/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the QtGui module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights.  These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/



/*!
    \class QButtonGroup
    \brief The QButtonGroup class provides a container to organize groups of
    button widgets.

    \ingroup organizers
    \ingroup geomanagement

    QButtonGroup provides an abstract container into which button widgets can
    be placed. It does not provide a visual representation of this container
    (see QGroupBox for a container widget), but instead manages the states of
    each of the buttons in the group.

    An \l {QButtonGroup::exclusive} {exclusive} button group switches
    off all checkable (toggle) buttons except the one that was
    clicked. By default, a button group is exclusive. The buttons in a
    button group are usually checkable QPushButton's, \l{QCheckBox}es
    (normally for non-exclusive button groups), or \l{QRadioButton}s.
    If you create an exclusive button group, you should ensure that
    one of the buttons in the group is initially checked; otherwise,
    the group will initially be in a state where no buttons are
    checked.

    A button is added to the group with addButton(). It can be removed
    from the group with removeButton(). If the group is exclusive, the
    currently checked button is available as checkedButton(). If a
    button is clicked the buttonClicked() signal is emitted. For a
    checkable button in an exclusive group this means that the button
    was checked. The list of buttons in the group is returned by
    buttons().

    In addition, QButtonGroup can map between integers and buttons.
    You can assign an integer id to a button with setId(), and
    retrieve it with id(). The id of the currently checked button is
    available with checkedId(), and there is an overloaded signal
    buttonClicked() which emits the id of the button. The id \c {-1}
    is reserved by QButtonGroup to mean "no such button". The purpose
    of the mapping mechanism is to simplify the representation of enum
    values in a user interface.

    \sa QGroupBox QPushButton, QCheckBox, QRadioButton
*/

/*!
    \fn QButtonGroup::QButtonGroup(QObject *parent)

    Constructs a new, empty button group with the given \a parent.

    \sa addButton() setExclusive()
*/

/*!
    \fn QButtonGroup::~QButtonGroup()

    Destroys the button group.
*/

/*!
    \property QButtonGroup::exclusive
    \brief whether the button group is exclusive

    If this property is true then only one button in the group can be checked
    at any given time. The user can click on any button to check it, and that
    button will replace the existing one as the checked button in the group.

    In an exclusive group, the user cannot uncheck the currently checked button
    by clicking on it; instead, another button in the group must be clicked
    to set the new checked button for that group.

    By default, this property is true.
*/

/*!
    \fn void QButtonGroup::buttonClicked(QAbstractButton *button)

    This signal is emitted when the given \a button is clicked. A
    button is clicked when it is first pressed and then released, when
    its shortcut key is typed, or programmatically when
    QAbstractButton::click() or QAbstractButton::animateClick() is
    called.


    \sa checkedButton(), QAbstractButton::clicked()
*/

/*!
    \fn void QButtonGroup::buttonClicked(int id)

    This signal is emitted when a button with the given \a id is
    clicked.

    \sa checkedButton(), QAbstractButton::clicked()
*/

/*!
    \fn void QButtonGroup::buttonPressed(QAbstractButton *button)
    \since 4.2

    This signal is emitted when the given \a button is pressed down. 

    \sa QAbstractButton::pressed()
*/

/*!
    \fn void QButtonGroup::buttonPressed(int id)
    \since 4.2

    This signal is emitted when a button with the given \a id is
    pressed down.

    \sa QAbstractButton::pressed()
*/

/*!
    \fn void QButtonGroup::buttonReleased(QAbstractButton *button)
    \since 4.2

    This signal is emitted when the given \a button is released. 

    \sa QAbstractButton::released()
*/

/*!
    \fn void QButtonGroup::buttonReleased(int id)
    \since 4.2

    This signal is emitted when a button with the given \a id is
    released.

    \sa QAbstractButton::released()
*/

/*!
    \fn void QButtonGroup::addButton(QAbstractButton *button);

    Adds the given \a button to the end of the group's internal list
    of buttons.  An id will be assigned to the button by this
    QButtonGroup. Automatically assigned ids are guaranteed to be
    negative, starting with -2. If you are also assigning your own
    ids, use positive values to avoid conflicts.

    \sa removeButton() buttons()
*/

/*!
    \fn void QButtonGroup::addButton(QAbstractButton *button, int id);

    Adds the given \a button to the button group, with the given \a
    id. It is recommended to assign only positive ids.

    \sa removeButton() buttons()
*/

/*!
    \fn void QButtonGroup::removeButton(QAbstractButton *button);

    Removes the given \a button from the button group.

    \sa addButton() buttons()
*/

/*!
    \fn QList<QAbstractButton*> QButtonGroup::buttons() const

    Returns the list of this groups's buttons. This may be empty.

    \sa addButton(), removeButton()
*/

/*!
    \fn QAbstractButton *QButtonGroup::checkedButton() const;

    Returns the button group's checked button, or 0 if no buttons are
    checked.

    \sa buttonClicked()
*/

/*!
    \fn QAbstractButton *QButtonGroup::button(int id) const;
    \since 4.1

    Returns the button with the specified \a id, or 0 if no such button
    exists.
*/

/*!
    \fn void QButtonGroup::setId(QAbstractButton *button, int id)
    \since 4.1

    Sets the \a id for the specified \a button. Note that \a id can
    not be -1.

    \sa id()
*/

/*!
    \fn int QButtonGroup::id(QAbstractButton *button) const;
    \since 4.1

    Returns the id for the specified \a button, or -1 if no such button
    exists.


    \sa setId()
*/

/*!
    \fn int QButtonGroup::checkedId() const;
    \since 4.1

    Returns the id of the checkedButton(), or -1 if no button is checked.

    \sa setId()
*/


/*! \fn void QButtonGroup::insert(QAbstractButton *b)

    Use addButton() instead.
*/

/*! \fn void QButtonGroup::remove(QAbstractButton *b)

    Use removeButton() instead.
*/