--- a/ipcm_pub/connection_settings_api/inc/cmconnectionmethoddef.h Thu May 27 14:35:19 2010 +0300
+++ b/ipcm_pub/connection_settings_api/inc/cmconnectionmethoddef.h Thu Jun 10 16:00:16 2010 +0300
@@ -1,5 +1,5 @@
/*
-* Copyright (c) 2006 Nokia Corporation and/or its subsidiary(-ies).
+* Copyright (c) 2006-2010 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of "Eclipse Public License v1.0"
@@ -25,7 +25,7 @@
// Beginning of the CMManager enum range (internal use)
const TUint KLanBaseSpecificAttributes = 20000;
-const TUint KLanBaseIfNetworks = 20100;
+const TUint KLanBaseIfNetworks = 20100;
// End of the CMManager enum range (internal use)
const TUint KLanBaseRangeMax = 29999;
@@ -34,8 +34,8 @@
namespace CMManager
{
- //Enumeration for possible values of seamlessness field
- //in IAP Metadata table
+ //Enumeration for possible values of seamlessness field
+ //in IAP Metadata table
/** Naming method options */
enum TNamingMethod
{
@@ -44,7 +44,7 @@
ENamingNotAccept ///< Do not accept duplication. It will leave with
///< KErrArgument.
};
-
+
// Enumeration for IPv6 types
enum TIPv6Types
{
@@ -52,7 +52,7 @@
EIPv6WellKnown, ///< Well known IPv6 type
EIPv6UserDefined ///< User defined IPv6 type
};
-
+
enum TSeamlessnessValue
{
ESeamlessnessNotRoamedTo, // NOT supported
@@ -60,22 +60,22 @@
ESeamlessnessShowprogress, // Shows progress
ESeamlessnessFullySeamless // NOT supported
};
-
-
+
+
/// Unspecified IPv4 address
_LIT( KUnspecifiedIPv4, "0.0.0.0" );
-
+
/// Known IPv6 name server 1
_LIT( KKnownIp6NameServer1, "fec0:000:0000:ffff::1" );
/// Known IPv6 name server 2
_LIT( KKnownIp6NameServer2, "fec0:000:0000:ffff::2" );
-
+
/// Dynamic IPv6 address
_LIT( KDynamicIpv6Address, "0:0:0:0:0:0:0:0" );
/// Default proxy protocol name
_LIT( KDefProxyProtocolName, "http" );
-
+
/// Default proxy port number
_LIT( KDefaultProxyPortNumber, "0" );
@@ -98,26 +98,26 @@
enum TConnectionMethodCommonAttributes
{
/**
- * The following attributes can be queried via both
+ * The following attributes can be queried via both
* the manager interface's and connection method interface's ::Get functions.
*/
ECmCoverage, /**<
* Checks if there's coverage for this bearer.
* (TBool - default: none - read only)
*/
-
+
ECmDefaultPriority, /**<
- * Default global priority of the CM's bearer
+ * Default global priority of the CM's bearer
* type.
* (TUint32 - default: none - read only)
*/
-
+
ECmDestination, /**<
- * ETrue if this connection method is
+ * ETrue if this connection method is
* an embedded destination.
* (TBool - default: none - read only)
*/
-
+
ECmBearerHasUi, /**<
* Indicates whether the bearer has any UI.
* (TBool - default: none - read only)
@@ -127,9 +127,9 @@
* Returns ETrue if IPv6 is supported.
* (TBool - default: none - read only)
*/
-
+
ECmDefaultUiPriority, /**<
- * Priority of this bearer type when shown in UI for
+ * Priority of this bearer type when shown in UI for
* configuring a new IAP.
* (TUint32 - default: none - read only)
*/
@@ -140,16 +140,16 @@
* Used with Get/SetStringAttribute().
* Returns NULL if not found.
* (String - default: None )
- */
-
+ */
+
ECmCommsDBBearerType = 204, /**<
* For backward compatibility, connection method
* can return its CommsDB specific bearer type.
* (TUint32 - default: none - read only)
- * Leaves with KErrUnknown if no associated bearer
+ * Leaves with KErrUnknown if no associated bearer
* type exists in CommsDat.
*/
-
+
ECmVirtual = 206, /**<
* Is the given connection method virtual?
