Version 200

===========

Made by Davidk, 12 October 1999

Added functionality for resizing rows and columns from the keyboard, and added

testcode to tgrid0 for this (press Ctrl+Shift+R). Made slight changes to 

TGrid0 and TCogrid to get them working again.

Slightly modified pointer resizing behaviour, so that the resizing lines do not 

draw over the border of the grid anymore.

Essentially 119 re-released onto the mainline share for version 6 development.

Version 119-WITHDARWN

===========

Made by Davidk, 11 October 1999

Added functionality for resizing rows and columns from the keyboard, and added

testcode to tgrid0 for this (press Ctrl+Shift+R). Made slight changes to 

TGrid0 and TCogrid to get them working again.

Slightly modified pointer resizing behaviour, so that the resizing lines do not 

draw over the border of the grid anymore.

Version 117

===========

made by Rob Gregson, 20th May 1999

 Release for automatic build proces

 UNICODE only

Version 114

===========

(made by DanH, 3/6/98)

GRID uses E32TOOLS 092,E32TOOLP 091,EIKTOOLS 123,E32 125,E32UTILS 019,F32 095,STORE 047,

GDI 059,FNTSTORE 047,FBS 077,BITGDI 065,WSERV 097,BAFL 078

Testcode also uses CONE 145

MARM DEBUG and MARM UNICODE DEBUG variants are binary incompatible for debug/release interoperability. All other variants are binary compatible from 103 onwards.

Passes MNT VALID

Variant released

WINS DEBUG      

WINS RELEASE    

WINS UNICODE DEBUG      

WINS UNICODE RELEASE    

WINC DEBUG      

WINC RELEASE    

WINC UNICODE DEBUG      

WINC UNICODE RELEASE    

MARM DEBUG      

MARM RELEASE

MARM UNICODE DEBUG      

MARM UNICODE RELEASE

No code changes.

1) Moved up to CONE 145 + dependencies to facilitate a compatible REL/DEB release.

2) Converted to using makmake, creating the conventional BWINS/BMARM directories. Created the new EBLD.BAT batch file, following CONE's footsteps as much as possible. Some modifications were needed to support the WINC builds.

PGETBLD GRID GROUP followed by EBLD BLDALL should build all 12 variants.

3) Altered base.iby as in CONE 145.

4) Added a DUMMY test project to dll_list.txt since there now seems to be a problem in the window server shell whereby trying to start the first dll in the list, emulates a machine switch off. Also added a custom system.ini which is copied to \epoc32\data when building the test code. Without this, all the test apps fail under WINS with KErrNoMemory. This problem also exists in the CONE test code.

Version 113

===========

(made by JamesD, 13/2/98)

GRID uses E32TOOLS 082,EIKTOOLS 122,E32 120,E32UTILS 019,F32 090,STORE 043,

GDI 057,FNTSTORE 046,FBS 075,BITGDI 062,WSERV 094,BAFL 075

Testcode also uses CONE 143

First Unicode release.

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINS UNICODE DEBUG      

WINS UNICODE RELEASE    

WINC DEBUG      

WINC RELEASE    

WINC UNICODE DEBUG      

WINC UNICODE RELEASE    

MARM DEBUG      

MARM RELEASE

MARM UNICODE DEBUG      

MARM UNICODE RELEASE

No code changes.

Version 112

===========

(made by DanH, 25/7/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 107,E32UTILS 011,F32 074,STORE 043,

GDI 053,FNTSTORE 043,FBS 066,BITGDI 058,WSERV 085,BAFL 075

Testcode also uses CONE 138

(EPOC32 Platform 001)

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

1) Fixed CSW3-1701 - 'Embedded sheet not printed correctly'. Worked around some low level (BITGDI?) ditthering problem by printing all grid lines black instead of light gray.

2) Fixed SW1-94 - 'If you change printers while in print preview in SHEET, the print preview is formatted incorrectly'. The grid layout is now notified of printer device changes in its graphics device map.

