/****************************************************************************

**

** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the QtXmlPatterns module of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include <QtCore/QBuffer>

#include <QtCore/QStringList>

#include <QtXmlPatterns/QXmlFormatter>

#include "qacceltreeresourceloader_p.h"

#include "qcommonvalues_p.h"

#include "qxmlresultitems.h"

#include "qxmlresultitems_p.h"

#include "qxmlserializer.h"

#include "qxpathhelper_p.h"

#include "qxmlquery.h"

#include "qxmlquery_p.h"

QT_BEGIN_NAMESPACE

/*!

  \class QXmlQuery

  \brief The QXmlQuery class performs XQueries on XML data, or on non-XML data modeled to look like XML.

  \reentrant

  \since 4.4

  \ingroup xml-tools

  The QXmlQuery class compiles and executes queries written in the

  \l {http://www.w3.org/TR/xquery/}{XQuery language}. QXmlQuery is

  typically used to query XML data, but it can also query non-XML

  data that has been modeled to look like XML.

  Using QXmlQuery to query XML data, as in the snippet below, is

  simple because it can use the built-in \l {QAbstractXmlNodeModel}

  {XML data model} as its delegate to the underlying query engine for

  traversing the data. The built-in data model is specified in \l

  {http://www.w3.org/TR/xpath-datamodel/} {XQuery 1.0 and XPath 2.0

  Data Model}.

  \snippet doc/src/snippets/code/src_xmlpatterns_api_qabstractxmlreceiver.cpp 0

  The example uses QXmlQuery to match the first paragraph of an XML

  document and then \l {QXmlSerializer} {output the result} to a

  device as XML.

  Using QXmlQuery to query \e {non-XML} data requires writing a

  subclass of QAbstractXmlNodeModel to use as a replacement for the

  built-in XML data model. The custom data model will be able to

  traverse the non-XML data as required by the QAbstractXmlNodeModel

  interface. An instance of this custom data model then becomes the

  delegate used by the query engine to traverse the non-XML data. For

  an example of how to use QXmlQuery to query non-XML data, see the

  documentation for QAbstractXmlNodeModel.

  \section1 Running XQueries

  To run a query set up with QXmlQuery, call one of the evaluation

  functions.

  \list

  \o evaluateTo(QAbstractXmlReceiver *) is called with a pointer to an

  XML \l {QAbstractXmlReceiver} {receiver}, which receives the query

  results as a sequence of callbacks. The receiver callback class is

  like the callback class used for translating the output of a SAX

  parser. QXmlSerializer, for example, is a receiver callback class

  for translating the sequence of callbacks for output as unformatted

  XML text.

  \endlist

  \list

  \o evaluateTo(QXmlResultItems *) is called with a pointer to an

  iterator for an empty sequence of query \l {QXmlResultItems} {result

  items}.  The Java-like iterator allows the query results to be

  accessed sequentially.

  \endlist

  \list

  \o evaluateTo(QStringList *) is like evaluateTo(QXmlResultItems *),

  but the query must evaluate to a sequence of strings.

  \endlist

  \section1 Running XPath Expressions

  The XPath language is a subset of the XQuery language, so

  running an XPath expression is the same as running an XQuery

  query. Pass the XPath expression to QXmlQuery using setQuery().

  \section1 Running XSLT stylesheets

  Running an XSLT stylesheet is like running an XQuery, except that

  when you construct your QXmlQuery, you must pass QXmlQuery::XSLT20

  to tell QXmlQuery to interpret whatever it gets from setQuery() as

  an XSLT stylesheet instead of as an XQuery. You must also set the

  input document by calling setFocus().

  \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 7

  \note Currently, setFocus() must be called \e before setQuery() when

  using XSLT.

  Another way to run an XSLT stylesheet is to use the \c xmlpatterns

  command line utility.

  \code

  xmlpatterns myStylesheet.xsl myInput.xml

  \endcode

  \note For the current release, XSLT support should be considered

  Stylesheet parameters are bound using bindVariable().