* (TBool - default: none - read only)
@@ -157,86 +157,86 @@
/**
* These are not bearer specific, but controling attributes.
- */
+ */
ECmInvalidAttribute = 400, /**<
- * Client application can check which attribute
+ * Client application can check which attribute
* was incorrect in UpdateL().
* (TUint32 - default: none - read only)
*/
-
+
ECmLoadResult = 402, /**<
* Result of the load process. KErrNone if there
* was no error. Otherwise a system wide
* error code.
* (TUint32 - default: KErrNone - read only)
*/
-
+
/**
* Attributes the can be queried only via
* - connection method's GetXXXAttributeL()
* - connection manager's function GetConnectionMethodInfoXXXL()
* functions
*/
- ECmBearerType = 500, /**<
- * Bearer type of the CM
+ ECmBearerType = 500, /**<
+ * Bearer type of the CM
* (TUint - default: none - read only)
*/
-
- ECmName, /**<
+
+ ECmName, /**<
* Name of the CM
* (String - default: none)
*/
-
- ECmIapId, /**<
+
+ ECmIapId, /**<
* IAP id
* (TUint32 - default: none - read only)
*/
-
+
ECmStartPage, /**<
* Start page of the connection method
* (String - default: empty string)
*/
ECmHidden, /**<
- * Connection method is hidden.
+ * Connection method is hidden.
* (not supported yet)
* (TBool - default: EFalse)
*/
ECmProtected, /**<
- * This connection method is protected.
+ * This connection method is protected.
* Modifying it needs NetworkControl capability.
* (TBool - default: EFalse)
*/
-
+
ECmNamingMethod, /**<
* See acceptable values in TNamingControl.
* (TUint32 - default: ENamingUnique)
- */
-
+ */
+
ECmSeamlessnessLevel, /**<
* Defines whether an IAP can be roamed to.
* See details in TSeamlessnessValue.
* (TUint32 - default: ESeamlessnessConfirmFirst )
*/
-
+
ECmElementID, /**<
* Element id of the connection method in IAP table.
* (TUint32 - default: none - read only)
*/
-
+
ECmNetworkId, /**<
* Network id of the connection method.
* (TUint32 - default: none - read only)
*/
-
+
ECmConnected, /**<
* Is network connection created with connection
* method?
* (TBool - default: none - read only)
*/
- ECmId, /**<
+ ECmId, /**<
* ID to uniquely identify the connection
* methods
* It is guaranteed that every connection
@@ -246,22 +246,22 @@
ECmWapId, /**
* Provided for backwards compatibility only.
- * The record ID of the connection methods'
+ * The record ID of the connection methods'
* corresponding WAP_ACCESS_POINT record, which
- * use had been deprecated as the main ID
+ * use had been deprecated as the main ID
* should now be ECmIapId, ECmElementID or ECmId.
* (TUint32 - default: none - read only)
*/
ECmIapServiceId, /**
* Provided for backwards compatibility only.
- * The record ID of the connection methods'
+ * The record ID of the connection methods'
* service record
* (TUint32 - default: none - read only)
*/
/**
- * The following attributes are stored in the connection method's
+ * The following attributes are stored in the connection method's
* meta data record.
*/
ECmMetaHighlight = 600, /**<
@@ -270,365 +270,370 @@
* method can have this flag set.
* (TBool - default: EFalse)
*/
-
+
ECmMetaHiddenAgent, /**<
* Set to hide this connection method in Agent
* dialog.
* (TBool - default: EFalse)
*/
-
+
// These attributes can be used with virtual bearer type
// connection methods.
ECmNextLayerIapId, /**<
* Returns the linked connection method's IAP id.
* (TUint32 - default: None)
*/
-
+
ECmNextLayerSNAPId, /**<
* Returns the linked connection method's SNAP id.
* (TUint32 - default: None)
*/
-
+
+ ECmMetaHotSpot, /**<
+ * Sets/Gets the information if the IAP is HotSpot IAP.
+ * (TBool - default: EFalse)
+ */
+
// Proxy attributes
ECmProxyUsageEnabled = 1000, /**<
* Set to enable/disable proxy setting
* of connection method.