Version 111

===========

(made by DanH, 10/7/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 107,E32UTILS 011,F32 074,STORE 043,

GDI 053,FNTSTORE 043,FBS 066,BITGDI 058,WSERV 085,BAFL 075

Testcode also uses CONE 138

(EPOC32 Platform 001)

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

1) Fixed bug CSW3-1443. Simple out by one error in the function CGridLay::PageToRange() which caused the range of page 2 to be incorrectly calculated when the total number of columns fit exactly on one page.

Version 110

===========

(made by DanH, 1/7/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 107,E32UTILS 011,F32 074,STORE 043,

GDI 053,FNTSTORE 043,FBS 066,BITGDI 058,WSERV 085,BAFL 075

Testcode also uses CONE 138

(EPOC32 Platform 001)

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

1) Fixed bug SW3-1131 'Cannot print a sheet spreadsheet (a GRID) to a fax'.

2) Fixed bug SW3-1316 'Opening/closing a gap can get in a mess when titles are on'.

Version 109

===========

(made by DanH, 27/5/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 107,E32UTILS 011,F32 074,STORE 043,

GDI 053,FNTSTORE 043,FBS 066,BITGDI 058,WSERV 085,BAFL 075

Testcode also uses CONE 138

(EPOC32 Platform 001)

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

1) Fixed bug SW3-466 whereby changing the row height/column width of grids with title lines on could leave GRID's internal reference points incorrectly set. The fix was to call CGridImg::ResetReferencePoints() in several places.

Version 108

===========

(made by DanH, 19/5/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 105,E32UTILS 011,F32 072,STORE 042,

GDI 051,FNTSTORE 042,FBS 063,BITGDI 056,WSERV 083,BAFL 075

Testcode also uses CONE 137

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

1) Allowed the following functions to be called when there is a NULL graphics device map:-

	void CGridLay::SetColumnWidthInTwipsL(TInt aCol,TInt aWidthInTwips);

	TInt CGridLay::SetColumnWidthInTwipsL(TInt aStartCol,TInt aEndCol,TInt aWidthInTwips);

	void CGridLay::SetDefaultColumnWidthInTwips(TInt aWidthInTwips);

	void CGridLay::SetRowHeightInTwipsL(TInt aRow,TInt aHeightInTwips);

	TInt CGridLay::SetRowHeightInTwipsL(TInt aStartRow,TInt aEndRow,TInt aHeightInTwips);

	void CGridLay::SetDefaultRowHeightInTwips(TInt aHeightInTwips);

This is in response to bug report SW3-470.

2) Updated test code to test the above.

Version 107

===========

(made by DanH, 14/5/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 105,E32UTILS 011,F32 072,STORE 042,

GDI 051,FNTSTORE 042,FBS 063,BITGDI 056,WSERV 083,BAFL 075

Testcode also uses CONE 137

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE    

1) Moved up to use the platform versions.

2) Added new EXPORT : void CGridPrinter::PaginateL() which should be called in order to paginate the printing CGridLay object (as oppose to calling iGridPrinter->GridLay().PaginateL()).

Any component using this should state their dependancy on this release as oppose to the first frozen grid release (103). The only known client of this function is SHEET.

3) Ensured that the default column width/row height in pixels is never zero and asserted this fact in several places. This fixes SW-5349.

4) Added the .map files to the EMARMXX.PRJ releaseables.

Version 106

===========

(made by DanH, 9/5/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 098,E32UTILS 011,F32 068,STORE 042,

GDI 047,FNTSTORE 038,FBS 054,BITGDI 053,WSERV 079,BAFL 069

Testcode also uses CONE 134

Binary compatible from 103 onwards

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE    

1) New function: inline void CGridimg::SetGridLay(CGridLay* aGridLay)

which simply does as the name implies.

2) There is now more visual feedback when dragging on rows/columns. 4 pairs of arrows should appear around the right hand side of the column (bottom side of the row) while dragging in addition to the dotted lines.

2) Its now possible to reopen zero width columns (and rows) via the pointer. If the left hand side of the closed column is clicked on, then the previous column will be altered as before. If the right hand side is clicked on though, then the closed column will be reopened. Only right pointing arrows will be visible in this case.

3) Many internal changes to support the above.

