diff -r 000000000000 -r 1918ee327afb src/gui/painting/qprintengine_qws.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/gui/painting/qprintengine_qws.cpp	Mon Jan 11 14:00:40 2010 +0000
@@ -0,0 +1,881 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the QtGui module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <private/qprintengine_qws_p.h>
+
+#ifndef QT_NO_PRINTER
+
+#include <private/qpaintengine_raster_p.h>
+#include <qimage.h>
+#include <qfile.h>
+#include <qdebug.h>
+#include <QCopChannel>
+
+QT_BEGIN_NAMESPACE
+
+#define MM(n) int((n * 720 + 127) / 254)
+#define IN(n) int(n * 72)
+
+extern QSizeF qt_paperSizeToQSizeF(QPrinter::PaperSize size);
+
+QtopiaPrintEngine::QtopiaPrintEngine(QPrinter::PrinterMode mode)
+    : QPaintEngine(*(new QtopiaPrintEnginePrivate( mode )))
+{
+    d_func()->initialize();
+}
+
+bool QtopiaPrintEngine::begin(QPaintDevice *)
+{
+    Q_D(QtopiaPrintEngine);
+    Q_ASSERT_X(d->printerState == QPrinter::Idle, "QtopiaPrintEngine", "printer already active");
+
+    // Create a new off-screen monochrome image to handle the drawing process.
+    QSize size = paperRect().size();
+    if ( d->pageImage )
+	delete d->pageImage;
+    d->pageImage = new QImage( size, QImage::Format_RGB32 );
+    if ( !(d->pageImage) )
+	return false;
+
+    // Recreate the paint engine on the new image.
+    delete d->_paintEngine;
+    d->_paintEngine = 0;
+    d->paintEngine()->state = state;
+
+    // Begin the paint process on the image.
+    if (!d->paintEngine()->begin(d->pageImage))
+        return false;
+
+    // Clear the first page to all-white.
+    clearPage();
+
+    // Clear the print buffer and output the image header.
+    d->buffer.clear();
+    d->writeG3FaxHeader();
+
+    // The print engine is currently active.
+    d->printerState = QPrinter::Active;
+    return true;
+}
+
+bool QtopiaPrintEngine::end()
+{
+    Q_D(QtopiaPrintEngine);
+
+    d->paintEngine()->end();
+
+    // Flush the last page.
+    flushPage();
+
+    // Output the fax data to a file (TODO: send to the print queuing daemon).
+    QString filename;
+    if ( !d->outputFileName.isEmpty() )
+        filename = QString::fromLocal8Bit(qgetenv("HOME").constData()) + QLatin1String("/Documents/") + d->outputFileName;
+    else
+        filename = QString::fromLocal8Bit(qgetenv("HOME").constData()) + QLatin1String("/tmp/qwsfax.tiff");
+
+    setProperty(QPrintEngine::PPK_OutputFileName, filename);
+    QFile file( filename );
+    if ( !file.open( QIODevice::WriteOnly | QIODevice::Truncate ) ) {
+	qDebug( "Failed to open %s for printer output",
+		filename.toLatin1().constData() );
+    } else {
+	file.write( d->buffer.data() );
+	file.close();
+    }
+
+    // Free up the memory for the image buffer.
+    d->buffer.clear();
+
+    // Finalize the print job.
