [SQLITE_LOCK_PENDING], or
** <li> [SQLITE_LOCK_EXCLUSIVE].
** </ul>
** xLock() increases the lock. xUnlock() decreases the lock.
** The xCheckReservedLock() method looks
** to see if any database connection, either in this
** process or in some other process, is holding an RESERVED,
** PENDING, or EXCLUSIVE lock on the file. It returns true
** if such a lock exists and false if not.
**
** The xFileControl() method is a generic interface that allows custom
** VFS implementations to directly control an open file using the
** [sqlite3_file_control()] interface. The second "op" argument
** is an integer opcode. The third
** argument is a generic pointer which is intended to be a pointer
** to a structure that may contain arguments or space in which to
** write return values. Potential uses for xFileControl() might be
** functions to enable blocking locks with timeouts, to change the
** locking strategy (for example to use dot-file locks), to inquire
** about the status of a lock, or to break stale locks. The SQLite
** core reserves opcodes less than 100 for its own use.
** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
** Applications that define a custom xFileControl method should use opcodes
** greater than 100 to avoid conflicts.
**
** The xSectorSize() method returns the sector size of the
** device that underlies the file. The sector size is the
** minimum write that can be performed without disturbing
** other bytes in the file. The xDeviceCharacteristics()
** method returns a bit vector describing behaviors of the
** underlying device:
**
** <ul>
** <li> [SQLITE_IOCAP_ATOMIC]
** <li> [SQLITE_IOCAP_ATOMIC512]
** <li> [SQLITE_IOCAP_ATOMIC1K]
** <li> [SQLITE_IOCAP_ATOMIC2K]
** <li> [SQLITE_IOCAP_ATOMIC4K]
** <li> [SQLITE_IOCAP_ATOMIC8K]
** <li> [SQLITE_IOCAP_ATOMIC16K]
** <li> [SQLITE_IOCAP_ATOMIC32K]
** <li> [SQLITE_IOCAP_ATOMIC64K]
** <li> [SQLITE_IOCAP_SAFE_APPEND]
** <li> [SQLITE_IOCAP_SEQUENTIAL]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
** mean that writes of blocks that are nnn bytes in size and
** are aligned to an address which is an integer multiple of
** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
** that when data is appended to a file, the data is appended
** first then the size of the file is extended, never the other
** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
** to xWrite().
*/
/*typedef struct sqlite3_io_methods sqlite3_io_methods;
struct sqlite3_io_methods {
int iVersion;
int (*xClose)(sqlite3_file*);
int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst);
int (*xTruncate)(sqlite3_file*, sqlite3_int64 size);
int (*xSync)(sqlite3_file*, int flags);
int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
int (*xLock)(sqlite3_file*, int);
int (*xUnlock)(sqlite3_file*, int);
int (*xCheckReservedLock)(sqlite3_file*);
int (*xFileControl)(sqlite3_file*, int op, void *pArg);
int (*xSectorSize)(sqlite3_file*);
int (*xDeviceCharacteristics)(sqlite3_file*);
};*/
/*
** CAPI3REF: Standard File Control Opcodes {F11310}
**
** These integer constants are opcodes for the xFileControl method
** of the [sqlite3_io_methods] object and to the [sqlite3_file_control()]
** interface.
**
** {F11311} The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
** opcode cases the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. {F11312} This capability
** is used during testing and only needs to be supported when SQLITE_TEST
** is defined.
*/
#define SQLITE_FCNTL_LOCKSTATE 1
/*
** CAPI3REF: Mutex Handle {F17110}
**
** The mutex module within SQLite defines [sqlite3_mutex] to be an
** abstract type for a mutex object. {F17111} The SQLite core never looks
** at the internal representation of an [sqlite3_mutex]. {END} It only
** deals with pointers to the [sqlite3_mutex] object.
**
** Mutexes are created using [sqlite3_mutex_alloc()].
*/
typedef struct sqlite3_mutex sqlite3_mutex;
/*
** CAPI3REF: OS Interface Object {F11140}
**
** An instance of this object defines the interface between the
** SQLite core and the underlying operating system. The "vfs"
** in the name of the object stands for "virtual file system".
**
** The iVersion field is initially 1 but may be larger for future
** versions of SQLite. Additional fields may be appended to this
** object when the iVersion value is increased.
**
** The szOsFile field is the size of the subclassed [sqlite3_file]
** structure used by this VFS. mxPathname is the maximum length of
** a pathname in this VFS.
**
** Registered vfs modules are kept on a linked list formed by
** the pNext pointer. The [sqlite3_vfs_register()]
** and [sqlite3_vfs_unregister()] interfaces manage this list
** in a thread-safe way. The [sqlite3_vfs_find()] interface
** searches the list.
**
** The pNext field is the only fields in the sqlite3_vfs
** structure that SQLite will ever modify. SQLite will only access
** or modify this field while holding a particular static mutex.
** The application should never modify anything within the sqlite3_vfs
** object once the object has been registered.
**
** The zName field holds the name of the VFS module. The name must
** be unique across all VFS modules.
**
** {F11141} SQLite will guarantee that the zFilename string passed to
** xOpen() is a full pathname as generated by xFullPathname() and
** that the string will be valid and unchanged until xClose() is
** called. {END} So the [sqlite3_file] can store a pointer to the
** filename if it needs to remember the filename for some reason.
**
** {F11142} The flags argument to xOpen() includes all bits set in
** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
** or [sqlite3_open16()] is used, then flags includes at least
** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. {END}
** If xOpen() opens a file read-only then it sets *pOutFlags to
** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be
** set.
**
** {F11143} SQLite will also add one of the following flags to the xOpen()
** call, depending on the object being opened:
**
** <ul>
** <li> [SQLITE_OPEN_MAIN_DB]
** <li> [SQLITE_OPEN_MAIN_JOURNAL]
** <li> [SQLITE_OPEN_TEMP_DB]
** <li> [SQLITE_OPEN_TEMP_JOURNAL]
** <li> [SQLITE_OPEN_TRANSIENT_DB]
** <li> [SQLITE_OPEN_SUBJOURNAL]
** <li> [SQLITE_OPEN_MASTER_JOURNAL]
** </ul> {END}
**
** The file I/O implementation can use the object type flags to
** changes the way it deals with files. For example, an application
** that does not care about crash recovery or rollback, might make
** the open of a journal file a no-op. Writes to this journal are
** also a no-op. Any attempt to read the journal return SQLITE_IOERR.
** Or the implementation might recognize the a database file will
** be doing page-aligned sector reads and writes in a random order
** and set up its I/O subsystem accordingly.
**
** {F11144} SQLite might also add one of the following flags to the xOpen
** method:
**
** <ul>
** <li> [SQLITE_OPEN_DELETEONCLOSE]
** <li> [SQLITE_OPEN_EXCLUSIVE]
** </ul>
**
** {F11145} The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
** deleted when it is closed. {F11146} The [SQLITE_OPEN_DELETEONCLOSE]
** will be set for TEMP databases, journals and for subjournals.
** {F11147} The [SQLITE_OPEN_EXCLUSIVE] flag means the file should be opened
** for exclusive access. This flag is set for all files except
** for the main database file. {END}
**
** {F11148} At least szOsFile bytes of memory is allocated by SQLite
** to hold the [sqlite3_file] structure passed as the third
** argument to xOpen. {END} The xOpen method does not have to
** allocate the structure; it should just fill it in.
**
** {F11149} The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
** to test for the existance of a file,
** or [SQLITE_ACCESS_READWRITE] to test to see
** if a file is readable and writable, or [SQLITE_ACCESS_READ]
** to test to see if a file is at least readable. {END} The file can be a
** directory.
**
** {F11150} SQLite will always allocate at least mxPathname+1 byte for
** the output buffers for xGetTempname and xFullPathname. {F11151} The exact
** size of the output buffer is also passed as a parameter to both
** methods. {END} If the output buffer is not large enough, SQLITE_CANTOPEN
** should be returned. As this is handled as a fatal error by SQLite,
** vfs implementations should endeavor to prevent this by setting
** mxPathname to a sufficiently large value.
**
** The xRandomness(), xSleep(), and xCurrentTime() interfaces
** are not strictly a part of the filesystem, but they are
** included in the VFS structure for completeness.
** The xRandomness() function attempts to return nBytes bytes
** of good-quality randomness into zOut. The return value is
** the actual number of bytes of randomness obtained. The
** xSleep() method cause the calling thread to sleep for at
** least the number of microseconds given. The xCurrentTime()
** method returns a Julian Day Number for the current date and
** time.
*/
typedef struct sqlite3_vfs sqlite3_vfs;
struct sqlite3_vfs {
int iVersion; /* Structure version number */
int szOsFile; /* Size of subclassed sqlite3_file */
int mxPathname; /* Maximum file pathname length */
sqlite3_vfs *pNext; /* Next registered VFS */
const char *zName; /* Name of this virtual file system */
void *pAppData; /* Pointer to application-specific data */
/* int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
int flags, int *pOutFlags);
int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
int (*xAccess)(sqlite3_vfs*, const char *zName, int flags);
int (*xGetTempname)(sqlite3_vfs*, int nOut, char *zOut);
int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
void *(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol);
void (*xDlClose)(sqlite3_vfs*, void*);
int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
int (*xSleep)(sqlite3_vfs*, int microseconds);
int (*xCurrentTime)(sqlite3_vfs*, double*);*/
/* New fields may be appended in figure versions. The iVersion
** value will increment whenever this happens. */
};
/*
** CAPI3REF: Flags for the xAccess VFS method {F11190}
**
** {F11191} These integer constants can be used as the third parameter to
** the xAccess method of an [sqlite3_vfs] object. {END} They determine
** the kind of what kind of permissions the xAccess method is
** looking for. {F11192} With SQLITE_ACCESS_EXISTS, the xAccess method
** simply checks to see if the file exists. {F11193} With
** SQLITE_ACCESS_READWRITE, the xAccess method checks to see
** if the file is both readable and writable. {F11194} With
** SQLITE_ACCESS_READ the xAccess method
** checks to see if the file is readable.
*/
#define SQLITE_ACCESS_EXISTS 0
#define SQLITE_ACCESS_READWRITE 1
#define SQLITE_ACCESS_READ 2
/*
** CAPI3REF: Enable Or Disable Extended Result Codes {F12200}
**
** {F12201} The sqlite3_extended_result_codes() routine enables or disables the
** [SQLITE_IOERR_READ | extended result codes] feature on a database
** connection if its 2nd parameter is
** non-zero or zero, respectively. {F12202}
** By default, SQLite API routines return one of only 26 integer
** [SQLITE_OK | result codes]. {F12203} When extended result codes
** are enabled by this routine, the repetoire of result codes can be
** much larger and can (hopefully) provide more detailed information
** about the cause of an error.
**
** {F12204} The second argument is a boolean value that turns extended result
** codes on and off. {F12205} Extended result codes are off by default for
** backwards compatibility with older versions of SQLite.
*/
/*IMPORT_C*/ int sqlite3_extended_result_codes(sqlite3*, int onoff);
/*
** CAPI3REF: Last Insert Rowid {F12220}
**
** {F12221} Each entry in an SQLite table has a unique 64-bit signed
** integer key called the "rowid". {F12222} The rowid is always available
** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
** names are not also used by explicitly declared columns. {F12223} If
** the table has a column of type INTEGER PRIMARY KEY then that column
** is another an alias for the rowid.
**
** {F12224} This routine returns the rowid of the most recent
** successful INSERT into the database from the database connection
** shown in the first argument. {F12225} If no successful inserts
** have ever occurred on this database connection, zero is returned.
**
** {F12226} If an INSERT occurs within a trigger, then the rowid of the
** inserted row is returned by this routine as long as the trigger
** is running. {F12227} But once the trigger terminates, the value returned
** by this routine reverts to the last value inserted before the
** trigger fired.
**
** {F12228} An INSERT that fails due to a constraint violation is not a
** successful insert and does not change the value returned by this
** routine. {F12229} Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
** and INSERT OR ABORT make no changes to the return value of this
** routine when their insertion fails. {F12231} When INSERT OR REPLACE
** encounters a constraint violation, it does not fail. The
** INSERT continues to completion after deleting rows that caused
** the constraint problem so INSERT OR REPLACE will always change
** the return value of this interface.
**
** {UF12232} If another thread does a new insert on the same database connection
** while this routine is running and thus changes the last insert rowid,
** then the return value of this routine is undefined.
*/
/*IMPORT_C*/ sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
/*
** CAPI3REF: Count The Number Of Rows Modified {F12240}
**
** {F12241} This function returns the number of database rows that were changed
** or inserted or deleted by the most recently completed SQL statement
** on the connection specified by the first parameter. {F12242} Only
** changes that are directly specified by the INSERT, UPDATE, or
** DELETE statement are counted. Auxiliary changes caused by
** triggers are not counted. {F12243} Use the [sqlite3_total_changes()] function
** to find the total number of changes including changes caused by triggers.
**
** {F12244} Within the body of a trigger, the sqlite3_changes() interface
** can be called to find the number of
** changes in the most recently completed INSERT, UPDATE, or DELETE
** statement within the body of the same trigger.
**
** {F12245} All changes are counted, even if they are later undone by a
** ROLLBACK or ABORT. {F12246} Except, changes associated with creating and
** dropping tables are not counted.
**
** {F12247} If a callback invokes [sqlite3_exec()] or [sqlite3_step()]
** recursively, then the changes in the inner, recursive call are
** counted together with the changes in the outer call.
**
** {F12248} SQLite implements the command "DELETE FROM table" without
** a WHERE clause by dropping and recreating the table. (This is much
** faster than going through and deleting individual elements from the
** table.) Because of this optimization, the change count for
** "DELETE FROM table" will be zero regardless of the number of elements
** that were originally in the table. {F12251} To get an accurate count
** of the number of rows deleted, use
** "DELETE FROM table WHERE 1" instead.
**
** {UF12252} If another thread makes changes on the same database connection
** while this routine is running then the return value of this routine
** is undefined.
*/
/*IMPORT_C*/ int sqlite3_changes(sqlite3*);
/*
** CAPI3REF: Total Number Of Rows Modified {F12260}
***
** {F12261} This function returns the number of database rows that have been
** modified by INSERT, UPDATE or DELETE statements since the database handle
** was opened. {F12262} The count includes UPDATE, INSERT and DELETE
** statements executed as part of trigger programs. {F12263} All changes
** are counted as soon as the statement that makes them is completed
** (when the statement handle is passed to [sqlite3_reset()] or
** [sqlite3_finalize()]). {END}
**
** See also the [sqlite3_change()] interface.
**
** {F12265} SQLite implements the command "DELETE FROM table" without
** a WHERE clause by dropping and recreating the table. (This is much
** faster than going
** through and deleting individual elements form the table.) Because of
** this optimization, the change count for "DELETE FROM table" will be
** zero regardless of the number of elements that were originally in the
** table. To get an accurate count of the number of rows deleted, use
** "DELETE FROM table WHERE 1" instead.
**
** {U12264} If another thread makes changes on the same database connection
** while this routine is running then the return value of this routine
** is undefined. {END}
*/
/*IMPORT_C*/ int sqlite3_total_changes(sqlite3*);
