--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/bin/createpackage.pl Mon Jan 11 14:00:40 2010 +0000
@@ -0,0 +1,273 @@
+#!/usr/bin/perl
+#############################################################################
+##
+## Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+## All rights reserved.
+## Contact: Nokia Corporation (qt-info@nokia.com)
+##
+## This file is part of the S60 port of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL$
+## No Commercial Usage
+## This file contains pre-release code and may not be distributed.
+## You may use this file in accordance with the terms and conditions
+## contained in the Technology Preview License Agreement accompanying
+## this package.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 as published by the Free Software
+## Foundation and appearing in the file LICENSE.LGPL included in the
+## packaging of this file. Please review the following information to
+## ensure the GNU Lesser General Public License version 2.1 requirements
+## will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## In addition, as a special exception, Nokia gives you certain additional
+## rights. These rights are described in the Nokia Qt LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## If you have questions regarding the use of this file, please contact
+## Nokia at qt-info@nokia.com.
+##
+##
+##
+##
+##
+##
+##
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+############################################################################################
+#
+# Convenience script for creating signed packages you can install on your phone.
+#
+############################################################################################
+
+use strict;
+
+# use a command-line parsing module
+use Getopt::Long;
+# Use file name parsing module
+use File::Basename;
+# Use File::Spec services mainly rel2abs
+use File::Spec;
+# use CWD abs_bath, which is exported only on request
+use Cwd 'abs_path';
+
+
+sub Usage() {
+ print <<ENDUSAGESTRING;
+
+==============================================================================================
+Convenience script for creating signed packages you can install on your phone.
+
+Usage: createpackage.pl [options] templatepkg target-platform [certificate key [passphrase]]
+
+Where supported optiobns are as follows:
+ [-i|install] = Install the package right away using PC suite
+ [-p|preprocess] = Only preprocess the template .pkg file.
+ [-c|certfile=<file>] = The file containing certificate information for signing.
+ The file can have several certificates, each specified in
+ separate line. The certificate, key and passphrase in line
+ must be ';' separated. Lines starting with '#' are treated
+ as a comments. Also empty lines are ignored. The paths in
+ <file> can be absolute or relative to <file>.
+Where parameters are as follows:
+ templatepkg = Name of .pkg file template
+ target = Either debug or release
+ platform = One of the supported platform
+ winscw | gcce | armv5 | armv6 | armv7
+ certificate = The certificate file used for signing
+ key = The certificate's private key file
+ passphrase = The certificate's private key file's passphrase
+
+Example:
+ createpackage.pl fluidlauncher_template.pkg release-armv5
+
+Example with certfile:
+ createpackage.pl -c=mycerts.txt fluidlauncher_template.pkg release-armv5
+
+ Content of 'mycerts.txt' must be something like this:
+ # This is comment line, also the empty lines are ignored
+ rd.cer;rd-key.pem
+ .\\cert\\mycert.cer;.\\cert\\mykey.key;yourpassword
+ X:\\QtS60\\selfsigned.cer;X:\\QtS60\\selfsigned.key
+
+If no certificate and key files are provided, either a RnD certificate or
+a self-signed certificate from Qt installation root directory is used.
+==============================================================================================
+
+ENDUSAGESTRING
+
+ exit();
+}
+
+# Read given options
+my $install = "";
+my $preprocessonly = "";
+my $certfile = "";
+
+unless (GetOptions('i|install' => \$install, 'p|preprocess' => \$preprocessonly, 'c|certfile=s' => \$certfile)){
+ Usage();
+}
+
+my $certfilepath = abs_path(dirname($certfile));
+
+# Read params to variables
+my $templatepkg = $ARGV[0];
+my $targetplatform = lc $ARGV[1];
+
+my @tmpvalues = split('-', $targetplatform);
+my $target = $tmpvalues[0];
+my $platform = $tmpvalues[1];;
