//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

LOAD_SUITE TzLocalTestserver

//

// Backup the existing TZ Server CenRep repository.  It will be modified in the

// following APPSERV-TZLOCAL-CR1606-CIT-xx test cases.

//

RUN_UTILS MkDir c:\test\tzloc\tzlocinteg\tmp

RUN_UTILS CopyFile c:\private\10202be9\persists\1020383e.cre c:\test\tzloc\tzlocinteg\tmp\1020383e.cre

//

// @SYMTestCaseID PIM-APPSERV-TZLOCAL-CR1606-CIT-0001

//		

//

// @SYMTestCaseDesc

//		The purpose of this test is to verify the behaviour of the TZ

//		Localization component when the Default Home Time Zone key is not

//		present in the TZ Server component's CenRep repository.  In this case,

//		the existing source for the Default Home Time Zone should be used viz

//		the timezones.rss file.

//

// @SYMTestActions

//		1.  Delete any existing TZ Localization database.  This will force the

//			database to be recreated when a CTzLocalizer object is created,

//			simulating first-boot behaviour.

//		2.  Copy a TZ Server CenRep repository which does not contain the

//			Default Home Time Zone key to the TZ Server private data cage.

//		3.  Compare the time zone information for the Home zone frequently used

//			zone with the expected time zone information.

//

// @SYMTestExpectedResults

//		The time zone information for the Home zone frequently used zone

//		corresponds to the time zone information identified by the Default Home

//		Time Zone in the timezone.rss file.

//

// @SYMREQ

//		REQ11285

//		

// @SYMTestType

//		CIT

//

// @SYMTestPriority

//		1

//

START_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0001

RUN_UTILS DeleteFile c:\private\100012a5\DBS_10206a8b_TZLOCALIZATION.DB

RUN_UTILS CopyFile c:\test\tzloc\tzlocinteg\1020383e_defhometzkeynotpresent.cre c:\private\10202be9\persists\1020383e.cre

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefHomeTzKeyNotPresentOrSet

END_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0001

//

// @SYMTestCaseID PIM-APPSERV-TZLOCAL-CR1606-CIT-0002

//		

//

// @SYMTestCaseDesc

//		The purpose of this test is to verify the behaviour of the TZ

//		Localization component when the Default Home Time Zone key is present

//      but not set in the TZ Server component's CenRep repository.  In this

//		case, the existing source for the Default Home Time Zone should be used

//		viz	the timezones.rss file.

//

// @SYMTestActions

//		1.  Delete any existing TZ Localization database.  This will force the

//			database to be recreated when a CTzLocalizer object is created,

//			simulating first-boot behaviour.

//		2.  Copy a TZ Server CenRep repository which does contain the Default

//			Home Time Zone key but is not set to the TZ Server private data

//			cage.

//		3.  Compare the time zone information for the Home zone frequently used

//			zone with the expected time zone information.

//

// @SYMTestExpectedResults

//		The time zone information for the Home zone frequently used zone

//		corresponds to the time zone information identified by the Default Home

//		Time Zone in the timezone.rss file.

//

// @SYMREQ

//		REQ11285

//		

// @SYMTestType

//		CIT

//

// @SYMTestPriority

//		1

//

START_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0002

RUN_UTILS DeleteFile c:\private\100012a5\DBS_10206a8b_TZLOCALIZATION.DB

RUN_UTILS CopyFile c:\test\tzloc\tzlocinteg\1020383e_defhometzkeypresentbutnotset.cre c:\private\10202be9\persists\1020383e.cre

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefHomeTzKeyNotPresentOrSet

END_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0002

//

// @SYMTestCaseID PIM-APPSERV-TZLOCAL-CR1606-CIT-0003

//		

//

// @SYMTestCaseDesc

//		The purpose of this test is to verify the behaviour of the TZ

//		Localization component when the Default Home Time Zone key is present

//      and set to the TZ identifier for Paris in the TZ Server component's

//		CenRep repository.

//

// @SYMTestActions

//		1.  Delete any existing TZ Localization database.  This will force the

//			database to be recreated when a CTzLocalizer object is created,

//			simulating first-boot behaviour.

//		2.  Copy a TZ Server CenRep repository which does contain the Default

//			Home Time Zone key and is set to Paris to the TZ Server private data

//			cage.

//		3.  Compare the time zone information for the Home zone frequently used

//			zone with the expected time zone information.

//

// @SYMTestExpectedResults

//		The time zone information for the Home zone frequently used zone

//		corresponds to the time zone information identified by the Default Home

//		Time Zone key value in the TZ Server CenRep repsitory.

