This is a C wrapper around the C++ UnicodeSet class.
+ */ + +#ifndef __USET_H__ +#define __USET_H__ + +#include "unicode/utypes.h" +#include "unicode/uchar.h" + +#ifndef UCNV_H +struct USet; +/** + * A UnicodeSet. Use the uset_* API to manipulate. Create with + * uset_open*, and destroy with uset_close. + * @stable ICU 2.4 + */ +typedef struct USet USet; +#endif + +/** + * Bitmask values to be passed to uset_openPatternOptions() or + * uset_applyPattern() taking an option parameter. + * @stable ICU 2.4 + */ +enum { + /** + * Ignore white space within patterns unless quoted or escaped. + * @stable ICU 2.4 + */ + USET_IGNORE_SPACE = 1, + + /** + * Enable case insensitive matching. E.g., "[ab]" with this flag + * will match 'a', 'A', 'b', and 'B'. "[^ab]" with this flag will + * match all except 'a', 'A', 'b', and 'B'. This performs a full + * closure over case mappings, e.g. U+017F for s. + * @stable ICU 2.4 + */ + USET_CASE_INSENSITIVE = 2, + + /** + * Bitmask for UnicodeSet::closeOver() indicating letter case. + * This may be ORed together with other selectors. + * @internal + */ + USET_CASE = 2, + + /** + * Enable case insensitive matching. E.g., "[ab]" with this flag + * will match 'a', 'A', 'b', and 'B'. "[^ab]" with this flag will + * match all except 'a', 'A', 'b', and 'B'. This adds the lower-, + * title-, and uppercase mappings as well as the case folding + * of each existing element in the set. + * @draft ICU 3.2 + */ + USET_ADD_CASE_MAPPINGS = 4, + + /** + * Enough for any single-code point set + * @internal + */ + USET_SERIALIZED_STATIC_ARRAY_CAPACITY=8 +}; + +/** + * A serialized form of a Unicode set. Limited manipulations are + * possible directly on a serialized set. See below. + * @stable ICU 2.4 + */ +typedef struct USerializedSet { + /** + * The serialized Unicode Set. + * @stable ICU 2.4 + */ + const uint16_t *array; + /** + * The length of the array that contains BMP characters. + * @stable ICU 2.4 + */ + int32_t bmpLength; + /** + * The total length of the array. + * @stable ICU 2.4 + */ + int32_t length; + /** + * A small buffer for the array to reduce memory allocations. + * @stable ICU 2.4 + */ + uint16_t staticArray[USET_SERIALIZED_STATIC_ARRAY_CAPACITY]; +} USerializedSet; + +/********************************************************************* + * USet API + *********************************************************************/ + +/** + * Creates a USet object that contains the range of characters + * start..end, inclusive. + * @param start first character of the range, inclusive + * @param end last character of the range, inclusive + * @return a newly created USet. The caller must call uset_close() on + * it when done. + * @stable ICU 2.4 + */ +U_STABLE USet* U_EXPORT2 +uset_open(UChar32 start, UChar32 end); + +/** + * Creates a set from the given pattern. See the UnicodeSet class + * description for the syntax of the pattern language. + * @param pattern a string specifying what characters are in the set + * @param patternLength the length of the pattern, or -1 if null + * terminated + * @param ec the error code + * @stable ICU 2.4 + */ +U_STABLE USet* U_EXPORT2 +uset_openPattern(const UChar* pattern, int32_t patternLength, + UErrorCode* ec); + +/** + * Creates a set from the given pattern. See the UnicodeSet class + * description for the syntax of the pattern language. + * @param pattern a string specifying what characters are in the set + * @param patternLength the length of the pattern, or -1 if null + * terminated + * @param options bitmask for options to apply to the pattern. + * Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE. + * @param ec the error code + * @stable ICU 2.4 + */ +U_STABLE USet* U_EXPORT2 +uset_openPatternOptions(const UChar* pattern, int32_t patternLength, + uint32_t options, + UErrorCode* ec); + +/** + * Disposes of the storage used by a USet object. This function should + * be called exactly once for objects returned by uset_open(). + * @param set the object to dispose of + * @stable ICU 2.4 + */ +U_STABLE void U_EXPORT2 +uset_close(USet* set); + +/** + * Causes the USet object to represent the rangestart - end.
+ * If start > end then this USet is set to an empty range.
+ * @param set the object to set to the given range
+ * @param start first character in the set, inclusive
+ * @param end last character in the set, inclusive
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_set(USet* set,
+ UChar32 start, UChar32 end);
+
+/**
+ * Modifies the set to represent the set specified by the given
+ * pattern. See the UnicodeSet class description for the syntax of
+ * the pattern language. See also the User Guide chapter about UnicodeSet.