- * Disabling: record is deleted from proxy
+ * Disabling: record is deleted from proxy
* when UpdateL() is called.
- * Proxy record is deleted on UpdateL()
+ * Proxy record is deleted on UpdateL()
* if ECmProxyServerName is an empty string.
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool: default: EFalse)
*/
-
+
ECmProxyServerName, /**<
* Name of the host.
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmProxyProtocolName, /**<
- * Name of the protocol for which this proxy
+ * Name of the protocol for which this proxy
* can be used.
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
- ECmProxyPortNumber, /**<
+
+ ECmProxyPortNumber, /**<
* Port number
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TUint32 - default: none)
*/
-
+
ECmProxyExceptions, /**<
- * ";" separated list of the addresses for
+ * ";" separated list of the addresses for
* which the proxy server should not be used.
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmProxyRangeMax = 1999, /**<
* Marks the end of the proxy range
*/
-
+
ECmChargeCardUsageEnabled = 2000, /**<
- * Same as in ECmProxyUsageEnabled but
- * for charge card.
+ * Same as in ECmProxyUsageEnabled but
+ * for charge card.
* (TBool - default: EFalse)
- */
-
+ */
+
ECmChargeCardAccountNumber, /**<
* Account number
* (String - default: none)
*/
-
+
ECmChargeCardPIN, /**<
* PIN number
* (String - default: none)
*/
-
+
ECmChargeCardLocalRule, /**<
- * Order of dialling account number,
+ * Order of dialling account number,
* PIN and phone number for local calls.
* (String - default: none)
*/
-
+
ECmChargeCardNatRule, /**<
- * Order of dialling account number,
- * PIN and phone number for national
+ * Order of dialling account number,
+ * PIN and phone number for national
* calls.
* (String - default: none)
*/
ECmChargeCardIntlRule, /**<
- * Order of dialling account number,
- * PIN and phone number for
+ * Order of dialling account number,
+ * PIN and phone number for
* international calls.
* (String - default: none)
*/
-
+
ECmChargeCardRangeMax = 2999, /**<
* Marks the end of the chargecard range
*/
-
+
ECmLocationUsageEnabled = 3000, /**<
- * Same as in ECmProxyUsageEnabled but
- * for location.
+ * Same as in ECmProxyUsageEnabled but
+ * for location.
* (TBool - default: EFalse)
*/
-
+
ECmLocationIntlPrefixCode, /**<
* International prefix code.
* (String - default: none)
*/
-
+
ECmLocationNatPrefixCode, /**<
* National prefix code.
* (String - default: none)
*/
-
+
ECmLocationNatCode, /**<
* National code
* (String - default: none)
*/
-
+
ECmLocationAreaCode, /**<
* Area code.
* (String - default: none)
*/
-
+
ECmLocationDialOutCode, /**<
* Number to dial for an outside line.
* (String - default: none)
*/
-
+
ECmLocationDisableCallWaitingCode, /**<
- * Code to dial to disable call waiting
+ * Code to dial to disable call waiting
* facility.
* (String - default: none)
*/
-
+
ECmLocationMobile, /**<
* Mobile phone?
* (TBool - default: none)
*/
-
+
ECmLocationUsePulseDial, /**<
* Use pulse dialling?
* (TBool - default: none)
*/
-
+
ECmLocationWaitForDialTone, /**<
* Wait for the dial tone?
* (TBool - default: none)
*/
-
+
ECmLocationPauseAfterDialOut, /**<
* Pause time after dial out.
* (TUint32 - default: none)
*/
-
+
ECmLocationRangeMax = 3999, /**<
* Marks the end of the location
* range
*/
-
+
// WAP specific attributes
ECmWapIPGatewayAddress = 4000, /**<
- * WAP Gateway address, in this case an
+ * WAP Gateway address, in this case an
* IP address.
* (String - default: none)
*/
-
+
ECmWapIPWSPOption, /**<
- * Enum value indicating whether
- * connection-oriented
+ * Enum value indicating whether
+ * connection-oriented
* or connectionless API should be used.
* See valid values in TWapWSPOption.