+    d->printerState = QPrinter::Idle;
+
+    // call qcop service
+    QMap<QString, QVariant> map;
+    for ( int x = 0; x <= QPrintEngine::PPK_Duplex; x++ )
+        map.insert( QString::number(x), property((QPrintEngine::PrintEnginePropertyKey)(x)));
+    QVariant variant(map);
+
+    QByteArray data;
+    QDataStream out(&data, QIODevice::WriteOnly);
+    out << variant;
+    QCopChannel::send(QLatin1String("QPE/Service/Print"), QLatin1String("print(QVariant)"), data);
+
+    return true;
+}
+
+QPaintEngine *QtopiaPrintEngine::paintEngine() const
+{
+    return const_cast<QtopiaPrintEnginePrivate *>(d_func())->paintEngine();
+}
+
+void QtopiaPrintEngine::drawPixmap(const QRectF &r, const QPixmap &pm, const QRectF &sr)
+{
+    Q_D(QtopiaPrintEngine);
+    Q_ASSERT(d->printerState == QPrinter::Active);
+    d->paintEngine()->drawPixmap(r, pm, sr);
+}
+
+void QtopiaPrintEngine::drawTextItem(const QPointF &p, const QTextItem &ti)
+{
+    Q_D(QtopiaPrintEngine);
+    Q_ASSERT(d->printerState == QPrinter::Active);
+    d->paintEngine()->drawTextItem(p, ti);
+}
+
+void QtopiaPrintEngine::updateState(const QPaintEngineState &state)
+{
+    Q_D(QtopiaPrintEngine);
+    d->paintEngine()->updateState(state);
+}
+
+QRect QtopiaPrintEngine::paperRect() const
+{
+    QSizeF s = qt_paperSizeToQSizeF(d_func()->paperSize);
+    s.rwidth() = MM(s.width());
+    s.rheight() = MM(s.height());
+    int w = qRound(s.width()*d_func()->resolution/72.);
+    int h = qRound(s.height()*d_func()->resolution/72.);
+    if (d_func()->orientation == QPrinter::Portrait)
+        return QRect(0, 0, w, h);
+    else
+        return QRect(0, 0, h, w);
+}
+
+QRect QtopiaPrintEngine::pageRect() const
+{
+    QRect r = paperRect();
+    if (d_func()->fullPage)
+        return r;
+    // would be nice to get better margins than this.
+    return QRect(d_func()->resolution/3, d_func()->resolution/3, r.width()-2*d_func()->resolution/3, r.height()-2*d_func()->resolution/3);
+}
+
+bool QtopiaPrintEngine::newPage()
+{
+    flushPage();
+    clearPage();
+    ++(d_func()->pageNumber);
+    return true;
+}
+
+bool QtopiaPrintEngine::abort()
+{
+    return false;
+}
+
+QPrinter::PrinterState QtopiaPrintEngine::printerState() const
+{
+    return d_func()->printerState;
+}
+
+int QtopiaPrintEngine::metric(QPaintDevice::PaintDeviceMetric metricType) const
+{
+    int val;
+    QRect r = d_func()->fullPage ? paperRect() : pageRect();
+    switch (metricType) {
+    case QPaintDevice::PdmWidth:
+        val = r.width();
+        break;
+    case QPaintDevice::PdmHeight:
+        val = r.height();
+        break;
+    case QPaintDevice::PdmDpiX:
+        val = d_func()->resolution;
+        break;
+    case QPaintDevice::PdmDpiY:
+        val = d_func()->resolution;
+        break;
+    case QPaintDevice::PdmPhysicalDpiX:
+    case QPaintDevice::PdmPhysicalDpiY:
+        val = QT_QWS_PRINTER_DEFAULT_DPI;
+        break;
+    case QPaintDevice::PdmWidthMM:
+        val = qRound(r.width()*25.4/d_func()->resolution);
+        break;
+    case QPaintDevice::PdmHeightMM:
+        val = qRound(r.height()*25.4/d_func()->resolution);
+        break;
+    case QPaintDevice::PdmNumColors:
+        val = 2;
+        break;
+    case QPaintDevice::PdmDepth:
+        val = 1;
+        break;
+    default:
+        qWarning("QtopiaPrintEngine::metric: Invalid metric command");
+        return 0;
+    }
+    return val;
+}
+
+QVariant QtopiaPrintEngine::property(PrintEnginePropertyKey key) const
+{
