/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the QtGui module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include "qpen.h"
#include "qpen_p.h"
#include "qdatastream.h"
#include "qvariant.h"
#include "qbrush.h"
#include <qdebug.h>
QT_BEGIN_NAMESPACE
typedef QPenPrivate QPenData;
/*!
\class QPen
\ingroup painting
\ingroup shared
\brief The QPen class defines how a QPainter should draw lines and outlines
of shapes.
A pen has a style(), width(), brush(), capStyle() and joinStyle().
The pen style defines the line type. The brush is used to fill
strokes generated with the pen. Use the QBrush class to specify
fill styles. The cap style determines the line end caps that can
be drawn using QPainter, while the join style describes how joins
between two lines are drawn. The pen width can be specified in
both integer (width()) and floating point (widthF()) precision. A
line width of zero indicates a cosmetic pen. This means that the
pen width is always drawn one pixel wide, independent of the \l
{QPainter#Coordinate Transformations}{transformation} set on the
painter.
The various settings can easily be modified using the
corresponding setStyle(), setWidth(), setBrush(), setCapStyle()
and setJoinStyle() functions (note that the painter's pen must be
reset when altering the pen's properties).
For example:
\snippet doc/src/snippets/code/src_gui_painting_qpen.cpp 0
which is equivalent to
\snippet doc/src/snippets/code/src_gui_painting_qpen.cpp 1
The default pen is a solid black brush with 0 width, square
cap style (Qt::SquareCap), and bevel join style (Qt::BevelJoin).
In addition QPen provides the color() and setColor()
convenience functions to extract and set the color of the pen's
brush, respectively. Pens may also be compared and streamed.
For more information about painting in general, see \l{The Paint
System} documentation.
\tableofcontents
\section1 Pen Style
Qt provides several built-in styles represented by the
Qt::PenStyle enum:
\table
\row
\o \inlineimage qpen-solid.png
\o \inlineimage qpen-dash.png
\o \inlineimage qpen-dot.png
\row
\o Qt::SolidLine
\o Qt::DashLine
\o Qt::DotLine
\row
\o \inlineimage qpen-dashdot.png
\o \inlineimage qpen-dashdotdot.png
\o \inlineimage qpen-custom.png
\row
\o Qt::DashDotLine
\o Qt::DashDotDotLine
\o Qt::CustomDashLine
\endtable
Simply use the setStyle() function to convert the pen style to
either of the built-in styles, except the Qt::CustomDashLine style
which we will come back to shortly. Setting the style to Qt::NoPen
tells the painter to not draw lines or outlines. The default pen
style is Qt::SolidLine.
Since Qt 4.1 it is also possible to specify a custom dash pattern
using the setDashPattern() function which implicitly converts the
style of the pen to Qt::CustomDashLine. The pattern argument, a
QVector, must be specified as an even number of \l qreal entries
where the entries 1, 3, 5... are the dashes and 2, 4, 6... are the
spaces. For example, the custom pattern shown above is created
using the following code:
\snippet doc/src/snippets/code/src_gui_painting_qpen.cpp 2
Note that the dash pattern is specified in units of the pens
width, e.g. a dash of length 5 in width 10 is 50 pixels long.
The currently set dash pattern can be retrieved using the
dashPattern() function. Use the isSolid() function to determine
whether the pen has a solid fill, or not.
\section1 Cap Style
The cap style defines how the end points of lines are drawn using
QPainter. The cap style only apply to wide lines, i.e. when the
width is 1 or greater. The Qt::PenCapStyle enum provides the
following styles:
\table
\row
\o \inlineimage qpen-square.png
\o \inlineimage qpen-flat.png
\o \inlineimage qpen-roundcap.png
\row
\o Qt::SquareCap
\o Qt::FlatCap
\o Qt::RoundCap
\endtable
The Qt::SquareCap style is a square line end that covers the end
point and extends beyond it by half the line width. The
Qt::FlatCap style is a square line end that does not cover the end
point of the line. And the Qt::RoundCap style is a rounded line
end covering the end point.
The default is Qt::SquareCap.
Whether or not end points are drawn when the pen width is 0 or 1
depends on the cap style. Using Qt::SquareCap or Qt::RoundCap they
are drawn, using Qt::FlatCap they are not drawn.