Version 105

===========

(made by DanH, 25/4/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 098,E32UTILS 011,F32 068,STORE 042,

GDI 047,FNTSTORE 038,FBS 054,BITGDI 053,WSERV 079,BAFL 069

Testcode also uses CONE 134

Binary compatible with 104

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE    

1) Fix to CGridLay::ConstructL(CGridLay* aGridLay,CGridImg* aGridImg) where GRIDS constructed for printing that weren't paginated, failed to construct an array of hard page breaks. Any subsequent pagination on this type of grid resulted in a panic.

Version 104

===========

(made by DanH, 25/4/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 098,E32UTILS 011,F32 068,STORE 042,

GDI 047,FNTSTORE 038,FBS 054,BITGDI 053,WSERV 079,BAFL 069

Testcode also uses CONE 134

Binary compatible with 103

Variant released        Size

WINS DEBUG              102,400

WINS RELEASE            40,448

WINC DEBUG              100,352

WINC RELEASE            38,912

MARM DEBUG              55,392

MARM RELEASE            51,204

1) New CGridLay function:-

inline void SetHasChanged(TBool aHasChanged);

to allow the client to override the iHasChanged flag.

2) New CGridPrinter functions:-

IMPORT_C SetPageSizeInTwipsL(const TSize& aSizeInTwips);

inline CGridLay& GridLay();

The first allows the page size of the GridLay owned by CGridPrinter to be changed during the lifetime of the CGridPrinter object. The second is a simple accessor function. Various internal changes to CGridLay were needed to support this.

3) Added 2 new values to the enum, TMoveDirectionAndAmount:-

EMoveColumnStart        and

EMoveColumnEnd

for use in CGridImg::MoveCursorL(...).

4) When printing, GRID no longer draws a black rectangle around each page if EIsPrintedGridLabels and EIsPrintedGridLines are off.

5) Added some OOM protection to GRID printing.

6) Set KSharedLibraryUid for uid[1] in ARM builds.

Version 103

===========

(made by DanH, 18/4/97)

GRID uses E32TOOLS 063,EIKTOOLS 122,E32 098,E32UTILS 011,F32 068,STORE 042,

GDI 047,FNTSTORE 038,FBS 054,BITGDI 053,WSERV 079,BAFL 069

Testcode also uses CONE 134

Variant released        Size

WINS DEBUG              101,888

WINS RELEASE            39,936

WINC DEBUG              99,840

WINC RELEASE            38,400

MARM DEBUG              54,960

MARM RELEASE            50,792

Not binary compatible with last release

Changes following binary compatibility review:-

1) Provided CGridCellRegion::NewL(const TRangeRef& aRange) and made the constructor and ConstructL private.

2) Split panic definitions off into a separate, private header, GRDPANIC.

3) Split off classes TSizeElement and CSparseMap into new, private module GRDMAP.H

4) Constructor of CGridLabelImg becomes protected.

5) As does that of CGridCellImg. Also added reserved virtual function for possible future development.

6) The overload CGridImg::CGridImg(CGridCellImg* aGridCellImg,CGridLay* aGridLay), used in GRID printing has now gone private. Another NewL(...) is provided instead.

7) CGridImg::SetGridImg(...) gains a trailing L.

8) CGridLay becomes a friend of CGridImg (the reverse is already true) and CGridImg::ConstructSelectedL() goes private.

9) Made the protected parts of CGridPrinter private. It is not intended to be derived from.

Other changes:-

10) Removed TEKGRD.* from the \tsrc directory. It was a remnant of when GRID's testcode depended on EIKON.

11) TGLAY fails under WINC REL and DEB due to a known problem in F32. This will be fixed in a forthcoming release.

Version 102

===========

(made by DanH, 14/4/97)

GRID uses E32TOOLS 060,EIKTOOLS 120,E32 097,E32UTILS 010,F32 067,STORE 041,

GDI 047,FNTSTORE 038,FBS 053,BITGDI 053,WSERV 078,BAFL 067

Testcode also uses CONE 133

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

Not binary compatible

1) Took new BAFL

2) Made CGridImg a friend of CGridLabelImg and CGridCellImg and made their virtual functions private.