+    Q_D(const  QtopiaPrintEngine);
+    QVariant ret;
+
+    switch (key) {
+    case PPK_CollateCopies:
+        ret = d->collateCopies;
+        break;
+    case PPK_ColorMode:
+        ret = d->colorMode;
+        break;
+    case PPK_Creator:
+        ret = d->creator;
+        break;
+    case PPK_DocumentName:
+        ret = d->docName;
+        break;
+    case PPK_FullPage:
+        ret = d->fullPage;
+        break;
+    case PPK_NumberOfCopies:
+        ret = d->numCopies;
+        break;
+    case PPK_Orientation:
+        ret = d->orientation;
+        break;
+    case PPK_OutputFileName:
+        ret = d->outputFileName;
+        break;
+    case PPK_PageOrder:
+        ret = d->pageOrder;
+        break;
+    case PPK_PageRect:
+        ret = pageRect();
+        break;
+    case PPK_PaperSize:
+        ret = d->paperSize;
+        break;
+    case PPK_PaperRect:
+        ret = paperRect();
+        break;
+    case PPK_PaperSource:
+        ret = d->paperSource;
+        break;
+    case PPK_PrinterName:
+        ret = d->printerName;
+        break;
+    case PPK_PrinterProgram:
+        ret = d->printProgram;
+        break;
+    case PPK_Resolution:
+        ret = d->resolution;
+        break;
+    case PPK_SupportedResolutions:
+        ret = QList<QVariant>() << QT_QWS_PRINTER_DEFAULT_DPI;
+        break;
+    default:
+        break;
+    }
+    return ret;
+}
+
+void QtopiaPrintEngine::setProperty(PrintEnginePropertyKey key, const QVariant &value)
+{
+    Q_D(QtopiaPrintEngine);
+    switch (key) {
+    case PPK_CollateCopies:
+        d->collateCopies = value.toBool();
+        break;
+    case PPK_ColorMode:
+        d->colorMode = QPrinter::ColorMode(value.toInt());
+        break;
+    case PPK_Creator:
+        d->creator = value.toString();
+        break;
+    case PPK_DocumentName:
+        d->docName = value.toString();
+        break;
+    case PPK_FullPage:
+        d->fullPage = value.toBool();
+        break;
+    case PPK_NumberOfCopies:
+        d->numCopies = value.toInt();
+        break;
+    case PPK_Orientation:
+        d->orientation = QPrinter::Orientation(value.toInt());
+        break;
+    case PPK_OutputFileName:
+        d->outputFileName = value.toString();
+        break;
+    case PPK_PageOrder:
+        d->pageOrder = QPrinter::PageOrder(value.toInt());
+        break;
+    case PPK_PaperSize:
+        d->paperSize = QPrinter::PaperSize(value.toInt());
+        break;
+    case PPK_PaperSource:
+        d->paperSource = QPrinter::PaperSource(value.toInt());
+    case PPK_PrinterName:
+        d->printerName = value.toString();
+        break;
+    case PPK_PrinterProgram:
+        d->printProgram = value.toString();
+        break;
+    case PPK_Resolution:
+        d->resolution = value.toInt();
+        break;
+    default:
+        break;
+    }
+}
+
+void QtopiaPrintEngine::clearPage()
+{
+    d_func()->pageImage->fill(QColor(255, 255, 255).rgb());
+}
+
+void QtopiaPrintEngine::flushPage()
+{
+    d_func()->writeG3FaxPage();
+}
+
+QtopiaPrintEnginePrivate::~QtopiaPrintEnginePrivate()
+{
+    if ( pageImage )
+	delete pageImage;
+}
+
+void QtopiaPrintEnginePrivate::initialize()
+{
+    _paintEngine = 0;
+}
+
+QPaintEngine *QtopiaPrintEnginePrivate::paintEngine()
+{
+    if (!_paintEngine)
+        _paintEngine = new QRasterPaintEngine(pageImage);
+    return _paintEngine;
+}
+
+void QtopiaPrintEnginePrivate::writeG3FaxHeader()
+{
+    // Write the TIFF file magic number (little-endian TIFF).