/*
** CAPI3REF: Interrupt A Long-Running Query {F12270}
**
** {F12271} This function causes any pending database operation to abort and
** return at its earliest opportunity. {END} This routine is typically
** called in response to a user action such as pressing "Cancel"
** or Ctrl-C where the user wants a long query operation to halt
** immediately.
**
** {F12272} It is safe to call this routine from a thread different from the
** thread that is currently running the database operation. {U12273} But it
** is not safe to call this routine with a database connection that
** is closed or might close before sqlite3_interrupt() returns.
**
** If an SQL is very nearly finished at the time when sqlite3_interrupt()
** is called, then it might not have an opportunity to be interrupted.
** It might continue to completion.
** {F12274} The SQL operation that is interrupted will return
** [SQLITE_INTERRUPT]. {F12275} If the interrupted SQL operation is an
** INSERT, UPDATE, or DELETE that is inside an explicit transaction,
** then the entire transaction will be rolled back automatically.
** {F12276} A call to sqlite3_interrupt() has no effect on SQL statements
** that are started after sqlite3_interrupt() returns.
*/
/*IMPORT_C*/ void sqlite3_interrupt(sqlite3*);
/*
** CAPI3REF: Determine If An SQL Statement Is Complete {F10510}
**
** These routines are useful for command-line input to determine if the
** currently entered text seems to form complete a SQL statement or
** if additional input is needed before sending the text into
** SQLite for parsing. These routines return true if the input string
** appears to be a complete SQL statement. A statement is judged to be
** complete if it ends with a semicolon and is not a fragment of a
** CREATE TRIGGER statement. These routines do not parse the SQL and
** so will not detect syntactically incorrect SQL.
**
** {F10511} These functions return true if the given input string
** ends with a semicolon optionally followed by whitespace or
** comments. {F10512} For sqlite3_complete(),
** the parameter must be a zero-terminated UTF-8 string. {F10513} For
** sqlite3_complete16(), a zero-terminated machine byte order UTF-16 string
** is required. {F10514} These routines return false if the terminal
** semicolon is within a comment, a string literal or a quoted identifier
** (in other words if the final semicolon is not really a separate token
** but part of a larger token) or if the final semicolon is
** in between the BEGIN and END keywords of a CREATE TRIGGER statement.
** {END}
*/
/*IMPORT_C*/ int sqlite3_complete(const char *sql);
/*IMPORT_C*/ int sqlite3_complete16(const void *sql);
/*
** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {F12310}
**
** {F12311} This routine identifies a callback function that might be
** invoked whenever an attempt is made to open a database table
** that another thread or process has locked.
** {F12312} If the busy callback is NULL, then [SQLITE_BUSY]
** or [SQLITE_IOERR_BLOCKED]
** is returned immediately upon encountering the lock.
** {F12313} If the busy callback is not NULL, then the
** callback will be invoked with two arguments. {F12314} The
** first argument to the handler is a copy of the void* pointer which
** is the third argument to this routine. {F12315} The second argument to
** the handler is the number of times that the busy handler has
** been invoked for this locking event. {F12316} If the
** busy callback returns 0, then no additional attempts are made to
** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
** {F12317} If the callback returns non-zero, then another attempt
** is made to open the database for reading and the cycle repeats.
**
** The presence of a busy handler does not guarantee that
** it will be invoked when there is lock contention. {F12319}
** If SQLite determines that invoking the busy handler could result in
** a deadlock, it will go ahead and return [SQLITE_BUSY] or
** [SQLITE_IOERR_BLOCKED] instead of invoking the
** busy handler. {END}
** Consider a scenario where one process is holding a read lock that
** it is trying to promote to a reserved lock and
** a second process is holding a reserved lock that it is trying
** to promote to an exclusive lock. The first process cannot proceed
** because it is blocked by the second and the second process cannot
** proceed because it is blocked by the first. If both processes
** invoke the busy handlers, neither will make any progress. Therefore,
** SQLite returns [SQLITE_BUSY] for the first process, hoping that this
** will induce the first process to release its read lock and allow
** the second process to proceed.
**
** {F12321} The default busy callback is NULL. {END}
**
** {F12322} The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
** when SQLite is in the middle of a large transaction where all the
** changes will not fit into the in-memory cache. {F12323} SQLite will
** already hold a RESERVED lock on the database file, but it needs
** to promote this lock to EXCLUSIVE so that it can spill cache
** pages into the database file without harm to concurrent
** readers. {F12324} If it is unable to promote the lock, then the in-memory
** cache will be left in an inconsistent state and so the error
** code is promoted from the relatively benign [SQLITE_BUSY] to
** the more severe [SQLITE_IOERR_BLOCKED]. {F12325} This error code promotion
** forces an automatic rollback of the changes. {END} See the
** <a href="http://www.sqlite.org/cvstrac/wiki?p=CorruptionFollowingBusyError">
** CorruptionFollowingBusyError</a> wiki page for a discussion of why
** this is important.
**
** {F12326} Sqlite is re-entrant, so the busy handler may start a new
** query. {END} (It is not clear why anyone would every want to do this,
** but it is allowed, in theory.) {U12327} But the busy handler may not
** close the database. Closing the database from a busy handler will delete
** data structures out from under the executing query and will
** probably result in a segmentation fault or other runtime error. {END}
**
** {F12328} There can only be a single busy handler defined for each database
** connection. Setting a new busy handler clears any previous one.
** {F12329} Note that calling [sqlite3_busy_timeout()] will also set or clear
** the busy handler.
**
** {F12331} When operating in [sqlite3_enable_shared_cache | shared cache mode],
** only a single busy handler can be defined for each database file.
** So if two database connections share a single cache, then changing
** the busy handler on one connection will also change the busy
** handler in the other connection. {F12332} The busy handler is invoked
** in the thread that was running when the lock contention occurs.
*/
/*IMPORT_C*/ int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
/*
** CAPI3REF: Set A Busy Timeout {F12340}
**
** {F12341} This routine sets a [sqlite3_busy_handler | busy handler]
** that sleeps for a while when a
** table is locked. {F12342} The handler will sleep multiple times until
** at least "ms" milliseconds of sleeping have been done. {F12343} After
** "ms" milliseconds of sleeping, the handler returns 0 which
** causes [sqlite3_step()] to return [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
**
** {F12344} Calling this routine with an argument less than or equal to zero
** turns off all busy handlers.
**
** {F12345} There can only be a single busy handler for a particular database
** connection. If another busy handler was defined
** (using [sqlite3_busy_handler()]) prior to calling
** this routine, that other busy handler is cleared.
*/
/*IMPORT_C*/ int sqlite3_busy_timeout(sqlite3*, int ms);
/*
** CAPI3REF: Convenience Routines For Running Queries {F12370}
**
** This next routine is a convenience wrapper around [sqlite3_exec()].
** {F12371} Instead of invoking a user-supplied callback for each row of the
** result, this routine remembers each row of the result in memory
** obtained from [sqlite3_malloc()], then returns all of the result after the
** query has finished. {F12372}
**
** As an example, suppose the query result where this table:
**
** <blockquote><pre>
** Name | Age
** -----------------------
** Alice | 43
** Bob | 28
** Cindy | 21
** </pre></blockquote>
**
** If the 3rd argument were &azResult then after the function returns
** azResult will contain the following data:
**
** <blockquote><pre>
** azResult[0] = "Name";
** azResult[1] = "Age";
** azResult[2] = "Alice";
** azResult[3] = "43";
** azResult[4] = "Bob";
** azResult[5] = "28";
** azResult[6] = "Cindy";
** azResult[7] = "21";
** </pre></blockquote>
**
** Notice that there is an extra row of data containing the column
** headers. But the *nrow return value is still 3. *ncolumn is
** set to 2. In general, the number of values inserted into azResult
** will be ((*nrow) + 1)*(*ncolumn).
**
** {U12374} After the calling function has finished using the result, it should
** pass the result data pointer to sqlite3_free_table() in order to
** release the memory that was malloc-ed. Because of the way the
** [sqlite3_malloc()] happens, the calling function must not try to call
** [sqlite3_free()] directly. Only [sqlite3_free_table()] is able to release
** the memory properly and safely. {END}
**
** {F12373} The return value of this routine is the same as
** from [sqlite3_exec()].
*/
/*IMPORT_C*/ int sqlite3_get_table(
sqlite3*, /* An open database */
const char *sql, /* SQL to be executed */
char ***resultp, /* Result written to a char *[] that this points to */
int *nrow, /* Number of result rows written here */
int *ncolumn, /* Number of result columns written here */
char **errmsg /* Error msg written here */
);
/*IMPORT_C*/ void sqlite3_free_table(char **result);
/*
** CAPI3REF: Formatted String Printing Functions {F17400}
**
** These routines are workalikes of the "printf()" family of functions
** from the standard C library.
**
** {F17401} The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
** results into memory obtained from [sqlite3_malloc()].
** {U17402} The strings returned by these two routines should be
** released by [sqlite3_free()]. {F17403} Both routines return a
** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
** memory to hold the resulting string.
**
** {F17404} In sqlite3_snprintf() routine is similar to "snprintf()" from
** the standard C library. The result is written into the
** buffer supplied as the second parameter whose size is given by
** the first parameter. {END} Note that the order of the
** first two parameters is reversed from snprintf(). This is an
** historical accident that cannot be fixed without breaking
** backwards compatibility. {F17405} Note also that sqlite3_snprintf()
** returns a pointer to its buffer instead of the number of
** characters actually written into the buffer. {END} We admit that
** the number of characters written would be a more useful return
** value but we cannot change the implementation of sqlite3_snprintf()
** now without breaking compatibility.
**
** {F17406} As long as the buffer size is greater than zero, sqlite3_snprintf()
** guarantees that the buffer is always zero-terminated. {F17407} The first
** parameter "n" is the total size of the buffer, including space for
** the zero terminator. {END} So the longest string that can be completely
** written will be n-1 characters.
**
** These routines all implement some additional formatting
** options that are useful for constructing SQL statements.
** All of the usual printf formatting options apply. In addition, there
** is are "%q", "%Q", and "%z" options.
**
** {F17410} The %q option works like %s in that it substitutes a null-terminated
** string from the argument list. But %q also doubles every '\'' character.
** %q is designed for use inside a string literal. {END} By doubling each '\''
** character it escapes that character and allows it to be inserted into
** the string.
**
** For example, so some string variable contains text as follows:
**
** <blockquote><pre>
** char *zText = "It's a happy day!";
** </pre></blockquote>
**
** One can use this text in an SQL statement as follows:
**
** <blockquote><pre>
** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
** sqlite3_exec(db, zSQL, 0, 0, 0);
** sqlite3_free(zSQL);
** </pre></blockquote>
**
** Because the %q format string is used, the '\'' character in zText
** is escaped and the SQL generated is as follows:
**
** <blockquote><pre>
** INSERT INTO table1 VALUES('It''s a happy day!')
** </pre></blockquote>
**
** This is correct. Had we used %s instead of %q, the generated SQL
** would have looked like this:
**
** <blockquote><pre>
** INSERT INTO table1 VALUES('It's a happy day!');
** </pre></blockquote>
**
** This second example is an SQL syntax error. As a general rule you
** should always use %q instead of %s when inserting text into a string
** literal.
**
** {F17411} The %Q option works like %q except it also adds single quotes around
** the outside of the total string. Or if the parameter in the argument
** list is a NULL pointer, %Q substitutes the text "NULL" (without single
** quotes) in place of the %Q option. {END} So, for example, one could say:
**
** <blockquote><pre>
** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
** sqlite3_exec(db, zSQL, 0, 0, 0);
** sqlite3_free(zSQL);
** </pre></blockquote>
**
** The code above will render a correct SQL statement in the zSQL
** variable even if the zText variable is a NULL pointer.
**
** {F17412} The "%z" formatting option works exactly like "%s" with the
** addition that after the string has been read and copied into
** the result, [sqlite3_free()] is called on the input string. {END}
*/
/*IMPORT_C*/ char *sqlite3_mprintf(const char*,...);
/*IMPORT_C*/ char *sqlite3_vmprintf(const char*, va_list);
/*IMPORT_C*/ char *sqlite3_snprintf(int,char*,const char*, ...);
/*
** CAPI3REF: Memory Allocation Subsystem {F17300}
**
** {F17301} The SQLite core uses these three routines for all of its own
** internal memory allocation needs. {END} "Core" in the previous sentence
** does not include operating-system specific VFS implementation. The
** windows VFS uses native malloc and free for some operations.
**
** {F17302} The sqlite3_malloc() routine returns a pointer to a block
** of memory at least N bytes in length, where N is the parameter.
** {F17303} If sqlite3_malloc() is unable to obtain sufficient free
** memory, it returns a NULL pointer. {F17304} If the parameter N to
** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
** a NULL pointer.
**
** {F17305} Calling sqlite3_free() with a pointer previously returned
** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
** that it might be reused. {F17306} The sqlite3_free() routine is
** a no-op if is called with a NULL pointer. Passing a NULL pointer
** to sqlite3_free() is harmless. {U17307} After being freed, memory
** should neither be read nor written. Even reading previously freed
** memory might result in a segmentation fault or other severe error.
** {U17309} Memory corruption, a segmentation fault, or other severe error
** might result if sqlite3_free() is called with a non-NULL pointer that
** was not obtained from sqlite3_malloc() or sqlite3_free().
**
** {F17310} The sqlite3_realloc() interface attempts to resize a
** prior memory allocation to be at least N bytes, where N is the
** second parameter. The memory allocation to be resized is the first
** parameter. {F17311} If the first parameter to sqlite3_realloc()
** is a NULL pointer then its behavior is identical to calling
** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
** {F17312} If the second parameter to sqlite3_realloc() is zero or
** negative then the behavior is exactly the same as calling
** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
** {F17313} Sqlite3_realloc() returns a pointer to a memory allocation
** of at least N bytes in size or NULL if sufficient memory is unavailable.
** {F17314} If M is the size of the prior allocation, then min(N,M) bytes
** of the prior allocation are copied into the beginning of buffer returned
** by sqlite3_realloc() and the prior allocation is freed.
** {F17315} If sqlite3_realloc() returns NULL, then the prior allocation
** is not freed.
**
** {F17316} The memory returned by sqlite3_malloc() and sqlite3_realloc()
** is always aligned to at least an 8 byte boundary. {END}
**
** {F17381} The default implementation
** of the memory allocation subsystem uses the malloc(), realloc()
** and free() provided by the standard C library. {F17382} However, if
** SQLite is compiled with the following C preprocessor macro
**
** <blockquote> SQLITE_MEMORY_SIZE=<i>NNN</i> </blockquote>
**
** where <i>NNN</i> is an integer, then SQLite create a static
** array of at least <i>NNN</i> bytes in size and use that array
** for all of its dynamic memory allocation needs. {END} Additional
** memory allocator options may be added in future releases.
**
** In SQLite version 3.5.0 and 3.5.1, it was possible to define
** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
** implementation of these routines to be omitted. That capability
** is no longer provided. Only built-in memory allocators can be
** used.
**
** The windows OS interface layer calls
** the system malloc() and free() directly when converting
** filenames between the UTF-8 encoding used by SQLite
** and whatever filename encoding is used by the particular windows
** installation. Memory allocation errors are detected, but
** they are reported back as [SQLITE_CANTOPEN] or
** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
*/
/*IMPORT_C*/ void *sqlite3_malloc(int);
/*IMPORT_C*/ void *sqlite3_realloc(void*, int);
/*IMPORT_C*/ void sqlite3_free(void*);
/*
** CAPI3REF: Memory Allocator Statistics {F17370}
**
** In addition to the basic three allocation routines
** [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()],
** the memory allocation subsystem included with the SQLite
** sources provides the interfaces shown here.
**
** {F17371} The sqlite3_memory_used() routine returns the
** number of bytes of memory currently outstanding (malloced but not freed).
** {F17372} The value returned by sqlite3_memory_used() includes
** any overhead added by SQLite, but not overhead added by the
** library malloc() that backs the sqlite3_malloc() implementation.
** {F17373} The sqlite3_memory_highwater() routines returns the
** maximum number of bytes that have been outstanding at any time
** since the highwater mark was last reset.
** {F17374} The byte count returned by sqlite3_memory_highwater()
** uses the same byte counting rules as sqlite3_memory_used(). {END}
** In other words, overhead added internally by SQLite is counted,
** but overhead from the underlying system malloc is not.
** {F17375} If the parameter to sqlite3_memory_highwater() is true,
** then the highwater mark is reset to the current value of
** sqlite3_memory_used() and the prior highwater mark (before the
** reset) is returned. {F17376} If the parameter to
** sqlite3_memory_highwater() is zero, then the highwater mark is
** unchanged.
*/
/*IMPORT_C*/ sqlite3_int64 sqlite3_memory_used(void);