//

// @SYMREQ

//		REQ11285

//		

// @SYMTestType

//		CIT

//

// @SYMTestPriority

//		1

//

START_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0003

RUN_UTILS DeleteFile c:\private\100012a5\DBS_10206a8b_TZLOCALIZATION.DB

RUN_UTILS CopyFile c:\test\tzloc\tzlocinteg\1020383e_defhometzkeypresentandsettoparis.cre c:\private\10202be9\persists\1020383e.cre

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefHomeTzKeyPresentAndSetToParis

END_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0003

//

// @SYMTestCaseID PIM-APPSERV-TZLOCAL-CR1606-CIT-0004

//		

//

// @SYMTestCaseDesc

//		The purpose of this test is to verify the behaviour of the TZ

//		Localization component when the Default Interest/Recent1/Recent2 Time

//		Zone keys are present and set to the TZ identifier for Berlin/Los

//		Angeles/Lisbon in the TZ Server component's CenRep repository.

//

// @SYMTestActions

//		1.  Delete any existing TZ Localization database.  This will force the

//			database to be recreated when a CTzLocalizer object is created,

//			simulating first-boot behaviour.

//		2.  Copy a TZ Server CenRep repository which contains the Default

//			Interest/Recent1/Recent2 Time Zone keys set to Berlin/Los Angelese/

//			Lisbon to the TZ Server private data cage.

//		3.  Compare the time zone information for the Interest frequently

//			used zone with the expected time zone information.

//		4.  Compare the time zone information for the Recent1 frequently

//			used zone with the expected time zone information.

//		5.  Compare the time zone information for the Recent2 frequently

//			used zone with the expected time zone information.

//

// @SYMTestExpectedResults

//		The time zone information for the Interest/Recent1/Recent2 zone

//		frequently used zone corresponds to the time zone information identified

//		by the Default Interest/Recent1/Recent2 Time Zone key values in the TZ

//		Server CenRep repsitory.

//

// @SYMREQ

//		REQ11285

//		

// @SYMTestType

//		CIT

//

// @SYMTestPriority

//		1

//

START_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0004

RUN_UTILS DeleteFile c:\private\100012a5\DBS_10206a8b_TZLOCALIZATION.DB

RUN_UTILS CopyFile c:\test\tzloc\tzlocinteg\1020383e_defintrec1rec2keyspresentandset.cre c:\private\10202be9\persists\1020383e.cre

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefInterestTzKeyPresentAndSetToBerlin

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefRecent1TzKeyPresentAndSetToLosAngeles

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini CenRepDefRecent2TzKeyPresentAndSetToLisbon

END_TESTCASE PIM-APPSERV-TZLOCAL-CR1606-CIT-0004

//

// Restore the original TZ Server CenRep repository.  The test step postamble

// will have killed the Central Repository server and so the next time this

// server is started it will use the content of the original TZ Server CenRep

// repository rather than the content used in the above test cases.

//

RUN_UTILS CopyFile c:\test\tzloc\tzlocinteg\tmp\1020383e.cre c:\private\10202be9\persists\1020383e.cre

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0001

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0001

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Set the time zone to a known starting point using TZ

//! @SYMTestActions Set time zone and verify time zone

//! @SYMTestExpectedResults Time zone is correctly set

RUN_TEST_STEP 100 TzLocalTestserver TestSetTimeZoneStep         c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0001

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0002

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0002

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 001

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get time zone info from time zone id

//! @SYMTestActions Read TzId and get Tz infor from the ID and compare to ini file

//! @SYMTestExpectedResults Time zone id, Standard Tz Name, DST name, Short Tz Name, Short DST Name

RUN_TEST_STEP 100 TzLocalTestserver TestGetTzInfoFromIdStep c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0002

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0003

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0003

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 002 005 006 007 008

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get Tz info from a city object

//! @SYMTestActions Read the TzId, get the default city from TzId then get Tz info and compare to ini file

//! @SYMTestExpectedResults Time zone id, Standard Tz Name, DST name, Short Tz Name, Short DST Name

RUN_TEST_STEP 100 TzLocalTestserver TestGetTzInfoFromDefCityStep c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0003

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0004

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0004

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 003

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get a list of all time zones sorted alphabetically

//! @SYMTestActions Read the sort key, get the list of time zones and compare against ini file then repeat

//! @SYMTestExpectedResults List of time zones

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzAlphaAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzAlphaDesc

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0004

START_TESTCASE PIM-TZL-TZN-0007

//! @SYMTestCaseID PIM-TZL-TZN-0007

//! @SYMTestType CT

//! @SYMTestPriority 1

//! @SYMPREQ 1776

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc  Sorted time zone array with user defined time zone

