adaptationlayer/tsy/simatktsy_dll/internal/test/simatktsy_testtool/simatk/testfiles/simatk_closechannel.cfg
--- a/adaptationlayer/tsy/simatktsy_dll/internal/test/simatktsy_testtool/simatk/testfiles/simatk_closechannel.cfg Mon Nov 09 10:31:01 2009 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,166 +0,0 @@
-//* Copyright (c) 2008 Nokia Corporation and/or its subsidiary(-ies).
-//* All rights reserved.
-//* This component and the accompanying materials are made available
-//* under the terms of the License "Eclipse Public License v1.0"
-//* which accompanies this distribution, and is available
-//* at the URL "http://www.eclipse.org/legal/epl-v10.html".
-//*
-//* Initial Contributors:
-//* Nokia Corporation - initial contribution.
-//*
-//* Contributors:
-//*
-//* Description:
-
-//
-// Precondition:
-// - Detailed description can be found from Quality Center's Project: CoreSW_CASW/Module Tests/SIM ATK TSY/SimAtkTSY_testtool
-//
-// Script description (note: Open Channel command is used during the testing. Open Channel's script description can be found
-// from it's config file):
-
-// Proactive command //
-///////////////////////
-
-// AlphaId (Optional)
-// Enter the text inside the quotes or as unicode hex digits. Example: AlphaId "abc" or AlphaId 0x61 0x62 0x63
-
-// Destination (Optional, default = 0x21, Channel 1)
-// Command has to be aimed to some destination. Destinations are:
-// -1 Initialisation value
-// 0x01 The destination device for the proactive command is the keypad.
-// 0x02 The destination device for the proactive command is the display.
-// 0x03 The destination device for the proactive command is the earpiece.
-// 0x10 The destination device for the proactive command is the additional card reader 0.
-// 0x11 The destination device for the proactive command is the additional card reader 1.
-// 0x12 The destination device for the proactive command is the additional card reader 2.
-// 0x13 The destination device for the proactive command is the additional card reader 3.
-// 0x14 The destination device for the proactive command is the additional card reader 4.
-// 0x15 The destination device for the proactive command is the additional card reader 5.
-// 0x16 The destination device for the proactive command is the additional card reader 6.
-// 0x17 The destination device for the proactive command is the additional card reader 7.
-// 0x21 The destination device for the proactive command is the channel 1.
-// 0x22 The destination device for the proactive command is the channel 2.
-// 0x23 The destination device for the proactive command is the channel 3.
-// 0x24 The destination device for the proactive command is the channel 4.
-// 0x25 The destination device for the proactive command is the channel 5.
-// 0x26 The destination device for the proactive command is the channel 6.
-// 0x27 The destination device for the proactive command is the channel 7.
-// 0x81 The destination device for the proactive command is the UICC.
-// 0x82 The destination device for the proactive command is the Mobile Equipment, typically a phone.
-// 0x83 The destination device for the proactive command is the network.
-// Example destination channel 7: Destination 0x27
-
-// IconId (Optional, default = IconId 0 0)
-// IconQualifier
-// 0 NotSet
-// 1 NoIconId
-// 2 SelfExplanatory
-// 3 NotSelfExplanatory
-// IconIdentifier
-// Id number
-// Example SelfExplanatory ID 5: IconId 2 5
-
-// TextAttribute (Optional, default = 0, not initialized)
-// TA contains information how the text related to a command should be presented to a user. Status of TA
-// can be either not initialized, not provided or present. TA coding is specified in ETSI TS 123 040.
-// If TA is provided by the script, it is presumed that is should be provided also by the command.
-// Example TA provided: TextAttribute AA BB CC DD
-
-// Terminal Response //
-///////////////////////
-
-// GeneralResult (Optional, default = Success )
-// General result of the proactive command. Set this as described in
-// the proactive commands versus terminal response table in ETSI TS 102 223.
-
-// AdditionalInfo (Optional, default = "")
-// Contains additional information associated with certain error codes set in GeneralResult.
-// If the value in GeneralResult does not require any information then leave this field empty.
-
-// InfoType (Optional, default = NoAdditionalInfo )
-// If the value of GeneralResult requires additional information, set this to MeProblem.
