/****************************************************************************

**

** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the QtDBus module of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include "qdbusabstractinterface.h"

#include "qdbusabstractinterface_p.h"

#include "qdbusargument.h"

#include "qdbuspendingcall.h"

#include "qdbusmessage_p.h"

#include "qdbusmetaobject_p.h"

#include "qdbusmetatype_p.h"

#include "qdbusutil_p.h"

#include <qdebug.h>

QT_BEGIN_NAMESPACE

static QDBusError checkIfValid(const QString &service, const QString &path,

                               const QString &interface, bool isDynamic)

{

    // We should be throwing exceptions here... oh well

    QDBusError error;

    // dynamic interfaces (QDBusInterface) can have empty interfaces, but not service and object paths

    // non-dynamic is the opposite: service and object paths can be empty, but not the interface

    if (!isDynamic) {

        // use assertion here because this should never happen, at all

        Q_ASSERT_X(!interface.isEmpty(), "QDBusAbstractInterface", "Interface name cannot be empty");

    }

    if (!QDBusUtil::checkBusName(service, isDynamic ? QDBusUtil::EmptyNotAllowed : QDBusUtil::EmptyAllowed, &error))

        return error;

    if (!QDBusUtil::checkObjectPath(path, isDynamic ? QDBusUtil::EmptyNotAllowed : QDBusUtil::EmptyAllowed, &error))

        return error;

    if (!QDBusUtil::checkInterfaceName(interface, QDBusUtil::EmptyAllowed, &error))

        return error;

    // no error

    return QDBusError();

}

QDBusAbstractInterfacePrivate::QDBusAbstractInterfacePrivate(const QString &serv,

                                                             const QString &p,

                                                             const QString &iface,

                                                             const QDBusConnection& con,

                                                             bool isDynamic)

    : connection(con), service(serv), path(p), interface(iface),

      lastError(checkIfValid(serv, p, iface, isDynamic)),

      isValid(!lastError.isValid())

{

    if (!isValid)

        return;

    if (!connection.isConnected()) {

        lastError = QDBusError(QDBusError::Disconnected,

                               QLatin1String("Not connected to D-Bus server"));

    } else if (!service.isEmpty()) {

        currentOwner = connectionPrivate()->getNameOwner(service); // verify the name owner

        if (currentOwner.isEmpty()) {

            lastError = connectionPrivate()->lastError;

        }

    }

}

bool QDBusAbstractInterfacePrivate::canMakeCalls() const

{

    // recheck only if we have a wildcard (i.e. empty) service or path

    // if any are empty, set the error message according to QDBusUtil

    if (service.isEmpty())

        return QDBusUtil::checkBusName(service, QDBusUtil::EmptyNotAllowed, &lastError);

    if (path.isEmpty())

        return QDBusUtil::checkObjectPath(path, QDBusUtil::EmptyNotAllowed, &lastError);

    return true;

}

void QDBusAbstractInterfacePrivate::property(const QMetaProperty &mp, QVariant &where) const

{

    if (!isValid || !canMakeCalls()) {   // can't make calls

        where.clear();

        return;

    }

    // is this metatype registered?

    const char *expectedSignature = "";

    if (mp.type() != 0xff) {

        expectedSignature = QDBusMetaType::typeToSignature(where.userType());

        if (expectedSignature == 0) {

            qWarning("QDBusAbstractInterface: type %s must be registered with QtDBus before it can be "

                     "used to read property %s.%s",

                     mp.typeName(), qPrintable(interface), mp.name());

            lastError = QDBusError(QDBusError::Failed,

                                   QString::fromLatin1("Unregistered type %1 cannot be handled")

                                   .arg(QLatin1String(mp.typeName())));

            where.clear();

            return;

        }

    }

    // try to read this property

    QDBusMessage msg = QDBusMessage::createMethodCall(service, path,

                                                      QLatin1String(DBUS_INTERFACE_PROPERTIES),

                                                      QLatin1String("Get"));

    QDBusMessagePrivate::setParametersValidated(msg, true);

    msg << interface << QString::fromUtf8(mp.name());

    QDBusMessage reply = connection.call(msg, QDBus::Block);

    if (reply.type() != QDBusMessage::ReplyMessage) {

        lastError = reply;

        where.clear();

        return;