+    buffer.append( (char)'I' );
+    buffer.append( (char)'I' );
+    buffer.append( (char)42 );
+    buffer.append( (char)0 );
+
+    // Leave a place-holder for the IFD offset of the first page.
+    ifdPatch = buffer.size();
+    buffer.append( (int)0 );
+}
+
+// Tag values, from RFC 2301.
+#define	TIFF_IFD_NEW_SUB_FILE_TYPE	254
+#define	TIFF_IFD_IMAGE_WIDTH		256
+#define	TIFF_IFD_IMAGE_LENGTH		257
+#define	TIFF_IFD_BITS_PER_SAMPLE	258
+#define	TIFF_IFD_COMPRESSION		259
+#define	TIFF_IFD_PHOTOMETRIC_INTERP	262
+#define	TIFF_IFD_FILL_ORDER		266
+#define	TIFF_IFD_STRIP_OFFSETS		273
+#define	TIFF_IFD_ORIENTATION		274
+#define	TIFF_IFD_SAMPLES_PER_PIXEL	277
+#define	TIFF_IFD_ROWS_PER_STRIP		278
+#define	TIFF_IFD_STRIP_BYTE_COUNTS	279
+#define	TIFF_IFD_X_RESOLUTION	    	282
+#define	TIFF_IFD_Y_RESOLUTION	    	283
+#define	TIFF_IFD_PLANAR_CONFIG		284
+#define	TIFF_IFD_T4_OPTIONS		292
+#define	TIFF_IFD_RESOLUTION_UNIT	296
+#define	TIFF_IFD_PAGE_NUMBER	    	297
+#define	TIFF_IFD_CLEAN_FAX_DATA		327
+
+// IFD type values.
+#define	TIFF_TYPE_SHORT			3
+#define	TIFF_TYPE_LONG			4
+#define	TIFF_TYPE_RATIONAL		5
+
+// Construct a SHORT pair from two values.
+#define	TIFF_SHORT_PAIR(a,b)		(((a) & 0xFFFF) | ((b) << 16))
+
+// Width of a FAX page in pixels, in the baseline specification from RFC 2301.
+// This must be hard-wired, as per the RFC.  We truncate any pixels that
+// are beyond this limit, or pad lines to reach this limit.
+#define	TIFF_FAX_WIDTH			1728
+
+void QtopiaPrintEnginePrivate::writeG3FaxPage()
+{
+    // Pad the image file to a word boundary, just in case.
+    buffer.pad();
+
+    // Back-patch the IFD link for the previous page.
+    buffer.patch( ifdPatch, buffer.size() );
+
+    // Output the contents of the IFD for this page (these must be
+    // in ascending order of tag value).
+    buffer.append( (short)19 );	    // Number of IFD entries.
+    writeG3IFDEntry( TIFF_IFD_NEW_SUB_FILE_TYPE, TIFF_TYPE_LONG, 1, 2 );
+    writeG3IFDEntry( TIFF_IFD_IMAGE_WIDTH, TIFF_TYPE_LONG, 1, TIFF_FAX_WIDTH );
+    writeG3IFDEntry
+	( TIFF_IFD_IMAGE_LENGTH, TIFF_TYPE_LONG, 1, pageImage->height() );
+    writeG3IFDEntry( TIFF_IFD_BITS_PER_SAMPLE, TIFF_TYPE_SHORT, 1, 1 );
+    writeG3IFDEntry( TIFF_IFD_COMPRESSION, TIFF_TYPE_SHORT, 1, 3 );
+    writeG3IFDEntry( TIFF_IFD_PHOTOMETRIC_INTERP, TIFF_TYPE_SHORT, 1, 0 );
+    writeG3IFDEntry( TIFF_IFD_FILL_ORDER, TIFF_TYPE_SHORT, 1, 1 );
+    int stripOffsets =
+	writeG3IFDEntry( TIFF_IFD_STRIP_OFFSETS, TIFF_TYPE_LONG, 1, 0 );
+    writeG3IFDEntry( TIFF_IFD_ORIENTATION, TIFF_TYPE_SHORT, 1, 1 );
+    writeG3IFDEntry( TIFF_IFD_SAMPLES_PER_PIXEL, TIFF_TYPE_SHORT, 1, 1 );
+    writeG3IFDEntry
+	( TIFF_IFD_ROWS_PER_STRIP, TIFF_TYPE_LONG, 1, pageImage->height() );
+    int stripBytes = writeG3IFDEntry
+	( TIFF_IFD_STRIP_BYTE_COUNTS, TIFF_TYPE_LONG, 1, 0 );