/*IMPORT_C*/ sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
/*
** CAPI3REF: Compile-Time Authorization Callbacks {F12500}
**
** {F12501} This routine registers a authorizer callback with a particular
** database connection, supplied in the first argument. {F12502}
** The authorizer callback is invoked as SQL statements are being compiled
** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. {F12503} At various
** points during the compilation process, as logic is being created
** to perform various actions, the authorizer callback is invoked to
** see if those actions are allowed. The authorizer callback should
** return SQLITE_OK to allow the action, [SQLITE_IGNORE] to disallow the
** specific action but allow the SQL statement to continue to be
** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
** rejected with an error. {F12504} If the authorizer callback returns
** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
** then [sqlite3_prepare_v2()] or equivalent call that triggered
** the authorizer shall
** fail with an SQLITE_ERROR error code and an appropriate error message. {END}
**
** When the callback returns [SQLITE_OK], that means the operation
** requested is ok. {F12505} When the callback returns [SQLITE_DENY], the
** [sqlite3_prepare_v2()] or equivalent call that triggered the
** authorizer shall fail
** with an SQLITE_ERROR error code and an error message explaining that
** access is denied. {F12506} If the authorizer code (the 2nd parameter
** to the authorizer callback is anything other than [SQLITE_READ], then
** a return of [SQLITE_IGNORE] has the same effect as [SQLITE_DENY].
** If the authorizer code is [SQLITE_READ] and the callback returns
** [SQLITE_IGNORE] then the prepared statement is constructed to
** insert a NULL value in place of the table column that would have
** been read if [SQLITE_OK] had been returned. {END}
**
** {F12510} The first parameter to the authorizer callback is a copy of
** the third parameter to the sqlite3_set_authorizer() interface.
** {F12511} The second parameter to the callback is an integer
** [SQLITE_COPY | action code] that specifies the particular action
** to be authorized. {END} The available action codes are
** [SQLITE_COPY | documented separately]. {F12512} The third through sixth
** parameters to the callback are zero-terminated strings that contain
** additional details about the action to be authorized. {END}
**
** An authorizer is used when preparing SQL statements from an untrusted
** source, to ensure that the SQL statements do not try to access data
** that they are not allowed to see, or that they do not try to
** execute malicious statements that damage the database. For
** example, an application may allow a user to enter arbitrary
** SQL queries for evaluation by a database. But the application does
** not want the user to be able to make arbitrary changes to the
** database. An authorizer could then be put in place while the
** user-entered SQL is being prepared that disallows everything
** except SELECT statements.
**
** {F12520} Only a single authorizer can be in place on a database connection
** at a time. Each call to sqlite3_set_authorizer overrides the
** previous call. {F12521} A NULL authorizer means that no authorization
** callback is invoked. {F12522} The default authorizer is NULL. {END}
**
** Note that the authorizer callback is invoked only during
** [sqlite3_prepare()] or its variants. {F12523} Authorization is not
** performed during statement evaluation in [sqlite3_step()]. {END}
*/
/*IMPORT_C*/ int sqlite3_set_authorizer(
sqlite3*,
int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
void *pUserData
);
/*
** CAPI3REF: Authorizer Return Codes {F12590}
**
** The [sqlite3_set_authorizer | authorizer callback function] must
** return either [SQLITE_OK] or one of these two constants in order
** to signal SQLite whether or not the action is permitted. See the
** [sqlite3_set_authorizer | authorizer documentation] for additional
** information.
*/
#define SQLITE_DENY 1 /* Abort the SQL statement with an error */
#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
/*
** CAPI3REF: Authorizer Action Codes {F12550}
**
** The [sqlite3_set_authorizer()] interface registers a callback function
** that is invoked to authorizer certain SQL statement actions. {F12551} The
** second parameter to the callback is an integer code that specifies
** what action is being authorized. These are the integer action codes that
** the authorizer callback may be passed. {END}
**
** These action code values signify what kind of operation is to be
** authorized. {F12552} The 3rd and 4th parameters to the authorization
** callback function will be parameters or NULL depending on which of these
** codes is used as the second parameter. {F12553} The 5th parameter to the
** authorizer callback is the name of the database ("main", "temp",
** etc.) if applicable. {F12554} The 6th parameter to the authorizer callback
** is the name of the inner-most trigger or view that is responsible for
** the access attempt or NULL if this access attempt is directly from
** top-level SQL code.
*/
/******************************************* 3rd ************ 4th ***********/
#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */
#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */
#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */
#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */
#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */
#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */
#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */
#define SQLITE_CREATE_VIEW 8 /* View Name NULL */
#define SQLITE_DELETE 9 /* Table Name NULL */
#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */
#define SQLITE_DROP_TABLE 11 /* Table Name NULL */
#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */
#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */
#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */
#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */
#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */
#define SQLITE_DROP_VIEW 17 /* View Name NULL */
#define SQLITE_INSERT 18 /* Table Name NULL */
#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */
#define SQLITE_READ 20 /* Table Name Column Name */
#define SQLITE_SELECT 21 /* NULL NULL */
#define SQLITE_TRANSACTION 22 /* NULL NULL */
#define SQLITE_UPDATE 23 /* Table Name Column Name */
#define SQLITE_ATTACH 24 /* Filename NULL */
#define SQLITE_DETACH 25 /* Database Name NULL */
#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */
#define SQLITE_REINDEX 27 /* Index Name NULL */
#define SQLITE_ANALYZE 28 /* Table Name NULL */
#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */
#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */
#define SQLITE_FUNCTION 31 /* Function Name NULL */
#define SQLITE_COPY 0 /* No longer used */
/*
** CAPI3REF: Tracing And Profiling Functions {F12280}
**
** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.
**
** {F12281} The callback function registered by sqlite3_trace() is invoked
** at the first [sqlite3_step()] for the evaluation of an SQL statement.
** {F12282} Only a single trace callback can be registered at a time.
** Each call to sqlite3_trace() overrides the previous. {F12283} A
** NULL callback for sqlite3_trace() disables tracing. {F12284} The
** first argument to the trace callback is a copy of the pointer which
** was the 3rd argument to sqlite3_trace. {F12285} The second argument
** to the trace callback is a zero-terminated UTF8 string containing
** the original text of the SQL statement as it was passed into
** [sqlite3_prepare_v2()] or the equivalent. {END} Note that the
** host parameter are not expanded in the SQL statement text.
**
** {F12287} The callback function registered by sqlite3_profile() is invoked
** as each SQL statement finishes. {F12288} The first parameter to the
** profile callback is a copy of the 3rd parameter to sqlite3_profile().
** {F12289} The second parameter to the profile callback is a
** zero-terminated UTF-8 string that contains the complete text of
** the SQL statement as it was processed by [sqlite3_prepare_v2()] or
** the equivalent. {F12290} The third parameter to the profile
** callback is an estimate of the number of nanoseconds of
** wall-clock time required to run the SQL statement from start
** to finish. {END}
**
** The sqlite3_profile() API is currently considered experimental and
** is subject to change.
*/
/*IMPORT_C*/ void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
/*IMPORT_C*/ void *sqlite3_profile(sqlite3*,
void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
/*
** CAPI3REF: Query Progress Callbacks {F12910}
**
** {F12911} This routine configures a callback function - the
** progress callback - that is invoked periodically during long
** running calls to [sqlite3_exec()], [sqlite3_step()] and
** [sqlite3_get_table()]. {END} An example use for this
** interface is to keep a GUI updated during a large query.
**
** {F12912} The progress callback is invoked once for every N virtual
** machine opcodes, where N is the second argument to this function.
** {F12913} The progress callback itself is identified by the third
** argument to this function. {F12914} The fourth argument to this
** function is a void pointer passed to the progress callback
** function each time it is invoked. {END}
**
** {F12915} If a call to [sqlite3_exec()], [sqlite3_step()], or
** [sqlite3_get_table()] results in fewer than N opcodes being executed,
** then the progress callback is never invoked. {END}
**
** {F12916} Only a single progress callback function may be registered for each
** open database connection. Every call to sqlite3_progress_handler()
** overwrites the results of the previous call. {F12917}
** To remove the progress callback altogether, pass NULL as the third
** argument to this function. {END}
**
** {F12918} If the progress callback returns a result other than 0, then
** the current query is immediately terminated and any database changes
** rolled back. {F12919}
** The containing [sqlite3_exec()], [sqlite3_step()], or
** [sqlite3_get_table()] call returns SQLITE_INTERRUPT. {END} This feature
** can be used, for example, to implement the "Cancel" button on a
** progress dialog box in a GUI.
*/
/*IMPORT_C*/ void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
/*
** CAPI3REF: Opening A New Database Connection {F12700}
**
** {F12701} These routines open an SQLite database file whose name
** is given by the filename argument.
** {F12702} The filename argument is interpreted as UTF-8
** for [sqlite3_open()] and [sqlite3_open_v2()] and as UTF-16
** in the native byte order for [sqlite3_open16()].
** {F12703} An [sqlite3*] handle is returned in *ppDb, even
** if an error occurs. {F12723} (Exception: if SQLite is unable
** to allocate memory to hold the [sqlite3] object, a NULL will
** be written into *ppDb instead of a pointer to the [sqlite3] object.)
** {F12704} If the database is opened (and/or created)
** successfully, then [SQLITE_OK] is returned. {F12705} Otherwise an
** error code is returned. {F12706} The
** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
** an English language description of the error.
**
** {F12707} The default encoding for the database will be UTF-8 if
** [sqlite3_open()] or [sqlite3_open_v2()] is called and
** UTF-16 in the native byte order if [sqlite3_open16()] is used.
**
** {F12708} Whether or not an error occurs when it is opened, resources
** associated with the [sqlite3*] handle should be released by passing it
** to [sqlite3_close()] when it is no longer required.
**
** {F12709} The [sqlite3_open_v2()] interface works like [sqlite3_open()]
** except that it acccepts two additional parameters for additional control
** over the new database connection. {F12710} The flags parameter can be
** one of:
**
** <ol>
** <li> [SQLITE_OPEN_READONLY]
** <li> [SQLITE_OPEN_READWRITE]
** <li> [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]
** </ol>
**
** {F12711} The first value opens the database read-only.
** {F12712} If the database does not previously exist, an error is returned.
** {F12713} The second option opens
** the database for reading and writing if possible, or reading only if
** if the file is write protected. {F12714} In either case the database
** must already exist or an error is returned. {F12715} The third option
** opens the database for reading and writing and creates it if it does
** not already exist. {F12716}
** The third options is behavior that is always used for [sqlite3_open()]
** and [sqlite3_open16()].
**
** {F12717} If the filename is ":memory:", then an private
** in-memory database is created for the connection. {F12718} This in-memory
** database will vanish when the database connection is closed. {END} Future
** version of SQLite might make use of additional special filenames
** that begin with the ":" character. It is recommended that
** when a database filename really does begin with
** ":" that you prefix the filename with a pathname like "./" to
** avoid ambiguity.
**
** {F12719} If the filename is an empty string, then a private temporary
** on-disk database will be created. {F12720} This private database will be
** automatically deleted as soon as the database connection is closed.
**
** {F12721} The fourth parameter to sqlite3_open_v2() is the name of the
** [sqlite3_vfs] object that defines the operating system
** interface that the new database connection should use. {F12722} If the
** fourth parameter is a NULL pointer then the default [sqlite3_vfs]
** object is used. {END}
**
** <b>Note to windows users:</b> The encoding used for the filename argument
** of [sqlite3_open()] and [sqlite3_open_v2()] must be UTF-8, not whatever
** codepage is currently defined. Filenames containing international
** characters must be converted to UTF-8 prior to passing them into
** [sqlite3_open()] or [sqlite3_open_v2()].
*/
/*IMPORT_C*/ int sqlite3_open(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
/*IMPORT_C*/ int sqlite3_open16(
const void *filename, /* Database filename (UTF-16) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
/*IMPORT_C*/ int sqlite3_open_v2(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb, /* OUT: SQLite db handle */
int flags, /* Flags */
const char *zVfs /* Name of VFS module to use */
);
/*
** CAPI3REF: Error Codes And Messages {F12800}
**
** {F12801} The sqlite3_errcode() interface returns the numeric
** [SQLITE_OK | result code] or [SQLITE_IOERR_READ | extended result code]
** for the most recent failed sqlite3_* API call associated
** with [sqlite3] handle 'db'. {U12802} If a prior API call failed but the
** most recent API call succeeded, the return value from sqlite3_errcode()
** is undefined. {END}
**
** {F12803} The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
** text that describes the error, as either UTF8 or UTF16 respectively.
** {F12804} Memory to hold the error message string is managed internally.
** {U12805} The
** string may be overwritten or deallocated by subsequent calls to SQLite
** interface functions. {END}
**
** {F12806} Calls to many sqlite3_* functions set the error code and
** string returned by [sqlite3_errcode()], [sqlite3_errmsg()], and
** [sqlite3_errmsg16()] overwriting the previous values. {F12807}
** Except, calls to [sqlite3_errcode()],
** [sqlite3_errmsg()], and [sqlite3_errmsg16()] themselves do not affect the
** results of future invocations. {F12808} Calls to API routines that
** do not return an error code (example: [sqlite3_data_count()]) do not
** change the error code returned by this routine. {F12809} Interfaces that
** are not associated with a specific database connection (examples:
** [sqlite3_mprintf()] or [sqlite3_enable_shared_cache()] do not change
** the return code. {END}
**
** {F12810} Assuming no other intervening sqlite3_* API calls are made,
** the error code returned by this function is associated with the same
** error as the strings returned by [sqlite3_errmsg()] and [sqlite3_errmsg16()].
*/
/*IMPORT_C*/ int sqlite3_errcode(sqlite3 *db);
/*IMPORT_C*/ const char *sqlite3_errmsg(sqlite3*);
/*IMPORT_C*/ const void *sqlite3_errmsg16(sqlite3*);
/*
** CAPI3REF: SQL Statement Object {F13000}
**
** An instance of this object represent single SQL statements. This
** object is variously known as a "prepared statement" or a
** "compiled SQL statement" or simply as a "statement".
**
** The life of a statement object goes something like this:
**
** <ol>
** <li> Create the object using [sqlite3_prepare_v2()] or a related
** function.
** <li> Bind values to host parameters using
** [sqlite3_bind_blob | sqlite3_bind_* interfaces].
** <li> Run the SQL by calling [sqlite3_step()] one or more times.
** <li> Reset the statement using [sqlite3_reset()] then go back
** to step 2. Do this zero or more times.
** <li> Destroy the object using [sqlite3_finalize()].
** </ol>
**
** Refer to documentation on individual methods above for additional
** information.
*/
typedef struct sqlite3_stmt sqlite3_stmt;