- * (TUint32 - default:
+ * (TUint32 - default:
* ECmWapWspOptionConnectionless)
*/
-
+
ECmWapIPSecurity, /**<
* Attempt secure WTLS connection to the gateway
* (TBool - default: EFalse)
*/
-
+
ECmWapIPProxyPort, /**<
* Proxy port number. Required for WAP2.0 only.
* (TUint32 - default: none)
*/
-
+
ECmWapIPProxyLoginName, /**<
* Proxy login name. Required for WAP2.0 only.
* (String - default: none)
*/
-
+
ECmWapIPProxyLoginPass, /**<
- * Proxy login password.
+ * Proxy login password.
* Required for WAP2.0 only.
* (String - default: none)
*/
-
+
ECmWapRangeMax = 4099, /**<
* Marks the end of the WAP specific range
*/
- /**
+ /**
* The following attributes are common for many bearer types.
* It's not sure that every IF or IP attribute is supported by
* all bearer types.
- * It's not possible to query these attributes via
+ * It's not possible to query these attributes via
* GetConnectionInfoXXX() functions.
*/
ECmCommonAttributesStart = 5000, /**<
* Marks the beginning of the common
* attributes
*/
-
+
ECmIFName, /**<
* Interface name
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIFParams, /**<
* Interface parameter string
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIFNetworks, /**<
* List of network protocols
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIFPromptForAuth, /**<
* Prompt user for authentication
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmIFAuthName, /**<
* Authentication user name used by PPP
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIFAuthPass, /**<
* Authentication password used by PPP
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIFAuthRetries, /**<
* Number of times for retrying authentication
* if it fails
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TUint32 - default: none)
*/
-
+
ECmIPNetmask = 5050, /**<
* IP net mask of interface
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPGateway, /**<
* IP address of gateway
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPAddFromServer, /**<
* Get IP address from server?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmIPAddress, /**<
* IP address of interface
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPDNSAddrFromServer, /**<
* Get DNS addresses from server?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmIPNameServer1, /**<
* IP address of primary name server
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPNameServer2, /**<
* IP address of secondary name server
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIP6DNSAddrFromServer, /**<
* Get IP6 DNS addresses from server?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmIP6NameServer1, /**<
* IP6 address of primary name server
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIP6NameServer2, /**<
* IP6 address of secondary name server
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPAddrLeaseValidFrom, /**<
* IP address valid from this time, used to
* store dynamically assigned address lease
* info
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmIPAddrLeaseValidTo, /**<
* IP address valid for use until this time,
* used to store dynamically assigned
* address lease info
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmConfigDaemonManagerName = 5100, /**<
* Name of the ECom configuration
* daemon manager component. This
@@ -636,12 +641,12 @@
* server identified in
* ECmConfigDaemonName. If
* specified, ECmConfigDaemonName
- * should also be specified.
- * It can be queried only via the
+ * should also be specified.
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmConfigDaemonName, /**<
* Name of the configuration daemon server.
* This server is used to provide further
@@ -649,65 +654,65 @@
* dynamic IP address assignment. If
* specified, ECmConfigDaemonManagerName
* should also be specified.
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (String - default: none)
*/
-
+
ECmEnableLPCExtension = 5110, /**<
* Enable LCP extensions?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmDisablePlainTextAuth, /**<
* Disable plaintext authentication?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmCommonAttributesEnd = 5999, /**<
* Marks the end of common attributes
*/
-
+
/**
- * The following methods can be queried only via
+ * The following methods can be queried only via
* connection method's GetXXXAttributeL()
*/
ECmSpecialAttributes = 6000, /**<
* Marks the beginning of special
* attributes
*/
-
+
ECmIsLinked, /**<
* Is connection method linked to any
* virtual connection method?
- * It can be queried only via the
+ * It can be queried only via the
* connection method's GetXXXAttributeL()
* (TBool - default: none)
*/
-
+
ECmSpecialAttributesEnd = 8999 /**<
* Marks the end of special attributes
*/
};
- /** WAP WSP options */
+ /** WAP WSP options */
enum TWapWSPOption
{
/**
* Indicates that connectionless APIs should be used
*/
ECmWapWspOptionConnectionless,
-
+
/**
* Indicates that connection oriented APIs should be used
*/
ECmWapWspOptionConnectionOriented
};
-
+
} // namespace CMManager
#endif // CMCONNECTIONMETHODDEF_H