+    int xres =
+	writeG3IFDEntry( TIFF_IFD_X_RESOLUTION, TIFF_TYPE_RATIONAL, 1, 0 );
+    int yres =
+	writeG3IFDEntry( TIFF_IFD_Y_RESOLUTION, TIFF_TYPE_RATIONAL, 1, 0 );
+    writeG3IFDEntry( TIFF_IFD_PLANAR_CONFIG, TIFF_TYPE_SHORT, 1, 1 );
+    writeG3IFDEntry( TIFF_IFD_T4_OPTIONS, TIFF_TYPE_LONG, 1, 2 );
+    writeG3IFDEntry( TIFF_IFD_RESOLUTION_UNIT, TIFF_TYPE_SHORT, 1, 2 );
+    writeG3IFDEntry( TIFF_IFD_PAGE_NUMBER, TIFF_TYPE_SHORT, 2,
+		     TIFF_SHORT_PAIR( pageNumber, 0 ) );
+    writeG3IFDEntry( TIFF_IFD_CLEAN_FAX_DATA, TIFF_TYPE_SHORT, 1, 0 );
+
+    // Leave a place-holder for the IFD offset of the next page.
+    ifdPatch = buffer.size();
+    buffer.append( (int)0 );
+
+    // Output the X and Y resolutions, as rational values (usually 200/1).
+    buffer.patch( xres, buffer.size() );
+    buffer.append( (int)resolution );
+    buffer.append( (int)1 );
+    buffer.patch( yres, buffer.size() );
+    buffer.append( (int)resolution );
+    buffer.append( (int)1 );
+
+    // We are now at the start of the image data - set the strip offset.
+    int start = buffer.size();
+    buffer.patch( stripOffsets, start );
+
+    // Output the image data.
+    int width = pageImage->width();
+    QImage::Format imageFormat = pageImage->format();
+    for ( int y = 0; y < pageImage->height(); ++y ) {
+	unsigned char *scan = pageImage->scanLine(y);
+	int prev, pixel, len;
+        writeG3EOL();
+	prev = 0;
+	len = 0;
+
+        uint currentColor = qRgb(255, 255, 255); // start with white
+
+	for ( int x = 0; x < width && x < TIFF_FAX_WIDTH; ++x ) {
+            if ( imageFormat == QImage::Format_RGB32 ) {
+                // read color of the current pixel
+                uint *p = (uint *)scan + x;
+
+                if ( *p == currentColor ) { // if it is the same color
+                    len++; // imcrement length
+                } else { // otherwise write color into the buffer
+                    if ( len > 0 ) {
+                        if ( currentColor == qRgb(0, 0, 0) )
+                            writeG3BlackRun( len );
+                        else
+                            writeG3WhiteRun( len );
+                    }
+                    // initialise length and color;
+                    len = 1;
+                    currentColor = *p;
+                }
+            } else if ( imageFormat == QImage::Format_Mono ) {
+    	        pixel = ((scan[x >> 3] & (1 << (x & 7))) != 0);
+    	        if ( pixel != prev ) {
+		    if ( prev ) {
+		        writeG3BlackRun( len );
+                    } else {
+	    	        writeG3WhiteRun( len );
+		    }
+		    prev = pixel;
+		    len = 1;
+	        } else {
+		    ++len;
+	        }
+            }
+	}
+
+        if ( imageFormat == QImage::Format_RGB32 ) {
+    	    // Output the last run on the line, and pad to TIFF_FAX_WIDTH.