    }

    if (reply.signature() != QLatin1String("v")) {

        QString errmsg = QLatin1String("Invalid signature `%1' in return from call to "

                                       DBUS_INTERFACE_PROPERTIES);

        lastError = QDBusError(QDBusError::InvalidSignature, errmsg.arg(reply.signature()));

        where.clear();

        return;

    }

    QByteArray foundSignature;

    const char *foundType = 0;

    QVariant value = qvariant_cast<QDBusVariant>(reply.arguments().at(0)).variant();

    if (value.userType() == where.userType() || mp.type() == 0xff

        || (expectedSignature[0] == 'v' && expectedSignature[1] == '\0')) {

        // simple match

        where = value;

        return;

    }

    if (value.userType() == qMetaTypeId<QDBusArgument>()) {

        QDBusArgument arg = qvariant_cast<QDBusArgument>(value);

        foundType = "user type";

        foundSignature = arg.currentSignature().toLatin1();

        if (foundSignature == expectedSignature) {

            // signatures match, we can demarshall

            QDBusMetaType::demarshall(arg, where.userType(), where.data());

            return;

        }

    } else {

        foundType = value.typeName();

        foundSignature = QDBusMetaType::typeToSignature(value.userType());

    }

    // there was an error...

    QString errmsg = QLatin1String("Unexpected `%1' (%2) when retrieving property `%3.%4' "

                                   "(expected type `%5' (%6))");

    lastError = QDBusError(QDBusError::InvalidSignature,

                           errmsg.arg(QString::fromLatin1(foundType),

                                      QString::fromLatin1(foundSignature),

                                      interface,

                                      QString::fromUtf8(mp.name()),

                                      QString::fromLatin1(mp.typeName()),

                                      QString::fromLatin1(expectedSignature)));

    where.clear();

    return;

}

bool QDBusAbstractInterfacePrivate::setProperty(const QMetaProperty &mp, const QVariant &value)

{

    if (!isValid || !canMakeCalls())    // can't make calls

        return false;

    // send the value

    QDBusMessage msg = QDBusMessage::createMethodCall(service, path,

                                                QLatin1String(DBUS_INTERFACE_PROPERTIES),

                                                QLatin1String("Set"));

    QDBusMessagePrivate::setParametersValidated(msg, true);

    msg << interface << QString::fromUtf8(mp.name()) << qVariantFromValue(QDBusVariant(value));

    QDBusMessage reply = connection.call(msg, QDBus::Block);

    if (reply.type() != QDBusMessage::ReplyMessage) {

        lastError = reply;

        return false;

    }

    return true;

}

void QDBusAbstractInterfacePrivate::_q_serviceOwnerChanged(const QString &name,

                                                           const QString &oldOwner,

                                                           const QString &newOwner)

{

    Q_UNUSED(oldOwner);

    //qDebug() << "QDBusAbstractInterfacePrivate serviceOwnerChanged" << name << oldOwner << newOwner;

    if (name == service) {

        currentOwner = newOwner;

    }

}

QDBusAbstractInterfaceBase::QDBusAbstractInterfaceBase(QDBusAbstractInterfacePrivate &d, QObject *parent)

    : QObject(d, parent)

{

}

int QDBusAbstractInterfaceBase::qt_metacall(QMetaObject::Call _c, int _id, void **_a)

{

    int saved_id = _id;

    _id = QObject::qt_metacall(_c, _id, _a);

    if (_id < 0)

        return _id;

    if (_c == QMetaObject::ReadProperty || _c == QMetaObject::WriteProperty) {

        QMetaProperty mp = metaObject()->property(saved_id);

        int &status = *reinterpret_cast<int *>(_a[2]);

        QVariant &variant = *reinterpret_cast<QVariant *>(_a[1]);

        if (_c == QMetaObject::WriteProperty) {

            status = d_func()->setProperty(mp, variant) ? 1 : 0;

        } else {

            d_func()->property(mp, variant);

            status = variant.isValid() ? 1 : 0;

        }

        _id = -1;

    }

    return _id;

}

/*!

