diff -r 4a65cc85c4f3 -r fbd95db6a4e1 engine/sqlite/src/utf.cpp --- a/engine/sqlite/src/utf.cpp Wed Apr 28 13:20:05 2010 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,545 +0,0 @@ -/* -** 2004 April 13 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains routines used to translate between UTF-8, -** UTF-16, UTF-16BE, and UTF-16LE. -** -** $Id: utf.cpp 1282 2008-11-13 09:31:33Z LarsPson $ -** -** Notes on UTF-8: -** -** Byte-0 Byte-1 Byte-2 Byte-3 Value -** 0xxxxxxx 00000000 00000000 0xxxxxxx -** 110yyyyy 10xxxxxx 00000000 00000yyy yyxxxxxx -** 1110zzzz 10yyyyyy 10xxxxxx 00000000 zzzzyyyy yyxxxxxx -** 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx 000uuuuu zzzzyyyy yyxxxxxx -** -** -** Notes on UTF-16: (with wwww+1==uuuuu) -** -** Word-0 Word-1 Value -** 110110ww wwzzzzyy 110111yy yyxxxxxx 000uuuuu zzzzyyyy yyxxxxxx -** zzzzyyyy yyxxxxxx 00000000 zzzzyyyy yyxxxxxx -** -** -** BOM or Byte Order Mark: -** 0xff 0xfe little-endian utf-16 follows -** 0xfe 0xff big-endian utf-16 follows -** -*/ -#include "sqliteInt.h" -#include -#include "vdbeInt.h" - -/* -** The following constant value is used by the SQLITE_BIGENDIAN and -** SQLITE_LITTLEENDIAN macros. -*/ -const int sqlite3one = 1; - -/* -** This lookup table is used to help decode the first byte of -** a multi-byte UTF8 character. -*/ -static const unsigned char sqlite3UtfTrans1[] = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00, -}; - - -#define WRITE_UTF8(zOut, c) { \ - if( c<0x00080 ){ \ - *zOut++ = (c&0xFF); \ - } \ - else if( c<0x00800 ){ \ - *zOut++ = 0xC0 + ((c>>6)&0x1F); \ - *zOut++ = 0x80 + (c & 0x3F); \ - } \ - else if( c<0x10000 ){ \ - *zOut++ = 0xE0 + ((c>>12)&0x0F); \ - *zOut++ = 0x80 + ((c>>6) & 0x3F); \ - *zOut++ = 0x80 + (c & 0x3F); \ - }else{ \ - *zOut++ = 0xF0 + ((c>>18) & 0x07); \ - *zOut++ = 0x80 + ((c>>12) & 0x3F); \ - *zOut++ = 0x80 + ((c>>6) & 0x3F); \ - *zOut++ = 0x80 + (c & 0x3F); \ - } \ -} - -#define WRITE_UTF16LE(zOut, c) { \ - if( c<=0xFFFF ){ \ - *zOut++ = (c&0x00FF); \ - *zOut++ = ((c>>8)&0x00FF); \ - }else{ \ - *zOut++ = (((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0)); \ - *zOut++ = (0x00D8 + (((c-0x10000)>>18)&0x03)); \ - *zOut++ = (c&0x00FF); \ - *zOut++ = (0x00DC + ((c>>8)&0x03)); \ - } \ -} - -#define WRITE_UTF16BE(zOut, c) { \ - if( c<=0xFFFF ){ \ - *zOut++ = ((c>>8)&0x00FF); \ - *zOut++ = (c&0x00FF); \ - }else{ \ - *zOut++ = (0x00D8 + (((c-0x10000)>>18)&0x03)); \ - *zOut++ = (((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0)); \ - *zOut++ = (0x00DC + ((c>>8)&0x03)); \ - *zOut++ = (c&0x00FF); \ - } \ -} - -#define READ_UTF16LE(zIn, c){ \ - c = (*zIn++); \ - c += ((*zIn++)<<8); \ - if( c>=0xD800 && c<0xE000 ){ \ - int c2 = (*zIn++); \ - c2 += ((*zIn++)<<8); \ - c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10); \ - if( (c & 0xFFFF0000)==0 ) c = 0xFFFD; \ - } \ -} - -#define READ_UTF16BE(zIn, c){ \ - c = ((*zIn++)<<8); \ - c += (*zIn++); \ - if( c>=0xD800 && c<0xE000 ){ \ - int c2 = ((*zIn++)<<8); \ - c2 += (*zIn++); \ - c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10); \ - if( (c & 0xFFFF0000)==0 ) c = 0xFFFD; \ - } \ -} - -/* -** Translate a single UTF-8 character. Return the unicode value. -** -** During translation, assume that the byte that zTerm points -** is a 0x00. -** -** Write a pointer to the next unread byte back into *pzNext. -** -** Notes On Invalid UTF-8: -** -** * This routine never allows a 7-bit character (0x00 through 0x7f) to -** be encoded as a multi-byte character. Any multi-byte character that -** attempts to encode a value between 0x00 and 0x7f is rendered as 0xfffd. -** -** * This routine never allows a UTF16 surrogate value to be encoded. -** If a multi-byte character attempts to encode a value between -** 0xd800 and 0xe000 then it is rendered as 0xfffd. -** -** * Bytes in the range of 0x80 through 0xbf which occur as the first -** byte of a character are interpreted as single-byte characters -** and rendered as themselves even though they are technically -** invalid characters. -** -** * This routine accepts an infinite number of different UTF8 encodings -** for unicode values 0x80 and greater. It do not change over-length -** encodings to 0xfffd as some systems recommend. -*/ -int sqlite3Utf8Read( - const unsigned char *z, /* First byte of UTF-8 character */ - const unsigned char *zTerm, /* Pretend this byte is 0x00 */ - const unsigned char **pzNext /* Write first byte past UTF-8 char here */ -){ - int c = *(z++); - if( c>=0xc0 ){ - c = sqlite3UtfTrans1[c-0xc0]; - while( z!=zTerm && (*z & 0xc0)==0x80 ){ - c = (c<<6) + (0x3f & *(z++)); - } - if( c<0x80 - || (c&0xFFFFF800)==0xD800 - || (c&0xFFFFFFFE)==0xFFFE ){ c = 0xFFFD; } - } - *pzNext = z; - return c; -} - - - -/* -** If the TRANSLATE_TRACE macro is defined, the value of each Mem is -** printed on stderr on the way into and out of sqlite3VdbeMemTranslate(). -*/ -/* #define TRANSLATE_TRACE 1 */ - -#ifndef SQLITE_OMIT_UTF16 -/* -** This routine transforms the internal text encoding used by pMem to -** desiredEnc. It is an error if the string is already of the desired -** encoding, or if *pMem does not contain a string value. -*/ -int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){ - unsigned char zShort[NBFS]; /* Temporary short output buffer */ - int len; /* Maximum length of output string in bytes */ - unsigned char *zOut; /* Output buffer */ - unsigned char *zIn; /* Input iterator */ - unsigned char *zTerm; /* End of input */ - unsigned char *z; /* Output iterator */ - unsigned int c; - - assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - assert( pMem->flags&MEM_Str ); - assert( pMem->enc!=desiredEnc ); - assert( pMem->enc!=0 ); - assert( pMem->n>=0 ); - -#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG) - { - char zBuf[100]; - sqlite3VdbeMemPrettyPrint(pMem, zBuf); - fprintf(stderr, "INPUT: %s\n", zBuf); - } -#endif - - /* If the translation is between UTF-16 little and big endian, then - ** all that is required is to swap the byte order. This case is handled - ** differently from the others. - */ - if( pMem->enc!=SQLITE_UTF8 && desiredEnc!=SQLITE_UTF8 ){ - u8 temp; - int rc; - rc = sqlite3VdbeMemMakeWriteable(pMem); - if( rc!