/*
** CAPI3REF: Compiling An SQL Statement {F13010}
**
** To execute an SQL query, it must first be compiled into a byte-code
** program using one of these routines.
**
** {F13011} The first argument "db" is an [sqlite3 | SQLite database handle]
** obtained from a prior call to [sqlite3_open()], [sqlite3_open_v2()]
** or [sqlite3_open16()]. {F13012}
** The second argument "zSql" is the statement to be compiled, encoded
** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
** interfaces uses UTF-8 and sqlite3_prepare16() and sqlite3_prepare16_v2()
** use UTF-16. {END}
**
** {F13013} If the nByte argument is less
** than zero, then zSql is read up to the first zero terminator.
** {F13014} If nByte is non-negative, then it is the maximum number of
** bytes read from zSql. When nByte is non-negative, the
** zSql string ends at either the first '\000' or '\u0000' character or
** until the nByte-th byte, whichever comes first. {END}
**
** {F13015} *pzTail is made to point to the first byte past the end of the
** first SQL statement in zSql. These routines only compiles the first
** statement in zSql, so *pzTail is left pointing to what remains
** uncompiled. {END}
**
** {F13016} *ppStmt is left pointing to a compiled
** [sqlite3_stmt | SQL statement structure] that can be
** executed using [sqlite3_step()]. Or if there is an error, *ppStmt may be
** set to NULL. {F13017} If the input text contains no SQL (if the input
** is and empty string or a comment) then *ppStmt is set to NULL.
** {U13018} The calling procedure is responsible for deleting the
** compiled SQL statement
** using [sqlite3_finalize()] after it has finished with it.
**
** {F13019} On success, [SQLITE_OK] is returned. Otherwise an
** [SQLITE_ERROR | error code] is returned. {END}
**
** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
** recommended for all new programs. The two older interfaces are retained
** for backwards compatibility, but their use is discouraged.
** {F13020} In the "v2" interfaces, the prepared statement
** that is returned (the [sqlite3_stmt] object) contains a copy of the
** original SQL text. {END} This causes the [sqlite3_step()] interface to
** behave a differently in two ways:
**
** <ol>
** <li>{F13022}
** If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
** always used to do, [sqlite3_step()] will automatically recompile the SQL
** statement and try to run it again. {F12023} If the schema has changed in
** a way that makes the statement no longer valid, [sqlite3_step()] will still
** return [SQLITE_SCHEMA]. {END} But unlike the legacy behavior,
** [SQLITE_SCHEMA] is now a fatal error. {F12024} Calling
** [sqlite3_prepare_v2()] again will not make the
** error go away. {F12025} Note: use [sqlite3_errmsg()] to find the text
** of the parsing error that results in an [SQLITE_SCHEMA] return. {END}
** </li>
**
** <li>
** {F13030} When an error occurs,
** [sqlite3_step()] will return one of the detailed
** [SQLITE_ERROR | result codes] or
** [SQLITE_IOERR_READ | extended result codes]. {F13031}
** The legacy behavior was that [sqlite3_step()] would only return a generic
** [SQLITE_ERROR] result code and you would have to make a second call to
** [sqlite3_reset()] in order to find the underlying cause of the problem.
** {F13032}
** With the "v2" prepare interfaces, the underlying reason for the error is
** returned immediately. {END}
** </li>
** </ol>
*/
/*IMPORT_C*/ int sqlite3_prepare(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
/*IMPORT_C*/ int sqlite3_prepare_v2(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
/*IMPORT_C*/ int sqlite3_prepare16(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
/*IMPORT_C*/ int sqlite3_prepare16_v2(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
/*
** CAPIREF: Retrieving Statement SQL {F13100}
**
** {F13101} If the compiled SQL statement passed as an argument was
** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()],
** then this function returns a pointer to a zero-terminated string
** containing a copy of the original SQL statement. {F13102} The
** pointer is valid until the statement
** is deleted using sqlite3_finalize().
** {F13103} The string returned by sqlite3_sql() is always UTF8 even
** if a UTF16 string was originally entered using [sqlite3_prepare16_v2()]
** or the equivalent.
**
** {F13104} If the statement was compiled using either of the legacy
** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this
** function returns NULL.
*/
/*IMPORT_C*/ const char *sqlite3_sql(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Dynamically Typed Value Object {F15000}
**
** {F15001} SQLite uses the sqlite3_value object to represent all values
** that are or can be stored in a database table. {END}
** SQLite uses dynamic typing for the values it stores.
** {F15002} Values stored in sqlite3_value objects can be
** be integers, floating point values, strings, BLOBs, or NULL.
*/
typedef struct Mem sqlite3_value;
/*
** CAPI3REF: SQL Function Context Object {F16001}
**
** The context in which an SQL function executes is stored in an
** sqlite3_context object. {F16002} A pointer to an sqlite3_context
** object is always first parameter to application-defined SQL functions.
*/
typedef struct sqlite3_context sqlite3_context;
/*
** CAPI3REF: Binding Values To Prepared Statements {F13500}
**
** {F13501} In the SQL strings input to [sqlite3_prepare_v2()] and its
** variants, literals may be replace by a parameter in one
** of these forms:
**
** <ul>
** <li> ?
** <li> ?NNN
** <li> :AAA
** <li> @AAA
** <li> $VVV
** </ul>
**
** In the parameter forms shown above NNN is an integer literal,
** AAA is an alphanumeric identifier and VVV is a variable name according
** to the syntax rules of the TCL programming language. {END}
** The values of these parameters (also called "host parameter names")
** can be set using the sqlite3_bind_*() routines defined here.
**
** {F13502} The first argument to the sqlite3_bind_*() routines always
** is a pointer to the [sqlite3_stmt] object returned from
** [sqlite3_prepare_v2()] or its variants. {F13503} The second
** argument is the index of the parameter to be set. {F13504} The
** first parameter has an index of 1. {F13505} When the same named
** parameter is used more than once, second and subsequent
** occurrences have the same index as the first occurrence.
** {F13506} The index for named parameters can be looked up using the
** [sqlite3_bind_parameter_name()] API if desired. {F13507} The index
** for "?NNN" parameters is the value of NNN.
** {F13508} The NNN value must be between 1 and the compile-time
** parameter SQLITE_MAX_VARIABLE_NUMBER (default value: 999). {END}
** See <a href="limits.html">limits.html</a> for additional information.
**
** {F13509} The third argument is the value to bind to the parameter. {END}
**
** {F13510} In those
** routines that have a fourth argument, its value is the number of bytes
** in the parameter. To be clear: the value is the number of bytes in the
** string, not the number of characters. {F13511} The number
** of bytes does not include the zero-terminator at the end of strings.
** {F13512}
** If the fourth parameter is negative, the length of the string is
** number of bytes up to the first zero terminator. {END}
**
** {F13513}
** The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
** text after SQLite has finished with it. {F13514} If the fifth argument is
** the special value [SQLITE_STATIC], then the library assumes that the
** information is in static, unmanaged space and does not need to be freed.
** {F13515} If the fifth argument has the value [SQLITE_TRANSIENT], then
** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns. {END}
**
** {F13520} The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
** is filled with zeros. {F13521} A zeroblob uses a fixed amount of memory
** (just an integer to hold it size) while it is being processed. {END}
** Zeroblobs are intended to serve as place-holders for BLOBs whose
** content is later written using
** [sqlite3_blob_open | increment BLOB I/O] routines. {F13522} A negative
** value for the zeroblob results in a zero-length BLOB. {END}
**
** {F13530} The sqlite3_bind_*() routines must be called after
** [sqlite3_prepare_v2()] (and its variants) or [sqlite3_reset()] and
** before [sqlite3_step()]. {F13531}
** Bindings are not cleared by the [sqlite3_reset()] routine.
** {F13532} Unbound parameters are interpreted as NULL. {END}
**
** {F13540} These routines return [SQLITE_OK] on success or an error code if
** anything goes wrong. {F13541} [SQLITE_RANGE] is returned if the parameter
** index is out of range. {F13542} [SQLITE_NOMEM] is returned if malloc fails.
** {F13543} [SQLITE_MISUSE] is returned if these routines are called on a
** virtual machine that is the wrong state or which has already been finalized.
*/
/*IMPORT_C*/ int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
/*IMPORT_C*/ int sqlite3_bind_double(sqlite3_stmt*, int, double);
/*IMPORT_C*/ int sqlite3_bind_int(sqlite3_stmt*, int, int);
/*IMPORT_C*/ int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
/*IMPORT_C*/ int sqlite3_bind_null(sqlite3_stmt*, int);
/*IMPORT_C*/ int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
/*IMPORT_C*/ int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
/*IMPORT_C*/ int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
/*IMPORT_C*/ int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
/*
** CAPI3REF: Number Of Host Parameters {F13600}
**
** {F13601} Return the largest host parameter index in the precompiled
** statement given as the argument. {F13602} When the host parameters
** are of the forms like ":AAA", "$VVV", "@AAA", or "?",
** then they are assigned sequential increasing numbers beginning
** with one, so the value returned is the number of parameters.
** {F13603} However
** if the same host parameter name is used multiple times, each occurrance
** is given the same number, so the value returned in that case is the number
** of unique host parameter names. {F13604} If host parameters of the
** form "?NNN" are used (where NNN is an integer) then there might be
** gaps in the numbering and the value returned by this interface is
** the index of the host parameter with the largest index value. {END}
**
** {U13605} The prepared statement must not be [sqlite3_finalize | finalized]
** prior to this routine returning. Otherwise the results are undefined
** and probably undesirable.
*/
/*IMPORT_C*/ int sqlite3_bind_parameter_count(sqlite3_stmt*);
/*
** CAPI3REF: Name Of A Host Parameter {F13620}
**
** {F13621} This routine returns a pointer to the name of the n-th
** parameter in a [sqlite3_stmt | prepared statement]. {F13622}
** Host parameters of the form ":AAA" or "@AAA" or "$VVV" have a name
** which is the string ":AAA" or "@AAA" or "$VVV".
** In other words, the initial ":" or "$" or "@"
** is included as part of the name. {F13626}
** Parameters of the form "?" or "?NNN" have no name.
**
** {F13623} The first host parameter has an index of 1, not 0.
**
** {F13624} If the value n is out of range or if the n-th parameter is
** nameless, then NULL is returned. {F13625} The returned string is
** always in the UTF-8 encoding even if the named parameter was
** originally specified as UTF-16 in [sqlite3_prepare16()] or
** [sqlite3_prepare16_v2()].
*/
/*IMPORT_C*/ const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
/*
** CAPI3REF: Index Of A Parameter With A Given Name {F13640}
**
** {F13641} This routine returns the index of a host parameter with the
** given name. {F13642} The name must match exactly. {F13643}
** If no parameter with the given name is found, return 0.
** {F13644} Parameter names must be UTF8.
*/
/*IMPORT_C*/ int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
/*
** CAPI3REF: Reset All Bindings On A Prepared Statement {F13660}
**
** {F13661} Contrary to the intuition of many, [sqlite3_reset()] does not
** reset the [sqlite3_bind_blob | bindings] on a
** [sqlite3_stmt | prepared statement]. {F13662} Use this routine to
** reset all host parameters to NULL.
*/
/*IMPORT_C*/ int sqlite3_clear_bindings(sqlite3_stmt*);
/*
** CAPI3REF: Number Of Columns In A Result Set {F13710}
**
** {F13711} Return the number of columns in the result set returned by the
** [sqlite3_stmt | compiled SQL statement]. {F13712} This routine returns 0
** if pStmt is an SQL statement that does not return data (for
** example an UPDATE).
*/
/*IMPORT_C*/ int sqlite3_column_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Column Names In A Result Set {F13720}
**
** {F13721} These routines return the name assigned to a particular column
** in the result set of a SELECT statement. {F13722} The sqlite3_column_name()
** interface returns a pointer to a zero-terminated UTF8 string
** and sqlite3_column_name16() returns a pointer to a zero-terminated
** UTF16 string. {F13723} The first parameter is the
** [sqlite3_stmt | prepared statement] that implements the SELECT statement.
** The second parameter is the column number. The left-most column is
** number 0.
**
** {F13724} The returned string pointer is valid until either the
** [sqlite3_stmt | prepared statement] is destroyed by [sqlite3_finalize()]
** or until the next call sqlite3_column_name() or sqlite3_column_name16()
** on the same column.
**
** {F13725} If sqlite3_malloc() fails during the processing of either routine
** (for example during a conversion from UTF-8 to UTF-16) then a
** NULL pointer is returned.
*/
/*IMPORT_C*/ const char *sqlite3_column_name(sqlite3_stmt*, int N);
/*IMPORT_C*/ const void *sqlite3_column_name16(sqlite3_stmt*, int N);
/*
** CAPI3REF: Source Of Data In A Query Result {F13740}
**
** {F13741} These routines provide a means to determine what column of what
** table in which database a result of a SELECT statement comes from.
** {F13742} The name of the database or table or column can be returned as
** either a UTF8 or UTF16 string. {F13743} The _database_ routines return
** the database name, the _table_ routines return the table name, and
** the origin_ routines return the column name. {F13744}
** The returned string is valid until
** the [sqlite3_stmt | prepared statement] is destroyed using
** [sqlite3_finalize()] or until the same information is requested
** again in a different encoding.
**
** {F13745} The names returned are the original un-aliased names of the
** database, table, and column.
**
** {F13746} The first argument to the following calls is a
** [sqlite3_stmt | compiled SQL statement].
** {F13747} These functions return information about the Nth column returned by
** the statement, where N is the second function argument.
**
** {F13748} If the Nth column returned by the statement is an expression
** or subquery and is not a column value, then all of these functions
** return NULL. {F13749} Otherwise, they return the
** name of the attached database, table and column that query result
** column was extracted from.
**
** {F13750} As with all other SQLite APIs, those postfixed with "16" return
** UTF-16 encoded strings, the other functions return UTF-8. {END}
**
** These APIs are only available if the library was compiled with the
** SQLITE_ENABLE_COLUMN_METADATA preprocessor symbol defined.
**
** {U13751}
** If two or more threads call one or more of these routines against the same
** prepared statement and column at the same time then the results are
** undefined.
*/
/*IMPORT_C*/ const char *sqlite3_column_database_name(sqlite3_stmt*,int);
/*IMPORT_C*/ const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
/*IMPORT_C*/ const char *sqlite3_column_table_name(sqlite3_stmt*,int);
/*IMPORT_C*/ const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
/*IMPORT_C*/ const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
/*IMPORT_C*/ const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
/*
** CAPI3REF: Declared Datatype Of A Query Result {F13760}
**
** The first parameter is a [sqlite3_stmt | compiled SQL statement].
** {F13761} If this statement is a SELECT statement and the Nth column of the
** returned result set of that SELECT is a table column (not an
** expression or subquery) then the declared type of the table
** column is returned. {F13762} If the Nth column of the result set is an
** expression or subquery, then a NULL pointer is returned.
** {F13763} The returned string is always UTF-8 encoded. {END}
** For example, in the database schema:
**
** CREATE TABLE t1(c1 VARIANT);
**
** And the following statement compiled:
**
** SELECT c1 + 1, c1 FROM t1;
**
** Then this routine would return the string "VARIANT" for the second
** result column (i==1), and a NULL pointer for the first result column
** (i==0).
**
** SQLite uses dynamic run-time typing. So just because a column
** is declared to contain a particular type does not mean that the
** data stored in that column is of the declared type. SQLite is
** strongly typed, but the typing is dynamic not static. Type
** is associated with individual values, not with the containers
** used to hold those values.
*/
/*IMPORT_C*/ const char *sqlite3_column_decltype(sqlite3_stmt *, int i);
/*IMPORT_C*/ const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
/*
** CAPI3REF: Evaluate An SQL Statement {F13200}
**
** After an [sqlite3_stmt | SQL statement] has been prepared with a call
** to either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or to one of
** the legacy interfaces [sqlite3_prepare()] or [sqlite3_prepare16()],
** then this function must be called one or more times to evaluate the
** statement.
**
** The details of the behavior of this sqlite3_step() interface depend
** on whether the statement was prepared using the newer "v2" interface
** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
** new "v2" interface is recommended for new applications but the legacy
** interface will continue to be supported.
**
** In the lagacy interface, the return value will be either [SQLITE_BUSY],
** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
** With the "v2" interface, any of the other [SQLITE_OK | result code]
** or [SQLITE_IOERR_READ | extended result code] might be returned as
** well.
**
** [SQLITE_BUSY] means that the database engine was unable to acquire the
** database locks it needs to do its job. If the statement is a COMMIT
** or occurs outside of an explicit transaction, then you can retry the
** statement. If the statement is not a COMMIT and occurs within a
** explicit transaction then you should rollback the transaction before
** continuing.
**
** [SQLITE_DONE] means that the statement has finished executing
** successfully. sqlite3_step() should not be called again on this virtual
** machine without first calling [sqlite3_reset()] to reset the virtual
** machine back to its initial state.
**
** If the SQL statement being executed returns any data, then
** [SQLITE_ROW] is returned each time a new row of data is ready
** for processing by the caller. The values may be accessed using
** the [sqlite3_column_int | column access functions].
** sqlite3_step() is called again to retrieve the next row of data.
**
** [SQLITE_ERROR] means that a run-time error (such as a constraint
** violation) has occurred. sqlite3_step() should not be called again on
** the VM. More information may be found by calling [sqlite3_errmsg()].
** With the legacy interface, a more specific error code (example:
** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
** can be obtained by calling [sqlite3_reset()] on the
** [sqlite3_stmt | prepared statement]. In the "v2" interface,
** the more specific error code is returned directly by sqlite3_step().
**
** [SQLITE_MISUSE] means that the this routine was called inappropriately.
** Perhaps it was called on a [sqlite3_stmt | prepared statement] that has
** already been [sqlite3_finalize | finalized] or on one that had
** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could
** be the case that the same database connection is being used by two or
** more threads at the same moment in time.
**
** <b>Goofy Interface Alert:</b>
** In the legacy interface,
** the sqlite3_step() API always returns a generic error code,
** [SQLITE_ERROR], following any error other than [SQLITE_BUSY]
** and [SQLITE_MISUSE]. You must call [sqlite3_reset()] or
** [sqlite3_finalize()] in order to find one of the specific
** [SQLITE_ERROR | result codes] that better describes the error.
** We admit that this is a goofy design. The problem has been fixed
** with the "v2" interface. If you prepare all of your SQL statements
** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()], then the
** more specific [SQLITE_ERROR | result codes] are returned directly
** by sqlite3_step(). The use of the "v2" interface is recommended.
*/
/*IMPORT_C*/ int sqlite3_step(sqlite3_stmt*);
