diff -r 085f765766a0 -r 860cd8a5168c imservices/ossprotocoladaptation/tsrc/ossadapmt/init/TestFramework.ini --- a/imservices/ossprotocoladaptation/tsrc/ossadapmt/init/TestFramework.ini Fri May 28 18:27:27 2010 +0530 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,196 +0,0 @@ -# -# This is STIF initialization file -# Comment lines start with '#'-character. -# See STIF TestFramework users guide.doc for instructions - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Set following test engine settings: -# - Set Test Reporting mode. TestReportMode's possible values are: -# + 'Summary': Summary of the tested test cases. -# + 'Environment': Hardware and software info. -# + 'TestCases': Test case report. -# + 'FullReport': Set of all above ones. -# + Example 'TestReportMode= Summary TestCases' -# -# - CreateTestReport setting controls report creation mode -# + YES, Test report will created. -# + NO, No Test report. -# -# - File path indicates the base path of the test report. -# - File name indicates the name of the test report. -# -# - File format indicates the type of the test report. -# + TXT, Test report file will be txt type, for example 'TestReport.txt'. -# + HTML, Test report will be html type, for example 'TestReport.html'. -# -# - File output indicates output source of the test report. -# + FILE, Test report logging to file. -# + RDEBUG, Test report logging to using rdebug. -# -# - File Creation Mode indicates test report overwriting if file exist. -# + OVERWRITE, Overwrites if the Test report file exist. -# + APPEND, Continue logging after the old Test report information if -# report exist. -# - Sets a device reset module's dll name(Reboot). -# + If Nokia specific reset module is not available or it is not correct one -# StifHWResetStub module may use as a template for user specific reset -# module. -# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation -# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02 -# - -[Engine_Defaults] - -TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment', - 'TestCases' or 'FullReport' - -CreateTestReport= YES # Possible values: YES or NO - -TestReportFilePath= C:\LOGS\TestFramework\ -TestReportFileName= TestReport - -TestReportFormat= TXT # Possible values: TXT or HTML -TestReportOutput= FILE # Possible values: FILE or RDEBUG -TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND - -DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting - -DisableMeasurement= stifmeasurementdisablenone # Possible values are: - # 'stifmeasurementdisablenone', 'stifmeasurementdisableall' - # 'stifmeasurementplugin01', 'stifmeasurementplugin02', - # 'stifmeasurementplugin03', 'stifmeasurementplugin04', - # 'stifmeasurementplugin05' or 'stifbappeaprofiler' - -Timeout= 0 # Default timeout value for each test case. In milliseconds - -[End_Defaults] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - - - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Module configurations start -# Modules are added between module tags -# tags. Module name is specified after ModuleName= tag, like -# ModuleName= XXXXXXXXX -# Modules might have initialisation file, specified as -# IniFile= c:\testframework\YYYYYY -# Modules might have several configuration files, like -# TestCaseFile= c:\testframework\NormalCases.txt -# TestCaseFile= c:\testframework\SmokeCases.txt -# TestCaseFile= c:\testframework\ManualCases.txt - -# (TestCaseFile is synonym for old term ConfigFile) - -# Following case specifies demo module settings. Demo module -# does not read any settings from file, so tags -# IniFile and TestCaseFile are not used. -# In the simplest case it is enough to specify only the -# name of the test module when adding new test module - -[New_Module] -ModuleName= testscripter -TestCaseFile= C:\testframework\ossadapmt.cfg -[End_Module] - -# Load testmoduleXXX, optionally with initialization file and/or test case files -#[New_Module] -#ModuleName= testmodulexxx - -#TestModuleXXX used initialization file -#IniFile= c:\testframework\init.txt - -#TestModuleXXX used configuration file(s) -#TestCaseFile= c:\testframework\testcases1.cfg -#TestCaseFile= c:\testframework\testcases2.cfg -#TestCaseFile= c:\testframework\manualtestcases.cfg - -#[End_Module] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - - - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Set STIF logging overwrite parameters for Logger. -# Hardware and emulator environment logging path and styles can -# be configured from here to overwrite the Logger's implemented values. -# -# Settings description: -# - Indicates option for creation log directory/directories. If log directory/directories -# is/are not created by user they will make by software. -# + YES, Create log directory/directories if not allready exist. -# + NO, Log directory/directories not created. Only created one is used. -# -# - Overwrite emulator path setting. -# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined -# Logger's path 'D:\\LOGS\\Module\\' with those definition the path -# will be 'C:\LOGS\TestFramework\LOGS\Module\' -# -# - Overwrite emulator's logging format. -# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'. -# + HTML, Log file(s) will be html type(s), for example 'Module.html'. -# -# - Overwrited emulator logging output source. -# + FILE, Logging to file(s). -# + RDEBUG, Logging to using rdebug(s). -# -# - Overwrite hardware path setting (Same description as above in emulator path). -# - Overwrite hardware's logging format(Same description as above in emulator format). -# - Overwrite hardware's logging output source(Same description as above in emulator output). -# -# - File Creation Mode indicates file overwriting if file exist. -# + OVERWRITE, Overwrites if file(s) exist. -# + APPEND, Continue logging after the old logging information if file(s) exist. -# -# - Will thread id include to the log filename. -# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'. -# + NO, No thread id to log file(s), Example filename 'Module.txt'. -# -# - Will time stamps include the to log file. -# + YES, Time stamp added to each line in log file(s). Time stamp is -# for example'12.Nov.2003 115958 LOGGING INFO' -# + NO, No time stamp(s). -# -# - Will line breaks include to the log file. -# + YES, Each logging event includes line break and next log event is in own line. -# + NO, No line break(s). -# -# - Will event ranking include to the log file. -# + YES, Event ranking number added to each line in log file(s). Ranking number -# depends on environment's tics, for example(includes time stamp also) -# '012 12.Nov.2003 115958 LOGGING INFO' -# + NO, No event ranking. -# -# - Will write log file in unicode format. -# + YES, Log file will be written in unicode format -# + NO, Log will be written as normal, not unicode, file. -# - -[Logger_Defaults] - -#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#' -#NOTE: TestEngine and TestServer logging settings cannot change here - -#CreateLogDirectories= YES # Possible values: YES or NO - -#EmulatorBasePath= C:\LOGS\TestFramework\ -#EmulatorFormat= HTML # Possible values: TXT or HTML -#EmulatorOutput= FILE # Possible values: FILE or RDEBUG - -#HardwareBasePath= D:\LOGS\TestFramework\ -#HardwareFormat= HTML # Possible values: TXT or HTML -#HardwareOutput= FILE # Possible values: FILE or RDEBUG - -#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND - -#ThreadIdToLogFile= YES # Possible values: YES or NO -#WithTimeStamp= YES # Possible values: YES or NO -#WithLineBreak= YES # Possible values: YES or NO -#WithEventRanking= YES # Possible values: YES or NO - -#FileUnicode= YES # Possible values: YES or NO -#AddTestCaseTitle= YES # Possible values: YES or NO -[End_Logger_Defaults] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - -# End of file