=SQLITE_OK ){ - assert( rc==SQLITE_NOMEM ); - return SQLITE_NOMEM; - } - zIn = (u8*)pMem->z; - zTerm = &zIn[pMem->n]; - while( zInenc = desiredEnc; - goto translate_out; - } - - /* Set len to the maximum number of bytes required in the output buffer. */ - if( desiredEnc==SQLITE_UTF8 ){ - /* When converting from UTF-16, the maximum growth results from - ** translating a 2-byte character to a 4-byte UTF-8 character. - ** A single byte is required for the output string - ** nul-terminator. - */ - len = pMem->n * 2 + 1; - }else{ - /* When converting from UTF-8 to UTF-16 the maximum growth is caused - ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16 - ** character. Two bytes are required in the output buffer for the - ** nul-terminator. - */ - len = pMem->n * 2 + 2; - } - - /* Set zIn to point at the start of the input buffer and zTerm to point 1 - ** byte past the end. - ** - ** Variable zOut is set to point at the output buffer. This may be space - ** obtained from sqlite3_malloc(), or Mem.zShort, if it large enough and - ** not in use, or the zShort array on the stack (see above). - */ - zIn = (u8*)pMem->z; - zTerm = &zIn[pMem->n]; - if( len>NBFS ){ - zOut = (unsigned char*)sqlite3DbMallocRaw(pMem->db, len); - if( !zOut ){ - return SQLITE_NOMEM; - } - }else{ - zOut = zShort; - } - z = zOut; - - if( pMem->enc==SQLITE_UTF8 ){ - if( desiredEnc==SQLITE_UTF16LE ){ - /* UTF-8 -> UTF-16 Little-endian */ - while( zIn UTF-16 Big-endian */ - while( zInn = z - zOut; - *z++ = 0; - }else{ - assert( desiredEnc==SQLITE_UTF8 ); - if( pMem->enc==SQLITE_UTF16LE ){ - /* UTF-16 Little-endian -> UTF-8 */ - while( zIn UTF-8 */ - while( zInn = z - zOut; - } - *z = 0; - assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len ); - - sqlite3VdbeMemRelease(pMem); - pMem->flags &= ~(MEM_Static|MEM_Dyn|MEM_Ephem|MEM_Short); - pMem->enc = desiredEnc; - if( zOut==zShort ){ - memcpy(pMem->zShort, zOut, len); - zOut = (u8*)pMem->zShort; - pMem->flags |= (MEM_Term|MEM_Short); - }else{ - pMem->flags |= (MEM_Term|MEM_Dyn); - } - pMem->z = (char*)zOut; - -translate_out: -#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG) - { - char zBuf[100]; - sqlite3VdbeMemPrettyPrint(pMem, zBuf); - fprintf(stderr, "OUTPUT: %s\n", zBuf); - } -#endif - return SQLITE_OK; -} - -/* -** This routine checks for a byte-order mark at the beginning of the -** UTF-16 string stored in *pMem. If one is present, it is removed and -** the encoding of the Mem adjusted. This routine does not do any -** byte-swapping, it just sets Mem.enc appropriately. -** -** The allocation (static, dynamic etc.) and encoding of the Mem may be -** changed by this function. -*/ -int sqlite3VdbeMemHandleBom(Mem *pMem){ - int rc = SQLITE_OK; - u8 bom = 0; - - if( pMem->n<0 || pMem->n>1 ){ - u8 b1 = *(u8 *)pMem->z; - u8 b2 = *(((u8 *)pMem->z) + 1); - if( b1==0xFE && b2==0xFF ){ - bom = SQLITE_UTF16BE; - } - if( b1==0xFF && b2==0xFE ){ - bom = SQLITE_UTF16LE; - } - } - - if( bom ){ - /* This function is called as soon as a string is stored in a Mem*, - ** from within sqlite3VdbeMemSetStr(). At that point it is not possible - ** for the string to be stored in Mem.zShort, or for it to be stored - ** in dynamic memory with no destructor. - */ - assert( !