/*
** CAPI3REF: Number of columns in a result set {F13770}
**
** Return the number of values in the current row of the result set.
**
** {F13771} After a call to [sqlite3_step()] that returns [SQLITE_ROW],
** this routine
** will return the same value as the [sqlite3_column_count()] function.
** {F13772}
** After [sqlite3_step()] has returned an [SQLITE_DONE], [SQLITE_BUSY], or
** a [SQLITE_ERROR | error code], or before [sqlite3_step()] has been
** called on the [sqlite3_stmt | prepared statement] for the first time,
** this routine returns zero.
*/
/*IMPORT_C*/ int sqlite3_data_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Fundamental Datatypes {F10265}
**
** {F10266}Every value in SQLite has one of five fundamental datatypes:
**
** <ul>
** <li> 64-bit signed integer
** <li> 64-bit IEEE floating point number
** <li> string
** <li> BLOB
** <li> NULL
** </ul> {END}
**
** These constants are codes for each of those types.
**
** Note that the SQLITE_TEXT constant was also used in SQLite version 2
** for a completely different meaning. Software that links against both
** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT not
** SQLITE_TEXT.
*/
#define SQLITE_INTEGER 1
#define SQLITE_FLOAT 2
#define SQLITE_BLOB 4
#define SQLITE_NULL 5
#ifdef SQLITE_TEXT
# undef SQLITE_TEXT
#else
# define SQLITE_TEXT 3
#endif
#define SQLITE3_TEXT 3
/*
** CAPI3REF: Results Values From A Query {F13800}
**
** These routines return information about
** a single column of the current result row of a query. In every
** case the first argument is a pointer to the
** [sqlite3_stmt | SQL statement] that is being
** evaluated (the [sqlite3_stmt*] that was returned from
** [sqlite3_prepare_v2()] or one of its variants) and
** the second argument is the index of the column for which information
** should be returned. The left-most column of the result set
** has an index of 0.
**
** If the SQL statement is not currently point to a valid row, or if the
** the column index is out of range, the result is undefined.
** These routines may only be called when the most recent call to
** [sqlite3_step()] has returned [SQLITE_ROW] and neither
** [sqlite3_reset()] nor [sqlite3_finalize()] has been call subsequently.
** If any of these routines are called after [sqlite3_reset()] or
** [sqlite3_finalize()] or after [sqlite3_step()] has returned
** something other than [SQLITE_ROW], the results are undefined.
** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()]
** are called from a different thread while any of these routines
** are pending, then the results are undefined.
**
** The sqlite3_column_type() routine returns
** [SQLITE_INTEGER | datatype code] for the initial data type
** of the result column. The returned value is one of [SQLITE_INTEGER],
** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
** returned by sqlite3_column_type() is only meaningful if no type
** conversions have occurred as described below. After a type conversion,
** the value returned by sqlite3_column_type() is undefined. Future
** versions of SQLite may change the behavior of sqlite3_column_type()
** following a type conversion.
**
** If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
** routine returns the number of bytes in that BLOB or string.
** If the result is a UTF-16 string, then sqlite3_column_bytes() converts
** the string to UTF-8 and then returns the number of bytes.
** If the result is a numeric value then sqlite3_column_bytes() uses
** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
** the number of bytes in that string.
** The value returned does not include the zero terminator at the end
** of the string. For clarity: the value returned is the number of
** bytes in the string, not the number of characters.
**
** Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
** even zero-length strings, are always zero terminated. The return
** value from sqlite3_column_blob() for a zero-length blob is an arbitrary
** pointer, possibly even a NULL pointer.
**
** The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes()
** but leaves the result in UTF-16 instead of UTF-8.
** The zero terminator is not included in this count.
**
** These routines attempt to convert the value where appropriate. For
** example, if the internal representation is FLOAT and a text result
** is requested, [sqlite3_snprintf()] is used internally to do the conversion
** automatically. The following table details the conversions that
** are applied:
**
** <blockquote>
** <table border="1">
** <tr><th> Internal<br>Type <th> Requested<br>Type <th> Conversion
**
** <tr><td> NULL <td> INTEGER <td> Result is 0
** <tr><td> NULL <td> FLOAT <td> Result is 0.0
** <tr><td> NULL <td> TEXT <td> Result is NULL pointer
** <tr><td> NULL <td> BLOB <td> Result is NULL pointer
** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float
** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer
** <tr><td> INTEGER <td> BLOB <td> Same as for INTEGER->TEXT
** <tr><td> FLOAT <td> INTEGER <td> Convert from float to integer
** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float
** <tr><td> FLOAT <td> BLOB <td> Same as FLOAT->TEXT
** <tr><td> TEXT <td> INTEGER <td> Use atoi()
** <tr><td> TEXT <td> FLOAT <td> Use atof()
** <tr><td> TEXT <td> BLOB <td> No change
** <tr><td> BLOB <td> INTEGER <td> Convert to TEXT then use atoi()
** <tr><td> BLOB <td> FLOAT <td> Convert to TEXT then use atof()
** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
** </table>
** </blockquote>
**
** The table above makes reference to standard C library functions atoi()
** and atof(). SQLite does not really use these functions. It has its
** on equavalent internal routines. The atoi() and atof() names are
** used in the table for brevity and because they are familiar to most
** C programmers.
**
** Note that when type conversions occur, pointers returned by prior
** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
** sqlite3_column_text16() may be invalidated.
** Type conversions and pointer invalidations might occur
** in the following cases:
**
** <ul>
** <li><p> The initial content is a BLOB and sqlite3_column_text()
** or sqlite3_column_text16() is called. A zero-terminator might
** need to be added to the string.</p></li>
**
** <li><p> The initial content is UTF-8 text and sqlite3_column_bytes16() or
** sqlite3_column_text16() is called. The content must be converted
** to UTF-16.</p></li>
**
** <li><p> The initial content is UTF-16 text and sqlite3_column_bytes() or
** sqlite3_column_text() is called. The content must be converted
** to UTF-8.</p></li>
** </ul>
**
** Conversions between UTF-16be and UTF-16le are always done in place and do
** not invalidate a prior pointer, though of course the content of the buffer
** that the prior pointer points to will have been modified. Other kinds
** of conversion are done in place when it is possible, but sometime it is
** not possible and in those cases prior pointers are invalidated.
**
** The safest and easiest to remember policy is to invoke these routines
** in one of the following ways:
**
** <ul>
** <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li>
** <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li>
** <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li>
** </ul>
**
** In other words, you should call sqlite3_column_text(), sqlite3_column_blob(),
** or sqlite3_column_text16() first to force the result into the desired
** format, then invoke sqlite3_column_bytes() or sqlite3_column_bytes16() to
** find the size of the result. Do not mix call to sqlite3_column_text() or
** sqlite3_column_blob() with calls to sqlite3_column_bytes16(). And do not
** mix calls to sqlite3_column_text16() with calls to sqlite3_column_bytes().
**
** The pointers returned are valid until a type conversion occurs as
** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
** [sqlite3_finalize()] is called. The memory space used to hold strings
** and blobs is freed automatically. Do <b>not</b> pass the pointers returned
** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].
**
** If a memory allocation error occurs during the evaluation of any
** of these routines, a default value is returned. The default value
** is either the integer 0, the floating point number 0.0, or a NULL
** pointer. Subsequent calls to [sqlite3_errcode()] will return
** [SQLITE_NOMEM].
*/
/*IMPORT_C*/ const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ double sqlite3_column_double(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ int sqlite3_column_int(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ int sqlite3_column_type(sqlite3_stmt*, int iCol);
/*IMPORT_C*/ sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
/*
** CAPI3REF: Destroy A Prepared Statement Object {F13300}
**
** The sqlite3_finalize() function is called to delete a
** [sqlite3_stmt | compiled SQL statement]. If the statement was
** executed successfully, or not executed at all, then SQLITE_OK is returned.
** If execution of the statement failed then an
** [SQLITE_ERROR | error code] or [SQLITE_IOERR_READ | extended error code]
** is returned.
**
** This routine can be called at any point during the execution of the
** [sqlite3_stmt | virtual machine]. If the virtual machine has not
** completed execution when this routine is called, that is like
** encountering an error or an interrupt. (See [sqlite3_interrupt()].)
** Incomplete updates may be rolled back and transactions cancelled,
** depending on the circumstances, and the
** [SQLITE_ERROR | result code] returned will be [SQLITE_ABORT].
*/
/*IMPORT_C*/ int sqlite3_finalize(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Reset A Prepared Statement Object {F13330}
**
** The sqlite3_reset() function is called to reset a
** [sqlite3_stmt | compiled SQL statement] object.
** back to its initial state, ready to be re-executed.
** Any SQL statement variables that had values bound to them using
** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
** Use [sqlite3_clear_bindings()] to reset the bindings.
*/
/*IMPORT_C*/ int sqlite3_reset(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Create Or Redefine SQL Functions {F16100}
**
** The following two functions are used to add SQL functions or aggregates
** or to redefine the behavior of existing SQL functions or aggregates. The
** difference only between the two is that the second parameter, the
** name of the (scalar) function or aggregate, is encoded in UTF-8 for
** sqlite3_create_function() and UTF-16 for sqlite3_create_function16().
**
** The first argument is the [sqlite3 | database handle] that holds the
** SQL function or aggregate is to be added or redefined. If a single
** program uses more than one database handle internally, then SQL
** functions or aggregates must be added individually to each database
** handle with which they will be used.
**
** The second parameter is the name of the SQL function to be created
** or redefined.
** The length of the name is limited to 255 bytes, exclusive of the
** zero-terminator. Note that the name length limit is in bytes, not
** characters. Any attempt to create a function with a longer name
** will result in an SQLITE_ERROR error.
**
** The third parameter is the number of arguments that the SQL function or
** aggregate takes. If this parameter is negative, then the SQL function or
** aggregate may take any number of arguments.
**
** The fourth parameter, eTextRep, specifies what
** [SQLITE_UTF8 | text encoding] this SQL function prefers for
** its parameters. Any SQL function implementation should be able to work
** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be
** more efficient with one encoding than another. It is allowed to
** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
** times with the same function but with different values of eTextRep.
** When multiple implementations of the same function are available, SQLite
** will pick the one that involves the least amount of data conversion.
** If there is only a single implementation which does not care what
** text encoding is used, then the fourth argument should be
** [SQLITE_ANY].
**
** The fifth parameter is an arbitrary pointer. The implementation
** of the function can gain access to this pointer using
** [sqlite3_user_data()].
**
** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
** pointers to C-language functions that implement the SQL
** function or aggregate. A scalar SQL function requires an implementation of
** the xFunc callback only, NULL pointers should be passed as the xStep
** and xFinal parameters. An aggregate SQL function requires an implementation
** of xStep and xFinal and NULL should be passed for xFunc. To delete an
** existing SQL function or aggregate, pass NULL for all three function
** callback.
**
** It is permitted to register multiple implementations of the same
** functions with the same name but with either differing numbers of
** arguments or differing perferred text encodings. SQLite will use
** the implementation most closely matches the way in which the
** SQL function is used.
*/
/*IMPORT_C*/ int sqlite3_create_function(
sqlite3 *,
const char *zFunctionName,
int nArg,
int eTextRep,
void*,
void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
/*IMPORT_C*/ int sqlite3_create_function16(
sqlite3*,
const void *zFunctionName,
int nArg,
int eTextRep,
void*,
void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
/*
** CAPI3REF: Text Encodings {F10267}
**
** These constant define integer codes that represent the various
** text encodings supported by SQLite.
*/
#define SQLITE_UTF8 1
#define SQLITE_UTF16LE 2
#define SQLITE_UTF16BE 3
#define SQLITE_UTF16 4 /* Use native byte order */
#define SQLITE_ANY 5 /* sqlite3_create_function only */
#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */
/*
** CAPI3REF: Obsolete Functions
**
** These functions are all now obsolete. In order to maintain
** backwards compatibility with older code, we continue to support
** these functions. However, new development projects should avoid
** the use of these functions. To help encourage people to avoid
** using these functions, we are not going to tell you want they do.
*/
/*IMPORT_C*/ int sqlite3_aggregate_count(sqlite3_context*);
/*IMPORT_C*/ int sqlite3_expired(sqlite3_stmt*);
/*IMPORT_C*/ int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
/*IMPORT_C*/ int sqlite3_global_recover(void);
/*IMPORT_C*/ void sqlite3_thread_cleanup(void);
/*IMPORT_C*/ int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64);
/*
** CAPI3REF: Obtaining SQL Function Parameter Values {F15100}
**
** The C-language implementation of SQL functions and aggregates uses
** this set of interface routines to access the parameter values on
** the function or aggregate.
**
** The xFunc (for scalar functions) or xStep (for aggregates) parameters
** to [sqlite3_create_function()] and [sqlite3_create_function16()]
** define callbacks that implement the SQL functions and aggregates.
** The 4th parameter to these callbacks is an array of pointers to
** [sqlite3_value] objects. There is one [sqlite3_value] object for
** each parameter to the SQL function. These routines are used to
** extract values from the [sqlite3_value] objects.
**
** These routines work just like the corresponding
** [sqlite3_column_blob | sqlite3_column_* routines] except that
** these routines take a single [sqlite3_value*] pointer instead
** of an [sqlite3_stmt*] pointer and an integer column number.
**
** The sqlite3_value_text16() interface extracts a UTF16 string
** in the native byte-order of the host machine. The
** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
** extract UTF16 strings as big-endian and little-endian respectively.
**
** The sqlite3_value_numeric_type() interface attempts to apply
** numeric affinity to the value. This means that an attempt is
** made to convert the value to an integer or floating point. If
** such a conversion is possible without loss of information (in other
** words if the value is a string that looks like a number)
** then the conversion is done. Otherwise no conversion occurs. The
** [SQLITE_INTEGER | datatype] after conversion is returned.
**
** Please pay particular attention to the fact that the pointer that
** is returned from [sqlite3_value_blob()], [sqlite3_value_text()], or
** [sqlite3_value_text16()] can be invalidated by a subsequent call to
** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
** or [sqlite3_value_text16()].
**
** These routines must be called from the same thread as
** the SQL function that supplied the sqlite3_value* parameters.
** Or, if the sqlite3_value* argument comes from the [sqlite3_column_value()]
** interface, then these routines should be called from the same thread
** that ran [sqlite3_column_value()].
**
*/
/*IMPORT_C*/ const void *sqlite3_value_blob(sqlite3_value*);
/*IMPORT_C*/ int sqlite3_value_bytes(sqlite3_value*);
/*IMPORT_C*/ int sqlite3_value_bytes16(sqlite3_value*);
/*IMPORT_C*/ double sqlite3_value_double(sqlite3_value*);
/*IMPORT_C*/ int sqlite3_value_int(sqlite3_value*);
/*IMPORT_C*/ sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
/*IMPORT_C*/ const unsigned char *sqlite3_value_text(sqlite3_value*);
/*IMPORT_C*/ const void *sqlite3_value_text16(sqlite3_value*);
/*IMPORT_C*/ const void *sqlite3_value_text16le(sqlite3_value*);
/*IMPORT_C*/ const void *sqlite3_value_text16be(sqlite3_value*);
/*IMPORT_C*/ int sqlite3_value_type(sqlite3_value*);
/*IMPORT_C*/ int sqlite3_value_numeric_type(sqlite3_value*);