+
+# Convert visual target to real target (debug->udeb and release->urel)
+$target =~ s/debug/udeb/i;
+$target =~ s/release/urel/i;
+
+my $certificate = $ARGV[2];
+my $key = $ARGV[3];
+my $passphrase = $ARGV[4];
+
+# Generate output pkg basename (i.e. file name without extension)
+my $pkgoutputbasename = $templatepkg;
+$pkgoutputbasename =~ s/_template\.pkg/_$targetplatform/g;
+$pkgoutputbasename = lc($pkgoutputbasename);
+
+# Store output file names to variables
+my $pkgoutput = lc($pkgoutputbasename.".pkg");
+my $unsigned_sis_name = $pkgoutputbasename."_unsigned.sis";
+my $signed_sis_name = $pkgoutputbasename.".sis";
+
+# Store some utility variables
+my $scriptpath = dirname(__FILE__);
+my $certtext = $certificate;
+my $certpath = $scriptpath;
+$certpath =~ s-^(.*[^\\])$-$1\\-o; # ensure path ends with a backslash
+$certpath =~ s-/-\\-go; # for those working with UNIX shells
+$certpath =~ s-bin\\$-src\\s60installs\\-; # certificates are one step up in hierarcy
+
+# Check some pre-conditions and print error messages if needed
+unless (length($templatepkg) && length($platform) && length($target)) {
+ print "\nError: Template PKG filename, platform or target is not defined!\n";
+ Usage();
+}
+
+# Check template exist
+stat($templatepkg);
+unless( -e _ ) {
+ print "\nError: Package description file '$templatepkg' does not exist!\n";
+ Usage();
+}
+
+# Check certifcate preconditions and set default certificate variables if needed
+if (length($certificate)) {
+ unless(length($key)) {
+ print "\nError: Custom certificate key file parameter missing.!\n";
+ Usage();
+ }
+} else {
+ #If no certificate is given, check default options
+ $certtext = "RnD";
+ $certificate = $certpath."rd.cer";
+ $key = $certpath."rd-key.pem";
+
+ stat($certificate);
+ unless( -e _ ) {
+ $certtext = "Self Signed";
+ $certificate = $certpath."selfsigned.cer";
+ $key = $certpath."selfsigned.key";
+ }
+}
+
+# Read the certificates from file to two dimensional array
+my @certificates;
+if (length($certfile)) {
+ open CERTFILE, "<$certfile" or die $!;
+ while(<CERTFILE>){
+ s/#.*//; # ignore comments by erasing them
+ next if /^(\s)*$/; # skip blank lines
+ chomp; # remove trailing newline characters
+ my @certinfo = split(';', $_); # split row to certinfo
+
+ # Trim spaces
+ for(@certinfo) {
+ s/^\s+//;
+ s/\s+$//;
+ }
+
+ # Do some validation
+ unless(scalar(@certinfo) >= 2 && scalar(@certinfo) <= 3 && length($certinfo[0]) && length($certinfo[1]) ) {
+ print "\nError: $certfile line '$_' does not contain valid information!\n";
+ Usage();
+ }
+
+ push @certificates, [@certinfo]; # push data to two dimensional array
+ }
+}
+
+# Remove any existing .sis packages
+unlink $unsigned_sis_name;
+unlink $signed_sis_name;
+unlink $pkgoutput;
+
+# Preprocess PKG
+local $/;
+# read template file
+open( TEMPLATE, $templatepkg) or die "Error '$templatepkg': $!\n";
+$_=<TEMPLATE>;
+close (TEMPLATE);
+
+# replace the PKG variables
+s/\$\(PLATFORM\)/$platform/gm;
+s/\$\(TARGET\)/$target/gm;
+
+#write the output
+open( OUTPUT, ">$pkgoutput" ) or die "Error '$pkgoutput' $!\n";
+print OUTPUT $_;
+close OUTPUT;
+
+if ($preprocessonly) {
+ exit;
+}
+
+# Create SIS.
+system ("makesis $pkgoutput $unsigned_sis_name");
+
+# Sign SIS with certificate info given as an argument.
+system ("signsis $unsigned_sis_name $signed_sis_name $certificate $key $passphrase");
+
+# Check if creating signed SIS Succeeded
+stat($signed_sis_name);
+if( -e _ ) {
+ print ("\nSuccessfully created $signed_sis_name using certificate: $certtext!\n");
+
+ # Sign with additional certificates & keys
+ for my $row ( @certificates ) {
+ # Get certificate absolute file names, relative paths are relative to certfilepath
+ my $abscert = File::Spec->rel2abs( $row->[0], $certfilepath);
+ my $abskey = File::Spec->rel2abs( $row->[1], $certfilepath);
+
+ system ("signsis $signed_sis_name $signed_sis_name $abscert $abskey $row->[2]");
+ print ("\tAdditionally signed the SIS with certificate: $row->[0]!\n");
+ }
+
+ # remove temporary pkg and unsigned sis
+ unlink $pkgoutput;
+ unlink $unsigned_sis_name;
+
+ # Install the sis if requested
+ if ($install) {
+ print ("\nInstalling $signed_sis_name...\n");
+ system ("$signed_sis_name");
+ }
+} else {
+ # Lets leave the generated PKG for problem solving purposes
+ print ("\nSIS creation failed!\n");
+}
+
+
+#end of file