1 /****************************************************************************

     2 **

     3 ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

     4 ** All rights reserved.

     5 ** Contact: Nokia Corporation (qt-info@nokia.com)

     6 **

     7 ** This file is part of the Qt Mobility Components.

     8 **

     9 ** $QT_BEGIN_LICENSE:LGPL$

    10 ** No Commercial Usage

    11 ** This file contains pre-release code and may not be distributed.

    12 ** You may use this file in accordance with the terms and conditions

    13 ** contained in the Technology Preview License Agreement accompanying

    14 ** this package.

    15 **

    16 ** GNU Lesser General Public License Usage

    17 ** Alternatively, this file may be used under the terms of the GNU Lesser

    18 ** General Public License version 2.1 as published by the Free Software

    19 ** Foundation and appearing in the file LICENSE.LGPL included in the

    20 ** packaging of this file.  Please review the following information to

    21 ** ensure the GNU Lesser General Public License version 2.1 requirements

    22 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

    23 **

    24 ** In addition, as a special exception, Nokia gives you certain additional

    25 ** rights.  These rights are described in the Nokia Qt LGPL Exception

    26 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

    27 **

    28 ** If you have questions regarding the use of this file, please contact

    29 ** Nokia at qt-info@nokia.com.

    30 **

    31 **

    32 **

    33 **

    34 **

    35 **

    36 **

    37 **

    38 ** $QT_END_LICENSE$

    39 **

    40 ****************************************************************************/

    41 

    42 #include <qmobilityglobal.h>

    43 #include "qnetworksession_s60_p.h"

    44 #include "qnetworkconfiguration_s60_p.h"

    45 #include "qnetworkconfigmanager_s60_p.h"

    46 #include <es_enum.h>

    47 #include <es_sock.h>

    48 #include <in_sock.h>

    49 #include <stdapis/sys/socket.h>

    50 #include <stdapis/net/if.h>

    51 

    52 QTM_BEGIN_NAMESPACE

    53 

    54 QNetworkSessionPrivate::QNetworkSessionPrivate()

    55     : CActive(CActive::EPriorityUserInput), state(QNetworkSession::Invalid),

    56       isOpen(false), iDynamicUnSetdefaultif(0), ipConnectionNotifier(0),

    57       iHandleStateNotificationsFromManager(false), iFirstSync(true), iStoppedByUser(false),

    58       iClosedByUser(false), iError(QNetworkSession::UnknownSessionError), iALREnabled(0),

    59       iConnectInBackground(false), isOpening(false)

    60 {

    61     CActiveScheduler::Add(this);

    62 

    63 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

    64     iMobility = NULL;

    65 #endif

    66     // Try to load "Open C" dll dynamically and

    67     // try to attach to unsetdefaultif function dynamically.

    68     // This is to avoid build breaks with old OpenC versions.

    69     if (iOpenCLibrary.Load(_L("libc")) == KErrNone) {

    70         iDynamicUnSetdefaultif = (TOpenCUnSetdefaultifFunction)iOpenCLibrary.Lookup(597);

    71     }

    72 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

    73     qDebug() << "QNS this : " << QString::number((uint)this) << " - ";

    74     if (iDynamicUnSetdefaultif)

    75         qDebug() << "dynamic unsetdefaultif() is present in PIPS library. ";

    76     else

    77         qDebug() << "dynamic unsetdefaultif() not present in PIPS library. ";

    78 #endif

    79 

    80     TRAP_IGNORE(iConnectionMonitor.ConnectL());

    81 }

    82 

    83 QNetworkSessionPrivate::~QNetworkSessionPrivate()

    84 {

    85     isOpen = false;

    86     isOpening = false;

    87 

    88     // Cancel Connection Progress Notifications first.

    89     // Note: ConnectionNotifier must be destroyed before Canceling RConnection::Start()

    90     //       => deleting ipConnectionNotifier results RConnection::CancelProgressNotification()

    91     delete ipConnectionNotifier;

    92     ipConnectionNotifier = NULL;

    93 

    94 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

    95     if (iMobility) {

    96         delete iMobility;

    97         iMobility = NULL;

    98     }

    99 #endif

   100 

   101     // Cancel possible RConnection::Start()

   102     Cancel();

   103     iSocketServ.Close();

   104     

   105     // Close global 'Open C' RConnection

   106     // Clears also possible unsetdefaultif() flags.

   107     setdefaultif(0);

   108     

   109     iConnectionMonitor.Close();

   110     iOpenCLibrary.Close();

   111 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   112     qDebug() << "QNS this : " << QString::number((uint)this) << " - destroyed (and setdefaultif(0))";

   113 #endif

   114 }

   115 

   116 void QNetworkSessionPrivate::configurationStateChanged(TUint32 accessPointId, TUint32 connMonId, QNetworkSession::State newState)

   117 {

   118     if (iHandleStateNotificationsFromManager) {

   119 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   120         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   121                  << "configurationStateChanged from manager for IAP : " << QString::number(accessPointId)

   122                  << "connMon ID : " << QString::number(connMonId) << " : to a state: " << newState

   123                  << "whereas my current state is: " << state;

   124 #else

   125       Q_UNUSED(connMonId);

   126 #endif

   127         this->newState(newState, accessPointId);

   128     }

   129 }

   130 

   131 void QNetworkSessionPrivate::configurationRemoved(const QNetworkConfiguration& config)

   132 {

   133     if (!publicConfig.d.data()) {

   134         return;

   135     }

   136     if (config.d.data()->numericId == publicConfig.d.data()->numericId) {

   137 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   138         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   139                  << "configurationRemoved IAP: " << QString::number(publicConfig.d.data()->numericId) << " : going to State: Invalid";

   140 #endif

   141         this->newState(QNetworkSession::Invalid, publicConfig.d.data()->numericId);

   142     }

   143 }

   144 

   145 void QNetworkSessionPrivate::configurationAdded(const QNetworkConfiguration& config)

   146 {

   147     Q_UNUSED(config);

   148     // If session is based on service network, some other app may create new access points

   149     // to the SNAP --> synchronize session's state with that of interface's.