/*
** CAPI3REF: Obtain Aggregate Function Context {F16210}
**
** The implementation of aggregate SQL functions use this routine to allocate
** a structure for storing their state.
** {F16211} The first time the sqlite3_aggregate_context() routine is
** is called for a particular aggregate, SQLite allocates nBytes of memory
** zeros that memory, and returns a pointer to it.
** {F16212} On second and subsequent calls to sqlite3_aggregate_context()
** for the same aggregate function index, the same buffer is returned. {END}
** The implementation
** of the aggregate can use the returned buffer to accumulate data.
**
** {F16213} SQLite automatically frees the allocated buffer when the aggregate
** query concludes. {END}
**
** The first parameter should be a copy of the
** [sqlite3_context | SQL function context] that is the first
** parameter to the callback routine that implements the aggregate
** function.
**
** This routine must be called from the same thread in which
** the aggregate SQL function is running.
*/
/*IMPORT_C*/ void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
/*
** CAPI3REF: User Data For Functions {F16240}
**
** {F16241} The sqlite3_user_data() interface returns a copy of
** the pointer that was the pUserData parameter (the 5th parameter)
** of the the [sqlite3_create_function()]
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function. {END}
**
** {U16243} This routine must be called from the same thread in which
** the application-defined function is running.
*/
/*IMPORT_C*/ void *sqlite3_user_data(sqlite3_context*);
/*
** CAPI3REF: Function Auxiliary Data {F16270}
**
** The following two functions may be used by scalar SQL functions to
** associate meta-data with argument values. If the same value is passed to
** multiple invocations of the same SQL function during query execution, under
** some circumstances the associated meta-data may be preserved. This may
** be used, for example, to add a regular-expression matching scalar
** function. The compiled version of the regular expression is stored as
** meta-data associated with the SQL value passed as the regular expression
** pattern. The compiled regular expression can be reused on multiple
** invocations of the same function so that the original pattern string
** does not need to be recompiled on each invocation.
**
** {F16271}
** The sqlite3_get_auxdata() interface returns a pointer to the meta-data
** associated by the sqlite3_set_auxdata() function with the Nth argument
** value to the application-defined function.
** {F16272} If no meta-data has been ever been set for the Nth
** argument of the function, or if the cooresponding function parameter
** has changed since the meta-data was set, then sqlite3_get_auxdata()
** returns a NULL pointer.
**
** {F16275} The sqlite3_set_auxdata() interface saves the meta-data
** pointed to by its 3rd parameter as the meta-data for the N-th
** argument of the application-defined function. {END} Subsequent
** calls to sqlite3_get_auxdata() might return this data, if it has
** not been destroyed.
** {F16277} If it is not NULL, SQLite will invoke the destructor
** function given by the 4th parameter to sqlite3_set_auxdata() on
** the meta-data when the corresponding function parameter changes
** or when the SQL statement completes, whichever comes first. {END}
**
** In practice, meta-data is preserved between function calls for
** expressions that are constant at compile time. This includes literal
** values and SQL variables.
**
** These routines must be called from the same thread in which
** the SQL function is running.
*/
/*IMPORT_C*/ void *sqlite3_get_auxdata(sqlite3_context*, int N);
/*IMPORT_C*/ void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
/*
** CAPI3REF: Constants Defining Special Destructor Behavior {F10280}
**
** These are special value for the destructor that is passed in as the
** final argument to routines like [sqlite3_result_blob()]. If the destructor
** argument is SQLITE_STATIC, it means that the content pointer is constant
** and will never change. It does not need to be destroyed. The
** SQLITE_TRANSIENT value means that the content will likely change in
** the near future and that SQLite should make its own private copy of
** the content before returning.
**
** The typedef is necessary to work around problems in certain
** C++ compilers. See ticket #2191.
*/
typedef void (*sqlite3_destructor_type)(void*);
#define SQLITE_STATIC ((sqlite3_destructor_type)0)
#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1)
/*
** CAPI3REF: Setting The Result Of An SQL Function {F16400}
**
** These routines are used by the xFunc or xFinal callbacks that
** implement SQL functions and aggregates. See
** [sqlite3_create_function()] and [sqlite3_create_function16()]
** for additional information.
**
** These functions work very much like the
** [sqlite3_bind_blob | sqlite3_bind_*] family of functions used
** to bind values to host parameters in prepared statements.
** Refer to the
** [sqlite3_bind_blob | sqlite3_bind_* documentation] for
** additional information.
**
** {F16402} The sqlite3_result_blob() interface sets the result from
** an application defined function to be the BLOB whose content is pointed
** to by the second parameter and which is N bytes long where N is the
** third parameter.
** {F16403} The sqlite3_result_zeroblob() inerfaces set the result of
** the application defined function to be a BLOB containing all zero
** bytes and N bytes in size, where N is the value of the 2nd parameter.
**
** {F16407} The sqlite3_result_double() interface sets the result from
** an application defined function to be a floating point value specified
** by its 2nd argument.
**
** {F16409} The sqlite3_result_error() and sqlite3_result_error16() functions
** cause the implemented SQL function to throw an exception.
** {F16411} SQLite uses the string pointed to by the
** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
** as the text of an error message. {F16412} SQLite interprets the error
** message string from sqlite3_result_error() as UTF8. {F16413} SQLite
** interprets the string from sqlite3_result_error16() as UTF16 in native
** byte order. {F16414} If the third parameter to sqlite3_result_error()
** or sqlite3_result_error16() is negative then SQLite takes as the error
** message all text up through the first zero character.
** {F16415} If the third parameter to sqlite3_result_error() or
** sqlite3_result_error16() is non-negative then SQLite takes that many
** bytes (not characters) from the 2nd parameter as the error message.
** {F16417} The sqlite3_result_error() and sqlite3_result_error16()
** routines make a copy private copy of the error message text before
** they return. {END} Hence, the calling function can deallocate or
** modify the text after they return without harm.
**
** {F16421} The sqlite3_result_toobig() interface causes SQLite
** to throw an error indicating that a string or BLOB is to long
** to represent. {F16422} The sqlite3_result_nomem() interface
** causes SQLite to throw an exception indicating that the a
** memory allocation failed.
**
** {F16431} The sqlite3_result_int() interface sets the return value
** of the application-defined function to be the 32-bit signed integer
** value given in the 2nd argument.
** {F16432} The sqlite3_result_int64() interface sets the return value
** of the application-defined function to be the 64-bit signed integer
** value given in the 2nd argument.
**
** {F16437} The sqlite3_result_null() interface sets the return value
** of the application-defined function to be NULL.
**
** {F16441} The sqlite3_result_text(), sqlite3_result_text16(),
** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
** set the return value of the application-defined function to be
** a text string which is represented as UTF-8, UTF-16 native byte order,
** UTF-16 little endian, or UTF-16 big endian, respectively.
** {F16442} SQLite takes the text result from the application from
** the 2nd parameter of the sqlite3_result_text* interfaces.
** {F16444} If the 3rd parameter to the sqlite3_result_text* interfaces
** is negative, then SQLite takes result text from the 2nd parameter
** through the first zero character.
** {F16447} If the 3rd parameter to the sqlite3_result_text* interfaces
** is non-negative, then as many bytes (not characters) of the text
** pointed to by the 2nd parameter are taken as the application-defined
** function result.
** {F16451} If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
** function as the destructor on the text or blob result when it has
** finished using that result.
** {F16453} If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is the special constant SQLITE_STATIC, then
** SQLite assumes that the text or blob result is constant space and
** does not copy the space or call a destructor when it has
** finished using that result.
** {F16454} If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
** then SQLite makes a copy of the result into space obtained from
** from [sqlite3_malloc()] before it returns.
**
** {F16461} The sqlite3_result_value() interface sets the result of
** the application-defined function to be a copy the [sqlite3_value]
** object specified by the 2nd parameter. {F16463} The
** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
** so that [sqlite3_value] specified in the parameter may change or
** be deallocated after sqlite3_result_value() returns without harm.
**
** {U16491} These routines are called from within the different thread
** than the one containing the application-defined function that recieved
** the [sqlite3_context] pointer, the results are undefined.
*/
/*IMPORT_C*/ void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
/*IMPORT_C*/ void sqlite3_result_double(sqlite3_context*, double);
/*IMPORT_C*/ void sqlite3_result_error(sqlite3_context*, const char*, int);
/*IMPORT_C*/ void sqlite3_result_error16(sqlite3_context*, const void*, int);
/*IMPORT_C*/ void sqlite3_result_error_toobig(sqlite3_context*);
/*IMPORT_C*/ void sqlite3_result_error_nomem(sqlite3_context*);
/*IMPORT_C*/ void sqlite3_result_int(sqlite3_context*, int);
/*IMPORT_C*/ void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
/*IMPORT_C*/ void sqlite3_result_null(sqlite3_context*);
/*IMPORT_C*/ void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
/*IMPORT_C*/ void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
/*IMPORT_C*/ void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
/*IMPORT_C*/ void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
/*IMPORT_C*/ void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
/*IMPORT_C*/ void sqlite3_result_zeroblob(sqlite3_context*, int n);
/*
** CAPI3REF: Define New Collating Sequences {F16600}
**
** {F16601}
** These functions are used to add new collation sequences to the
** [sqlite3*] handle specified as the first argument.
**
** {F16602}
** The name of the new collation sequence is specified as a UTF-8 string
** for sqlite3_create_collation() and sqlite3_create_collation_v2()
** and a UTF-16 string for sqlite3_create_collation16(). {F16603} In all cases
** the name is passed as the second function argument.
**
** {F16604}
** The third argument may be one of the constants [SQLITE_UTF8],
** [SQLITE_UTF16LE] or [SQLITE_UTF16BE], indicating that the user-supplied
** routine expects to be passed pointers to strings encoded using UTF-8,
** UTF-16 little-endian or UTF-16 big-endian respectively. {F16605} The
** third argument might also be [SQLITE_UTF16_ALIGNED] to indicate that
** the routine expects pointers to 16-bit word aligned strings
** of UTF16 in the native byte order of the host computer.
**
** {F16607}
** A pointer to the user supplied routine must be passed as the fifth
** argument. {F16609} If it is NULL, this is the same as deleting the collation
** sequence (so that SQLite cannot call it anymore).
** {F16611} Each time the application
** supplied function is invoked, it is passed a copy of the void* passed as
** the fourth argument to sqlite3_create_collation() or
** sqlite3_create_collation16() as its first parameter.
**
** {F16612}
** The remaining arguments to the application-supplied routine are two strings,
** each represented by a [length, data] pair and encoded in the encoding
** that was passed as the third argument when the collation sequence was
** registered. {END} The application defined collation routine should
** return negative, zero or positive if
** the first string is less than, equal to, or greater than the second
** string. i.e. (STRING1 - STRING2).
**
** {F16615}
** The sqlite3_create_collation_v2() works like sqlite3_create_collation()
** excapt that it takes an extra argument which is a destructor for
** the collation. {F16617} The destructor is called when the collation is
** destroyed and is passed a copy of the fourth parameter void* pointer
** of the sqlite3_create_collation_v2().
** {F16618} Collations are destroyed when
** they are overridden by later calls to the collation creation functions
** or when the [sqlite3*] database handle is closed using [sqlite3_close()].
*/
/*IMPORT_C*/ int sqlite3_create_collation(
sqlite3*,
const char *zName,
int eTextRep,
void*,
int(*xCompare)(void*,int,const void*,int,const void*)
);
/*IMPORT_C*/ int sqlite3_create_collation_v2(
sqlite3*,
const char *zName,
int eTextRep,
void*,
int(*xCompare)(void*,int,const void*,int,const void*),
void(*xDestroy)(void*)
);
/*IMPORT_C*/ int sqlite3_create_collation16(
sqlite3*,
const char *zName,
int eTextRep,
void*,
int(*xCompare)(void*,int,const void*,int,const void*)
);
/*
** CAPI3REF: Collation Needed Callbacks {F16700}
**
** {F16701}
** To avoid having to register all collation sequences before a database
** can be used, a single callback function may be registered with the
** database handle to be called whenever an undefined collation sequence is
** required.
**
** {F16702}
** If the function is registered using the sqlite3_collation_needed() API,
** then it is passed the names of undefined collation sequences as strings
** encoded in UTF-8. {F16703} If sqlite3_collation_needed16() is used, the names
** are passed as UTF-16 in machine native byte order. {F16704} A call to either
** function replaces any existing callback.
**
** {F16705} When the callback is invoked, the first argument passed is a copy
** of the second argument to sqlite3_collation_needed() or
** sqlite3_collation_needed16(). {F16706} The second argument is the database
** handle. {F16707} The third argument is one of [SQLITE_UTF8],
** [SQLITE_UTF16BE], or [SQLITE_UTF16LE], indicating the most
** desirable form of the collation sequence function required.
** {F16708} The fourth parameter is the name of the
** required collation sequence. {END}
**
** The callback function should register the desired collation using
** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
** [sqlite3_create_collation_v2()].
*/
/*IMPORT_C*/ int sqlite3_collation_needed(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const char*)
);
/*IMPORT_C*/ int sqlite3_collation_needed16(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const void*)
);
/*
** Specify the key for an encrypted database. This routine should be
** called right after sqlite3_open().
**
** The code to implement this API is not available in the public release
** of SQLite.
*/
/*IMPORT_C*/ int sqlite3_key(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The key */
);
/*
** Change the key on an open database. If the current database is not
** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the
** database is decrypted.
**
** The code to implement this API is not available in the public release
** of SQLite.
*/
/*IMPORT_C*/ int sqlite3_rekey(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The new key */
);
/*
** CAPI3REF: Suspend Execution For A Short Time {F10530}
**
** {F10531} The sqlite3_sleep() function
** causes the current thread to suspend execution
** for at least a number of milliseconds specified in its parameter.
**
** {F10532} If the operating system does not support sleep requests with
** millisecond time resolution, then the time will be rounded up to
** the nearest second. {F10533} The number of milliseconds of sleep actually
** requested from the operating system is returned.
**
** {F10534} SQLite implements this interface by calling the xSleep()
** method of the default [sqlite3_vfs] object. {END}
*/
/*IMPORT_C*/ int sqlite3_sleep(int);
/*
** CAPI3REF: Name Of The Folder Holding Temporary Files {F10310}
**
** If this global variable is made to point to a string which is
** the name of a folder (a.ka. directory), then all temporary files
** created by SQLite will be placed in that directory. If this variable
** is NULL pointer, then SQLite does a search for an appropriate temporary
** file directory.
**
** It is not safe to modify this variable once a database connection
** has been opened. It is intended that this variable be set once
** as part of process initialization and before any SQLite interface
** routines have been call and remain unchanged thereafter.
*/
SQLITE_EXTERN char *sqlite3_temp_directory;
/*
** CAPI3REF: Test To See If The Database Is In Auto-Commit Mode {F12930}
**
** {F12931} The sqlite3_get_autocommit() interfaces returns non-zero or
** zero if the given database connection is or is not in autocommit mode,
** respectively. {F12932} Autocommit mode is on
** by default. {F12933} Autocommit mode is disabled by a BEGIN statement.
** {F12934} Autocommit mode is reenabled by a COMMIT or ROLLBACK. {END}
**
** If certain kinds of errors occur on a statement within a multi-statement
** transactions (errors including [SQLITE_FULL], [SQLITE_IOERR],
** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
** transaction might be rolled back automatically. {F12935} The only way to
** find out if SQLite automatically rolled back the transaction after
** an error is to use this function. {END}
**
** {U12936} If another thread changes the autocommit status of the database
** connection while this routine is running, then the return value
** is undefined. {END}
*/
/*IMPORT_C*/ int sqlite3_get_autocommit(sqlite3*);