-// Otherwise set to NoAdditionalInfo
-
-[Test]
-title MOD_0025.001_SIM_ATK_TSY_[CLOSE CHANNEL]
-
-create SimAtk simatk
-create SimAtkNotify openChannel
-create SimAtkNotify closeChannel
-
-// Open all
-simatk Connect RTelServer
-simatk Load PhoneTsy.tsy
-simatk Open DefaultPhone
-simatk Open SAT
-simatk Open IscControl
-
-// Load ISC XML -file
-simatk LoadIscTests SimAtk_CloseChannel.xml
-
-
-// Sequence 1.1 (CLOSE CHANNEL, successful)
-//
-openChannel UseObjectAddress simatk ESatNotifyOpenChannelPCmd
-closeChannel UseObjectAddress simatk ESatNotifyCloseChannelPCmd
-simatk RunIscTestCase 25 101
-waittestclass openChannel
-simatk CheckProactiveCommand CommandType ESatNotifyOpenChannelPCmd Bearer 2 BearerParams 02 04 05 05 10 02 BufferSize 1000 AccessName "\x06TestGp\x02rs" UserLogin "UserLog" UserPassword "UserPwd" SimMeInterface 2 44444 DestinationAddress "01.01.01.01"
-simatk SendTerminalResponse CommandType ESatNotifyOpenChannelPCmd BearerParams 00 04 05 05 10 02 BufferSize 1000 AdditionalInfo 81 0 InfoType ChannelStatusInfo
-
-simatk SyncIscTestCase
-waittestclass closeChannel
-simatk CheckProactiveCommand CommandType ESatNotifyCloseChannelPCmd
-simatk SendTerminalResponse CommandType ESatNotifyCloseChannelPCmd
-
-simatk WaitForRequest
-
-
-// Sequence 1.2 (CLOSE CHANNEL, with an invalid channel identifier)
-//
-openChannel UseObjectAddress simatk ESatNotifyOpenChannelPCmd
-closeChannel UseObjectAddress simatk ESatNotifyCloseChannelPCmd
-simatk RunIscTestCase 25 102
-waittestclass openChannel
-simatk CheckProactiveCommand CommandType ESatNotifyOpenChannelPCmd Bearer 2 BearerParams 02 04 05 05 10 02 BufferSize 1000 AccessName "\x06TestGp\x02rs" UserLogin "UserLog" UserPassword "UserPwd" SimMeInterface 2 44444 DestinationAddress "01.01.01.01"
-simatk SendTerminalResponse CommandType ESatNotifyOpenChannelPCmd BufferSize 1000 AdditionalInfo 81 0 InfoType ChannelStatusInfo BearerParams 00 04 05 05 10 02
-
-simatk SyncIscTestCase
-waittestclass closeChannel
-simatk CheckProactiveCommand CommandType ESatNotifyCloseChannelPCmd Destination 0x22
-simatk SendTerminalResponse CommandType ESatNotifyCloseChannelPCmd GeneralResult BearerIndepProtocolError InfoType MeProblem AdditionalInfo ChannelIdNotValid
-
-simatk WaitForRequest
-
-
-// Sequence 1.3 (CLOSE CHANNEL, on an already closed channel)
-//
-openChannel UseObjectAddress simatk ESatNotifyOpenChannelPCmd
-closeChannel UseObjectAddress simatk ESatNotifyCloseChannelPCmd
-simatk RunIscTestCase 25 103
-waittestclass openChannel
-simatk CheckProactiveCommand CommandType ESatNotifyOpenChannelPCmd Bearer 2 BearerParams 02 04 05 05 10 02 BufferSize 1000 AccessName "\x06TestGp\x02rs" UserLogin "UserLog" UserPassword "UserPwd" SimMeInterface 2 44444 DestinationAddress "01.01.01.01"
-simatk SendTerminalResponse CommandType ESatNotifyOpenChannelPCmd BufferSize 1000 AdditionalInfo 81 0 InfoType ChannelStatusInfo BearerParams 00 04 05 05 10 02
-
-simatk SyncIscTestCase
-waittestclass closeChannel
-simatk CheckProactiveCommand CommandType ESatNotifyCloseChannelPCmd
-simatk SendTerminalResponse CommandType ESatNotifyCloseChannelPCmd
-
-closeChannel UseObjectAddress simatk ESatNotifyCloseChannelPCmd
-simatk SyncIscTestCase
-waittestclass closeChannel
-simatk CheckProactiveCommand CommandType ESatNotifyCloseChannelPCmd
-simatk SendTerminalResponse CommandType ESatNotifyCloseChannelPCmd GeneralResult BearerIndepProtocolError InfoType MeProblem AdditionalInfo ChannelIdNotValid
-
-simatk WaitForRequest
-
-// close all
-simatk Close IscControl
-simatk Close SAT
-simatk Unload PhoneTsy.tsy
-simatk Close RTelServer
-delete simatk
-delete notify
-[Endtest]