  \section1 Binding A Query To A Starting Node

  When a query is run on XML data, as in the snippet above, the

  \c{doc()} function returns the node in the built-in data model where

  the query evaluation will begin. But when a query is run on a custom

  node model containing non-XML data, one of the bindVariable()

  functions must be called to bind a variable name to a starting node

  in the custom model.  A $variable reference is used in the XQuery

  text to access the starting node in the custom model. It is not

  necessary to declare the variable name external in the query. See

  the example in the documentation for QAbstractXmlNodeModel.

  \section1 Reentrancy and Thread-Safety

  QXmlQuery is reentrant but not thread-safe. It is safe to use the

  QxmlQuery copy constructor to create a copy of a query and run the

  same query multiple times. Behind the scenes, QXmlQuery will reuse

  resources such as opened files and compiled queries to the extent

  possible. But it is not safe to use the same instance of QXmlQuery

  in multiple threads.

  \section1 Error Handling

  Errors can occur during query evaluation. Examples include type

  errors and file loading errors. When an error occurs:

  \list

  \o The error message is sent to the messageHandler().

  \o QXmlResultItems::hasError() will return \c{true}, or

  evaluateTo() will return \c{false};

  \o The results of the evaluation are undefined.

  \endlist

  \section1 Resource Management

  When a query runs, it parses documents, allocating internal data

  structures to hold them, and it may load other resources over the

  network. It reuses these allocated resources when possible, to

  avoid having to reload and reparse them.

  When setQuery() is called, the query text is compiled into an

  internal data structure and optimized. The optimized form can

  then be reused for multiple evaluations of the query. Since the

  compile-and-optimize process can be expensive, repeating it for

  the same query should be avoided by using a separate instance of

  QXmlQuery for each query text.

  Once a document has been parsed, its internal representation is

  maintained in the QXmlQuery instance and shared among multiple

  QXmlQuery instances.

  An instance of QCoreApplication must exist before QXmlQuery can be

  used.

  \section1 Event Handling

  When QXmlQuery accesses resources (e.g., calling \c fn:doc() to load a file,

  or accessing a device via a bound variable), the event loop is used, which

  means events will be processed. To avoid processing events when QXmlQuery

  accesses resources, create your QXmlQuery instance in a separate thread.

 */

/*!

 \enum QXmlQuery::QueryLanguage

 \since 4.5

 Specifies whether you want QXmlQuery to interpret the input to

 setQuery() as an XQuery or as an XSLT stylesheet.

 \value XQuery10 XQuery 1.0.

 \value XSLT20 XSLT 2.0

 \omitvalue XmlSchema11IdentityConstraintSelector The selector, the restricted

            XPath pattern found in W3C XML Schema 1.1 for uniqueness

            contraints. Apart from restricting the syntax, the type check stage

            for the expression assumes a sequence of nodes to be the focus.

 \omitvalue XmlSchema11IdentityConstraintField The field, the restricted

            XPath pattern found in W3C XML Schema 1.1 for uniqueness

            contraints. Apart from restricting the syntax, the type check stage

            for the expression assumes a sequence of nodes to be the focus.

 \omitvalue XPath20 Signifies XPath 2.0. Has no effect in the public API, it's

            used internally. As With XmlSchema11IdentityConstraintSelector and

            XmlSchema11IdentityConstraintField, the type check stage

            for the expression assumes a sequence of nodes to be the focus.

 \sa setQuery()

 */

// ### Qt5: Merge constructor overloads

/*!

  Constructs an invalid, empty query that cannot be used until

  setQuery() is called.

  \note This constructor must not be used if you intend to use

  this QXmlQuery to process XSL-T stylesheets. The other constructor

  must be used in that case.

 */

QXmlQuery::QXmlQuery() : d(new QXmlQueryPrivate())

{

}

/*!

  Constructs a QXmlQuery that is a copy of \a other. The new

  instance will share resources with the existing query

  to the extent possible.

 */

QXmlQuery::QXmlQuery(const QXmlQuery &other) : d(new QXmlQueryPrivate(*other.d))

{

    /* First we have invoked QXmlQueryPrivate's synthesized copy constructor.

     * Keep this section in sync with QXmlQuery::operator=(). */

    d->detach();

}

/*!

  Constructs a query that will use \a np as its name pool. The query

  cannot be evaluated until setQuery() has been called.

