/*
* Copyright (c) 2001-2006 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of the License "Eclipse Public License v1.0"
* which accompanies this distribution, and is available
* at the URL "http://www.eclipse.org/legal/epl-v10.html".
*
* Initial Contributors:
* Nokia Corporation - initial contribution.
*
* Contributors:
*
* Description:  EAP and WLAN authentication protocols.
*
*/

/*
* %version: 9 %
*/

#if !defined(_ABS_EAP_RADIUS_SESSION_H_)
#define _ABS_EAP_RADIUS_SESSION_H_

#include "eap_header.h"
#include "eap_array.h"

class eap_am_network_id_c;
class eap_buf_chain_wr_c;
class eap_configuration_field_c;
class eap_variable_data_c;
class abs_eap_base_type_c;
class abs_eap_state_notification_c;
class eap_base_type_c;
class eap_rogue_ap_entry_c;
class eap_radius_session_c;


/// This class defines the interface the eap_core_c class
/// will use with the partner class (lower layer).
class EAP_EXPORT abs_eap_radius_session_c
{
private:
	//--------------------------------------------------

	//--------------------------------------------------
protected:
	//--------------------------------------------------

	//--------------------------------------------------
public:
	//--------------------------------------------------

	/**
	 * The destructor of the abs_eap_core class does nothing special.
	 */
	virtual ~abs_eap_radius_session_c()
	{
	}

	/**
	 * The constructor of the abs_eap_core class does nothing special.
	 */
	abs_eap_radius_session_c()
	{
	}

	/**
	 * The derived class could send packets to partner class with this function.
	 * @see abs_eap_base_type_c::packet_send().
	 */
	virtual eap_status_e packet_send(
		const eap_am_network_id_c * const network_id,
		eap_buf_chain_wr_c * const sent_packet,
		const u32_t header_offset,
		const u32_t data_length,
		const u32_t buffer_length,
		eap_radius_session_c * const session
		) = 0;

	/**
	 * The get_header_offset() function obtains the header offset of EAP-packet.
	 * @see abs_eap_base_type_c::get_header_offset().
	 */
	virtual u32_t get_header_offset(
		u32_t * const MTU,
		u32_t * const trailer_length) = 0;

	/**
	 * The load_module() function function indicates the lower level to
	 * load new module of EAP-type.
	 * @param type is the requested EAP-type.
	 * @param partner is pointer to the caller object.
	 * The partner of the new created EAP-type object is the caller object.
	 * @param eap_type is a pointer to a pointer of EAP-type object.
	 * Adaptation module sets eap_type pointer to created EAP-type object.
	 * @param is_client_when_true parameter indicates whether the network entity should
	 * act as a client (true) or server (false), in terms of EAP-protocol whether
	 * this network entity is EAP-supplicant (true) or EAP-authenticator (false).
	 * @param receive_network_id includes the addresses (network identity) and packet type.
	 */
	virtual eap_status_e load_module(
		const eap_type_value_e type,
		const eap_type_value_e /* tunneling_type */,
		abs_eap_base_type_c * const partner,
		eap_base_type_c ** const eap_type,
		const bool is_client_when_true,
		const eap_am_network_id_c * const receive_network_id) = 0;

	/**
	 * The unload_module() function unloads the module of a EAP-type. 
	 * @param eap_type is the requested EAP-type.
	 */
	virtual eap_status_e unload_module(const eap_type_value_e eap_type) = 0;

	/**
	 * The session calls the restart_authentication() function
	 * when EAP-authentication is needed with another peer.
	 * This is also used when session restarts authentication.
	 * @param receive_network_id includes the addresses (network identity) and packet type.
	 * @param is_client_when_true indicates whether the EAP-type should act as a client or server,
	 * in terms of EAP-protocol whether this network entity is EAP-supplicant (true) or EAP-authenticator (false).
	 * @param force_clean_restart this selects whether the server removes this session (true) or not (false).
	 * @param from_timer tells whether the timer calls this function (true) or not (false).
	 */
	virtual eap_status_e restart_authentication(
		const eap_am_network_id_c * const receive_network_id,
		const bool is_client_when_true,
		const bool force_clean_restart,
		const bool from_timer = false) = 0;

