--- a/eapol/eapol_framework/eapol_common/include/abs_eap_session_core.h Tue Aug 31 15:16:37 2010 +0300
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,253 +0,0 @@
-/*
-* Copyright (c) 2001-2006 Nokia Corporation and/or its subsidiary(-ies).
-* All rights reserved.
-* This component and the accompanying materials are made available
-* under the terms of the License "Eclipse Public License v1.0"
-* which accompanies this distribution, and is available
-* at the URL "http://www.eclipse.org/legal/epl-v10.html".
-*
-* Initial Contributors:
-* Nokia Corporation - initial contribution.
-*
-* Contributors:
-*
-* Description: EAP and WLAN authentication protocols.
-*
-*/
-
-/*
-* %version: 7 %
-*/
-
-#if !defined(_ABS_EAP_SESSION_CORE_H_)
-#define _ABS_EAP_SESSION_CORE_H_
-
-#include "eap_header.h"
-#include "eap_array.h"
-#if defined(USE_EAP_SIMPLE_CONFIG)
- #include "abs_eap_configuration_if.h"
-#endif // #if defined(USE_EAP_SIMPLE_CONFIG)
-#include "eapol_key_types.h"
-
-class eap_am_network_id_c;
-class eap_buf_chain_wr_c;
-class eap_configuration_field_c;
-class eap_variable_data_c;
-class abs_eap_base_type_c;
-class abs_eap_state_notification_c;
-class eap_base_type_c;
-class eap_rogue_ap_entry_c;
-class eap_master_session_key_c;
-
-
-/// This class defines the interface the eap_core_c class
-/// will use with the partner class (lower layer).
-class EAP_EXPORT abs_eap_session_core_c
-#if defined(USE_EAP_SIMPLE_CONFIG)
-: public abs_eap_configuration_if_c
-#endif // #if defined(USE_EAP_SIMPLE_CONFIG)
-{
-private:
- //--------------------------------------------------
-
- //--------------------------------------------------
-protected:
- //--------------------------------------------------
-
- //--------------------------------------------------
-public:
- //--------------------------------------------------
-
- /**
- * The destructor of the abs_eap_core class does nothing special.
- */
- virtual ~abs_eap_session_core_c()
- {
- }
-
- /**
- * The constructor of the abs_eap_core class does nothing special.
- */
- abs_eap_session_core_c()
- {
- }
-
- /**
- * The derived class could send packets to partner class with this function.
- * @see abs_eap_base_type_c::packet_send().
- */
- virtual eap_status_e packet_send(
- const eap_am_network_id_c * const network_id,
- eap_buf_chain_wr_c * const sent_packet,
- const u32_t header_offset,
- const u32_t data_length,
- const u32_t buffer_length) = 0;
-
- /**
- * The get_header_offset() function obtains the header offset of EAP-packet.
- * @see abs_eap_base_type_c::get_header_offset().
- */
- virtual u32_t get_header_offset(
- u32_t * const MTU,
- u32_t * const trailer_length) = 0;
-
- /**
- * The load_module() function function indicates the lower level to
- * load new module of EAP-type.
- * @param type is the requested EAP-type.
- * @param partner is pointer to the caller object.
- * The partner of the new created EAP-type object is the caller object.
- * @param eap_type is a pointer to a pointer of EAP-type object.
- * Adaptation module sets eap_type pointer to created EAP-type object.
- * @param is_client_when_true parameter indicates whether the network entity should
- * act as a client (true) or server (false), in terms of EAP-protocol whether
- * this network entity is EAP-supplicant (true) or EAP-authenticator (false).
- * @param receive_network_id includes the addresses (network identity) and packet type.
- */
- virtual eap_status_e load_module(
- const eap_type_value_e type,
- const eap_type_value_e /* tunneling_type */,
- abs_eap_base_type_c * const partner,
- eap_base_type_c ** const eap_type,
- const bool is_client_when_true,
- const eap_am_network_id_c * const receive_network_id) = 0;
-
- /**
- * The unload_module() function unloads the module of a EAP-type.
- * @param eap_type is the requested EAP-type.
- */
- virtual eap_status_e unload_module(const eap_type_value_e eap_type) = 0;
-
- /**
- * The session calls the restart_authentication() function
- * when EAP-authentication is needed with another peer.
- * This is also used when session restarts authentication.
- * @param receive_network_id includes the addresses (network identity) and packet type.
- * @param is_client_when_true indicates whether the EAP-type should act as a client or server,
- * in terms of EAP-protocol whether this network entity is EAP-supplicant (true) or EAP-authenticator (false).
- * @param force_clean_restart this selects whether the server removes this session (true) or not (false).
- * @param from_timer tells whether the timer calls this function (true) or not (false).