\section1 Join Style
The join style defines how joins between two connected lines can
be drawn using QPainter. The join style only apply to wide lines,
i.e. when the width is 1 or greater. The Qt::PenJoinStyle enum
provides the following styles:
\table
\row
\o \inlineimage qpen-bevel.png
\o \inlineimage qpen-miter.png
\o \inlineimage qpen-roundjoin.png
\row
\o Qt::BevelJoin
\o Qt::MiterJoin
\o Qt::RoundJoin
\endtable
The Qt::BevelJoin style fills the triangular notch between the two
lines. The Qt::MiterJoin style extends the lines to meet at an
angle. And the Qt::RoundJoin style fills a circular arc between
the two lines.
The default is Qt::BevelJoin.
\image qpen-miterlimit.png
When the Qt::MiterJoin style is applied, it is possible to use the
setMiterLimit() function to specify how far the miter join can
extend from the join point. The miterLimit() is used to reduce
artifacts between line joins where the lines are close to
parallel.
The miterLimit() must be specified in units of the pens width,
e.g. a miter limit of 5 in width 10 is 50 pixels long. The
default miter limit is 2, i.e. twice the pen width in pixels.
\table 100%
\row
\o \inlineimage qpen-demo.png
\o \bold {\l {demos/pathstroke}{The Path Stroking Demo}}
The Path Stroking demo shows Qt's built-in dash patterns and shows
how custom patterns can be used to extend the range of available
patterns.
\endtable
\sa QPainter, QBrush, {demos/pathstroke}{Path Stroking Demo},
{Scribble Example}
*/
/*!
\internal
*/
inline QPenPrivate::QPenPrivate(const QBrush &_brush, qreal _width, Qt::PenStyle penStyle,
Qt::PenCapStyle _capStyle, Qt::PenJoinStyle _joinStyle)
: dashOffset(0), miterLimit(2),
cosmetic(false)
{
ref = 1;
width = _width;
brush = _brush;
style = penStyle;
capStyle = _capStyle;
joinStyle = _joinStyle;
}
static const Qt::PenCapStyle qpen_default_cap = Qt::SquareCap;
static const Qt::PenJoinStyle qpen_default_join = Qt::BevelJoin;
#ifndef QT_NO_THREAD
// Special deleter that only deletes if the ref-count goes to zero
template <>
class QGlobalStaticDeleter<QPenPrivate>
{
public:
QGlobalStatic<QPenPrivate> &globalStatic;
QGlobalStaticDeleter(QGlobalStatic<QPenPrivate> &_globalStatic)
: globalStatic(_globalStatic)
{ }
inline ~QGlobalStaticDeleter()
{
if (!globalStatic.pointer->ref.deref())
delete globalStatic.pointer;
globalStatic.pointer = 0;
globalStatic.destroyed = true;
}
};
#endif
Q_GLOBAL_STATIC_WITH_ARGS(QPenData, defaultPenInstance,
(Qt::black, 0, Qt::SolidLine, qpen_default_cap, qpen_default_join))
Q_GLOBAL_STATIC_WITH_ARGS(QPenData, nullPenInstance,
(Qt::black, 0, Qt::NoPen, qpen_default_cap, qpen_default_join))
/*!
Constructs a default black solid line pen with 0 width.
*/
QPen::QPen()
{
d = defaultPenInstance();
d->ref.ref();
}
/*!
Constructs a black pen with 0 width and the given \a style.
\sa setStyle()
*/
QPen::QPen(Qt::PenStyle style)
{
if (style == Qt::NoPen) {
d = nullPenInstance();
d->ref.ref();
} else {
d = new QPenData(Qt::black, 0, style, qpen_default_cap, qpen_default_join);
}
}
/*!
Constructs a solid line pen with 0 width and the given \a color.
\sa setBrush(), setColor()
*/
QPen::QPen(const QColor &color)
{
d = new QPenData(color, 0, Qt::SolidLine, qpen_default_cap, qpen_default_join);
}
/*!
\fn QPen::QPen(const QBrush &brush, qreal width, Qt::PenStyle style, Qt::PenCapStyle cap, Qt::PenJoinStyle join)
Constructs a pen with the specified \a brush, \a width, pen \a style,
\a cap style and \a join style.