+ * Empties the set passed before applying the pattern.
+ * @param set The set to which the pattern is to be applied.
+ * @param pattern A pointer to UChar string specifying what characters are in the set.
+ * The character at pattern[0] must be a '['.
+ * @param patternLength The length of the UChar string. -1 if NUL terminated.
+ * @param options A bitmask for options to apply to the pattern.
+ * Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE.
+ * @param status Returns an error if the pattern cannot be parsed.
+ * @return Upon successful parse, the value is either
+ * the index of the character after the closing ']'
+ * of the parsed pattern.
+ * If the status code indicates failure, then the return value
+ * is the index of the error in the source.
+ *
+ * @draft ICU 2.8
+ */
+U_DRAFT int32_t U_EXPORT2
+uset_applyPattern(USet *set,
+ const UChar *pattern, int32_t patternLength,
+ uint32_t options,
+ UErrorCode *status);
+
+/**
+ * Modifies the set to contain those code points which have the given value
+ * for the given binary or enumerated property, as returned by
+ * u_getIntPropertyValue. Prior contents of this set are lost.
+ *
+ * @param set the object to contain the code points defined by the property
+ *
+ * @param prop a property in the range UCHAR_BIN_START..UCHAR_BIN_LIMIT-1
+ * or UCHAR_INT_START..UCHAR_INT_LIMIT-1
+ * or UCHAR_MASK_START..UCHAR_MASK_LIMIT-1.
+ *
+ * @param value a value in the range u_getIntPropertyMinValue(prop)..
+ * u_getIntPropertyMaxValue(prop), with one exception. If prop is
+ * UCHAR_GENERAL_CATEGORY_MASK, then value should not be a UCharCategory, but
+ * rather a mask value produced by U_GET_GC_MASK(). This allows grouped
+ * categories such as [:L:] to be represented.
+ *
+ * @param ec error code input/output parameter
+ *
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_applyIntPropertyValue(USet* set,
+ UProperty prop, int32_t value, UErrorCode* ec);
+
+/**
+ * Modifies the set to contain those code points which have the
+ * given value for the given property. Prior contents of this
+ * set are lost.
+ *
+ * @param set the object to contain the code points defined by the given
+ * property and value alias
+ *
+ * @param prop a string specifying a property alias, either short or long.
+ * The name is matched loosely. See PropertyAliases.txt for names and a
+ * description of loose matching. If the value string is empty, then this
+ * string is interpreted as either a General_Category value alias, a Script
+ * value alias, a binary property alias, or a special ID. Special IDs are
+ * matched loosely and correspond to the following sets:
+ *
+ * "ANY" = [\\u0000-\\U0010FFFF],
+ * "ASCII" = [\\u0000-\\u007F].
+ *
+ * @param propLength the length of the prop, or -1 if NULL
+ *
+ * @param value a string specifying a value alias, either short or long.
+ * The name is matched loosely. See PropertyValueAliases.txt for names
+ * and a description of loose matching. In addition to aliases listed,
+ * numeric values and canonical combining classes may be expressed
+ * numerically, e.g., ("nv", "0.5") or ("ccc", "220"). The value string
+ * may also be empty.
+ *
+ * @param valueLength the length of the value, or -1 if NULL
+ *
+ * @param ec error code input/output parameter
+ *
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_applyPropertyAlias(USet* set,
+ const UChar *prop, int32_t propLength,
+ const UChar *value, int32_t valueLength,
+ UErrorCode* ec);
+
+/**
+ * Return true if the given position, in the given pattern, appears
+ * to be the start of a UnicodeSet pattern.
+ *
+ * @param pattern a string specifying the pattern
+ * @param patternLength the length of the pattern, or -1 if NULL
+ * @param pos the given position
+ * @draft ICU 3.2
+ */
+U_DRAFT UBool U_EXPORT2
+uset_resemblesPattern(const UChar *pattern, int32_t patternLength,
+ int32_t pos);
+
+/**
+ * Returns a string representation of this set. If the result of
+ * calling this function is passed to a uset_openPattern(), it
+ * will produce another set that is equal to this one.
+ * @param set the set
+ * @param result the string to receive the rules, may be NULL
+ * @param resultCapacity the capacity of result, may be 0 if result is NULL
+ * @param escapeUnprintable if TRUE then convert unprintable
+ * character to their hex escape representations, \\uxxxx or
+ * \\Uxxxxxxxx. Unprintable characters are those other than
+ * U+000A, U+0020..U+007E.