   150     if (!publicConfig.d.data() || publicConfig.type() != QNetworkConfiguration::ServiceNetwork) {

   151         return;

   152     }

   153 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   154         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   155                  << "configurationAdded IAP: " << QString::number(config.d.data()->numericId);

   156 #endif

   157         syncStateWithInterface();

   158 }

   159 

   160 // Function sets the state of the session to match the state

   161 // of the underlying interface (the configuration this session is based on)

   162 void QNetworkSessionPrivate::syncStateWithInterface()

   163 {

   164     if (!publicConfig.d || !publicConfig.d.data()) {

   165         return;

   166     }

   167     if (iFirstSync) {

   168         QObject::connect(((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager), SIGNAL(configurationStateChanged(TUint32, TUint32, QNetworkSession::State)),

   169                          this, SLOT(configurationStateChanged(TUint32, TUint32, QNetworkSession::State)));

   170         // Listen to configuration removals, so that in case the configuration

   171         // this session is based on is removed, session knows to enter Invalid -state.

   172         QObject::connect(((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager),

   173                          SIGNAL(configurationRemoved(QNetworkConfiguration)),

   174                          this, SLOT(configurationRemoved(QNetworkConfiguration)));

   175         // Connect to configuration additions, so that in case a configuration is added

   176         // in a SNAP this session is based on, the session knows to synch its state with its

   177         // interface.

   178         QObject::connect(((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager),

   179                          SIGNAL(configurationAdded(QNetworkConfiguration)),

   180                          this, SLOT(configurationAdded(QNetworkConfiguration)));

   181     }

   182     // Start listening IAP state changes from QNetworkConfigurationManagerPrivate

   183     iHandleStateNotificationsFromManager = true;    

   184 

   185     // Check what is the state of the configuration this session is based on

   186     // and set the session in appropriate state.

   187 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   188     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   189              << "syncStateWithInterface() state of publicConfig is: " << publicConfig.d.data()->state;

   190 #endif

   191     switch (publicConfig.d.data()->state) {

   192     case QNetworkConfiguration::Active:

   193         newState(QNetworkSession::Connected);

   194         break;

   195     case QNetworkConfiguration::Discovered:

   196         newState(QNetworkSession::Disconnected);

   197         break;

   198     case QNetworkConfiguration::Defined:

   199         newState(QNetworkSession::NotAvailable);

   200         break;

   201     case QNetworkConfiguration::Undefined:

   202     default:

   203         newState(QNetworkSession::Invalid);

   204     }

   205 }

   206 

   207 QNetworkInterface QNetworkSessionPrivate::interface(TUint iapId) const

   208 {

   209     QString interfaceName;

   210 

   211     TSoInetInterfaceInfo ifinfo;

   212     TPckg<TSoInetInterfaceInfo> ifinfopkg(ifinfo);

   213     TSoInetIfQuery ifquery;

   214     TPckg<TSoInetIfQuery> ifquerypkg(ifquery);

   215  

   216     // Open dummy socket for interface queries

   217     RSocket socket;

   218     TInt retVal = socket.Open(iSocketServ, _L("udp"));

   219     if (retVal != KErrNone) {

   220         return QNetworkInterface();

   221     }

   222  

   223     // Start enumerating interfaces

   224     socket.SetOpt(KSoInetEnumInterfaces, KSolInetIfCtrl);

   225     while(socket.GetOpt(KSoInetNextInterface, KSolInetIfCtrl, ifinfopkg) == KErrNone) {

   226         ifquery.iName = ifinfo.iName;

   227         TInt err = socket.GetOpt(KSoInetIfQueryByName, KSolInetIfQuery, ifquerypkg);

   228         if(err == KErrNone && ifquery.iZone[1] == iapId) { // IAP ID is index 1 of iZone

   229             if(ifinfo.iAddress.Address() > 0) {

   230                 interfaceName = QString::fromUtf16(ifinfo.iName.Ptr(),ifinfo.iName.Length());

   231                 break;

   232             }

   233         }

   234     }

   235  

   236     socket.Close();

   237  

   238     if (interfaceName.isEmpty()) {

   239         return QNetworkInterface();

   240     }

   241  

   242     return QNetworkInterface::interfaceFromName(interfaceName);

   243 }

   244 

   245 QNetworkInterface QNetworkSessionPrivate::currentInterface() const

   246 {

   247 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   248     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   249              << "currentInterface() requested, state: " << state

   250              << "publicConfig validity: " << publicConfig.isValid();

   251     if (activeInterface.isValid())

   252         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   253                  << "interface is: " << activeInterface.humanReadableName();

   254 #endif

   255 

   256     if (!publicConfig.isValid() || state != QNetworkSession::Connected) {

   257         return QNetworkInterface();

   258     }

   259     

   260     return activeInterface;

   261 }

   262 

   263 QVariant QNetworkSessionPrivate::sessionProperty(const QString& key) const

   264 {

   265     if (key == "ConnectInBackground") {

   266         return QVariant(iConnectInBackground);

   267     }

   268     return QVariant();

   269 }

   270 

   271 void QNetworkSessionPrivate::setSessionProperty(const QString& key, const QVariant& value)

   272 {

   273     // Valid value means adding property, invalid means removing it.