    \class QDBusAbstractInterface

    \inmodule QtDBus

    \since 4.2

    \brief The QDBusAbstractInterface class is the base class for all D-Bus interfaces in the QtDBus binding, allowing access to remote interfaces

    Generated-code classes also derive from QDBusAbstractInterface,

    all methods described here are also valid for generated-code

    classes. In addition to those described here, generated-code

    classes provide member functions for the remote methods, which

    allow for compile-time checking of the correct parameters and

    return values, as well as property type-matching and signal

    parameter-matching.

    \sa {qdbusxml2cpp.html}{The QDBus compiler}, QDBusInterface

*/

/*!

    \internal

    This is the constructor called from QDBusInterface::QDBusInterface.

*/

QDBusAbstractInterface::QDBusAbstractInterface(QDBusAbstractInterfacePrivate &d, QObject *parent)

    : QDBusAbstractInterfaceBase(d, parent)

{

    // keep track of the service owner

    if (!d_func()->currentOwner.isEmpty())

        QObject::connect(d_func()->connectionPrivate(), SIGNAL(serviceOwnerChanged(QString,QString,QString)),

                         this, SLOT(_q_serviceOwnerChanged(QString,QString,QString)));

}

/*!

    \internal

    This is the constructor called from static classes derived from

    QDBusAbstractInterface (i.e., those generated by dbusxml2cpp).

*/

QDBusAbstractInterface::QDBusAbstractInterface(const QString &service, const QString &path,

                                               const char *interface, const QDBusConnection &con,

                                               QObject *parent)

    : QDBusAbstractInterfaceBase(*new QDBusAbstractInterfacePrivate(service, path, QString::fromLatin1(interface),

                                                 con, false), parent)

{

    // keep track of the service owner

    if (d_func()->connection.isConnected())

        QObject::connect(d_func()->connectionPrivate(), SIGNAL(serviceOwnerChanged(QString,QString,QString)),

                         this, SLOT(_q_serviceOwnerChanged(QString,QString,QString)));

}

/*!

    Releases this object's resources.

*/

QDBusAbstractInterface::~QDBusAbstractInterface()

{

}

/*!

    Returns true if this is a valid reference to a remote object. It returns false if

    there was an error during the creation of this interface (for instance, if the remote

    application does not exist).

    Note: when dealing with remote objects, it is not always possible to determine if it

    exists when creating a QDBusInterface.

*/

bool QDBusAbstractInterface::isValid() const

{

    return !d_func()->currentOwner.isEmpty();

}

/*!

    Returns the connection this interface is assocated with.

*/

QDBusConnection QDBusAbstractInterface::connection() const

{

    return d_func()->connection;

}

/*!

    Returns the name of the service this interface is associated with.

*/

QString QDBusAbstractInterface::service() const

{

    return d_func()->service;

}

/*!

    Returns the object path that this interface is associated with.

*/

QString QDBusAbstractInterface::path() const

{

    return d_func()->path;

}

/*!

    Returns the name of this interface.

*/

QString QDBusAbstractInterface::interface() const

{

    return d_func()->interface;

}

/*!

    Returns the error the last operation produced, or an invalid error if the last operation did not

    produce an error.

*/

QDBusError QDBusAbstractInterface::lastError() const

{

    return d_func()->lastError;

}

/*!

    Places a call to the remote method specified by \a method on this interface, using \a args as

    arguments. This function returns the message that was received as a reply, which can be a normal

    QDBusMessage::ReplyMessage (indicating success) or QDBusMessage::ErrorMessage (if the call

    failed). The \a mode parameter specifies how this call should be placed.

    If the call succeeds, lastError() will be cleared; otherwise, it will contain the error this

    call produced.

    Normally, you should place calls using call().

    \warning If you use \c UseEventLoop, your code must be prepared to deal with any reentrancy:

             other method calls and signals may be delivered before this function returns, as well

             as other Qt queued signals and events.