\sa setBrush(), setWidth(), setStyle(), setCapStyle(), setJoinStyle()
*/
QPen::QPen(const QBrush &brush, qreal width, Qt::PenStyle s, Qt::PenCapStyle c, Qt::PenJoinStyle j)
{
d = new QPenData(brush, width, s, c, j);
}
/*!
\fn QPen::QPen(const QPen &pen)
Constructs a pen that is a copy of the given \a pen.
*/
QPen::QPen(const QPen &p)
{
d = p.d;
d->ref.ref();
}
/*!
Destroys the pen.
*/
QPen::~QPen()
{
if (!d->ref.deref())
delete d;
}
/*!
\fn void QPen::detach()
Detaches from shared pen data to make sure that this pen is the
only one referring the data.
If multiple pens share common data, this pen dereferences the data
and gets a copy of the data. Nothing is done if there is just a
single reference.
*/
void QPen::detach()
{
if (d->ref == 1)
return;
QPenData *x = new QPenData(*static_cast<QPenData *>(d));
if (!d->ref.deref())
delete d;
x->ref = 1;
d = x;
}
/*!
\fn QPen &QPen::operator=(const QPen &pen)
Assigns the given \a pen to this pen and returns a reference to
this pen.
*/
QPen &QPen::operator=(const QPen &p)
{
qAtomicAssign(d, p.d);
return *this;
}
/*!
Returns the pen as a QVariant.
*/
QPen::operator QVariant() const
{
return QVariant(QVariant::Pen, this);
}
/*!
\fn Qt::PenStyle QPen::style() const
Returns the pen style.
\sa setStyle(), {QPen#Pen Style}{Pen Style}
*/
Qt::PenStyle QPen::style() const
{
return d->style;
}
/*!
\fn void QPen::setStyle(Qt::PenStyle style)
Sets the pen style to the given \a style.
See the \l Qt::PenStyle documentation for a list of the available
styles. Since Qt 4.1 it is also possible to specify a custom dash
pattern using the setDashPattern() function which implicitly
converts the style of the pen to Qt::CustomDashLine.
\note This function resets the dash offset to zero.
\sa style(), {QPen#Pen Style}{Pen Style}
*/
void QPen::setStyle(Qt::PenStyle s)
{
if (d->style == s)
return;
detach();
d->style = s;
QPenData *dd = static_cast<QPenData *>(d);
dd->dashPattern.clear();
dd->dashOffset = 0;
}
/*!
Returns the dash pattern of this pen.
\sa style(), isSolid()
*/
QVector<qreal> QPen::dashPattern() const
{
QPenData *dd = static_cast<QPenData *>(d);
if (d->style == Qt::SolidLine || d->style == Qt::NoPen) {
return QVector<qreal>();
} else if (dd->dashPattern.isEmpty()) {
const qreal space = 2;
const qreal dot = 1;
const qreal dash = 4;
switch (d->style) {
case Qt::DashLine:
dd->dashPattern << dash << space;
break;
case Qt::DotLine:
dd->dashPattern << dot << space;
break;
case Qt::DashDotLine:
dd->dashPattern << dash << space << dot << space;
break;
case Qt::DashDotDotLine:
dd->dashPattern << dash << space << dot << space << dot << space;
break;
default:
break;
}
}
return dd->dashPattern;
}
/*!
Sets the dash pattern for this pen to the given \a pattern. This
implicitly converts the style of the pen to Qt::CustomDashLine.
The pattern must be specified as an even number of positive entries
where the entries 1, 3, 5... are the dashes and 2, 4, 6... are the
spaces. For example:
\table 100%
\row
\o \inlineimage qpen-custom.png
\o
\snippet doc/src/snippets/code/src_gui_painting_qpen.cpp 3
\endtable
The dash pattern is specified in units of the pens width; e.g. a
dash of length 5 in width 10 is 50 pixels long. Note that a pen
with zero width is equivalent to a cosmetic pen with a width of 1
pixel.
Each dash is also subject to cap styles so a dash of 1 with square
cap set will extend 0.5 pixels out in each direction resulting in
a total width of 2.
Note that the default cap style is Qt::SquareCap, meaning that a
square line end covers the end point and extends beyond it by half
the line width.