   274     if (key == "ConnectInBackground") {

   275         if (value.isValid()) {

   276             iConnectInBackground = value.toBool();

   277         } else {

   278             iConnectInBackground = EFalse;

   279         }

   280     }

   281 }

   282 

   283 QString QNetworkSessionPrivate::errorString() const

   284 {

   285     switch (iError) {

   286     case QNetworkSession::UnknownSessionError:

   287         return tr("Unknown session error.");

   288     case QNetworkSession::SessionAbortedError:

   289         return tr("The session was aborted by the user or system.");

   290     case QNetworkSession::OperationNotSupportedError:

   291         return tr("The requested operation is not supported by the system.");

   292     case QNetworkSession::InvalidConfigurationError:

   293         return tr("The specified configuration cannot be used.");

   294     case QNetworkSession::RoamingError:

   295         return tr("Roaming was aborted or is not possible.");

   296     }

   297  

   298     return QString();

   299 }

   300 

   301 QNetworkSession::SessionError QNetworkSessionPrivate::error() const

   302 {

   303     return iError;

   304 }

   305 

   306 void QNetworkSessionPrivate::open()

   307 {

   308 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   309         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   310                 << "open() called, session state is: " << state << " and isOpen is: "

   311                 << isOpen;

   312 #endif

   313     if (isOpen || isOpening)

   314         return;

   315     

   316     isOpening = true;

   317 

   318     // Stop handling IAP state change signals from QNetworkConfigurationManagerPrivate

   319     // => RConnection::ProgressNotification will be used for IAP/SNAP monitoring

   320     iHandleStateNotificationsFromManager = false;

   321 

   322     // Configuration may have been invalidated after session creation by platform

   323     // (e.g. configuration has been deleted).

   324     if (!publicConfig.isValid()) {

   325         newState(QNetworkSession::Invalid);

   326         iError = QNetworkSession::InvalidConfigurationError;

   327         emit q->error(iError);

   328         return;

   329     }

   330     // If opening a undefined configuration, session emits error and enters

   331     // NotAvailable -state. Note that we will try ones in 'defined' state to avoid excessive

   332     // need for WLAN scans (via updateConfigurations()), because user may have walked

   333     // into a WLAN range, but periodic background scan has not occurred yet -->

   334     // we don't want to force application to make frequent updateConfigurations() calls

   335     // to be able to try if e.g. home WLAN is available.

   336     if (publicConfig.state() == QNetworkConfiguration::Undefined) {

   337         newState(QNetworkSession::NotAvailable);

   338         iError = QNetworkSession::InvalidConfigurationError;

   339         emit q->error(iError);

   340         return;

   341     }

   342     // Clear possible previous states

   343     iStoppedByUser = false;

   344     iClosedByUser = false;

   345 

   346     TInt error = iSocketServ.Connect();

   347     if (error != KErrNone) {

   348         // Could not open RSocketServ

   349         newState(QNetworkSession::Invalid);

   350         iError = QNetworkSession::UnknownSessionError;

   351         emit q->error(iError);

   352         syncStateWithInterface();    

   353         return;

   354     }

   355     

   356     error = iConnection.Open(iSocketServ);

   357     if (error != KErrNone) {

   358         // Could not open RConnection

   359         iSocketServ.Close();

   360         newState(QNetworkSession::Invalid);

   361         iError = QNetworkSession::UnknownSessionError;

   362         emit q->error(iError);

   363         syncStateWithInterface();    

   364         return;

   365     }

   366     

   367     // Use RConnection::ProgressNotification for IAP/SNAP monitoring

   368     // (<=> ConnectionProgressNotifier uses RConnection::ProgressNotification)

   369     if (!ipConnectionNotifier) {

   370         ipConnectionNotifier = new ConnectionProgressNotifier(*this,iConnection);

   371     }

   372     if (ipConnectionNotifier) {

   373         ipConnectionNotifier->StartNotifications();

   374     }

   375     

   376     if (publicConfig.type() == QNetworkConfiguration::InternetAccessPoint) {

   377 #if defined(OCC_FUNCTIONALITY_AVAILABLE) && defined(SNAP_FUNCTIONALITY_AVAILABLE)

   378             // With One Click Connectivity (Symbian^3 onwards) it is possible

   379             // to connect silently, without any popups.

   380             TConnPrefList pref;

   381             TExtendedConnPref prefs;

   382             prefs.SetIapId(publicConfig.d.data()->numericId);

   383             if (iConnectInBackground) {

   384                 prefs.SetNoteBehaviour( TExtendedConnPref::ENoteBehaviourConnSilent );

   385             }

   386             pref.AppendL(&prefs);

   387 #else

   388             TCommDbConnPref pref;

   389             pref.SetDialogPreference(ECommDbDialogPrefDoNotPrompt);

   390             pref.SetIapId(publicConfig.d.data()->numericId);

   391 #endif

   392             iConnection.Start(pref, iStatus);

   393             if (!IsActive()) {

   394                 SetActive();

   395             }

   396             // Avoid flip flop of states if the configuration is already

   397             // active. IsOpen/opened() will indicate when ready.

   398             if (state != QNetworkSession::Connected) {

   399                 newState(QNetworkSession::Connecting);

   400             }

   401     } else if (publicConfig.type() == QNetworkConfiguration::ServiceNetwork) {

   402 #if defined(OCC_FUNCTIONALITY_AVAILABLE) && defined(SNAP_FUNCTIONALITY_AVAILABLE)

   403         // On Symbian^3 if service network is not reachable, it triggers a UI (aka EasyWLAN) where

   404         // user can create new IAPs. To detect this, we need to store the number of IAPs

   405         // there was before connection was started.

   406         iKnownConfigsBeforeConnectionStart = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.keys();

   407         TConnPrefList snapPref;

   408         TExtendedConnPref prefs;

   409         prefs.SetSnapId(publicConfig.d.data()->numericId);

   410         if (iConnectInBackground) {

   411             prefs.SetNoteBehaviour( TExtendedConnPref::ENoteBehaviourConnSilent );

   412         }

   413         snapPref.AppendL(&prefs);

   414 #else

   415         TConnSnapPref snapPref(publicConfig.d.data()->numericId);

   416 #endif

   417         iConnection.Start(snapPref, iStatus);

   418         if (!IsActive()) {

   419             SetActive();

   420         }

   421         // Avoid flip flop of states if the configuration is already

   422         // active. IsOpen/opened() will indicate when ready.

