/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
** * Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** * Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in
** the documentation and/or other materials provided with the
** distribution.
** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
** the names of its contributors may be used to endorse or promote
** products derived from this software without specific prior written
** permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
** $QT_END_LICENSE$
**
****************************************************************************/
/****************************************************************************
**
** This is a simple QGLWidget displaying an openGL wireframe box
**
** The OpenGL code is mostly borrowed from Brian Pauls "spin" example
** in the Mesa distribution
**
****************************************************************************/
#include "glbox.h"
#include <QAxAggregated>
#include <QUuid>
//! [0]
#include <objsafe.h>
//! [0]
#if defined(Q_CC_MSVC)
#pragma warning(disable:4305) // init: truncation from const double to float
#endif
/*!
Create a GLBox widget
*/
GLBox::GLBox( QWidget* parent, const char* name )
: QGLWidget( parent )
{
xRot = yRot = zRot = 0.0; // default object rotation
scale = 1.25; // default object scale
object = 0;
}
/*!
Release allocated resources
*/
GLBox::~GLBox()
{
makeCurrent();
glDeleteLists( object, 1 );
}
/*!
Paint the box. The actual openGL commands for drawing the box are
performed here.
*/
void GLBox::paintGL()
{
glClear( GL_COLOR_BUFFER_BIT );
glLoadIdentity();
glTranslatef( 0.0, 0.0, -10.0 );
glScalef( scale, scale, scale );
glRotatef( xRot, 1.0, 0.0, 0.0 );
glRotatef( yRot, 0.0, 1.0, 0.0 );
glRotatef( zRot, 0.0, 0.0, 1.0 );
glCallList( object );
}
/*!
Set up the OpenGL rendering state, and define display list
*/
void GLBox::initializeGL()
{
qglClearColor(Qt::black); // Let OpenGL clear to black
object = makeObject(); // Generate an OpenGL display list
glShadeModel( GL_FLAT );
}
/*!
Set up the OpenGL view port, matrix mode, etc.
*/
void GLBox::resizeGL( int w, int h )
{
glViewport( 0, 0, (GLint)w, (GLint)h );
glMatrixMode( GL_PROJECTION );
glLoadIdentity();
glFrustum( -1.0, 1.0, -1.0, 1.0, 5.0, 15.0 );
glMatrixMode( GL_MODELVIEW );
}
/*!
Generate an OpenGL display list for the object to be shown, i.e. the box
*/
GLuint GLBox::makeObject()
{
GLuint list;
list = glGenLists( 1 );
glNewList( list, GL_COMPILE );
qglColor(Qt::white); // Shorthand for glColor3f or glIndex
glLineWidth( 2.0 );
glBegin( GL_LINE_LOOP );
glVertex3f( 1.0, 0.5, -0.4 );
glVertex3f( 1.0, -0.5, -0.4 );
glVertex3f( -1.0, -0.5, -0.4 );
glVertex3f( -1.0, 0.5, -0.4 );
glEnd();
glBegin( GL_LINE_LOOP );
glVertex3f( 1.0, 0.5, 0.4 );
glVertex3f( 1.0, -0.5, 0.4 );
glVertex3f( -1.0, -0.5, 0.4 );
glVertex3f( -1.0, 0.5, 0.4 );
glEnd();
glBegin( GL_LINES );
glVertex3f( 1.0, 0.5, -0.4 ); glVertex3f( 1.0, 0.5, 0.4 );
glVertex3f( 1.0, -0.5, -0.4 ); glVertex3f( 1.0, -0.5, 0.4 );
glVertex3f( -1.0, -0.5, -0.4 ); glVertex3f( -1.0, -0.5, 0.4 );
glVertex3f( -1.0, 0.5, -0.4 ); glVertex3f( -1.0, 0.5, 0.4 );
glEnd();
glEndList();
return list;
}
/*!
Set the rotation angle of the object to \e degrees around the X axis.
*/
void GLBox::setXRotation( int degrees )
{
xRot = (GLfloat)(degrees % 360);
updateGL();
}
/*!
Set the rotation angle of the object to \e degrees around the Y axis.
*/
void GLBox::setYRotation( int degrees )
{
yRot = (GLfloat)(degrees % 360);
updateGL();
}
/*!
Set the rotation angle of the object to \e degrees around the Z axis.
*/
void GLBox::setZRotation( int degrees )
{
zRot = (GLfloat)(degrees % 360);
updateGL();
}
//! [1]
class ObjectSafetyImpl : public QAxAggregated,
public IObjectSafety
{
public:
//! [1] //! [2]
ObjectSafetyImpl() {}
long queryInterface( const QUuid &iid, void **iface )
{
*iface = 0;
if ( iid == IID_IObjectSafety )
*iface = (IObjectSafety*)this;
else
return E_NOINTERFACE;
AddRef();
return S_OK;
}
//! [2] //! [3]
QAXAGG_IUNKNOWN;
//! [3] //! [4]
HRESULT WINAPI GetInterfaceSafetyOptions( REFIID riid, DWORD *pdwSupportedOptions, DWORD *pdwEnabledOptions )
{
*pdwSupportedOptions = INTERFACESAFE_FOR_UNTRUSTED_DATA | INTERFACESAFE_FOR_UNTRUSTED_CALLER;
*pdwEnabledOptions = INTERFACESAFE_FOR_UNTRUSTED_DATA | INTERFACESAFE_FOR_UNTRUSTED_CALLER;
return S_OK;
}
HRESULT WINAPI SetInterfaceSafetyOptions( REFIID riid, DWORD pdwSupportedOptions, DWORD pdwEnabledOptions )
{
return S_OK;
}
};
//! [4] //! [5]
QAxAggregated *GLBox::createAggregate()
{
return new ObjectSafetyImpl();
}
//! [5]