//! @SYMTestActions Create a user defined time zone. Read the sort key, get the list of time zones sort by standard names and compare against ini file then repeat

//! @SYMTestExpectedResults List of time zones

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzAlphaAscUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzAlphaDescUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzUTCAscUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzUTCDescUser

END_TESTCASE PIM-TZL-TZN-0007

START_TESTCASE PIM-TZL-TZN-0011

//! @SYMTestCaseID PIM-TZL-TZN-0011

//! @SYMTestType CT

//! @SYMTestPriority 1

//! @SYMPREQ 1776

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Data source

//! @SYMTestActions Create a user defined time zone. Get time zone, city and city group names only in user defined database

//! @SYMTestExpectedResults Obtained time zone, city and city group names are only belong to user defined database.

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini TzUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini UserCity

RUN_TEST_STEP 100 TzLocalTestserver TestGetCityGroupInfoStep c:\tzlocaltestdata.ini CitiesGroupUser

END_TESTCASE PIM-TZL-TZN-0011

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0005

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0005

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 004

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get a list of all time zones sorted by UTC offset

//! @SYMTestActions Read the sort key, get the list of time zones and compare against ini file then repeat

//! @SYMTestExpectedResults List of time zones

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzUTCAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetAllTzStep c:\tzlocaltestdata.ini AllTzUTCDesc

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0005

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0007

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0007

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 009 010 014 015

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get a list of cities

//! @SYMTestActions Read the sort key the get cities from the TzId and default city

//! @SYMTestExpectedResults Alphabetically sorted list of cities

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep         c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaAscWithTzid

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaDescWithTzid

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaAscWithCity

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaDescWithCity

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep      c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0007

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0009

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0009

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 012 013 20 21

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get a list of all cities

//! @SYMTestActions Read sort key, get a list of sorted cities then repeat for another sort key

//! @SYMTestExpectedResults Alphabetically and UTC sorted cities

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep         c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep         c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaDesc

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini UTCSortedAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini UTCSortedDesc

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep      c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep      c:\tzlocaltestdata.ini GermanTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0009

START_TESTCASE PIM-TZL-TZN-0008

//! @SYMTestCaseID PIM-TZL-TZN-0008

//! @SYMTestType CT

//! @SYMTestPriority 1

//! @SYMPREQ 1776

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Sorted city array with user defined time zone

//! @SYMTestActions Create a user defined time zone. Read sort key, get a list of sorted cities then repeat for another sort key

//! @SYMTestExpectedResults Alphabetically and UTC sorted cities

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaAscUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini AlphaDescUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini UTCSortedAscUser

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep c:\tzlocaltestdata.ini UTCSortedDescUser

END_TESTCASE PIM-TZL-TZN-0008

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0011

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0011

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 014

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Correct and Incorrect addition of user defined cities to time zones

//! @SYMTestActions Add city, Add city again to time zone, add city to different zone then clean up

//! @SYMTestExpectedResults Cant define city again in the same zone but can in different zone

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep            c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP_RESULT 106 100 TzLocalTestserver TestAddCityStep c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep            c:\tzlocaltestdata.ini AustralianTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep         c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep         c:\tzlocaltestdata.ini AustralianTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0011

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0012

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0012

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Test language switching and use of resource files

//! @SYMTestActions Add cities, switch language, get city and time zone data, revert language

//! @SYMTestExpectedResults Localized and non-localized city and zone information

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep              c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep              c:\tzlocaltestdata.ini AmericanTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep              c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep              c:\tzlocaltestdata.ini FrenchTz

RUN_TEST_STEP 100 TzLocalTestserver TestChangeLanguageStep       c:\tzlocaltestdata.ini FrenchLanguage

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep      c:\tzlocaltestdata.ini FrenchLangAlphaAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetTzInfoFromIdStep      c:\tzlocaltestdata.ini FrenchLangUKTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep      c:\tzlocaltestdata.ini FrenchLangUTCSortedAsc

RUN_TEST_STEP 100 TzLocalTestserver TestGetSortedCitiesStep      c:\tzlocaltestdata.ini FrenchLangUTCSortedDesc

RUN_TEST_STEP 100 TzLocalTestserver TestGetTzInfoFromDefCityStep c:\tzlocaltestdata.ini FrenchLangUKTz

RUN_TEST_STEP 100 TzLocalTestserver TestChangeLanguageStep       c:\tzlocaltestdata.ini EnglishLanguage