- */
- virtual eap_status_e restart_authentication(
- const eap_am_network_id_c * const receive_network_id,
- const bool is_client_when_true,
- const bool force_clean_restart,
- const bool from_timer = false) = 0;
-
- /**
- * Note this function is just an example. Parameters will change later.
- * The packet_data_crypto_keys() function gives the generated keys to lower level.
- * After EAP-authentication has generated the keys it calls this function
- * to offer the keys to lower level.
- * @see abs_eap_base_type_c::packet_data_crypto_keys().
- */
- virtual eap_status_e packet_data_crypto_keys(
- const eap_am_network_id_c * const send_network_id,
- const eap_master_session_key_c * const master_session_key
- ) = 0;
-
- /**
- * The read_configure() function reads the configuration data identified
- * by the field string of field_length bytes length. Adaptation module must direct
- * the query to some persistent store.
- * @see abs_eap_base_type_c::read_configure().
- */
- virtual eap_status_e read_configure(
- const eap_configuration_field_c * const field,
- eap_variable_data_c * const data) = 0;
-
- /**
- * The write_configure() function writes the configuration data identified
- * by the field string of field_length bytes length. Adaptation module must direct
- * the action to some persistent store.
- * @see abs_eap_base_type_c::write_configure().
- */
- virtual eap_status_e write_configure(
- const eap_configuration_field_c * const field,
- eap_variable_data_c * const data) = 0;
-
- /**
- * This is notification of internal state transition.
- * This is used for notifications, debugging and protocol testing.
- * The primal notifications are eap_state_variable_e::eap_state_authentication_finished_successfully
- * and eap_state_variable_e::eap_state_authentication_terminated_unsuccessfully.
- * These two notifications are sent from EAP-protocol layer (eap_protocol_layer_e::eap_protocol_layer_eap).
- * These two notifications tells the end state of authentication session. These are the only
- * reliable indications of the final status of authentication session.
- * You MUST NOT make decision based on the return value of abs_eap_stack_interface_c::packet_process().
- */
- virtual void state_notification(
- const abs_eap_state_notification_c * const state) = 0;
-
- /**
- * The set_timer() function initializes timer to be elapsed after time_ms milliseconds.
- * @param initializer is pointer to object which timer_expired() function will
- * be called after timer elapses.
- * @param id is identifier which will be returned in timer_expired() function.
- * The user selects and interprets the id for this timer.
- * @param data is pointer to any user selected data which will be returned in timer_expired() function.
- * @param time_ms is the time of timer in milli seconds.
- *
- * Adaptation module internally implements the timer.
- */
- virtual eap_status_e set_timer(
- abs_eap_base_timer_c * const initializer,
- const u32_t id,
- void * const data,
- const u32_t time_ms) = 0;
-
- /**
- * The cancel_timer() function cancels the timer id initiated by initializer.
- * @param initializer is pointer to object which set the cancelled timer.
- * @param id is identifier which will be returned in timer_expired() function.
- * The user selects and interprets the id for this timer.
- *
- * Adaptation module internally implements the timer.
- */
- virtual eap_status_e cancel_timer(
- abs_eap_base_timer_c * const initializer,
- const u32_t id) = 0;
-
- /**
- * This function queries the validity of EAP-type.
- * Lower layer should return eap_status_ok if this EAP-type is supported.
- * @param eap_type is the requested EAP-type.
- */
- virtual eap_status_e check_is_valid_eap_type(const eap_type_value_e eap_type) = 0;
-
- /**
- * This function queries the list of supported EAP-types.
- * Lower layer should return eap_status_ok if this call succeeds.
- * @param eap_type_list will include the list of supported EAP-types. Each value in list
- * is type of u32_t and represent one supported EAP-type. List consists of subsequent u32_t type values.
- */
- virtual eap_status_e get_eap_type_list(
- eap_array_c<eap_type_value_e> * const eap_type_list) = 0;
-
- virtual eap_status_e add_rogue_ap(eap_array_c<eap_rogue_ap_entry_c> & rogue_ap_list) = 0;
-
- /**
- * The set_session_timeout() function changes the session timeout timer to be elapsed after session_timeout_ms milliseconds.
- */
- virtual eap_status_e set_session_timeout(
- const u32_t session_timeout_ms) = 0;
-
- virtual eap_status_e complete_get_802_11_authentication_mode(
- const eap_status_e completion_status,
- const eap_am_network_id_c * const receive_network_id,
- const eapol_key_802_11_authentication_mode_e mode) = 0;
-
- virtual eap_status_e complete_remove_eap_session(
- const bool complete_to_lower_layer,
- const eap_am_network_id_c * const receive_network_id) = 0;
-
- //--------------------------------------------------
-}; // class abs_eap_session_core_c
-
-#endif //#if !defined(_ABS_EAP_SESSION_CORE_H_)
-
-//--------------------------------------------------
-
-
-
-// End.