   423         if (state != QNetworkSession::Connected) {

   424             newState(QNetworkSession::Connecting);

   425         }

   426     } else if (publicConfig.type() == QNetworkConfiguration::UserChoice) {

   427         iKnownConfigsBeforeConnectionStart = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.keys();

   428         iConnection.Start(iStatus);

   429         if (!IsActive()) {

   430             SetActive();

   431         }

   432         newState(QNetworkSession::Connecting);

   433     }

   434  

   435     if (error != KErrNone) {

   436         isOpen = false;

   437         isOpening = false;

   438         iError = QNetworkSession::UnknownSessionError;

   439         emit q->error(iError);

   440         if (ipConnectionNotifier) {

   441             ipConnectionNotifier->StopNotifications();

   442         }

   443         syncStateWithInterface();    

   444     }

   445 }

   446 

   447 TUint QNetworkSessionPrivate::iapClientCount(TUint aIAPId) const

   448 {

   449     TRequestStatus status;

   450     TUint connectionCount;

   451     iConnectionMonitor.GetConnectionCount(connectionCount, status);

   452     User::WaitForRequest(status);

   453     if (status.Int() == KErrNone) {

   454         for (TUint i = 1; i <= connectionCount; i++) {

   455             TUint connectionId;

   456             TUint subConnectionCount;

   457             iConnectionMonitor.GetConnectionInfo(i, connectionId, subConnectionCount);

   458             TUint apId;

   459             iConnectionMonitor.GetUintAttribute(connectionId, subConnectionCount, KIAPId, apId, status);

   460             User::WaitForRequest(status);

   461             if (apId == aIAPId) {

   462                 TConnMonClientEnumBuf buf;

   463                 iConnectionMonitor.GetPckgAttribute(connectionId, 0, KClientInfo, buf, status);

   464                 User::WaitForRequest(status);

   465                 if (status.Int() == KErrNone) {

   466                     return buf().iCount;

   467                 }

   468             }

   469         }

   470     }

   471     return 0;

   472 }

   473 

   474 void QNetworkSessionPrivate::close(bool allowSignals)

   475 {

   476 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   477     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   478             << "close() called, session state is: " << state << " and isOpen is : "

   479             << isOpen;

   480 #endif

   481 

   482     if (!isOpen && state != QNetworkSession::Connecting) {

   483         return;

   484     }

   485     // Mark this session as closed-by-user so that we are able to report

   486     // distinguish between stop() and close() state transitions

   487     // when reporting.

   488     iClosedByUser = true;

   489     isOpen = false;

   490     isOpening = false;

   491 

   492     serviceConfig = QNetworkConfiguration();

   493     

   494 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   495     if (iMobility) {

   496         delete iMobility;

   497         iMobility = NULL;

   498     }

   499 #endif

   500 

   501     if (ipConnectionNotifier && !iHandleStateNotificationsFromManager) {

   502         ipConnectionNotifier->StopNotifications();

   503         // Start handling IAP state change signals from QNetworkConfigurationManagerPrivate

   504         iHandleStateNotificationsFromManager = true;

   505     }

   506     

   507     Cancel(); // closes iConnection

   508     iSocketServ.Close();

   509     

   510     // Close global 'Open C' RConnection. If OpenC supports,

   511     // close the defaultif for good to avoid difficult timing

   512     // and bouncing issues of network going immediately back up

   513     //  because of e.g. select() thread etc.

   514     if (iDynamicUnSetdefaultif) {

   515         iDynamicUnSetdefaultif();

   516     } else {

   517         setdefaultif(0);

   518     }

   519 

   520     // If UserChoice, go down immediately. If some other configuration,

   521     // go down immediately if there is no reports expected from the platform;

   522     // in practice Connection Monitor is aware of connections only after

   523     // KFinishedSelection event, and hence reports only after that event, but

   524     // that does not seem to be trusted on all Symbian versions --> safest

   525     // to go down.

   526     if (publicConfig.type() == QNetworkConfiguration::UserChoice || state == QNetworkSession::Connecting) {

   527 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   528         qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   529                  << "going disconnected right away, since either UserChoice or Connecting";

   530 #endif

   531         newState(QNetworkSession::Closing);

   532         newState(QNetworkSession::Disconnected);

   533     }

   534     if (allowSignals) {

   535         emit q->closed();

   536     }

   537 }

   538 

   539 void QNetworkSessionPrivate::stop()

   540 {

   541 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   542     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   543             << "stop() called, session state is: " << state << " and isOpen is : "

   544             << isOpen;

   545 #endif

   546     if (!isOpen &&

   547         publicConfig.isValid() &&

   548         publicConfig.type() == QNetworkConfiguration::InternetAccessPoint) {

   549 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   550     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   551             << "since session is not open, using RConnectionMonitor to stop() the interface";

   552 #endif

   553         iStoppedByUser = true;

   554         // If the publicConfig is type of IAP, enumerate through connections at

   555         // connection monitor. If publicConfig is active in that list, stop it.

   556         // Otherwise there is nothing to stop. Note: because this QNetworkSession is not open,

   557         // activeConfig is not usable.

   558         TUint count;

   559         TRequestStatus status;

   560         iConnectionMonitor.GetConnectionCount(count, status);

   561         User::WaitForRequest(status);

   562         if (status.Int() != KErrNone) {

   563             return;

   564         }

   565         TUint numSubConnections; // Not used but needed by GetConnectionInfo i/f

   566         TUint connectionId;

   567         for (TUint i = 1; i <= count; ++i) {

   568             // Get (connection monitor's assigned) connection ID

   569             TInt ret = iConnectionMonitor.GetConnectionInfo(i, connectionId, numSubConnections);            

   570             if (ret == KErrNone) {

   571                 // See if connection Id matches with our Id. If so, stop() it.