+ * @param ec error code.
+ * @return length of string, possibly larger than resultCapacity
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_toPattern(const USet* set,
+ UChar* result, int32_t resultCapacity,
+ UBool escapeUnprintable,
+ UErrorCode* ec);
+
+/**
+ * Adds the given character to the given USet. After this call,
+ * uset_contains(set, c) will return TRUE.
+ * @param set the object to which to add the character
+ * @param c the character to add
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_add(USet* set, UChar32 c);
+
+/**
+ * Adds all of the elements in the specified set to this set if
+ * they're not already present. This operation effectively
+ * modifies this set so that its value is the union of the two
+ * sets. The behavior of this operation is unspecified if the specified
+ * collection is modified while the operation is in progress.
+ *
+ * @param set the object to which to add the set
+ * @param additionalSet the source set whose elements are to be added to this set.
+ * @stable ICU 2.6
+ */
+U_STABLE void U_EXPORT2
+uset_addAll(USet* set, const USet *additionalSet);
+
+/**
+ * Adds the given range of characters to the given USet. After this call,
+ * uset_contains(set, start, end) will return TRUE.
+ * @param set the object to which to add the character
+ * @param start the first character of the range to add, inclusive
+ * @param end the last character of the range to add, inclusive
+ * @stable ICU 2.2
+ */
+U_STABLE void U_EXPORT2
+uset_addRange(USet* set, UChar32 start, UChar32 end);
+
+/**
+ * Adds the given string to the given USet. After this call,
+ * uset_containsString(set, str, strLen) will return TRUE.
+ * @param set the object to which to add the character
+ * @param str the string to add
+ * @param strLen the length of the string or -1 if null terminated.
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_addString(USet* set, const UChar* str, int32_t strLen);
+
+/**
+ * Removes the given character from the given USet. After this call,
+ * uset_contains(set, c) will return FALSE.
+ * @param set the object from which to remove the character
+ * @param c the character to remove
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_remove(USet* set, UChar32 c);
+
+/**
+ * Removes the given range of characters from the given USet. After this call,
+ * uset_contains(set, start, end) will return FALSE.
+ * @param set the object to which to add the character
+ * @param start the first character of the range to remove, inclusive
+ * @param end the last character of the range to remove, inclusive
+ * @stable ICU 2.2
+ */
+U_STABLE void U_EXPORT2
+uset_removeRange(USet* set, UChar32 start, UChar32 end);
+
+/**
+ * Removes the given string to the given USet. After this call,
+ * uset_containsString(set, str, strLen) will return FALSE.
+ * @param set the object to which to add the character
+ * @param str the string to remove
+ * @param strLen the length of the string or -1 if null terminated.
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_removeString(USet* set, const UChar* str, int32_t strLen);
+
+/**
+ * Removes from this set all of its elements that are contained in the
+ * specified set. This operation effectively modifies this
+ * set so that its value is the asymmetric set difference of
+ * the two sets.
+ * @param set the object from which the elements are to be removed
+ * @param removeSet the object that defines which elements will be
+ * removed from this set
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_removeAll(USet* set, const USet* removeSet);
+
+/**
+ * Retain only the elements in this set that are contained in the
+ * specified range. If start > end then an empty range is
+ * retained, leaving the set empty. This is equivalent to
+ * a boolean logic AND, or a set INTERSECTION.
+ *
+ * @param set the object for which to retain only the specified range
+ * @param start first character, inclusive, of range to be retained
+ * to this set.
+ * @param end last character, inclusive, of range to be retained
+ * to this set.
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_retain(USet* set, UChar32 start, UChar32 end);
+
+/**
+ * Retains only the elements in this set that are contained in the
+ * specified set. In other words, removes from this set all of
+ * its elements that are not contained in the specified set. This
+ * operation effectively modifies this set so that its value is
+ * the intersection of the two sets.
+ *
+ * @param set the object on which to perform the retain
+ * @param retain set that defines which elements this set will retain
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_retainAll(USet* set, const USet* retain);
+
+/**
+ * Reallocate this objects internal structures to take up the least
+ * possible space, without changing this object's value.
+ *
+ * @param set the object on which to perfrom the compact
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_compact(USet* set);
+
+/**
+ * Inverts this set. This operation modifies this set so that
+ * its value is its complement. This operation does not affect
+ * the multicharacter strings, if any.
+ * @param set the set
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_complement(USet* set);
+
+/**
+ * Complements in this set all elements contained in the specified
+ * set. Any character in the other set will be removed if it is
+ * in this set, or will be added if it is not in this set.