/*
** CAPI3REF: Find The Database Handle Of A Prepared Statement {F13120}
**
** {F13121} The sqlite3_db_handle interface
** returns the [sqlite3*] database handle to which a
** [sqlite3_stmt | prepared statement] belongs.
** {F13122} the database handle returned by sqlite3_db_handle
** is the same database handle that was
** the first argument to the [sqlite3_prepare_v2()] or its variants
** that was used to create the statement in the first place.
*/
/*IMPORT_C*/ sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
/*
** CAPI3REF: Commit And Rollback Notification Callbacks {F12950}
**
** {F12951} The sqlite3_commit_hook() interface registers a callback
** function to be invoked whenever a transaction is committed.
** {F12952} Any callback set by a previous call to sqlite3_commit_hook()
** for the same database connection is overridden.
** {F12953} The sqlite3_rollback_hook() interface registers a callback
** function to be invoked whenever a transaction is committed.
** {F12954} Any callback set by a previous call to sqlite3_commit_hook()
** for the same database connection is overridden.
** {F12956} The pArg argument is passed through
** to the callback. {F12957} If the callback on a commit hook function
** returns non-zero, then the commit is converted into a rollback.
**
** {F12958} If another function was previously registered, its
** pArg value is returned. Otherwise NULL is returned.
**
** {F12959} Registering a NULL function disables the callback.
**
** {F12961} For the purposes of this API, a transaction is said to have been
** rolled back if an explicit "ROLLBACK" statement is executed, or
** an error or constraint causes an implicit rollback to occur.
** {F12962} The rollback callback is not invoked if a transaction is
** automatically rolled back because the database connection is closed.
** {F12964} The rollback callback is not invoked if a transaction is
** rolled back because a commit callback returned non-zero.
** <todo> Check on this </todo> {END}
**
** These are experimental interfaces and are subject to change.
*/
/*IMPORT_C*/ void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
/*IMPORT_C*/ void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
/*
** CAPI3REF: Data Change Notification Callbacks {F12970}
**
** {F12971} The sqlite3_update_hook() interface
** registers a callback function with the database connection identified by the
** first argument to be invoked whenever a row is updated, inserted or deleted.
** {F12972} Any callback set by a previous call to this function for the same
** database connection is overridden.
**
** {F12974} The second argument is a pointer to the function to invoke when a
** row is updated, inserted or deleted.
** {F12976} The first argument to the callback is
** a copy of the third argument to sqlite3_update_hook().
** {F12977} The second callback
** argument is one of [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE],
** depending on the operation that caused the callback to be invoked.
** {F12978} The third and
** fourth arguments to the callback contain pointers to the database and
** table name containing the affected row.
** {F12979} The final callback parameter is
** the rowid of the row.
** {F12981} In the case of an update, this is the rowid after
** the update takes place.
**
** {F12983} The update hook is not invoked when internal system tables are
** modified (i.e. sqlite_master and sqlite_sequence).
**
** {F12984} If another function was previously registered, its pArg value
** is returned. {F12985} Otherwise NULL is returned.
*/
/*IMPORT_C*/ void *sqlite3_update_hook(
sqlite3*,
void(*)(void *,int ,char const *,char const *,sqlite3_int64),
void*
);
/*
** CAPI3REF: Enable Or Disable Shared Pager Cache {F10330}
**
** {F10331}
** This routine enables or disables the sharing of the database cache
** and schema data structures between connections to the same database.
** {F10332}
** Sharing is enabled if the argument is true and disabled if the argument
** is false.
**
** {F10333} Cache sharing is enabled and disabled
** for an entire process. {END} This is a change as of SQLite version 3.5.0.
** In prior versions of SQLite, sharing was
** enabled or disabled for each thread separately.
**
** {F10334}
** The cache sharing mode set by this interface effects all subsequent
** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
** {F10335} Existing database connections continue use the sharing mode
** that was in effect at the time they were opened. {END}
**
** Virtual tables cannot be used with a shared cache. {F10336} When shared
** cache is enabled, the [sqlite3_create_module()] API used to register
** virtual tables will always return an error. {END}
**
** {F10337} This routine returns [SQLITE_OK] if shared cache was
** enabled or disabled successfully. {F10338} An [SQLITE_ERROR | error code]
** is returned otherwise. {END}
**
** {F10339} Shared cache is disabled by default. {END} But this might change in
** future releases of SQLite. Applications that care about shared
** cache setting should set it explicitly.
*/
/*IMPORT_C*/ int sqlite3_enable_shared_cache(int);
/*
** CAPI3REF: Attempt To Free Heap Memory {F17340}
**
** {F17341} The sqlite3_release_memory() interface attempts to
** free N bytes of heap memory by deallocating non-essential memory
** allocations held by the database labrary. {END} Memory used
** to cache database pages to improve performance is an example of
** non-essential memory. {F16342} sqlite3_release_memory() returns
** the number of bytes actually freed, which might be more or less
** than the amount requested.
*/
/*IMPORT_C*/ int sqlite3_release_memory(int);
/*
** CAPI3REF: Impose A Limit On Heap Size {F17350}
**
** {F16351} The sqlite3_soft_heap_limit() interface
** places a "soft" limit on the amount of heap memory that may be allocated
** by SQLite. {F16352} If an internal allocation is requested
** that would exceed the soft heap limit, [sqlite3_release_memory()] is
** invoked one or more times to free up some space before the allocation
** is made. {END}
**
** {F16353} The limit is called "soft", because if
** [sqlite3_release_memory()] cannot
** free sufficient memory to prevent the limit from being exceeded,
** the memory is allocated anyway and the current operation proceeds.
**
** {F16354}
** A negative or zero value for N means that there is no soft heap limit and
** [sqlite3_release_memory()] will only be called when memory is exhausted.
** {F16355} The default value for the soft heap limit is zero.
**
** SQLite makes a best effort to honor the soft heap limit.
** {F16356} But if the soft heap limit cannot honored, execution will
** continue without error or notification. {END} This is why the limit is
** called a "soft" limit. It is advisory only.
**
** Prior to SQLite version 3.5.0, this routine only constrained the memory
** allocated by a single thread - the same thread in which this routine
** runs. Beginning with SQLite version 3.5.0, the soft heap limit is
** applied to all threads. {F16357} The value specified for the soft heap limit
** is an upper bound on the total memory allocation for all threads. {END} In
** version 3.5.0 there is no mechanism for limiting the heap usage for
** individual threads.
*/
/*IMPORT_C*/ void sqlite3_soft_heap_limit(int);
/*
** CAPI3REF: Extract Metadata About A Column Of A Table {F12850}
**
** This routine
** returns meta-data about a specific column of a specific database
** table accessible using the connection handle passed as the first function
** argument.
**
** The column is identified by the second, third and fourth parameters to
** this function. The second parameter is either the name of the database
** (i.e. "main", "temp" or an attached database) containing the specified
** table or NULL. If it is NULL, then all attached databases are searched
** for the table using the same algorithm as the database engine uses to
** resolve unqualified table references.
**
** The third and fourth parameters to this function are the table and column
** name of the desired column, respectively. Neither of these parameters
** may be NULL.
**
** Meta information is returned by writing to the memory locations passed as
** the 5th and subsequent parameters to this function. Any of these
** arguments may be NULL, in which case the corresponding element of meta
** information is ommitted.
**
** <pre>
** Parameter Output Type Description
** -----------------------------------
**
** 5th const char* Data type
** 6th const char* Name of the default collation sequence
** 7th int True if the column has a NOT NULL constraint
** 8th int True if the column is part of the PRIMARY KEY
** 9th int True if the column is AUTOINCREMENT
** </pre>
**
**
** The memory pointed to by the character pointers returned for the
** declaration type and collation sequence is valid only until the next
** call to any sqlite API function.
**
** If the specified table is actually a view, then an error is returned.
**
** If the specified column is "rowid", "oid" or "_rowid_" and an
** INTEGER PRIMARY KEY column has been explicitly declared, then the output
** parameters are set for the explicitly declared column. If there is no
** explicitly declared IPK column, then the output parameters are set as
** follows:
**
** <pre>
** data type: "INTEGER"
** collation sequence: "BINARY"
** not null: 0
** primary key: 1
** auto increment: 0
** </pre>
**
** This function may load one or more schemas from database files. If an
** error occurs during this process, or if the requested table or column
** cannot be found, an SQLITE error code is returned and an error message
** left in the database handle (to be retrieved using sqlite3_errmsg()).
**
** This API is only available if the library was compiled with the
** SQLITE_ENABLE_COLUMN_METADATA preprocessor symbol defined.
*/
/*IMPORT_C*/ int sqlite3_table_column_metadata(
sqlite3 *db, /* Connection handle */
const char *zDbName, /* Database name or NULL */
const char *zTableName, /* Table name */
const char *zColumnName, /* Column name */
char const **pzDataType, /* OUTPUT: Declared data type */
char const **pzCollSeq, /* OUTPUT: Collation sequence name */
int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */
int *pPrimaryKey, /* OUTPUT: True if column part of PK */
int *pAutoinc /* OUTPUT: True if column is auto-increment */
);
/*
** CAPI3REF: Load An Extension {F12600}
**
** {F12601} The sqlite3_load_extension() interface
** attempts to load an SQLite extension library contained in the file
** zFile. {F12602} The entry point is zProc. {F12603} zProc may be 0
** in which case the name of the entry point defaults
** to "sqlite3_extension_init".
**
** {F12604} The sqlite3_load_extension() interface shall
** return [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
**
** {F12605}
** If an error occurs and pzErrMsg is not 0, then the
** sqlite3_load_extension() interface shall attempt to fill *pzErrMsg with
** error message text stored in memory obtained from [sqlite3_malloc()].
** {END} The calling function should free this memory
** by calling [sqlite3_free()].
**
** {F12606}
** Extension loading must be enabled using [sqlite3_enable_load_extension()]
** prior to calling this API or an error will be returned.
*/
/*IMPORT_C*/ int sqlite3_load_extension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Derived from zFile if 0 */
char **pzErrMsg /* Put error message here if not 0 */
);
/*
** CAPI3REF: Enable Or Disable Extension Loading {F12620}
**
** So as not to open security holes in older applications that are
** unprepared to deal with extension loading, and as a means of disabling
** extension loading while evaluating user-entered SQL, the following
** API is provided to turn the [sqlite3_load_extension()] mechanism on and
** off. {F12622} It is off by default. {END} See ticket #1863.
**
** {F12621} Call the sqlite3_enable_load_extension() routine
** with onoff==1 to turn extension loading on
** and call it with onoff==0 to turn it back off again. {END}
*/
/*IMPORT_C*/ int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
/*
** CAPI3REF: Make Arrangements To Automatically Load An Extension {F12640}
**
** {F12641} This function
** registers an extension entry point that is automatically invoked
** whenever a new database connection is opened using
** [sqlite3_open()], [sqlite3_open16()], or [sqlite3_open_v2()]. {END}
**
** This API can be invoked at program startup in order to register
** one or more statically linked extensions that will be available
** to all new database connections.
**
** {F12642} Duplicate extensions are detected so calling this routine multiple
** times with the same extension is harmless.
**
** {F12643} This routine stores a pointer to the extension in an array
** that is obtained from sqlite_malloc(). {END} If you run a memory leak
** checker on your program and it reports a leak because of this
** array, then invoke [sqlite3_reset_auto_extension()] prior
** to shutdown to free the memory.
**
** {F12644} Automatic extensions apply across all threads. {END}
**
** This interface is experimental and is subject to change or
** removal in future releases of SQLite.
*/
/*IMPORT_C*/ int sqlite3_auto_extension(void *xEntryPoint);
/*
** CAPI3REF: Reset Automatic Extension Loading {F12660}
**
** {F12661} This function disables all previously registered
** automatic extensions. {END} This
** routine undoes the effect of all prior [sqlite3_automatic_extension()]
** calls.
**
** {F12662} This call disabled automatic extensions in all threads. {END}
**
** This interface is experimental and is subject to change or
** removal in future releases of SQLite.
*/
/*IMPORT_C*/ void sqlite3_reset_auto_extension(void);
/*
****** EXPERIMENTAL - subject to change without notice **************
**
** The interface to the virtual-table mechanism is currently considered
** to be experimental. The interface might change in incompatible ways.
** If this is a problem for you, do not use the interface at this time.
**
** When the virtual-table mechanism stablizes, we will declare the
** interface fixed, support it indefinitely, and remove this comment.
*/
/*
** Structures used by the virtual table interface
*/
typedef struct sqlite3_vtab sqlite3_vtab;
typedef struct sqlite3_index_info sqlite3_index_info;
typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor;
typedef struct sqlite3_module sqlite3_module;
/*
** A module is a class of virtual tables. Each module is defined
** by an instance of the following structure. This structure consists
** mostly of methods for the module.
*/
struct sqlite3_module {
int iVersion;
int (*xCreate)(sqlite3*, void *pAux,
int argc, const char *const*argv,
sqlite3_vtab **ppVTab, char**);
int (*xConnect)(sqlite3*, void *pAux,
int argc, const char *const*argv,
sqlite3_vtab **ppVTab, char**);
int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*);
int (*xDisconnect)(sqlite3_vtab *pVTab);
int (*xDestroy)(sqlite3_vtab *pVTab);
int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor);
int (*xClose)(sqlite3_vtab_cursor*);
int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr,
int argc, sqlite3_value **argv);
int (*xNext)(sqlite3_vtab_cursor*);
int (*xEof)(sqlite3_vtab_cursor*);
int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int);
int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid);
int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *);
int (*xBegin)(sqlite3_vtab *pVTab);
int (*xSync)(sqlite3_vtab *pVTab);
int (*xCommit)(sqlite3_vtab *pVTab);
int (*xRollback)(sqlite3_vtab *pVTab);
int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
void **ppArg);
int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
};
/*
** The sqlite3_index_info structure and its substructures is used to
** pass information into and receive the reply from the xBestIndex
** method of an sqlite3_module. The fields under **Inputs** are the
** inputs to xBestIndex and are read-only. xBestIndex inserts its
** results into the **Outputs** fields.
**
** The aConstraint[] array records WHERE clause constraints of the
** form:
**
** column OP expr
**
** Where OP is =, <, <=, >, or >=.
** The particular operator is stored
** in aConstraint[].op. The index of the column is stored in
** aConstraint[].iColumn. aConstraint[].usable is TRUE if the
** expr on the right-hand side can be evaluated (and thus the constraint
** is usable) and false if it cannot.
**
** The optimizer automatically inverts terms of the form "expr OP column"
** and makes other simplifications to the WHERE clause in an attempt to
** get as many WHERE clause terms into the form shown above as possible.
** The aConstraint[] array only reports WHERE clause terms in the correct
** form that refer to the particular virtual table being queried.
**
** Information about the ORDER BY clause is stored in aOrderBy[].
** Each term of aOrderBy records a column of the ORDER BY clause.
**
** The xBestIndex method must fill aConstraintUsage[] with information
** about what parameters to pass to xFilter. If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated
** and becomes the argvIndex-th entry in argv. If aConstraintUsage[].omit
** is true, then the constraint is assumed to be fully handled by the
** virtual table and is not checked again by SQLite.
**
** The idxNum and idxPtr values are recorded and passed into xFilter.
** sqlite3_free() is used to free idxPtr if needToFreeIdxPtr is true.
**
** The orderByConsumed means that output from xFilter will occur in
** the correct order to satisfy the ORDER BY clause so that no separate
** sorting step is required.
**
** The estimatedCost value is an estimate of the cost of doing the
** particular lookup. A full scan of a table with N entries should have
** a cost of N. A binary search of a table of N entries should have a
** cost of approximately log(N).
*/
struct sqlite3_index_info {
/* Inputs */
int nConstraint; /* Number of entries in aConstraint */
struct sqlite3_index_constraint {
int iColumn; /* Column on left-hand side of constraint */
unsigned char op; /* Constraint operator */
unsigned char usable; /* True if this constraint is usable */
int iTermOffset; /* Used internally - xBestIndex should ignore */
} *aConstraint; /* Table of WHERE clause constraints */
int nOrderBy; /* Number of terms in the ORDER BY clause */
struct sqlite3_index_orderby {
int iColumn; /* Column number */
unsigned char desc; /* True for DESC. False for ASC. */
} *aOrderBy; /* The ORDER BY clause */
/* Outputs */
struct sqlite3_index_constraint_usage {
int argvIndex; /* if >0, constraint is part of argv to xFilter */
unsigned char omit; /* Do not code a test for this constraint */
} *aConstraintUsage;
int idxNum; /* Number used to identify the index */
char *idxStr; /* String, possibly obtained from sqlite3_malloc */
int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
int orderByConsumed; /* True if output is already ordered */
double estimatedCost; /* Estimated cost of using this index */
};
#define SQLITE_INDEX_CONSTRAINT_EQ 2
#define SQLITE_INDEX_CONSTRAINT_GT 4
#define SQLITE_INDEX_CONSTRAINT_LE 8
#define SQLITE_INDEX_CONSTRAINT_LT 16
#define SQLITE_INDEX_CONSTRAINT_GE 32
#define SQLITE_INDEX_CONSTRAINT_MATCH 64
/*
** This routine is used to register a new module name with an SQLite
** connection. Module names must be registered before creating new
** virtual tables on the module, or before using preexisting virtual
** tables of the module.
*/
/*IMPORT_C*/ int sqlite3_create_module(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *, /* Methods for the module */
void * /* Client data for xCreate/xConnect */
);
/*
** This routine is identical to the sqlite3_create_module() method above,
** except that it allows a destructor function to be specified. It is
** even more experimental than the rest of the virtual tables API.
*/
/*IMPORT_C*/ int sqlite3_create_module_v2(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *, /* Methods for the module */
void *, /* Client data for xCreate/xConnect */
void(*xDestroy)(void*) /* Module destructor function */
);