 */

QXmlQuery::QXmlQuery(const QXmlNamePool &np) : d(new QXmlQueryPrivate(np))

{

}

/*!

  Constructs a query that will be used to run Xqueries or XSL-T

  stylesheets, depending on the value of \a queryLanguage. It will use

  \a np as its name pool.

  \note If your QXmlQuery will process XSL-T stylesheets, this

  constructor must be used. The default constructor can only

  create instances of QXmlQuery for running XQueries.

  \note The XSL-T support in this release is considered experimental.

 \since 4.5

 \sa queryLanguage()

 */

QXmlQuery::QXmlQuery(QueryLanguage queryLanguage,

                     const QXmlNamePool &np) : d(new QXmlQueryPrivate(np))

{

    d->queryLanguage = queryLanguage;

}

/*!

  Destroys this QXmlQuery.

 */

QXmlQuery::~QXmlQuery()

{

    delete d;

}

/*!

  Assigns \a other to this QXmlQuery instance.

 */

QXmlQuery &QXmlQuery::operator=(const QXmlQuery &other)

{

    /* Keep this section in sync with QXmlQuery::QXmlQuery(const QXmlQuery &).

     */

    if(d != other.d)

    {

        *d = *other.d;

        d->detach();

    }

    return *this;

}

/*!

  Changes the \l {QAbstractMessageHandler}{message handler} for this

  QXmlQuery to \a aMessageHandler. The query sends all compile and

  runtime messages to this message handler. QXmlQuery does not take

  ownership of \a aMessageHandler.

  Normally, the default message handler is sufficient. It writes

  compile and runtime messages to \e stderr. The default message

  handler includes color codes if \e stderr can render colors.

  Note that changing the message handler after the query has been

  compiled has no effect, i.e. the query uses the same message handler

  at runtime that it uses at compile time.

  When QXmlQuery calls QAbstractMessageHandler::message(),

  the arguments are as follows:

  \table

  \header

    \o message() argument

    \o Semantics

  \row

    \o QtMsgType type

    \o Only QtWarningMsg and QtFatalMsg are used. The former

       identifies a compile or runtime warning, while the

       latter identifies a dynamic or static error.

  \row

    \o const QString & description

    \o An XHTML document which is the actual message. It is translated

       into the current language.

  \row

    \o const QUrl &identifier

    \o Identifies the error with a URI, where the fragment is

       the error code, and the rest of the URI is the error namespace.

  \row

    \o const QSourceLocation & sourceLocation

    \o Identifies where the error occurred.

  \endtable

 */

void QXmlQuery::setMessageHandler(QAbstractMessageHandler *aMessageHandler)

{

    d->messageHandler = aMessageHandler;

}

/*!

    Returns the message handler that handles compile and runtime

    messages for this QXmlQuery.

 */

QAbstractMessageHandler *QXmlQuery::messageHandler() const

{

    return d->messageHandler;

}

/*!

  Sets this QXmlQuery to an XQuery read from the \a sourceCode

  device.  The device must have been opened with at least

  QIODevice::ReadOnly.

  \a documentURI represents the query obtained from the \a sourceCode

  device. It is the base URI of the static context, as defined in the

  \l {http://www.w3.org/TR/xquery/}{XQuery language}. It is used

  internally to resolve relative URIs that appear in the query, and

  for message reporting. \a documentURI can be empty. If it is empty,

  the \l{QCoreApplication::applicationFilePath()} {application file

  path} is used. If it is not empty, it may be either relative or

  absolute. If it is relative, it is resolved itself against the

  \l {QCoreApplication::applicationFilePath()} {application file

  path} before it is used. If \a documentURI is neither a valid URI

  nor empty, the result is undefined.

  If the query contains a static error (e.g. syntax error), an error

  message is sent to the messageHandler(), and isValid() will return

  \e false.

  Variables must be bound before setQuery() is called.

  The encoding of the XQuery in \a sourceCode is detected internally

  using the rules for setting and detecting encoding of XQuery files,

  which are explained in the \l {http://www.w3.org/TR/xquery/}

  {XQuery language}.

  If \a sourceCode is \c null or not readable, or if \a documentURI is not

  a valid URI, behavior is undefined.

