/*
* Copyright (c) 2001-2006 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of the License "Eclipse Public License v1.0"
* which accompanies this distribution, and is available
* at the URL "http://www.eclipse.org/legal/epl-v10.html".
*
* Initial Contributors:
* Nokia Corporation - initial contribution.
*
* Contributors:
*
* Description:  Project definition file for project EAPOL
*
*/

/*
* %version: 48.1.25 %
*/

//-------------------------------------------------------------------

// Set up the preprocessor macros for source files

// This enables TTLS
MACRO USE_TTLS_EAP_TYPE

// This flag activates start WPXM functionaly.
MACRO USE_EAPOL_START_WPXM_REASSOCIATION

// This flag tells the 64-bit multiplication of platform can be used.
MACRO USE_EAP_64_BIT_MULTIPLICATION

// This flag activates the EAP-TTLS/MsChapv2 authentication.
// Note this is inside EAP protocol.
// We did not have any plan to make this authentication.
MACRO EAP_USE_TTLS_PLAIN_MS_CHAP_V2_HACK
#define EAP_USE_TTLS_PLAIN_MS_CHAP_V2_HACK

MACRO USE_EAP_GSMSIM_INTERFACE
// Comment the below line for Test environment. ( Eg: for Plugin Tester )
// Also use the directory wlaneapol_testing. Otherwise EAP GSM SIM won't compile.
#define USE_EAP_GSMSIM_INTERFACE

// Comment the below lines for Test environment ( Eg: for Plugin Tester in emulator or simulator tests on hardware )
// Also use the directory wlaneapol_testing. Otherwise EAP AKA won't compile.
MACRO USE_EAP_AKA_INTERFACE
#define USE_EAP_AKA_INTERFACE

// This might be useless.
//MACRO SYMBIAN_CRYPTO=1

// This is very important definition.
MACRO EAP_LITTLE_ENDIAN=1

//-------------------------------------------------------------------

// This macro activates stack trace of EAP_ASSERT().
// When assertion is false the current stack is traced before abort of program.
//MACRO USE_EAP_ASSERT_STACK_TRACE
//#define USE_EAP_ASSERT_STACK_TRACE

// This is used to enable configuring from file.
MACRO USE_EAP_FILECONFIG=1

// Add this when database compatibility is not needed anymore.
// This fixes some names of database fields.
MACRO USE_EAP_FIXED_DATABASE_FIELDS=1

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -

// This flag activates message based WLAN engine EAPOL interface.
MACRO USE_EAPOL_WLAN_AUTHENTICATION_MESSAGE_IF
#define USE_EAPOL_WLAN_AUTHENTICATION_MESSAGE_IF

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -

// This flag enables EAP Protected setup (or Simple Config or Easy Setup or EAP-WSC).
MACRO USE_EAP_SIMPLE_CONFIG=1
#define USE_EAP_SIMPLE_CONFIG

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -


#if defined(FF_WLAN_EXTENSIONS)

//#warning FF_WLAN_EXTENSIONS enabled

MACRO USE_FAST_EAP_TYPE=1
#define USE_FAST_EAP_TYPE

MACRO USE_EAP_TLS_SESSION_TICKET=1
#define USE_EAP_TLS_SESSION_TICKET

MACRO USE_EAP_TLS_IDENTITY_PRIVACY=1

MACRO USE_PAC_STORE=1
#define USE_PAC_STORE

#endif // End: #if defined(FF_WLAN_EXTENSIONS)

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -

// This macro enables some traces for release error log.
// EAP_TRACE_ALWAYS() and EAP_TRACE_DATA_ALWAYS() are left
// active if USE_EAP_TRACE_ALWAYS is defined.
//MACRO USE_EAP_TRACE_ALWAYS=1

// This very heavy trace. Do use only when other things fail.
//MACRO USE_EAP_FUNCTION_TRACE=1

// This flag activates minimum traces for release version.
// Traces will be written to log file.
//MACRO USE_EAP_MINIMUM_RELEASE_TRACES

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -

// This flag activates some interoperability PEAPv0 and PEAPv1 fixes.
MACRO USE_EAP_TLS_PEAP_TPPD_PEAP_V1_NEW_FIXES=1

// This flag activates server codes of EAP-SIM.
// Uncomment the below lines for activating the server codes ( for plugin tester).
//MACRO USE_EAP_TYPE_SERVER_GSMSIM=1

// This flag activates server codes of EAP-AKA.
// Uncomment the below lines for activating the server codes ( for plugin tester).
// MACRO USE_EAP_TYPE_SERVER_AKA
// #define USE_EAP_TYPE_SERVER_AKA

// This flag activates server codes of EAP-SECURID and GTC.
// Uncomment the below lines for activating the server codes ( for plugin tester).
//MACRO COMPILE_EAP_SECURID_SERVER=1
//MACRO EAP_SECURID_SERVER=1

// This flag activates server codes of EAPOL
MACRO USE_EAP_CORE_SERVER=1

// This is to enable password change functionality for MSCHAPv2
// MACRO EAP_MSCHAPV2_ENABLE_PASSWORD_CHANGE=1

// These following macros should be adjusted depending on the test environment.
// For WLM compatibility only NO_EAP_MUTEX should be defined.
MACRO NO_EAP_MUTEX=1

// Enables configuration option to skips user interactions in selected test cases.
MACRO USE_EAP_CONFIGURATION_TO_SKIP_USER_INTERACTIONS=1

// Enables timer to stop authentication with broken authentication server or access point configuration that blocks WLAN connection for too long time.
MACRO USE_EAP_CORE_WAIT_REQUEST_TYPE_TIMER=1

// Enables EAP-timer traces.
MACRO USE_EAP_TIMER_QUEUE_TRACE=1

// - - - - - - - - - - - - - - - - - - - - - - - - - - - -

#if defined(FF_WLAN_EXTENSIONS)
	#define USE_EAPOL_WLAN_WPX
	// This activates WPXM.
	// You need all EAPOL WPX sources or binary eapolwpx.lib to compile WPX version.
	MACRO EAP_USE_WPXM=1
	#define EAP_USE_WPXM

	MACRO USE_EAP_PAC_STORE_IF=1
	#define USE_EAP_PAC_STORE_IF
#else
	// The WPX stub is needed even without WPX functionality.
	#define USE_EAPOL_WLAN_WPX_STUB 
#endif // #if defined(FF_WLAN_EXTENSIONS)

// Removes include statements for stdint.h
MACRO EAP_NO_STDINT_H_HEADER=1
#define EAP_NO_STDINT_H_HEADER

// This is disabled because QT leaks memory and EAP-server panics on __UHEAP_MARKEND always.
// Define this after QT fixes memory leaks.
//MACRO USE_EAP_HEAP_CHECK=1

//-------------------------------------------------------------------
// End of File