/*
** Every module implementation uses a subclass of the following structure
** to describe a particular instance of the module. Each subclass will
** be tailored to the specific needs of the module implementation. The
** purpose of this superclass is to define certain fields that are common
** to all module implementations.
**
** Virtual tables methods can set an error message by assigning a
** string obtained from sqlite3_mprintf() to zErrMsg. The method should
** take care that any prior string is freed by a call to sqlite3_free()
** prior to assigning a new string to zErrMsg. After the error message
** is delivered up to the client application, the string will be automatically
** freed by sqlite3_free() and the zErrMsg field will be zeroed. Note
** that sqlite3_mprintf() and sqlite3_free() are used on the zErrMsg field
** since virtual tables are commonly implemented in loadable extensions which
** do not have access to sqlite3MPrintf() or sqlite3Free().
*/
struct sqlite3_vtab {
const sqlite3_module *pModule; /* The module for this virtual table */
int nRef; /* Used internally */
char *zErrMsg; /* Error message from sqlite3_mprintf() */
/* Virtual table implementations will typically add additional fields */
};
/* Every module implementation uses a subclass of the following structure
** to describe cursors that point into the virtual table and are used
** to loop through the virtual table. Cursors are created using the
** xOpen method of the module. Each module implementation will define
** the content of a cursor structure to suit its own needs.
**
** This superclass exists in order to define fields of the cursor that
** are common to all implementations.
*/
struct sqlite3_vtab_cursor {
sqlite3_vtab *pVtab; /* Virtual table of this cursor */
/* Virtual table implementations will typically add additional fields */
};
/*
** The xCreate and xConnect methods of a module use the following API
** to declare the format (the names and datatypes of the columns) of
** the virtual tables they implement.
*/
/*IMPORT_C*/ int sqlite3_declare_vtab(sqlite3*, const char *zCreateTable);
/*
** Virtual tables can provide alternative implementations of functions
** using the xFindFunction method. But global versions of those functions
** must exist in order to be overloaded.
**
** This API makes sure a global version of a function with a particular
** name and number of parameters exists. If no such function exists
** before this API is called, a new function is created. The implementation
** of the new function always causes an exception to be thrown. So
** the new function is not good for anything by itself. Its only
** purpose is to be a place-holder function that can be overloaded
** by virtual tables.
**
** This API should be considered part of the virtual table interface,
** which is experimental and subject to change.
*/
/*IMPORT_C*/ int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
/*
** The interface to the virtual-table mechanism defined above (back up
** to a comment remarkably similar to this one) is currently considered
** to be experimental. The interface might change in incompatible ways.
** If this is a problem for you, do not use the interface at this time.
**
** When the virtual-table mechanism stabilizes, we will declare the
** interface fixed, support it indefinitely, and remove this comment.
**
****** EXPERIMENTAL - subject to change without notice **************
*/
/*
** CAPI3REF: A Handle To An Open BLOB {F17800}
**
** An instance of the following opaque structure is used to
** represent an blob-handle. A blob-handle is created by
** [sqlite3_blob_open()] and destroyed by [sqlite3_blob_close()].
** The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
** can be used to read or write small subsections of the blob.
** The [sqlite3_blob_bytes()] interface returns the size of the
** blob in bytes.
*/
typedef struct sqlite3_blob sqlite3_blob;
/*
** CAPI3REF: Open A BLOB For Incremental I/O {F17810}
**
** {F17811} This interfaces opens a handle to the blob located
** in row iRow,, column zColumn, table zTable in database zDb;
** in other words, the same blob that would be selected by:
**
** <pre>
** SELECT zColumn FROM zDb.zTable WHERE rowid = iRow;
** </pre> {END}
**
** {F17812} If the flags parameter is non-zero, the blob is opened for
** read and write access. If it is zero, the blob is opened for read
** access. {END}
**
** {F17813} On success, [SQLITE_OK] is returned and the new
** [sqlite3_blob | blob handle] is written to *ppBlob.
** {F17814} Otherwise an error code is returned and
** any value written to *ppBlob should not be used by the caller.
** {F17815} This function sets the database-handle error code and message
** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()].
** <todo>We should go through and mark all interfaces that behave this
** way with a similar statement</todo>
*/
/*IMPORT_C*/ int sqlite3_blob_open(
sqlite3*,
const char *zDb,
const char *zTable,
const char *zColumn,
sqlite3_int64 iRow,
int flags,
sqlite3_blob **ppBlob
);
/*
** CAPI3REF: Close A BLOB Handle {F17830}
**
** Close an open [sqlite3_blob | blob handle].
**
** {F17831} Closing a BLOB shall cause the current transaction to commit
** if there are no other BLOBs, no pending prepared statements, and the
** database connection is in autocommit mode.
** {F17832} If any writes were made to the BLOB, they might be held in cache
** until the close operation if they will fit. {END}
** Closing the BLOB often forces the changes
** out to disk and so if any I/O errors occur, they will likely occur
** at the time when the BLOB is closed. {F17833} Any errors that occur during
** closing are reported as a non-zero return value.
**
** {F17839} The BLOB is closed unconditionally. Even if this routine returns
** an error code, the BLOB is still closed.
*/
/*IMPORT_C*/ int sqlite3_blob_close(sqlite3_blob *);
/*
** CAPI3REF: Return The Size Of An Open BLOB {F17805}
**
** {F16806} Return the size in bytes of the blob accessible via the open
** [sqlite3_blob | blob-handle] passed as an argument.
*/
/*IMPORT_C*/ int sqlite3_blob_bytes(sqlite3_blob *);
/*
** CAPI3REF: Read Data From A BLOB Incrementally {F17850}
**
** This function is used to read data from an open
** [sqlite3_blob | blob-handle] into a caller supplied buffer.
** {F17851} n bytes of data are copied into buffer
** z from the open blob, starting at offset iOffset.
**
** {F17852} If offset iOffset is less than n bytes from the end of the blob,
** [SQLITE_ERROR] is returned and no data is read. {F17853} If n is
** less than zero [SQLITE_ERROR] is returned and no data is read.
**
** {F17854} On success, SQLITE_OK is returned. Otherwise, an
** [SQLITE_ERROR | SQLite error code] or an
** [SQLITE_IOERR_READ | extended error code] is returned.
*/
/*IMPORT_C*/ int sqlite3_blob_read(sqlite3_blob *, void *z, int n, int iOffset);
/*
** CAPI3REF: Write Data Into A BLOB Incrementally {F17870}
**
** This function is used to write data into an open
** [sqlite3_blob | blob-handle] from a user supplied buffer.
** {F17871} n bytes of data are copied from the buffer
** pointed to by z into the open blob, starting at offset iOffset.
**
** {F17872} If the [sqlite3_blob | blob-handle] passed as the first argument
** was not opened for writing (the flags parameter to [sqlite3_blob_open()]
*** was zero), this function returns [SQLITE_READONLY].
**
** {F17873} This function may only modify the contents of the blob; it is
** not possible to increase the size of a blob using this API.
** {F17874} If offset iOffset is less than n bytes from the end of the blob,
** [SQLITE_ERROR] is returned and no data is written. {F17875} If n is
** less than zero [SQLITE_ERROR] is returned and no data is written.
**
** {F17876} On success, SQLITE_OK is returned. Otherwise, an
** [SQLITE_ERROR | SQLite error code] or an
** [SQLITE_IOERR_READ | extended error code] is returned.
*/
/*IMPORT_C*/ int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
/*
** CAPI3REF: Virtual File System Objects {F11200}
**
** A virtual filesystem (VFS) is an [sqlite3_vfs] object
** that SQLite uses to interact
** with the underlying operating system. Most builds come with a
** single default VFS that is appropriate for the host computer.
** New VFSes can be registered and existing VFSes can be unregistered.
** The following interfaces are provided.
**
** {F11201} The sqlite3_vfs_find() interface returns a pointer to
** a VFS given its name. {F11202} Names are case sensitive.
** {F11203} Names are zero-terminated UTF-8 strings.
** {F11204} If there is no match, a NULL
** pointer is returned. {F11205} If zVfsName is NULL then the default
** VFS is returned. {END}
**
** {F11210} New VFSes are registered with sqlite3_vfs_register().
** {F11211} Each new VFS becomes the default VFS if the makeDflt flag is set.
** {F11212} The same VFS can be registered multiple times without injury.
** {F11213} To make an existing VFS into the default VFS, register it again
** with the makeDflt flag set. {U11214} If two different VFSes with the
** same name are registered, the behavior is undefined. {U11215} If a
** VFS is registered with a name that is NULL or an empty string,
** then the behavior is undefined.
**
** {F11220} Unregister a VFS with the sqlite3_vfs_unregister() interface.
** {F11221} If the default VFS is unregistered, another VFS is chosen as
** the default. The choice for the new VFS is arbitrary.
*/
/*IMPORT_C*/ sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
/*IMPORT_C*/ int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
/*IMPORT_C*/ int sqlite3_vfs_unregister(sqlite3_vfs*);
/*
** CAPI3REF: Mutexes {F17000}
**
** The SQLite core uses these routines for thread
** synchronization. Though they are intended for internal
** use by SQLite, code that links against SQLite is
** permitted to use any of these routines.
**
** The SQLite source code contains multiple implementations
** of these mutex routines. An appropriate implementation
** is selected automatically at compile-time. The following
** implementations are available in the SQLite core:
**
** <ul>
** <li> SQLITE_MUTEX_OS2
** <li> SQLITE_MUTEX_PTHREAD
** <li> SQLITE_MUTEX_W32
** <li> SQLITE_MUTEX_NOOP
** </ul>
**
** The SQLITE_MUTEX_NOOP implementation is a set of routines
** that does no real locking and is appropriate for use in
** a single-threaded application. The SQLITE_MUTEX_OS2,
** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
** are appropriate for use on os/2, unix, and windows.
**
** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
** implementation is included with the library. The
** mutex interface routines defined here become external
** references in the SQLite library for which implementations
** must be provided by the application. This facility allows an
** application that links against SQLite to provide its own mutex
** implementation without having to modify the SQLite core.
**
** {F17011} The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it. {F17012} If it returns NULL
** that means that a mutex could not be allocated. {F17013} SQLite
** will unwind its stack and return an error. {F17014} The argument
** to sqlite3_mutex_alloc() is one of these integer constants:
**
** <ul>
** <li> SQLITE_MUTEX_FAST
** <li> SQLITE_MUTEX_RECURSIVE
** <li> SQLITE_MUTEX_STATIC_MASTER
** <li> SQLITE_MUTEX_STATIC_MEM
** <li> SQLITE_MUTEX_STATIC_MEM2
** <li> SQLITE_MUTEX_STATIC_PRNG
** <li> SQLITE_MUTEX_STATIC_LRU
** </ul> {END}
**
** {F17015} The first two constants cause sqlite3_mutex_alloc() to create
** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
** is used but not necessarily so when SQLITE_MUTEX_FAST is used. {END}
** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
** not want to. {F17016} But SQLite will only request a recursive mutex in
** cases where it really needs one. {END} If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.
**
** {F17017} The other allowed parameters to sqlite3_mutex_alloc() each return
** a pointer to a static preexisting mutex. {END} Four static mutexes are
** used by the current version of SQLite. Future versions of SQLite
** may add additional static mutexes. Static mutexes are for internal
** use by SQLite only. Applications that use SQLite mutexes should
** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
** SQLITE_MUTEX_RECURSIVE.
**
** {F17018} Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
** returns a different mutex on every call. {F17034} But for the static
** mutex types, the same mutex is returned on every call that has
** the same type number. {END}
**
** {F17019} The sqlite3_mutex_free() routine deallocates a previously
** allocated dynamic mutex. {F17020} SQLite is careful to deallocate every
** dynamic mutex that it allocates. {U17021} The dynamic mutexes must not be in
** use when they are deallocated. {U17022} Attempting to deallocate a static
** mutex results in undefined behavior. {F17023} SQLite never deallocates
** a static mutex. {END}
**
** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex. {F17024} If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
** SQLITE_BUSY. {F17025} The sqlite3_mutex_try() interface returns SQLITE_OK
** upon successful entry. {F17026} Mutexes created using
** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
** {F17027} In such cases the,
** mutex must be exited an equal number of times before another thread
** can enter. {U17028} If the same thread tries to enter any other
** kind of mutex more than once, the behavior is undefined.
** {F17029} SQLite will never exhibit
** such behavior in its own use of mutexes. {END}
**
** Some systems (ex: windows95) do not the operation implemented by
** sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() will
** always return SQLITE_BUSY. {F17030} The SQLite core only ever uses
** sqlite3_mutex_try() as an optimization so this is acceptable behavior. {END}
**
** {F17031} The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread. {U17032} The behavior
** is undefined if the mutex is not currently entered by the
** calling thread or is not currently allocated. {F17033} SQLite will
** never do either. {END}
**
** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
*/
/*IMPORT_C*/ sqlite3_mutex *sqlite3_mutex_alloc(int);
/*IMPORT_C*/ void sqlite3_mutex_free(sqlite3_mutex*);
/*IMPORT_C*/ void sqlite3_mutex_enter(sqlite3_mutex*);
/*IMPORT_C*/ int sqlite3_mutex_try(sqlite3_mutex*);
/*IMPORT_C*/ void sqlite3_mutex_leave(sqlite3_mutex*);
/*
** CAPI3REF: Mutex Verifcation Routines {F17080}
**
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
** are intended for use inside assert() statements. {F17081} The SQLite core
** never uses these routines except inside an assert() and applications
** are advised to follow the lead of the core. {F17082} The core only
** provides implementations for these routines when it is compiled
** with the SQLITE_DEBUG flag. {U17087} External mutex implementations
** are only required to provide these routines if SQLITE_DEBUG is
** defined and if NDEBUG is not defined.
**
** {F17083} These routines should return true if the mutex in their argument
** is held or not held, respectively, by the calling thread. {END}
**
** {X17084} The implementation is not required to provided versions of these
** routines that actually work.
** If the implementation does not provide working
** versions of these routines, it should at least provide stubs
** that always return true so that one does not get spurious
** assertion failures. {END}
**
** {F17085} If the argument to sqlite3_mutex_held() is a NULL pointer then
** the routine should return 1. {END} This seems counter-intuitive since
** clearly the mutex cannot be held if it does not exist. But the
** the reason the mutex does not exist is because the build is not
** using mutexes. And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is
** the appropriate thing to do. {F17086} The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.
*/
/*IMPORT_C*/ int sqlite3_mutex_held(sqlite3_mutex*);
/*IMPORT_C*/ int sqlite3_mutex_notheld(sqlite3_mutex*);
/*
** CAPI3REF: Mutex Types {F17001}
**
** {F17002} The [sqlite3_mutex_alloc()] interface takes a single argument
** which is one of these integer constants. {END}
*/
#define SQLITE_MUTEX_FAST 0
#define SQLITE_MUTEX_RECURSIVE 1
#define SQLITE_MUTEX_STATIC_MASTER 2
#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
#define SQLITE_MUTEX_STATIC_MEM2 4 /* sqlite3_release_memory() */
#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
/*
** CAPI3REF: Low-Level Control Of Database Files {F11300}
**
** {F11301} The [sqlite3_file_control()] interface makes a direct call to the
** xFileControl method for the [sqlite3_io_methods] object associated
** with a particular database identified by the second argument. {F11302} The
** name of the database is the name assigned to the database by the
** <a href="lang_attach.html">ATTACH</a> SQL command that opened the
** database. {F11303} To control the main database file, use the name "main"
** or a NULL pointer. {F11304} The third and fourth parameters to this routine
** are passed directly through to the second and third parameters of
** the xFileControl method. {F11305} The return value of the xFileControl
** method becomes the return value of this routine.
**
** {F11306} If the second parameter (zDbName) does not match the name of any
** open database file, then SQLITE_ERROR is returned. {F11307} This error
** code is not remembered and will not be recalled by [sqlite3_errcode()]
** or [sqlite3_errmsg()]. {U11308} The underlying xFileControl method might
** also return SQLITE_ERROR. {U11309} There is no way to distinguish between
** an incorrect zDbName and an SQLITE_ERROR return from the underlying
** xFileControl method. {END}
**
** See also: [SQLITE_FCNTL_LOCKSTATE]
*/
/*IMPORT_C*/ int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
/*IMPORT_C*/ int sqlite3_openTest(
const char *zFilename
);
/*IMPORT_C*/ int sqlite3_bind_double_ref(sqlite3_stmt *stmt, int iCol, double *val);
/*IMPORT_C*/ int sqlite3_bind_int64_ref(sqlite3_stmt *stmt, int iCol, sqlite_int64 *val);
/*IMPORT_C*/ void sqlite3_column_double_ref(sqlite3_stmt *stmt, int iCol, double *val);
/*IMPORT_C*/ void sqlite3_column_int64_ref(sqlite3_stmt *stmt, int iCol, sqlite_int64 *val);
/*IMPORT_C*/ unsigned int sqlite3_strlen(char *ptr);
/*
** Undo the hack that converts floating point types to integer for
** builds on processors without floating point support.
*/
#ifdef SQLITE_OMIT_FLOATING_POINT
# undef double
#endif
#ifdef __cplusplus
} /* End of the 'extern "C"' block */
#endif
#endif