3) Bug fixes for GRIDs with no rows/cols.

Version 101

===========

(made by DanH, 11/4/97)

GRID uses E32TOOLS 060,EIKTOOLS 120,E32 097,E32UTILS 010,F32 067,STORE 041,

GDI 047,FNTSTORE 038,FBS 053,BITGDI 053,WSERV 078,BAFL 065

Testcode also uses CONE 132

Variant released

WINS DEBUG      

WINS RELEASE    

WINC DEBUG      

WINC RELEASE    

MARM DEBUG      

MARM RELEASE

Not binary compatible

1) Took new components

2) Implemented freeze technology and type safe linking

3) Added CGridCellImg::IsHorizontalGridLines() and CGridCellImg::IsVerticalGridLines(), plus other getter functions for the member data of CGridCellImg and made the member data private.

4) New flag CGridLay::EIsPageBreakLinesHidden that allows page break lines to be displayed the same as normal grid lines.

5) Fixed a couple of (potential) bugs that unfortunately mean the file format has changed again.

Version 100

===========

(made by DanH, 7/4/97)

GRID uses E32TOOLS 055,EIKTOOLS 121,E32 094,E32UTILS 009,F32 063,STORE 038,

GDI 045,FNTSTORE 036,FBS 051,BITGDI 051,WSERV 074,BAFL 059

Testcode also uses CONE 131

Not remotely binary compatible with last release.

Variant released                Size of GRID.DLL

WINS DEBUG                      115,200

WINS RELEASE                    51,200

WINC DEBUG                      112,640

WINC RELEASE                    49,152

MARM DEBUG                      1,444,872

MARM RELEASE                    51,808

1) Everthing leaves. Most significantly CGridImg::Draw(...) becomes DrawL(...). This allows the EIKON layer over GRID to handle leaves during draws more elegantly using the new functionality in CEikonEnv. Other new leavers are:-

void CGridImg::ScrollL(...);

void CGridImg::ResetSelectedL();

void CGridImg::DrawCellL(...);

void CGridImg::DrawRangeL(...);

void CGridImg::DrawSelectedL();

void CGridImg::ClearTitleLineRegionL();

void CGridImg::PrintGridLinesAndCellsInRangeL(...);

void CGridImg::CheckSideLabelWidthAndScrollL();

void CGridLay::SetTitleLinesL(...);     both variants

void CGridLay::ToggleTitleLinesL();

void CGridLabelImg::DrawRowLabelL(...);         **

void CGridLabelImg::DrawColLabelL(...);         **

void CGridLabelImg::DrawTopLeftLabelL();        **

void CGridLabelImg::DrawRowCursorL(...);        **

TInt CGridCellImg::DataWidthInPixelsL(...);     **

TBool CGridCellImg::DoesCellContainDataL(...);  **

+ many other private functions

** Important - these are virtual.

2) New function: void CGridLay::SetGridTable(const MGridTable* aGridTable);

to allow clients to change the grid table during the lifetime of gridlay (or not set the table until after gridlay is constructed).

3) class TCursorMoveCallBack becomes MGridCursorMoveCallBack and its function is now called HandleCursorMoveL() (instead of operator()()) but its use within CGridImg is otherwise unchanged.

4) CGridImg no longer takes ownership of the CursorMoveCallBack so SetCursorMoveCallBack(...) becomes a simple inline function and DeleteCursorMoveCallBack() disappears altogether.

5) Hard page breaks are now persisted by CGridLay and so its file format has also changed.

Version 099

===========

(made by DanH, 3/4/97)

GRID uses E32TOOLS 055,EIKTOOLS 121,E32 094,E32UTILS 009,F32 063,STORE 038,

GDI 045,FNTSTORE 036,FBS 051,BITGDI 051,WSERV 074,BAFL 059

Testcode also uses CONE 131

Binary compatible with 098.

1) Added callbacks to the AddRangeToSelectedL(...) type functions introduced in 098.

2) Used TRegionFix instead of RRegion where possible.

Version 098

===========