+            if ( len != 0 ) {
+                if ( currentColor == qRgb(0, 0, 0) )
+                    writeG3BlackRun( len );
+                else
+                    writeG3WhiteRun( len );
+            }
+            if ( width < TIFF_FAX_WIDTH )
+                writeG3WhiteRun( TIFF_FAX_WIDTH - width );
+        } else if ( imageFormat == QImage::Format_Mono ) {
+            if ( len != 0 ) {
+	        if ( prev ) {
+		    writeG3BlackRun( len );
+		    if ( width < TIFF_FAX_WIDTH ) {
+		        writeG3WhiteRun( TIFF_FAX_WIDTH - width );
+		    }
+	        } else {
+		    if ( width < TIFF_FAX_WIDTH ) {
+		        writeG3WhiteRun( len + ( TIFF_FAX_WIDTH - width ) );
+		    } else {
+		        writeG3WhiteRun( len );
+		    }
+	        }
+	    }
+        }
+    }
+
+    // Flush the last partial byte, which is padded with zero fill bits.
+    if ( partialBits > 0 ) {
+	buffer.append( (char)( partialByte << ( 8 - partialBits ) ) );
+	partialByte = 0;
+	partialBits = 0;
+    }
+
+    // end of page add six EOLs
+    for ( int i = 0; i < 6; i++ )
+        writeG3EOL();
+
+    // Update the byte count for the image data strip.
+    buffer.patch( stripBytes, buffer.size() - start );
+}
+
+int QtopiaPrintEnginePrivate::writeG3IFDEntry
+	( int tag, int type, int count, int value )
+{
+    buffer.append( (short)tag );
+    buffer.append( (short)type );
+    buffer.append( count );
+    buffer.append( value );
+    return buffer.size() - 4;    // Offset of the value for back-patching.
+}
+
+void QtopiaPrintEnginePrivate::writeG3Code( int code, int bits )
+{
+    partialByte = ( ( partialByte << bits ) | code );
+    partialBits += bits;
+    while ( partialBits >= 8 ) {
+	partialBits -= 8;
+	buffer.append( (char)( partialByte >> partialBits ) );
+    }
+}
+
+void QtopiaPrintEnginePrivate::writeG3WhiteRun( int len )
+{
+    static struct {
+	unsigned short code;
+	unsigned short bits;
+    } whiteCodes[64 + 27] = {
+	{0x0035, 8},		// 0
+	{0x0007, 6},
+	{0x0007, 4},
+	{0x0008, 4},
+	{0x000B, 4},
+	{0x000C, 4},
+	{0x000E, 4},
+	{0x000F, 4},
+	{0x0013, 5},		// 8
+	{0x0014, 5},
+	{0x0007, 5},
+	{0x0008, 5},
+	{0x0008, 6},
+	{0x0003, 6},
+	{0x0034, 6},
+	{0x0035, 6},
+	{0x002A, 6},		// 16
+	{0x002B, 6},
+	{0x0027, 7},
+	{0x000C, 7},
+	{0x0008, 7},
+	{0x0017, 7},
+	{0x0003, 7},
+	{0x0004, 7},
+	{0x0028, 7},		// 24
+	{0x002B, 7},
+	{0x0013, 7},
+	{0x0024, 7},
+	{0x0018, 7},
+	{0x0002, 8},
+	{0x0003, 8},
+	{0x001A, 8},
+	{0x001B, 8},		// 32
+	{0x0012, 8},
+	{0x0013, 8},
+	{0x0014, 8},
+	{0x0015, 8},