\sa setStyle(), dashPattern(), setCapStyle(), setCosmetic()
*/
void QPen::setDashPattern(const QVector<qreal> &pattern)
{
if (pattern.isEmpty())
return;
detach();
QPenData *dd = static_cast<QPenData *>(d);
dd->dashPattern = pattern;
d->style = Qt::CustomDashLine;
if ((dd->dashPattern.size() % 2) == 1) {
qWarning("QPen::setDashPattern: Pattern not of even length");
dd->dashPattern << 1;
}
}
/*!
Returns the dash offset for the pen.
\sa setDashOffset()
*/
qreal QPen::dashOffset() const
{
QPenData *dd = static_cast<QPenData *>(d);
return dd->dashOffset;
}
/*!
Sets the dash offset (the starting point on the dash pattern) for this pen
to the \a offset specified. The offset is measured in terms of the units used
to specify the dash pattern.
\table
\row \o \inlineimage qpen-dashpattern.png
\o For example, a pattern where each stroke is four units long, followed by a gap
of two units, will begin with the stroke when drawn as a line.
However, if the dash offset is set to 4.0, any line drawn will begin with the gap.
Values of the offset up to 4.0 will cause part of the stroke to be drawn first,
and values of the offset between 4.0 and 6.0 will cause the line to begin with
part of the gap.
\endtable
\note This implicitly converts the style of the pen to Qt::CustomDashLine.
*/
void QPen::setDashOffset(qreal offset)
{
if (qFuzzyCompare(offset, static_cast<QPenData *>(d)->dashOffset))
return;
detach();
QPenData *dd = static_cast<QPenData *>(d);
dd->dashOffset = offset;
if (d->style != Qt::CustomDashLine) {
dd->dashPattern = dashPattern();
d->style = Qt::CustomDashLine;
}
}
/*!
Returns the miter limit of the pen. The miter limit is only
relevant when the join style is set to Qt::MiterJoin.
\sa setMiterLimit(), {QPen#Join Style}{Join Style}
*/
qreal QPen::miterLimit() const
{
const QPenData *dd = static_cast<QPenData *>(d);
return dd->miterLimit;
}
/*!
Sets the miter limit of this pen to the given \a limit.
\image qpen-miterlimit.png
The miter limit describes how far a miter join can extend from the
join point. This is used to reduce artifacts between line joins
where the lines are close to parallel.
This value does only have effect when the pen style is set to
Qt::MiterJoin. The value is specified in units of the pen's width,
e.g. a miter limit of 5 in width 10 is 50 pixels long. The default
miter limit is 2, i.e. twice the pen width in pixels.
\sa miterLimit(), setJoinStyle(), {QPen#Join Style}{Join Style}
*/
void QPen::setMiterLimit(qreal limit)
{
detach();
QPenData *dd = static_cast<QPenData *>(d);
dd->miterLimit = limit;
}
/*!
\fn qreal QPen::width() const
Returns the pen width with integer precision.
\sa setWidth(), widthF()
*/
int QPen::width() const
{
return qRound(d->width);
}
/*!
\fn qreal QPen::widthF() const
Returns the pen width with floating point precision.
\sa setWidthF() width()
*/
qreal QPen::widthF() const
{
return d->width;
}
/*!
\fn QPen::setWidth(int width)
Sets the pen width to the given \a width in pixels with integer
precision.
A line width of zero indicates a cosmetic pen. This means that the
pen width is always drawn one pixel wide, independent of the \l
{QPainter#Coordinate Transformations}{transformation} set on the
painter.
Setting a pen width with a negative value is not supported.
\sa setWidthF(), width()
*/
void QPen::setWidth(int width)
{
if (width < 0)
qWarning("QPen::setWidth: Setting a pen width with a negative value is not defined");
if ((qreal)width == d->width)
return;
detach();
d->width = width;
}
/*!
Sets the pen width to the given \a width in pixels with floating point
precision.
A line width of zero indicates a cosmetic pen. This means that the
pen width is always drawn one pixel wide, independent of the \l
{QPainter#Coordinate Transformations}{transformation} on the
painter.
Setting a pen width with a negative value is not supported.
\sa setWidth() widthF()
*/
void QPen::setWidthF(qreal width)
{
if (width < 0.f)
qWarning("QPen::setWidthF: Setting a pen width with a negative value is not defined");
if (qAbs(d->width - width) < 0.00000001f)
return;
detach();
d->width = width;
}
/*!
Returns the pen's cap style.
