#
# qmake configuration for solaris-g++64
#
# The X11 header files used to be broken on Solaris until patches were
# released in early 2001 for Solaris 2.6, 7, and 8. On Solaris 2.5.1
# or non-patched systems -fpermissive works around the incompatibility
# between GCC 2.95 or better and Solaris - but we still get warnings
# because we don't use -isystem.
#
# From the standards(5) manual page:
# The XNS4 specification is safe for use only in ILP32 (32-bit)
# environments and should not be used for LP64 (64-bit)
# application environments. Use XNS5, which has LP64-clean
# interfaces that are portable across ILP32 and LP64 environments.
# [...]
# For platforms supporting the LP64 (64-bit) programming environment
# where the SC5.0 Compilers have been installed, SUSv2-conforming LP64
# applications using XNS5 library calls should be built with command
# lines of the form:
# c89 $(getconf XBS5_LP64_OFF64_CFLAGS) -D_XOPEN_SOURCE=500 \
# $(getconf XBS5_LP64_OFF64_LDFLAGS) foo.c -o foo \
# $(getconf XBS5_LP64_OFF64_LIBS) -lxnet
# So it appears that _XOPEN_SOURCE=500 should be defined when building
# 64-bit applications (on Solaris 7 and better). But then __EXTENSIONS__
# should be defined as well to recover all the default system interface.
#
MAKEFILE_GENERATOR = UNIX
TEMPLATE = app
CONFIG += qt warn_on release link_prl
QT += core gui
QMAKE_CC = gcc
QMAKE_LEX = flex
QMAKE_LEXFLAGS =
QMAKE_YACC = yacc
QMAKE_YACCFLAGS = -d
QMAKE_CFLAGS = -m64 -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
QMAKE_CFLAGS_DEPS = -M
QMAKE_CFLAGS_WARN_ON = -Wall -W
QMAKE_CFLAGS_WARN_OFF = -w
QMAKE_CFLAGS_RELEASE = -O2
QMAKE_CFLAGS_DEBUG = -g
QMAKE_CFLAGS_SHLIB = -fPIC
QMAKE_CFLAGS_STATIC_LIB = $$QMAKE_CFLAGS_SHLIB
QMAKE_CFLAGS_YACC = -Wno-unused -Wno-parentheses
QMAKE_CFLAGS_THREAD = -D_REENTRANT
QMAKE_CXX = g++
QMAKE_CXXFLAGS = $$QMAKE_CFLAGS
QMAKE_CXXFLAGS_DEPS = $$QMAKE_CFLAGS_DEPS
QMAKE_CXXFLAGS_WARN_ON = $$QMAKE_CFLAGS_WARN_ON
QMAKE_CXXFLAGS_WARN_OFF = $$QMAKE_CFLAGS_WARN_OFF
QMAKE_CXXFLAGS_RELEASE = $$QMAKE_CFLAGS_RELEASE
QMAKE_CXXFLAGS_DEBUG = $$QMAKE_CFLAGS_DEBUG
QMAKE_CXXFLAGS_SHLIB = $$QMAKE_CFLAGS_SHLIB
QMAKE_CXXFLAGS_STATIC_LIB = $$QMAKE_CFLAGS_STATIC_LIB
QMAKE_CXXFLAGS_YACC = $$QMAKE_CFLAGS_YACC
QMAKE_CXXFLAGS_THREAD = $$QMAKE_CFLAGS_THREAD
QMAKE_INCDIR = /usr/sfw/include
QMAKE_LIBDIR = /usr/sfw/lib/64
QMAKE_INCDIR_X11 = /usr/openwin/include
QMAKE_LIBDIR_X11 = /usr/openwin/lib/64
QMAKE_INCDIR_QT = $$[QT_INSTALL_HEADERS]
QMAKE_LIBDIR_QT = $$[QT_INSTALL_LIBS]
QMAKE_INCDIR_OPENGL = /usr/openwin/include
QMAKE_LIBDIR_OPENGL = /usr/openwin/lib/64
QMAKE_LINK = g++
QMAKE_LINK_SHLIB = g++
QMAKE_LINK_C = gcc
QMAKE_LINK_C_SHLIB = gcc
QMAKE_LFLAGS = -m64
QMAKE_LFLAGS_RELEASE =
QMAKE_LFLAGS_DEBUG = -g
QMAKE_LFLAGS_SHLIB = -shared
QMAKE_LFLAGS_PLUGIN = $$QMAKE_LFLAGS_SHLIB
QMAKE_LFLAGS_SONAME = -h$$LITERAL_WHITESPACE
QMAKE_LFLAGS_THREAD =
QMAKE_LFLAGS_NOUNDEF = -z defs
QMAKE_RPATH = -Wl,-R,
QMAKE_LIBS =
QMAKE_LIBS_DYNLOAD = -ldl
QMAKE_LIBS_X11 = -lXext -lX11 -lresolv -lsocket -lnsl
QMAKE_LIBS_X11SM = -lSM -lICE
QMAKE_LIBS_NIS =
QMAKE_LIBS_OPENGL = -lGLU -lGL
QMAKE_LIBS_OPENGL_QT = -lGL
QMAKE_LIBS_THREAD = -lpthread -lrt
QMAKE_LIBS_NETWORK = -lresolv -lsocket -lxnet -lnsl
QMAKE_MOC = $$[QT_INSTALL_BINS]/moc
QMAKE_UIC = $$[QT_INSTALL_BINS]/uic
QMAKE_AR = ar cq
QMAKE_OBJCOPY = objcopy
QMAKE_RANLIB =
QMAKE_TAR = tar -cf
QMAKE_GZIP = gzip -9f
QMAKE_COPY = cp -f
QMAKE_MOVE = mv -f
QMAKE_DEL_FILE = rm -f
QMAKE_DEL_DIR = rmdir
QMAKE_CHK_DIR_EXISTS = test -d
QMAKE_MKDIR = mkdir -p
include(../common/unix.conf)
load(qt_config)