   572                 if (publicConfig.d.data()->connectionId == connectionId) {

   573                     ret = iConnectionMonitor.SetBoolAttribute(connectionId,

   574                                                               0, // subConnectionId don't care

   575                                                               KConnectionStop,

   576                                                               ETrue);

   577                 }

   578             }

   579             // Enter disconnected state right away since the session is not even open.

   580             // Symbian^3 connection monitor does not emit KLinkLayerClosed when

   581             // connection is stopped via connection monitor.

   582             newState(QNetworkSession::Disconnected);

   583         }

   584     } else if (isOpen) {

   585 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   586     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   587             << "since session is open, using RConnection to stop() the interface";

   588 #endif

   589         // Since we are open, use RConnection to stop the interface

   590         isOpen = false;

   591         isOpening = false;

   592         iStoppedByUser = true;

   593         newState(QNetworkSession::Closing);

   594         if (ipConnectionNotifier) {

   595             ipConnectionNotifier->StopNotifications();

   596             // Start handling IAP state change signals from QNetworkConfigurationManagerPrivate

   597             iHandleStateNotificationsFromManager = true;

   598         }

   599         iConnection.Stop(RConnection::EStopAuthoritative);

   600         isOpen = true;

   601         isOpening = false;

   602         close(false);

   603         emit q->closed();

   604     }

   605 }

   606 

   607 void QNetworkSessionPrivate::migrate()

   608 {

   609 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   610     if (iMobility) {

   611         // Close global 'Open C' RConnection. If openC supports, use the 'heavy'

   612         // version to block all subsequent requests.

   613         if (iDynamicUnSetdefaultif) {

   614             iDynamicUnSetdefaultif();

   615         } else {

   616             setdefaultif(0);

   617         }

   618         // Start migrating to new IAP

   619         iMobility->MigrateToPreferredCarrier();

   620     }

   621 #endif

   622 }

   623 

   624 void QNetworkSessionPrivate::ignore()

   625 {

   626 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   627     if (iMobility) {

   628         iMobility->IgnorePreferredCarrier();

   629 

   630         if (!iALRUpgradingConnection) {

   631             newState(QNetworkSession::Disconnected);

   632         } else {

   633             newState(QNetworkSession::Connected,iOldRoamingIap);

   634         }

   635     }

   636 #endif

   637 }

   638 

   639 void QNetworkSessionPrivate::accept()

   640 {

   641 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   642     if (iMobility) {

   643         iMobility->NewCarrierAccepted();

   644 

   645         QNetworkConfiguration newActiveConfig = activeConfiguration(iNewRoamingIap);

   646 

   647         // Use name of the new IAP to open global 'Open C' RConnection

   648         QByteArray nameAsByteArray = newActiveConfig.name().toUtf8();

   649         ifreq ifr;

   650         memset(&ifr, 0, sizeof(struct ifreq));

   651         strcpy(ifr.ifr_name, nameAsByteArray.constData());

   652         setdefaultif(&ifr);

   653 

   654         newState(QNetworkSession::Connected, iNewRoamingIap);

   655     }

   656 #endif

   657 }

   658 

   659 void QNetworkSessionPrivate::reject()

   660 {

   661 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   662     if (iMobility) {

   663         iMobility->NewCarrierRejected();

   664 

   665         if (!iALRUpgradingConnection) {

   666             newState(QNetworkSession::Disconnected);

   667         } else {

   668             QNetworkConfiguration newActiveConfig = activeConfiguration(iOldRoamingIap);

   669 

   670             // Use name of the old IAP to open global 'Open C' RConnection

   671             QByteArray nameAsByteArray = newActiveConfig.name().toUtf8();

   672             ifreq ifr;

   673             memset(&ifr, 0, sizeof(struct ifreq));

   674             strcpy(ifr.ifr_name, nameAsByteArray.constData());

   675             setdefaultif(&ifr);

   676 

   677             newState(QNetworkSession::Connected, iOldRoamingIap);

   678         }

   679     }

   680 #endif

   681 }

   682 

   683 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   684 void QNetworkSessionPrivate::PreferredCarrierAvailable(TAccessPointInfo aOldAPInfo,

   685                                                        TAccessPointInfo aNewAPInfo,

   686                                                        TBool aIsUpgrade,

   687                                                        TBool aIsSeamless)

   688 {

   689     iOldRoamingIap = aOldAPInfo.AccessPoint();

   690     iNewRoamingIap = aNewAPInfo.AccessPoint();

   691     newState(QNetworkSession::Roaming);

   692     if (iALREnabled > 0) {

   693         iALRUpgradingConnection = aIsUpgrade;

   694         QList<QNetworkConfiguration> configs = publicConfig.children();

   695         for (int i=0; i < configs.count(); i++) {

   696             if (configs[i].d.data()->numericId == aNewAPInfo.AccessPoint()) {

   697                 // Any slot connected to the signal might throw an std::exception,

   698                 // which must not propagate into Symbian code (this function is a callback

   699                 // from platform). We could convert exception to a symbian Leave, but since the

   700                 // prototype of this function bans this (no trailing 'L'), we just catch

   701                 // and drop.