    \threadsafe

*/

QDBusMessage QDBusAbstractInterface::callWithArgumentList(QDBus::CallMode mode,

                                                          const QString& method,

                                                          const QList<QVariant>& args)

{

    Q_D(QDBusAbstractInterface);

    if (!d->isValid || !d->canMakeCalls())

        return QDBusMessage::createError(d->lastError);

    QString m = method;

    // split out the signature from the method

    int pos = method.indexOf(QLatin1Char('.'));

    if (pos != -1)

        m.truncate(pos);

    if (mode == QDBus::AutoDetect) {

        // determine if this a sync or async call

        mode = QDBus::Block;

        const QMetaObject *mo = metaObject();

        QByteArray match = m.toLatin1() + '(';

        for (int i = staticMetaObject.methodCount(); i < mo->methodCount(); ++i) {

            QMetaMethod mm = mo->method(i);

            if (QByteArray(mm.signature()).startsWith(match)) {

                // found a method with the same name as what we're looking for

                // hopefully, nobody is overloading asynchronous and synchronous methods with

                // the same name

                QList<QByteArray> tags = QByteArray(mm.tag()).split(' ');

                if (tags.contains("Q_NOREPLY"))

                    mode = QDBus::NoBlock;

                break;

            }

        }

    }

//    qDebug() << "QDBusAbstractInterface" << "Service" << service() << "Path:" << path();

    QDBusMessage msg = QDBusMessage::createMethodCall(service(), path(), interface(), m);

    QDBusMessagePrivate::setParametersValidated(msg, true);

    msg.setArguments(args);

    QDBusMessage reply = d->connection.call(msg, mode);

    d->lastError = reply;       // will clear if reply isn't an error

    // ensure that there is at least one element

    if (reply.arguments().isEmpty())

        reply << QVariant();

    return reply;

}

/*!

    \since 4.5

    Places a call to the remote method specified by \a method on this

    interface, using \a args as arguments. This function returns a

    QDBusPendingCall object that can be used to track the status of the

    reply and access its contents once it has arrived.

    Normally, you should place calls using asyncCall().

    \threadsafe

*/

QDBusPendingCall QDBusAbstractInterface::asyncCallWithArgumentList(const QString& method,

                                                                   const QList<QVariant>& args)

{

    Q_D(QDBusAbstractInterface);

    if (!d->isValid || !d->canMakeCalls())

        return QDBusPendingCall::fromError(d->lastError);

    QDBusMessage msg = QDBusMessage::createMethodCall(service(), path(), interface(), method);

    QDBusMessagePrivate::setParametersValidated(msg, true);

    msg.setArguments(args);

    return d->connection.asyncCall(msg);

}

/*!

    Places a call to the remote method specified by \a method

    on this interface, using \a args as arguments. This function

    returns immediately after queueing the call. The reply from

    the remote function is delivered to the \a returnMethod on

    object \a receiver. If an error occurs, the \a errorMethod

    on object \a receiver is called instead.

    This function returns true if the queueing succeeds. It does

    not indicate that the executed call succeeded. If it fails,

    the \a errorMethod is called. If the queueing failed, this

    function returns false and no slot will be called.

    The \a returnMethod must have as its parameters the types returned

    by the function call. Optionally, it may have a QDBusMessage

    parameter as its last or only parameter.  The \a errorMethod must

    have a QDBusError as its only parameter.

    \since 4.3

    \sa QDBusError, QDBusMessage

 */

bool QDBusAbstractInterface::callWithCallback(const QString &method,

                                              const QList<QVariant> &args,

                                              QObject *receiver,

                                              const char *returnMethod,

                                              const char *errorMethod)

{

    Q_D(QDBusAbstractInterface);

    if (!d->isValid || !d->canMakeCalls())

        return false;

    QDBusMessage msg = QDBusMessage::createMethodCall(service(),

                                                      path(),

                                                      interface(),

                                                      method);

    QDBusMessagePrivate::setParametersValidated(msg, true);

    msg.setArguments(args);

    d->lastError = 0;

    return d->connection.callWithCallback(msg,

                                          receiver,

                                          returnMethod,

                                          errorMethod);

}

/*!

    \overload

    This function is deprecated. Please use the overloaded version.

    Places a call to the remote method specified by \a method

    on this interface, using \a args as arguments. This function

    returns immediately after queueing the call. The reply from

    the remote function or any errors emitted by it are delivered

    to the \a slot slot on object \a receiver.

    This function returns true if the queueing succeeded: it does

    not indicate that the call succeeded. If it failed, the slot

    will be called with an error message. lastError() will not be

    set under those circumstances.

    \sa QDBusError, QDBusMessage

*/

bool QDBusAbstractInterface::callWithCallback(const QString &method,

                                              const QList<QVariant> &args,

                                              QObject *receiver,

                                              const char *slot)

{

    return callWithCallback(method, args, receiver, slot, 0);