+ *
+ * @param set the set with which to complement
+ * @param complement set that defines which elements will be xor'ed
+ * from this set.
+ * @draft ICU 3.2
+ */
+U_DRAFT void U_EXPORT2
+uset_complementAll(USet* set, const USet* complement);
+
+/**
+ * Removes all of the elements from this set. This set will be
+ * empty after this call returns.
+ * @param set the set
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_clear(USet* set);
+
+/**
+ * Returns TRUE if the given USet contains no characters and no
+ * strings.
+ * @param set the set
+ * @return true if set is empty
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_isEmpty(const USet* set);
+
+/**
+ * Returns TRUE if the given USet contains the given character.
+ * @param set the set
+ * @param c The codepoint to check for within the set
+ * @return true if set contains c
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_contains(const USet* set, UChar32 c);
+
+/**
+ * Returns TRUE if the given USet contains all characters c
+ * where start <= c && c <= end.
+ * @param set the set
+ * @param start the first character of the range to test, inclusive
+ * @param end the last character of the range to test, inclusive
+ * @return TRUE if set contains the range
+ * @stable ICU 2.2
+ */
+U_STABLE UBool U_EXPORT2
+uset_containsRange(const USet* set, UChar32 start, UChar32 end);
+
+/**
+ * Returns TRUE if the given USet contains the given string.
+ * @param set the set
+ * @param str the string
+ * @param strLen the length of the string or -1 if null terminated.
+ * @return true if set contains str
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_containsString(const USet* set, const UChar* str, int32_t strLen);
+
+/**
+ * Returns the index of the given character within this set, where
+ * the set is ordered by ascending code point. If the character
+ * is not in this set, return -1. The inverse of this method is
+ * charAt().
+ * @param set the set
+ * @param c the character to obtain the index for
+ * @return an index from 0..size()-1, or -1
+ * @draft ICU 3.2
+ */
+U_DRAFT int32_t U_EXPORT2
+uset_indexOf(const USet* set, UChar32 c);
+
+/**
+ * Returns the character at the given index within this set, where
+ * the set is ordered by ascending code point. If the index is
+ * out of range, return (UChar32)-1. The inverse of this method is
+ * indexOf().
+ * @param set the set
+ * @param index an index from 0..size()-1 to obtain the char for
+ * @return the character at the given index, or (UChar32)-1.
+ * @draft ICU 3.2
+ */
+U_DRAFT UChar32 U_EXPORT2
+uset_charAt(const USet* set, int32_t index);
+
+/**
+ * Returns the number of characters and strings contained in the given
+ * USet.
+ * @param set the set
+ * @return a non-negative integer counting the characters and strings
+ * contained in set
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_size(const USet* set);
+
+/**
+ * Returns the number of items in this set. An item is either a range
+ * of characters or a single multicharacter string.
+ * @param set the set
+ * @return a non-negative integer counting the character ranges
+ * and/or strings contained in set
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_getItemCount(const USet* set);
+
+/**
+ * Returns an item of this set. An item is either a range of
+ * characters or a single multicharacter string.
+ * @param set the set
+ * @param itemIndex a non-negative integer in the range 0..
+ * uset_getItemCount(set)-1
+ * @param start pointer to variable to receive first character
+ * in range, inclusive
+ * @param end pointer to variable to receive last character in range,
+ * inclusive
+ * @param str buffer to receive the string, may be NULL
+ * @param strCapacity capacity of str, or 0 if str is NULL
+ * @param ec error code
+ * @return the length of the string (>= 2), or 0 if the item is a
+ * range, in which case it is the range *start..*end, or -1 if
+ * itemIndex is out of range
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_getItem(const USet* set, int32_t itemIndex,
+ UChar32* start, UChar32* end,
+ UChar* str, int32_t strCapacity,
+ UErrorCode* ec);
+
+/**
+ * Returns true if set1 contains all the characters and strings
+ * of set2. It answers the question, 'Is set1 a subset of set2?'
+ * @param set1 set to be checked for containment
+ * @param set2 set to be checked for containment
+ * @return true if the test condition is met
+ * @draft ICU 3.2
+ */
+U_DRAFT UBool U_EXPORT2
+uset_containsAll(const USet* set1, const USet* set2);
+
+/**
+ * Returns true if set1 contains none of the characters and strings
+ * of set2. It answers the question, 'Is set1 a disjoint set of set2?'