+	{0x0016, 8},
+	{0x0017, 8},
+	{0x0028, 8},
+	{0x0029, 8},		// 40
+	{0x002A, 8},
+	{0x002B, 8},
+	{0x002C, 8},
+	{0x002D, 8},
+	{0x0004, 8},
+	{0x0005, 8},
+	{0x000A, 8},
+	{0x000B, 8},		// 48
+	{0x0052, 8},
+	{0x0053, 8},
+	{0x0054, 8},
+	{0x0055, 8},
+	{0x0024, 8},
+	{0x0025, 8},
+	{0x0058, 8},
+	{0x0059, 8},		// 56
+	{0x005A, 8},
+	{0x005B, 8},
+	{0x004A, 8},
+	{0x004B, 8},
+	{0x0032, 8},
+	{0x0033, 8},
+	{0x0034, 8},
+	{0x001B, 5},		// Make up codes: 64
+	{0x0012, 5},		// 128
+	{0x0017, 6},		// 192
+	{0x0037, 7},		// 256
+	{0x0036, 8},		// 320
+	{0x0037, 8},		// 384
+	{0x0064, 8},		// 448
+	{0x0065, 8},		// 512
+	{0x0068, 8},		// 576
+	{0x0067, 8},		// 640
+	{0x00CC, 9},		// 704
+	{0x00CD, 9},		// 768
+	{0x00D2, 9},		// 832
+	{0x00D3, 9},		// 896
+	{0x00D4, 9},		// 960
+	{0x00D5, 9},		// 1024
+	{0x00D6, 9},		// 1088
+	{0x00D7, 9},		// 1152
+	{0x00D8, 9},		// 1216
+	{0x00D9, 9},		// 1280
+	{0x00DA, 9},		// 1344
+	{0x00DB, 9},		// 1408
+	{0x0098, 9},		// 1472
+	{0x0099, 9},		// 1536
+	{0x009A, 9},		// 1600
+	{0x0018, 6},		// 1664
+	{0x009B, 9},		// 1728
+    };
+    if ( len >= 64 ) {
+	int index = 63 + (len >> 6);
+	writeG3Code( whiteCodes[index].code, whiteCodes[index].bits );
+	len &= 63;
+    }
+    writeG3Code( whiteCodes[len].code, whiteCodes[len].bits );
+}
+
+void QtopiaPrintEnginePrivate::writeG3BlackRun( int len )
+{
+    static struct {
+	unsigned short code;
+	unsigned short bits;
+    } blackCodes[64 + 27] = {
+	{0x0037, 10},		// 0
+	{0x0002, 3},
+	{0x0003, 2},
+	{0x0002, 2},
+	{0x0003, 3},
+	{0x0003, 4},
+	{0x0002, 4},
+	{0x0003, 5},
+	{0x0005, 6},		// 8
+	{0x0004, 6},
+	{0x0004, 7},
+	{0x0005, 7},
+	{0x0007, 7},
+	{0x0004, 8},
+	{0x0007, 8},
+	{0x0018, 9},
+	{0x0017, 10},		// 16
+	{0x0018, 10},
+	{0x0008, 10},
+	{0x0067, 11},
+	{0x0068, 11},
+	{0x006C, 11},
+	{0x0037, 11},
+	{0x0028, 11},
+	{0x0017, 11},		// 24
+	{0x0018, 11},
+	{0x00CA, 12},
+	{0x00CB, 12},
+	{0x00CC, 12},
+	{0x00CD, 12},
+	{0x0068, 12},
+	{0x0069, 12},
+	{0x006A, 12},		// 32
+	{0x006B, 12},
+	{0x00D2, 12},
+	{0x00D3, 12},
+	{0x00D4, 12},
+	{0x00D5, 12},
+	{0x00D6, 12},
+	{0x00D7, 12},
+	{0x006C, 12},		// 40
+	{0x006D, 12},
+	{0x00DA, 12},
+	{0x00DB, 12},
+	{0x0054, 12},
+	{0x0055, 12},
+	{0x0056, 12},
+	{0x0057, 12},
+	{0x0064, 12},		// 48
+	{0x0065, 12},
+	{0x0052, 12},
+	{0x0053, 12},
+	{0x0024, 12},
+	{0x0037, 12},
+	{0x0038, 12},
+	{0x0027, 12},
+	{0x0028, 12},		// 56
+	{0x0058, 12},
+	{0x0059, 12},
+	{0x002B, 12},
+	{0x002C, 12},
+	{0x005A, 12},
+	{0x0066, 12},
+	{0x0067, 12},
+	{0x000F, 10},		// Make up codes: 64