   702                 QT_TRY {

   703                     emit q->preferredConfigurationChanged(configs[i],aIsSeamless);

   704                 }

   705                 QT_CATCH (std::exception&) {}

   706             }

   707         }

   708     } else {

   709         migrate();

   710     }

   711 }

   712 

   713 void QNetworkSessionPrivate::NewCarrierActive(TAccessPointInfo /*aNewAPInfo*/, TBool /*aIsSeamless*/)

   714 {

   715     if (iALREnabled > 0) {

   716         QT_TRY {

   717             emit q->newConfigurationActivated();

   718         }

   719         QT_CATCH (std::exception&) {}

   720     } else {

   721         accept();

   722     }

   723 }

   724 

   725 void QNetworkSessionPrivate::Error(TInt /*aError*/)

   726 {

   727 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   728     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   729             << "roaming Error() occured, isOpen is: " << isOpen;

   730 #endif

   731     if (isOpen) {

   732         isOpen = false;

   733         isOpening = false;

   734         activeConfig = QNetworkConfiguration();

   735         serviceConfig = QNetworkConfiguration();

   736         iError = QNetworkSession::RoamingError;

   737         emit q->error(iError);

   738         Cancel();

   739         if (ipConnectionNotifier) {

   740             ipConnectionNotifier->StopNotifications();

   741         }

   742         QT_TRY {

   743             syncStateWithInterface();

   744             // In some cases IAP is still in Connected state when

   745             // syncStateWithInterface(); is called

   746             // => Following call makes sure that Session state

   747             //    changes immediately to Disconnected.

   748             newState(QNetworkSession::Disconnected);

   749             emit q->closed();

   750         }

   751         QT_CATCH (std::exception&) {}

   752     } else if (iStoppedByUser) {

   753         // If the user of this session has called the stop() and

   754         // configuration is based on internet SNAP, this needs to be

   755         // done here because platform might roam.

   756         QT_TRY {

   757             newState(QNetworkSession::Disconnected);

   758         }

   759         QT_CATCH (std::exception&) {}

   760     }

   761 }

   762 #endif

   763 

   764 void QNetworkSessionPrivate::setALREnabled(bool enabled)

   765 {

   766     if (enabled) {

   767         iALREnabled++;

   768     } else {

   769         iALREnabled--;

   770     }

   771 }

   772 

   773 QNetworkConfiguration QNetworkSessionPrivate::bestConfigFromSNAP(const QNetworkConfiguration& snapConfig) const

   774 {

   775     QNetworkConfiguration config;

   776     QList<QNetworkConfiguration> subConfigurations = snapConfig.children();

   777     for (int i = 0; i < subConfigurations.count(); i++ ) {

   778         if (subConfigurations[i].state() == QNetworkConfiguration::Active) {

   779             config = subConfigurations[i];

   780             break;

   781         } else if (!config.isValid() && subConfigurations[i].state() == QNetworkConfiguration::Discovered) {

   782             config = subConfigurations[i];

   783         }

   784     }

   785     if (!config.isValid() && subConfigurations.count() > 0) {

   786         config = subConfigurations[0];

   787     }

   788     return config;

   789 }

   790 

   791 quint64 QNetworkSessionPrivate::bytesWritten() const

   792 {

   793     return transferredData(KUplinkData);

   794 }

   795 

   796 quint64 QNetworkSessionPrivate::bytesReceived() const

   797 {

   798     return transferredData(KDownlinkData);

   799 }

   800 

   801 quint64 QNetworkSessionPrivate::transferredData(TUint dataType) const

   802 {

   803     if (!publicConfig.isValid()) {

   804         return 0;

   805     }

   806     

   807     QNetworkConfiguration config;

   808     if (publicConfig.type() == QNetworkConfiguration::UserChoice) {

   809         if (serviceConfig.isValid()) {

   810             config = serviceConfig;

   811         } else {

   812             if (activeConfig.isValid()) {

   813                 config = activeConfig;

   814             }

   815         }

   816     } else {

   817         config = publicConfig;

   818     }

   819 

   820     if (!config.isValid()) {

   821         return 0;

   822     }

   823     

   824     TUint count;

   825     TRequestStatus status;

   826     iConnectionMonitor.GetConnectionCount(count, status);

   827     User::WaitForRequest(status);

   828     if (status.Int() != KErrNone) {

   829         return 0;

   830     }

   831     

   832     TUint transferredData = 0;

   833     TUint numSubConnections;

   834     TUint connectionId;

   835     bool configFound;

   836     for (TUint i = 1; i <= count; i++) {

   837         TInt ret = iConnectionMonitor.GetConnectionInfo(i, connectionId, numSubConnections);

   838         if (ret == KErrNone) {

   839             TUint apId;

   840             iConnectionMonitor.GetUintAttribute(connectionId, 0, KIAPId, apId, status);

   841             User::WaitForRequest(status);

   842             if (status.Int() == KErrNone) {

   843                 configFound = false;

   844                 if (config.type() == QNetworkConfiguration::ServiceNetwork) {

   845                     QList<QNetworkConfiguration> configs = config.children();

   846                     for (int i=0; i < configs.count(); i++) {

   847                         if (configs[i].d.data()->numericId == apId) {

   848                             configFound = true;

   849                             break;

   850                         }

   851                     }

   852                 } else if (config.d.data()->numericId == apId) {

   853                     configFound = true;

   854                 }

   855                 if (configFound) {

   856                     TUint tData;

   857                     iConnectionMonitor.GetUintAttribute(connectionId, 0, dataType, tData, status );

   858                     User::WaitForRequest(status);

   859                     if (status.Int() == KErrNone) {

   860                     transferredData += tData;

   861                     }

   862                 }

   863             }

   864         }

   865     }

   866     

   867     return transferredData;

   868 }

   869 

   870 quint64 QNetworkSessionPrivate::activeTime() const

   871 {

   872     if (!isOpen || startTime.isNull()) {

   873         return 0;

   874     }

   875     return startTime.secsTo(QDateTime::currentDateTime());

   876 }

   877 

   878 QNetworkConfiguration QNetworkSessionPrivate::activeConfiguration(TUint32 iapId) const

   879 {

   880     if (iapId == 0) {

   881         _LIT(KSetting, "IAP\\Id");

   882         iConnection.GetIntSetting(KSetting, iapId);

   883 #if defined(OCC_FUNCTIONALITY_AVAILABLE) && defined(SNAP_FUNCTIONALITY_AVAILABLE)

   884         // Check if this is an Easy WLAN configuration. On Symbian^3 RConnection may report