	/**
	 * The read_configure() function reads the configuration data identified
	 * by the field string of field_length bytes length. Adaptation module must direct
	 * the query to some persistent store.
	 * @see abs_eap_base_type_c::read_configure().
	 */
	virtual eap_status_e read_configure(
		const eap_configuration_field_c * const field,
		eap_variable_data_c * const data) = 0;

	/**
	 * The write_configure() function writes the configuration data identified
	 * by the field string of field_length bytes length. Adaptation module must direct
	 * the action to some persistent store.
	 * @see abs_eap_base_type_c::write_configure().
	 */
	virtual eap_status_e write_configure(
		const eap_configuration_field_c * const field,
		eap_variable_data_c * const data) = 0;

	/**
	 * This function tells lower layer to remove EAP session object asyncronously.
	 * @param eap_type is pointer to selector that identifies the removed EAP session.
	 */
	virtual eap_status_e asynchronous_init_remove_eap_session(
		const eap_am_network_id_c * const send_network_id) = 0;

	/**
	 * The set_timer() function initializes timer to be elapsed after time_ms milliseconds.
	 * @param initializer is pointer to object which timer_expired() function will
	 * be called after timer elapses.
	 * @param id is identifier which will be returned in timer_expired() function.
	 * The user selects and interprets the id for this timer.
	 * @param data is pointer to any user selected data which will be returned in timer_expired() function.
	 * @param time_ms is the time of timer in milli seconds.
	 *
	 * Adaptation module internally implements the timer.
	 */
	virtual eap_status_e set_timer(
		abs_eap_base_timer_c * const initializer, 
		const u32_t id, 
		void * const data,
		const u32_t time_ms) = 0;

	/**
	 * The cancel_timer() function cancels the timer id initiated by initializer.
	 * @param initializer is pointer to object which set the cancelled timer.
	 * @param id is identifier which will be returned in timer_expired() function.
	 * The user selects and interprets the id for this timer.
	 *
	 * Adaptation module internally implements the timer.
	 */
	virtual eap_status_e cancel_timer(
		abs_eap_base_timer_c * const initializer, 
		const u32_t id) = 0;

	/**
	 * The cancel_all_timers() function cancels all timers.
	 * User should use this in termination of the stack before
	 * the adaptation module of tools is deleted.
	 * Preferred mode is to cancel each timer directly
	 * using cancel_timer() function.
	 *
	 * Adaptation module internally implements the timer.
	 */
	virtual eap_status_e cancel_all_timers() = 0;

	/**
	 * This function queries the validity of EAP-type.
	 * Lower layer should return eap_status_ok if this EAP-type is supported.
	 * @param eap_type is the requested EAP-type.
	 */
	virtual eap_status_e check_is_valid_eap_type(const eap_type_value_e eap_type) = 0;

	/**
	 * This function queries the list of supported EAP-types.
	 * Lower layer should return eap_status_ok if this call succeeds.
	 * @param eap_type_list will include the list of supported EAP-types. Each value in list
	 * is type of u32_t and represent one supported EAP-type. List consists of subsequent u32_t type values.
	 */
	virtual eap_status_e get_eap_type_list(
		eap_array_c<eap_type_value_e> * const eap_type_list) = 0;

	virtual eap_status_e add_rogue_ap(eap_array_c<eap_rogue_ap_entry_c> & rogue_ap_list) = 0;

	/**
	 * The set_session_timeout() function changes the session timeout timer to be elapsed after session_timeout_ms milliseconds.
	 */
	virtual eap_status_e set_session_timeout(
		const u32_t session_timeout_ms) = 0;

	//--------------------------------------------------
}; // class abs_eap_radius_session_c

#endif //#if !defined(_ABS_EAP_RADIUS_SESSION_H_)

//--------------------------------------------------



// End.