  \sa isValid()

 */

void QXmlQuery::setQuery(QIODevice *sourceCode, const QUrl &documentURI)

{

    if(!sourceCode)

    {

        qWarning("A null QIODevice pointer cannot be passed.");

        return;

    }

    if(!sourceCode->isReadable())

    {

        qWarning("The device must be readable.");

        return;

    }

    d->queryURI = QPatternist::XPathHelper::normalizeQueryURI(documentURI);

    d->expression(sourceCode);

}

/*!

  \overload

  The behavior and requirements of this function are the same as for

  setQuery(QIODevice*, const QUrl&), after the XQuery has been read

  from the IO device into a string. Because \a sourceCode is already

  a Unicode string, detection of its encoding is unnecessary.

*/

void QXmlQuery::setQuery(const QString &sourceCode, const QUrl &documentURI)

{

    Q_ASSERT_X(documentURI.isEmpty() || documentURI.isValid(), Q_FUNC_INFO,

               "The document URI must be valid.");

    QByteArray query(sourceCode.toUtf8());

    QBuffer buffer(&query);

    buffer.open(QIODevice::ReadOnly);

    setQuery(&buffer, documentURI);

}

/*!

  Sets this QXmlQuery to the XQuery read from the \a queryURI.  Use

  isValid() after calling this function. If an error occurred reading

  \a queryURI, e.g., the query does not exist, cannot be read, or is

  invalid, isValid() will return \e false.

  The supported URI schemes are the same as those in the XQuery

  function \c{fn:doc}, except that queryURI can be the object of

  a variable binding.

  \a baseURI is the Base URI of the static context, as defined in the

  \l {http://www.w3.org/TR/xquery/}{XQuery language}. It is used

  internally to resolve relative URIs that appear in the query, and

  for message reporting. If \a baseURI is empty, \a queryURI is used.

  Otherwise, \a baseURI is used, and it is resolved against the \l

  {QCoreApplication::applicationFilePath()} {application file path} if

  it is relative.

  If \a queryURI is empty or invalid, or if \a baseURI is invalid,

  the behavior of this function is undefined.

 */

void QXmlQuery::setQuery(const QUrl &queryURI, const QUrl &baseURI)

{

    Q_ASSERT_X(queryURI.isValid(), Q_FUNC_INFO, "The passed URI must be valid.");

    const QUrl canonicalURI(QPatternist::XPathHelper::normalizeQueryURI(queryURI));

    Q_ASSERT(canonicalURI.isValid());

    Q_ASSERT(!canonicalURI.isRelative());

    Q_ASSERT(baseURI.isValid() || baseURI.isEmpty());

    d->queryURI = QPatternist::XPathHelper::normalizeQueryURI(baseURI.isEmpty() ? queryURI : baseURI);

    QPatternist::AutoPtr<QIODevice> result;

    try

    {

        result.reset(QPatternist::AccelTreeResourceLoader::load(canonicalURI, d->m_networkAccessDelegator,

                                                                d->staticContext()));

    }

    catch(const QPatternist::Exception)

    {

        /* We do nothing, result will be 0. */

    }

    if(result)

    {

        setQuery(result.data(), d->queryURI);

        result->close();

    }

    else

        d->recompileRequired();

}

/*!

  Binds the variable \a name to the \a value so that $\a name can be

  used from within the query to refer to the \a value.

  \a name must not be \e null. \a {name}.isNull() must return false.

  If \a name has already been bound by a previous bindVariable() call,

  its previous binding will be overridden.

  If \a {value} is null so that \a {value}.isNull() returns true, and

  \a {name} already has a binding, the effect is to remove the

  existing binding for \a {name}.

  To bind a value of type QString or QUrl, wrap the value in a

  QVariant such that QXmlItem's QVariant constructor is called.

  All strings processed by the query must be valid XQuery strings,

  which means they must contain only XML 1.0 characters. However,

  this requirement is not checked. If the query processes an invalid

  string, the behavior is undefined.

  \sa QVariant::isValid(), {QtXDM}{How QVariant maps to XQuery's Data Model},

   QXmlItem::isNull()

 */

void QXmlQuery::bindVariable(const QXmlName &name, const QXmlItem &value)