(pMem->flags&MEM_Short) ); - assert( !(pMem->flags&MEM_Dyn) || pMem->xDel ); - if( pMem->flags & MEM_Dyn ){ - void (*xDel)(void*) = pMem->xDel; - char *z = pMem->z; - pMem->z = 0; - pMem->xDel = 0; - rc = sqlite3VdbeMemSetStr(pMem, &z[2], pMem->n-2, bom, - SQLITE_TRANSIENT); - xDel(z); - }else{ - rc = sqlite3VdbeMemSetStr(pMem, &pMem->z[2], pMem->n-2, bom, - SQLITE_TRANSIENT); - } - } - return rc; -} -#endif /* SQLITE_OMIT_UTF16 */ - -/* -** pZ is a UTF-8 encoded unicode string. If nByte is less than zero, -** return the number of unicode characters in pZ up to (but not including) -** the first 0x00 byte. If nByte is not less than zero, return the -** number of unicode characters in the first nByte of pZ (or up to -** the first 0x00, whichever comes first). -*/ -int sqlite3Utf8CharLen(const char *zIn, int nByte){ - int r = 0; - const u8 *z = (const u8*)zIn; - const u8 *zTerm; - if( nByte>=0 ){ - zTerm = &z[nByte]; - }else{ - zTerm = (const u8*)(-1); - } - assert( z<=zTerm ); - while( *z!=0 && zmallocFailed ){ - sqlite3VdbeMemRelease(&m); - m.z = 0; - } - assert( (m.flags & MEM_Term)!=0 || db->mallocFailed ); - assert( (m.flags & MEM_Str)!=0 || db->mallocFailed ); - return (m.flags & MEM_Dyn)!=0 ? m.z : sqlite3DbStrDup(db, m.z); -} - -/* -** pZ is a UTF-16 encoded unicode string. If nChar is less than zero, -** return the number of bytes up to (but not including), the first pair -** of consecutive 0x00 bytes in pZ. If nChar is not less than zero, -** then return the number of bytes in the first nChar unicode characters -** in pZ (or up until the first pair of 0x00 bytes, whichever comes first). -*/ -int sqlite3Utf16ByteLen(const void *zIn, int nChar){ - unsigned int c = 1; - char const *z = (const char*)zIn; - int n = 0; - if( SQLITE_UTF16NATIVE==SQLITE_UTF16BE ){ - /* Using an "if (SQLITE_UTF16NATIVE==SQLITE_UTF16BE)" construct here - ** and in other parts of this file means that at one branch will - ** not be covered by coverage testing on any single host. But coverage - ** will be complete if the tests are run on both a little-endian and - ** big-endian host. Because both the UTF16NATIVE and SQLITE_UTF16BE - ** macros are constant at compile time the compiler can determine - ** which branch will be followed. It is therefore assumed that no runtime - ** penalty is paid for this "if" statement. - */ - while( c && ((nChar<0) || n=0xD800 && i<=0xDFFF ) t = 0xFFFD; - if( (i&0xFFFFFFFE)==0xFFFE ) t = 0xFFFD; - assert( c==t ); - assert( (z-zBuf)==n ); - } - for(i=0; i<0x00110000; i++){ - if( i>=0xD800 && i<0xE000 ) continue; - z = zBuf; - WRITE_UTF16LE(z, i); - n = z-zBuf; - z[0] = 0; - z = zBuf; - READ_UTF16LE(z, c); - assert( c==i ); - assert( (z-zBuf)==n ); - } - for(i=0; i<0x00110000; i++){ - if( i>=0xD800 && i<0xE000 ) continue; - z = zBuf; - WRITE_UTF16BE(z, i); - n = z-zBuf; - z[0] = 0; - z = zBuf; - READ_UTF16BE(z, c); - assert( c==i ); - assert( (z-zBuf)==n ); - } -} -#endif /* SQLITE_TEST */ -#endif /* SQLITE_OMIT_UTF16 */