   885         // the used configuration as 'EasyWLAN' IAP ID if someone has just opened the configuration

   886         // from WLAN Scan dialog, _and_ that connection is still up. We need to find the

   887         // real matching configuration. Function alters the Easy WLAN ID to real IAP ID (only if easy WLAN):

   888         ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->easyWlanTrueIapId(iapId);

   889 #endif

   890     }

   891 

   892 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

   893     if (publicConfig.type() == QNetworkConfiguration::ServiceNetwork) {

   894         // Try to search IAP from the used SNAP using IAP Id

   895         QList<QNetworkConfiguration> children = publicConfig.children();

   896         for (int i=0; i < children.count(); i++) {

   897             if (children[i].d.data()->numericId == iapId) {

   898                 return children[i];

   899             }

   900         }

   901 

   902         // Given IAP Id was not found from the used SNAP

   903         // => Try to search matching IAP using mappingName

   904         //    mappingName contains:

   905         //      1. "Access point name" for "Packet data" Bearer

   906         //      2. "WLAN network name" (= SSID) for "Wireless LAN" Bearer

   907         //      3. "Dial-up number" for "Data call Bearer" or "High Speed (GSM)" Bearer

   908         //    <=> Note: It's possible that in this case reported IAP is

   909         //              clone of the one of the IAPs of the used SNAP

   910         //              => If mappingName matches, clone has been found

   911         QNetworkConfiguration pt;

   912         pt.d = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.value(QT_BEARERMGMT_CONFIGURATION_IAP_PREFIX+QString::number(qHash(iapId)));

   913         if (pt.d) {

   914             for (int i=0; i < children.count(); i++) {

   915                 if (children[i].d.data()->mappingName == pt.d.data()->mappingName) {

   916                     return children[i];

   917                 }

   918             }

   919         } else {

   920 #if defined(OCC_FUNCTIONALITY_AVAILABLE) && defined(SNAP_FUNCTIONALITY_AVAILABLE)

   921             // On Symbian^3 (only, not earlier or Symbian^4) if the SNAP was not reachable, it triggers

   922             // user choice type of activity (EasyWLAN). As a result, a new IAP may be created, and

   923             // hence if was not found yet. Therefore update configurations and see if there is something new.

   924             // 1. Update knowledge from the databases.

   925             ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->updateConfigurations();

   926             // 2. Check if new configuration was created during connection creation

   927             QList<QString> knownConfigs = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.keys();

   928 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   929             qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   930                     << "opened configuration was not known beforehand, looking for new.";

   931 #endif

   932             if (knownConfigs.count() > iKnownConfigsBeforeConnectionStart.count()) {

   933                 // Configuration count increased => new configuration was created

   934                 // => Search new, created configuration

   935                 QString newIapId;

   936                 for (int i=0; i < iKnownConfigsBeforeConnectionStart.count(); i++) {

   937                     if (knownConfigs[i] != iKnownConfigsBeforeConnectionStart[i]) {

   938                         newIapId = knownConfigs[i];

   939                         break;

   940                     }

   941                 }

   942                 if (newIapId.isEmpty()) {

   943                     newIapId = knownConfigs[knownConfigs.count()-1];

   944                 }

   945                 pt.d = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.value(newIapId);

   946                 if (pt.d) {

   947 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   948                     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   949                             << "new configuration was found, name, IAP id: " << pt.name() << pt.identifier();

   950 #endif

   951                     return pt;

   952                 }

   953             }

   954 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

   955             qDebug() << "QNS this : " << QString::number((uint)this) << " - "

   956                     << "configuration was not found, returning invalid.";

   957 #endif

   958 #endif

   959             // Given IAP Id was not found from known IAPs array

   960             return QNetworkConfiguration();

   961         }

   962         // Matching IAP was not found from used SNAP

   963         // => IAP from another SNAP is returned

   964         //    (Note: Returned IAP matches to given IAP Id)

   965         return pt;

   966     }

   967 #endif

   968     if (publicConfig.type() == QNetworkConfiguration::UserChoice) {

   969         if (publicConfig.d.data()->manager) {

   970             QNetworkConfiguration pt;

   971             // Try to found User Selected IAP from known IAPs (accessPointConfigurations)

   972             pt.d = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.value(QT_BEARERMGMT_CONFIGURATION_IAP_PREFIX+QString::number(qHash(iapId)));

   973             if (pt.d) {

   974                 return pt;

   975             } else {

   976                 // Check if new (WLAN) IAP was created in IAP/SNAP dialog

   977                 // 1. Sync internal configurations array to commsdb first

   978                 ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->updateConfigurations();

   979                 // 2. Check if new configuration was created during connection creation

   980                 QList<QString> knownConfigs = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.keys();

   981                 if (knownConfigs.count() > iKnownConfigsBeforeConnectionStart.count()) {

   982                     // Configuration count increased => new configuration was created

   983                     // => Search new, created configuration

   984                     QString newIapId;

   985                     for (int i=0; i < iKnownConfigsBeforeConnectionStart.count(); i++) {

   986                         if (knownConfigs[i] != iKnownConfigsBeforeConnectionStart[i]) {

   987                             newIapId = knownConfigs[i];

   988                             break;

   989                         }

   990                     }

   991                     if (newIapId.isEmpty()) {

   992                         newIapId = knownConfigs[knownConfigs.count()-1];

   993                     }

   994                     pt.d = ((QNetworkConfigurationManagerPrivate*)publicConfig.d.data()->manager)->accessPointConfigurations.value(newIapId);

   995                     if (pt.d) {

   996                         return pt;

   997                     }

   998                 }

   999             }

  1000         }

  1001         return QNetworkConfiguration();

  1002     }

  1003 

  1004     return publicConfig;

  1005 }

  1006 

  1007 void QNetworkSessionPrivate::RunL()

  1008 {

  1009 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

  1010     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

  1011             << "RConnection::RunL with status code: " << iStatus.Int();

  1012 #endif

  1013     TInt statusCode = iStatus.Int();

  1014 

  1015     switch (statusCode) {

  1016         case KErrNone: // Connection created successfully

  1017             {

  1018             TInt error = KErrNone;

  1019             QNetworkConfiguration newActiveConfig = activeConfiguration();

  1020             if (!newActiveConfig.isValid()) {

  1021                 // RConnection startup was successfull but no configuration

  1022                 // was found. That indicates that user has chosen to create a

  1023                 // new WLAN configuration (from scan results), but that new

  1024                 // configuration does not have access to Internet (Internet

  1025                 // Connectivity Test, ICT, failed).