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep           c:\tzlocaltestdata.ini FrenchTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep           c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep           c:\tzlocaltestdata.ini AmericanTz

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep           c:\tzlocaltestdata.ini GermanTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0012

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0013

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0013

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 016 017

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get city group information

//! @SYMTestActions Get all city group names then get a list of cities in a group

//! @SYMTestExpectedResults Sorted list of groups and cities within a group

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep          c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetCityGroupInfoStep c:\tzlocaltestdata.ini CitiesInUkGroup

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep       c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0013

START_TESTCASE PIM-TZL-TZN-0009

//! @SYMTestCaseID PIM-TZL-TZN-0009

//! @SYMTestType CT

//! @SYMTestPriority 1

//! @SYMPREQ 1776

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Sorted city group array with user defined time zone

//! @SYMTestActions Create a user defined time zone. Get all city group names in ascending or descending order 

//! @SYMTestExpectedResults Sorted list of groups and cities within a group

RUN_TEST_STEP 100 TzLocalTestserver TestGetCityGroupInfoStep c:\tzlocaltestdata.ini CitiesInUkGroupUser

END_TESTCASE PIM-TZL-TZN-0009

START_TESTCASE PIM-PPSERV-TZLOCAL-PREQ875-CIT-0014

//! @SYMTestCaseID PIM-PPSERV-TZLOCAL-PREQ875-CIT-0014

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get localized and non-localized info from a city group

//! @SYMTestActions Add user defined city, switch language, get list of cities in group, revert language

//! @SYMTestExpectedResults User defined city in group is non-localized, all others are localized

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep          c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestChangeLanguageStep   c:\tzlocaltestdata.ini FrenchLanguage

RUN_TEST_STEP 100 TzLocalTestserver TestGetCityGroupInfoStep c:\tzlocaltestdata.ini FrenchLangCitiesInUkGroup

RUN_TEST_STEP 100 TzLocalTestserver TestRemoveCityStep       c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestChangeLanguageStep   c:\tzlocaltestdata.ini EnglishLanguage

RUN_TEST_STEP 100 TzLocalTestserver TestGetTzInfoFromIdStep  c:\tzlocaltestdata.ini UKTz

END_TESTCASE PIM-PPSERV-TZLOCAL-PREQ875-CIT-0014

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0015

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0015

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 022 023 024 025 026 027 028

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Get access to current, home and interest zones

//! @SYMTestActions Set time zone, get cached zones, change zone, get cahed info and recent zone info

//! @SYMTestExpectedResults Returns cached zone and recent zone information

RUN_TEST_STEP 100 TzLocalTestserver TestSetTimeZoneStep                      c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep                          c:\tzlocaltestdata.ini UKTz

RUN_TEST_STEP 100 TzLocalTestserver TestSetFrequentlyUsedZoneStep            c:\tzlocaltestdata.ini UKTz1

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep                          c:\tzlocaltestdata.ini AmericanTz

RUN_TEST_STEP 100 TzLocalTestserver TestSetFrequentlyUsedZoneStep            c:\tzlocaltestdata.ini AmericanTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini UKTz1

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini AmericanTz

RUN_TEST_STEP 100 TzLocalTestserver TestSetTimeZoneStep                      c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestAddCityStep                          c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestSetFrequentlyUsedZoneStep            c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini UKTz1

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini AmericanTz

// The following step should be used when the tz is changed by the tz component

// RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep       c:\tzlocaltestdata.ini UKTz2

// The following step should be used when tz is changed by the TzLocalization

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep        c:\tzlocaltestdata.ini GermanTz2

END_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0015

START_TESTCASE PIM-APPSERV-TZLOCAL-PREQ875-CIT-0016

//! @SYMTestCaseID PIM-APPSERV-TZLOCAL-PREQ875-CIT-0016

//! @SYMTestType CIT

//! @SYMTestPriority High

//! @SYMPREQ 875

//! @SYMFssID 022 023 024 026 027 028

//! @SYMTestStatus Implemented

//! @SYMTestCaseDesc Ensure that cached zones can be changed and recent zones updated correctly

//! @SYMTestActions Set home cached zone, get current zone info, get home and interest zone info and recent zones

//! @SYMTestExpectedResults New cached zones are set, recent zones are updated

RUN_TEST_STEP 100 TzLocalTestserver TestSetFrequentlyUsedZoneStep     c:\tzlocaltestdata.ini AmericanTz1

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini GermanTz

RUN_TEST_STEP 100 TzLocalTestserver TestGetFrequentlyUsedZoneInfoStep c:\tzlocaltestdata.ini AmericanTz1