+	{0x00C8, 12},		// 128
+	{0x00C9, 12},		// 192
+	{0x005B, 12},		// 256
+	{0x0033, 12},		// 320
+	{0x0034, 12},		// 384
+	{0x0035, 12},		// 448
+	{0x006C, 13},		// 512
+	{0x006D, 13},		// 576
+	{0x004A, 13},		// 640
+	{0x004B, 13},		// 704
+	{0x004C, 13},		// 768
+	{0x004D, 13},		// 832
+	{0x0072, 13},		// 896
+	{0x0073, 13},		// 960
+	{0x0074, 13},		// 1024
+	{0x0075, 13},		// 1088
+	{0x0076, 13},		// 1152
+	{0x0077, 13},		// 1216
+	{0x0052, 13},		// 1280
+	{0x0053, 13},		// 1344
+	{0x0054, 13},		// 1408
+	{0x0055, 13},		// 1472
+	{0x005A, 13},		// 1536
+	{0x005B, 13},		// 1600
+	{0x0064, 13},		// 1664
+	{0x0065, 13},		// 1728
+    };
+    if ( len >= 64 ) {
+	int index = 63 + (len >> 6);
+	writeG3Code( blackCodes[index].code, blackCodes[index].bits );
+	len &= 63;
+    }
+    writeG3Code( blackCodes[len].code, blackCodes[len].bits );
+}
+
+void QtopiaPrintEnginePrivate::writeG3EOL()
+{
+    int bitToPad;
+    if ( partialBits <= 4 ) {
+        bitToPad = 4 - partialBits;
+    } else {
+        bitToPad = 8 - partialBits + 4;
+    }
+
+    partialByte = ((partialByte << (bitToPad + 12)) | 0x0001);
+    partialBits += bitToPad + 12;
+
+    while ( partialBits >= 8 ) {
+        partialBits -= 8;
+        buffer.append( (char)(partialByte >> partialBits ) );
+    }
+//    writeG3Code( 0x0001, 12 );
+}
+
+void QtopiaPrintBuffer::append( short value )
+{
+    if ( _bigEndian ) {
+	_data.append( (char)(value >> 8) );
+	_data.append( (char)value );
+    } else {
+	_data.append( (char)value );
+	_data.append( (char)(value >> 8) );
+    }
+}
+
+void QtopiaPrintBuffer::append( int value )
+{
+    if ( _bigEndian ) {
+	_data.append( (char)(value >> 24) );
+	_data.append( (char)(value >> 16) );
+	_data.append( (char)(value >> 8) );
+	_data.append( (char)value );
+    } else {
+	_data.append( (char)value );
+	_data.append( (char)(value >> 8) );
+	_data.append( (char)(value >> 16) );
+	_data.append( (char)(value >> 24) );
+    }
+}
+
+void QtopiaPrintBuffer::patch( int posn, int value )
+{
+    if ( _bigEndian ) {
+	_data[posn]     = (char)(value >> 24);
+	_data[posn + 1] = (char)(value >> 16);
+	_data[posn + 2] = (char)(value >> 8);
+	_data[posn + 3] = (char)value;
+    } else {
+        _data[posn]     = (char)value;
+	_data[posn + 1] = (char)(value >> 8);
+	_data[posn + 2] = (char)(value >> 16);
+	_data[posn + 3] = (char)(value >> 24);
+    }
+}
+
+void QtopiaPrintBuffer::pad()
+{
+    while ( ( _data.size() % 4 ) != 0 )
+	_data.append( (char)0 );
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_PRINTER