  1026                 error = KErrGeneral;

  1027             } else {

  1028                 // Use name of the IAP to open global 'Open C' RConnection

  1029                 ifreq ifr;

  1030                 memset(&ifr, 0, sizeof(struct ifreq));

  1031                 QByteArray nameAsByteArray = newActiveConfig.name().toUtf8();

  1032                 strcpy(ifr.ifr_name, nameAsByteArray.constData());

  1033                 error = setdefaultif(&ifr);

  1034             }

  1035             if (error != KErrNone) {

  1036                 isOpen = false;

  1037                 isOpening = false;

  1038                 iError = QNetworkSession::UnknownSessionError;

  1039                 QT_TRYCATCH_LEAVING(emit q->error(iError));

  1040                 if (ipConnectionNotifier) {

  1041                     ipConnectionNotifier->StopNotifications();

  1042                 }

  1043                 if (!newActiveConfig.isValid()) {

  1044                     // No valid configuration, bail out.

  1045                     // Status updates from QNCM won't be received correctly

  1046                     // because there is no configuration to associate them with so transit here.

  1047                     iConnection.Close();

  1048                     newState(QNetworkSession::Closing);

  1049                     newState(QNetworkSession::Disconnected);

  1050                 } else {

  1051                     Cancel();

  1052                 }

  1053                 QT_TRYCATCH_LEAVING(syncStateWithInterface());

  1054                 return;

  1055             }

  1056  

  1057 #ifdef SNAP_FUNCTIONALITY_AVAILABLE

  1058             if (publicConfig.type() == QNetworkConfiguration::ServiceNetwork) {

  1059                 // Activate ALR monitoring

  1060                 iMobility = CActiveCommsMobilityApiExt::NewL(iConnection, *this);

  1061             }

  1062 #endif

  1063             isOpen = true;

  1064             isOpening = false;

  1065             activeConfig = newActiveConfig;

  1066             activeInterface = interface(activeConfig.d.data()->numericId);

  1067             if (publicConfig.type() == QNetworkConfiguration::UserChoice) {

  1068                 QNetworkConfiguration pt;

  1069                 pt.d = activeConfig.d.data()->serviceNetworkPtr;

  1070                 serviceConfig = pt;

  1071             }

  1072             

  1073             startTime = QDateTime::currentDateTime();

  1074 

  1075             QT_TRYCATCH_LEAVING({

  1076                     newState(QNetworkSession::Connected);

  1077                     emit quitPendingWaitsForOpened();

  1078                 });

  1079             }

  1080             break;

  1081         case KErrNotFound: // Connection failed

  1082             isOpen = false;

  1083             isOpening = false;

  1084             activeConfig = QNetworkConfiguration();

  1085             serviceConfig = QNetworkConfiguration();

  1086             iError = QNetworkSession::InvalidConfigurationError;

  1087             QT_TRYCATCH_LEAVING(emit q->error(iError));

  1088             Cancel();

  1089             if (ipConnectionNotifier) {

  1090                 ipConnectionNotifier->StopNotifications();

  1091             }

  1092             QT_TRYCATCH_LEAVING(syncStateWithInterface());

  1093             break;

  1094         case KErrCancel: // Connection attempt cancelled

  1095         case KErrAlreadyExists: // Connection already exists

  1096         default:

  1097             isOpen = false;

  1098             isOpening = false;

  1099             activeConfig = QNetworkConfiguration();

  1100             serviceConfig = QNetworkConfiguration();

  1101             if (statusCode == KErrCancel) {

  1102                 iError = QNetworkSession::SessionAbortedError;

  1103             } else if (publicConfig.state() == QNetworkConfiguration::Undefined ||

  1104                 publicConfig.state() == QNetworkConfiguration::Defined) {

  1105                 iError = QNetworkSession::InvalidConfigurationError;

  1106             } else {

  1107                 iError = QNetworkSession::UnknownSessionError;

  1108             }

  1109             QT_TRYCATCH_LEAVING(emit q->error(iError));

  1110             Cancel();

  1111             if (ipConnectionNotifier) {

  1112                 ipConnectionNotifier->StopNotifications();

  1113             }

  1114             QT_TRYCATCH_LEAVING(syncStateWithInterface());

  1115             break;

  1116     }

  1117 }

  1118 

  1119 void QNetworkSessionPrivate::DoCancel()

  1120 {

  1121     iConnection.Close();

  1122 }

  1123 

  1124 // Enters newState if feasible according to current state.

  1125 // AccessPointId may be given as parameter. If it is zero, state-change is assumed to

  1126 // concern this session's configuration. If non-zero, the configuration is looked up

  1127 // and checked if it matches the configuration this session is based on.

  1128 bool QNetworkSessionPrivate::newState(QNetworkSession::State newState, TUint accessPointId)

  1129 {

  1130 #ifdef QT_BEARERMGMT_SYMBIAN_DEBUG

  1131     qDebug() << "QNS this : " << QString::number((uint)this) << " - "

  1132              << "NEW STATE, IAP ID : " << QString::number(accessPointId) << " , newState : " << QString::number(newState);

  1133 #endif

  1134     // Make sure that activeConfig is always updated when SNAP is signaled to be

  1135     // connected.