locationtriggering/tsrc/lbtengine_test/CellbasedtriggerOperations/init/TestFramework.ini
#
# This is STIF initialization file
# Comment lines start with '#'-character.
# See STIF TestFramework users guide.doc for instructions
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# Set following test engine settings:
# - Set Test Reporting mode. TestReportMode's possible values are:
# + 'Summary': Summary of the tested test cases.
# + 'Environment': Hardware and software info.
# + 'TestCases': Test case report.
# + 'FullReport': Set of all above ones.
# + Example 'TestReportMode= Summary TestCases'
#
# - CreateTestReport setting controls report creation mode
# + YES, Test report will created.
# + NO, No Test report.
#
# - File path indicates the base path of the test report.
# - File name indicates the name of the test report.
#
# - File format indicates the type of the test report.
# + TXT, Test report file will be txt type, for example 'TestReport.txt'.
# + HTML, Test report will be html type, for example 'TestReport.html'.
#
# - File output indicates output source of the test report.
# + FILE, Test report logging to file.
# + RDEBUG, Test report logging to using rdebug.
#
# - File Creation Mode indicates test report overwriting if file exist.
# + OVERWRITE, Overwrites if the Test report file exist.
# + APPEND, Continue logging after the old Test report information if
# report exist.
# - Sets a device reset module's dll name(Reboot).
# + If Nokia specific reset module is not available or it is not correct one
# StifHWResetStub module may use as a template for user specific reset
# module.
# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation
# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02
#
[Engine_Defaults]
TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment',
'TestCases' or 'FullReport'
CreateTestReport= YES # Possible values: YES or NO
TestReportFilePath= C:\LOGS\TestFramework\
TestReportFileName= TestReport
TestReportFormat= TXT # Possible values: TXT or HTML
TestReportOutput= FILE # Possible values: FILE or RDEBUG
TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting
DisableMeasurement= stifmeasurementdisablenone # Possible values are:
# 'stifmeasurementdisablenone', 'stifmeasurementdisableall'
# 'stifmeasurementplugin01', 'stifmeasurementplugin02',
# 'stifmeasurementplugin03', 'stifmeasurementplugin04',
# 'stifmeasurementplugin05' or 'stifbappeaprofiler'
Timeout= 0 # Default timeout value for each test case. In milliseconds
[End_Defaults]
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# Module configurations start
# Modules are added between module tags
# tags. Module name is specified after ModuleName= tag, like
# ModuleName= XXXXXXXXX
# Modules might have initialisation file, specified as
# IniFile= c:\testframework\YYYYYY
# Modules might have several configuration files, like
# TestCaseFile= c:\testframework\NormalCases.txt
# TestCaseFile= c:\testframework\SmokeCases.txt
# TestCaseFile= c:\testframework\ManualCases.txt
# (TestCaseFile is synonym for old term ConfigFile)
# Following case specifies demo module settings. Demo module
# does not read any settings from file, so tags
# IniFile and TestCaseFile are not used.
# In the simplest case it is enough to specify only the
# name of the test module when adding new test module
[New_Module]
ModuleName= TestScripter
TestCaseFile= c:\testframework\CellbasedtriggerOperations.cfg
[End_Module]
# Load testmoduleXXX, optionally with initialization file and/or test case files
#[New_Module]
#ModuleName= testmodulexxx
#TestModuleXXX used initialization file
#IniFile= c:\testframework\init.txt
#TestModuleXXX used configuration file(s)
#TestCaseFile= c:\testframework\testcases1.cfg
#TestCaseFile= c:\testframework\testcases2.cfg
#TestCaseFile= c:\testframework\manualtestcases.cfg
#[End_Module]
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# Set STIF logging overwrite parameters for Logger.
# Hardware and emulator environment logging path and styles can
# be configured from here to overwrite the Logger's implemented values.
#
# Settings description:
# - Indicates option for creation log directory/directories. If log directory/directories
# is/are not created by user they will make by software.
# + YES, Create log directory/directories if not allready exist.
# + NO, Log directory/directories not created. Only created one is used.
#
# - Overwrite emulator path setting.
# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined
# Logger's path 'D:\\LOGS\\Module\\' with those definition the path
# will be 'C:\LOGS\TestFramework\LOGS\Module\'
#
# - Overwrite emulator's logging format.
# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'.
# + HTML, Log file(s) will be html type(s), for example 'Module.html'.
#
# - Overwrited emulator logging output source.
# + FILE, Logging to file(s).
# + RDEBUG, Logging to using rdebug(s).
#
# - Overwrite hardware path setting (Same description as above in emulator path).
# - Overwrite hardware's logging format(Same description as above in emulator format).
# - Overwrite hardware's logging output source(Same description as above in emulator output).
#
# - File Creation Mode indicates file overwriting if file exist.
# + OVERWRITE, Overwrites if file(s) exist.
# + APPEND, Continue logging after the old logging information if file(s) exist.
#
# - Will thread id include to the log filename.
# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'.
# + NO, No thread id to log file(s), Example filename 'Module.txt'.
#
# - Will time stamps include the to log file.
# + YES, Time stamp added to each line in log file(s). Time stamp is
# for example'12.Nov.2003 115958 LOGGING INFO'
# + NO, No time stamp(s).
#
# - Will line breaks include to the log file.
# + YES, Each logging event includes line break and next log event is in own line.
# + NO, No line break(s).
#
# - Will event ranking include to the log file.
# + YES, Event ranking number added to each line in log file(s). Ranking number
# depends on environment's tics, for example(includes time stamp also)
# '012 12.Nov.2003 115958 LOGGING INFO'
# + NO, No event ranking.
#
# - Will write log file in unicode format.
# + YES, Log file will be written in unicode format
# + NO, Log will be written as normal, not unicode, file.
#
[Logger_Defaults]
#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#'
#NOTE: TestEngine and TestServer logging settings cannot change here
#CreateLogDirectories= YES # Possible values: YES or NO
#EmulatorBasePath= C:\LOGS\TestFramework\
#EmulatorFormat= HTML # Possible values: TXT or HTML
#EmulatorOutput= FILE # Possible values: FILE or RDEBUG
#HardwareBasePath= D:\LOGS\TestFramework\
#HardwareFormat= HTML # Possible values: TXT or HTML
#HardwareOutput= FILE # Possible values: FILE or RDEBUG
#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND
#ThreadIdToLogFile= YES # Possible values: YES or NO
#WithTimeStamp= YES # Possible values: YES or NO
#WithLineBreak= YES # Possible values: YES or NO
#WithEventRanking= YES # Possible values: YES or NO
#FileUnicode= YES # Possible values: YES or NO
#AddTestCaseTitle= YES # Possible values: YES or NO
[End_Logger_Defaults]
# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
# End of file