\sa setCapStyle(), {QPen#Cap Style}{Cap Style}
*/
Qt::PenCapStyle QPen::capStyle() const
{
return d->capStyle;
}
/*!
\fn void QPen::setCapStyle(Qt::PenCapStyle style)
Sets the pen's cap style to the given \a style. The default value
is Qt::SquareCap.
\sa capStyle(), {QPen#Cap Style}{Cap Style}
*/
void QPen::setCapStyle(Qt::PenCapStyle c)
{
if (d->capStyle == c)
return;
detach();
d->capStyle = c;
}
/*!
Returns the pen's join style.
\sa setJoinStyle(), {QPen#Join Style}{Join Style}
*/
Qt::PenJoinStyle QPen::joinStyle() const
{
return d->joinStyle;
}
/*!
\fn void QPen::setJoinStyle(Qt::PenJoinStyle style)
Sets the pen's join style to the given \a style. The default value
is Qt::BevelJoin.
\sa joinStyle(), {QPen#Join Style}{Join Style}
*/
void QPen::setJoinStyle(Qt::PenJoinStyle j)
{
if (d->joinStyle == j)
return;
detach();
d->joinStyle = j;
}
/*!
\fn const QColor &QPen::color() const
Returns the color of this pen's brush.
\sa brush(), setColor()
*/
QColor QPen::color() const
{
return d->brush.color();
}
/*!
\fn void QPen::setColor(const QColor &color)
Sets the color of this pen's brush to the given \a color.
\sa setBrush(), color()
*/
void QPen::setColor(const QColor &c)
{
detach();
d->brush = QBrush(c);
}
/*!
Returns the brush used to fill strokes generated with this pen.
*/
QBrush QPen::brush() const
{
return d->brush;
}
/*!
Sets the brush used to fill strokes generated with this pen to the given
\a brush.
\sa brush(), setColor()
*/
void QPen::setBrush(const QBrush &brush)
{
detach();
d->brush = brush;
}
/*!
Returns true if the pen has a solid fill, otherwise false.
\sa style(), dashPattern()
*/
bool QPen::isSolid() const
{
return d->brush.style() == Qt::SolidPattern;
}
/*!
Returns true if the pen is cosmetic; otherwise returns false.
Cosmetic pens are used to draw strokes that have a constant width
regardless of any transformations applied to the QPainter they are
used with. Drawing a shape with a cosmetic pen ensures that its
outline will have the same thickness at different scale factors.
A zero width pen is cosmetic by default; pens with a non-zero width
are non-cosmetic.
\sa setCosmetic(), widthF()
*/
bool QPen::isCosmetic() const
{
QPenData *dd = static_cast<QPenData *>(d);
return (dd->cosmetic == true) || d->width == 0;
}
/*!
Sets this pen to cosmetic or non-cosmetic, depending on the value of
\a cosmetic.
\sa isCosmetic()
*/
void QPen::setCosmetic(bool cosmetic)
{
detach();
QPenData *dd = static_cast<QPenData *>(d);
dd->cosmetic = cosmetic;
}
/*!
\fn bool QPen::operator!=(const QPen &pen) const
Returns true if the pen is different from the given \a pen;
otherwise false. Two pens are different if they have different
styles, widths or colors.
\sa operator==()
*/
/*!
\fn bool QPen::operator==(const QPen &pen) const
Returns true if the pen is equal to the given \a pen; otherwise
false. Two pens are equal if they have equal styles, widths and
colors.
\sa operator!=()
*/
bool QPen::operator==(const QPen &p) const
{
QPenData *dd = static_cast<QPenData *>(d);
QPenData *pdd = static_cast<QPenData *>(p.d);
return (p.d == d)
|| (p.d->style == d->style
&& p.d->capStyle == d->capStyle
&& p.d->joinStyle == d->joinStyle
&& p.d->width == d->width
&& pdd->miterLimit == dd->miterLimit
&& (d->style != Qt::CustomDashLine
|| (qFuzzyCompare(pdd->dashOffset, dd->dashOffset) &&
pdd->dashPattern == dd->dashPattern))
&& p.d->brush == d->brush
&& pdd->cosmetic == dd->cosmetic);
}
/*!
\fn bool QPen::isDetached()
\internal
*/
bool QPen::isDetached()
{
return d->ref == 1;
}
/*****************************************************************************
QPen stream functions
*****************************************************************************/
#ifndef QT_NO_DATASTREAM
/*!
\fn QDataStream &operator<<(QDataStream &stream, const QPen &pen)
\relates QPen
Writes the given \a pen to the given \a stream and returns a reference to
the \a stream.
\sa {Format of the QDataStream Operators}
*/
QDataStream &operator<<(QDataStream &s, const QPen &p)
{
QPenData *dd = static_cast<QPenData *>(p.d);
if (s.version() < 3) {
s << (quint8)p.style();
} else if (s.version() < QDataStream::Qt_4_3) {
s << (quint8)(p.style() | p.capStyle() | p.joinStyle());
} else {
s << (quint16)(p.style() | p.capStyle() | p.joinStyle());
s << (bool)(dd->cosmetic);
}
if (s.version() < 7) {
s << (quint8)p.width();
s << p.color();
} else {
s << double(p.widthF());
s << p.brush();
s << double(p.miterLimit());
if (sizeof(qreal) == sizeof(double)) {
s << p.dashPattern();
} else {
// ensure that we write doubles here instead of streaming the pattern
// directly; otherwise, platforms that redefine qreal might generate
// data that cannot be read on other platforms.
QVector<qreal> pattern = p.dashPattern();
s << quint32(pattern.size());
for (int i = 0; i < pattern.size(); ++i)
s << double(pattern.at(i));
}
if (s.version() >= 9)
s << double(p.dashOffset());
}
return s;
}
/*!
\fn QDataStream &operator>>(QDataStream &stream, QPen &pen)
\relates QPen
Reads a pen from the given \a stream into the given \a pen and
returns a reference to the \a stream.
\sa {Format of the QDataStream Operators}
*/
QDataStream &operator>>(QDataStream &s, QPen &p)
{
quint16 style;
quint8 width8 = 0;
double width = 0;
QColor color;
QBrush brush;
double miterLimit = 2;
QVector<qreal> dashPattern;
double dashOffset = 0;
bool cosmetic = false;
if (s.version() < QDataStream::Qt_4_3) {
quint8 style8;
s >> style8;
style = style8;
} else {
s >> style;
s >> cosmetic;
}
if (s.version() < 7) {
s >> width8;
s >> color;
brush = color;
width = width8;
} else {
s >> width;
s >> brush;
s >> miterLimit;
if (sizeof(qreal) == sizeof(double)) {
s >> dashPattern;
} else {
quint32 numDashes;
s >> numDashes;
double dash;
for (quint32 i = 0; i < numDashes; ++i) {
s >> dash;
dashPattern << dash;
}
}
if (s.version() >= 9)
s >> dashOffset;
}
p.detach();
QPenData *dd = static_cast<QPenData *>(p.d);
dd->width = width;
dd->brush = brush;
dd->style = Qt::PenStyle(style & Qt::MPenStyle);
dd->capStyle = Qt::PenCapStyle(style & Qt::MPenCapStyle);
dd->joinStyle = Qt::PenJoinStyle(style & Qt::MPenJoinStyle);
dd->dashPattern = dashPattern;
dd->miterLimit = miterLimit;
dd->dashOffset = dashOffset;
dd->cosmetic = cosmetic;
return s;
}
#endif //QT_NO_DATASTREAM
#ifndef QT_NO_DEBUG_STREAM
QDebug operator<<(QDebug dbg, const QPen &p)
{
#ifndef Q_BROKEN_DEBUG_STREAM
const char *PEN_STYLES[] = {
"NoPen",
"SolidLine",
"DashLine",
"DotLine",
"DashDotLine",
"DashDotDotLine",
"CustomDashLine"
};
dbg.nospace() << "QPen(" << p.width() << ',' << p.brush()
<< ',' << PEN_STYLES[p.style()] << ',' << int(p.capStyle())
<< ',' << int(p.joinStyle()) << ',' << p.dashPattern()
<< ',' << p.dashOffset()
<< ',' << p.miterLimit() << ')';
return dbg.space();
#else
qWarning("This compiler doesn't support streaming QPen to QDebug");
return dbg;
Q_UNUSED(p);
#endif
}
#endif
/*!
\fn DataPtr &QPen::data_ptr()
\internal
*/
/*!
\typedef QPen::DataPtr
\internal
*/
QT_END_NAMESPACE
#undef QT_COMPILING_QPEN