+ * @param set1 set to be checked for containment
+ * @param set2 set to be checked for containment
+ * @return true if the test condition is met
+ * @draft ICU 3.2
+ */
+U_DRAFT UBool U_EXPORT2
+uset_containsNone(const USet* set1, const USet* set2);
+
+/**
+ * Returns true if set1 contains some of the characters and strings
+ * of set2. It answers the question, 'Does set1 and set2 have an intersection?'
+ * @param set1 set to be checked for containment
+ * @param set2 set to be checked for containment
+ * @return true if the test condition is met
+ * @draft ICU 3.2
+ */
+U_DRAFT UBool U_EXPORT2
+uset_containsSome(const USet* set1, const USet* set2);
+
+/**
+ * Returns true if set1 contains all of the characters and strings
+ * of set2, and vis versa. It answers the question, 'Is set1 equal to set2?'
+ * @param set1 set to be checked for containment
+ * @param set2 set to be checked for containment
+ * @return true if the test condition is met
+ * @draft ICU 3.2
+ */
+U_DRAFT UBool U_EXPORT2
+uset_equals(const USet* set1, const USet* set2);
+
+/*********************************************************************
+ * Serialized set API
+ *********************************************************************/
+
+/**
+ * Serializes this set into an array of 16-bit integers. Serialization
+ * (currently) only records the characters in the set; multicharacter
+ * strings are ignored.
+ *
+ * The array
+ * has following format (each line is one 16-bit integer):
+ *
+ * length = (n+2*m) | (m!=0?0x8000:0)
+ * bmpLength = n; present if m!=0
+ * bmp[0]
+ * bmp[1]
+ * ...
+ * bmp[n-1]
+ * supp-high[0]
+ * supp-low[0]
+ * supp-high[1]
+ * supp-low[1]
+ * ...
+ * supp-high[m-1]
+ * supp-low[m-1]
+ *
+ * The array starts with a header. After the header are n bmp
+ * code points, then m supplementary code points. Either n or m
+ * or both may be zero. n+2*m is always <= 0x7FFF.
+ *
+ * If there are no supplementary characters (if m==0) then the
+ * header is one 16-bit integer, 'length', with value n.
+ *
+ * If there are supplementary characters (if m!=0) then the header
+ * is two 16-bit integers. The first, 'length', has value
+ * (n+2*m)|0x8000. The second, 'bmpLength', has value n.
+ *
+ * After the header the code points are stored in ascending order.
+ * Supplementary code points are stored as most significant 16
+ * bits followed by least significant 16 bits.
+ *
+ * @param set the set
+ * @param dest pointer to buffer of destCapacity 16-bit integers.
+ * May be NULL only if destCapacity is zero.
+ * @param destCapacity size of dest, or zero. Must not be negative.
+ * @param pErrorCode pointer to the error code. Will be set to
+ * U_INDEX_OUTOFBOUNDS_ERROR if n+2*m > 0x7FFF. Will be set to
+ * U_BUFFER_OVERFLOW_ERROR if n+2*m+(m!=0?2:1) > destCapacity.
+ * @return the total length of the serialized format, including
+ * the header, that is, n+2*m+(m!=0?2:1), or 0 on error other
+ * than U_BUFFER_OVERFLOW_ERROR.
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_serialize(const USet* set, uint16_t* dest, int32_t destCapacity, UErrorCode* pErrorCode);
+
+/**
+ * Given a serialized array, fill in the given serialized set object.
+ * @param fillSet pointer to result
+ * @param src pointer to start of array
+ * @param srcLength length of array
+ * @return true if the given array is valid, otherwise false
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_getSerializedSet(USerializedSet* fillSet, const uint16_t* src, int32_t srcLength);
+
+/**
+ * Set the USerializedSet to contain the given character (and nothing
+ * else).
+ * @param fillSet pointer to result
+ * @param c The codepoint to set
+ * @stable ICU 2.4
+ */
+U_STABLE void U_EXPORT2
+uset_setSerializedToOne(USerializedSet* fillSet, UChar32 c);
+
+/**
+ * Returns TRUE if the given USerializedSet contains the given
+ * character.
+ * @param set the serialized set
+ * @param c The codepoint to check for within the set
+ * @return true if set contains c
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_serializedContains(const USerializedSet* set, UChar32 c);
+
+/**
+ * Returns the number of disjoint ranges of characters contained in
+ * the given serialized set. Ignores any strings contained in the
+ * set.
+ * @param set the serialized set
+ * @return a non-negative integer counting the character ranges
+ * contained in set
+ * @stable ICU 2.4
+ */
+U_STABLE int32_t U_EXPORT2
+uset_getSerializedRangeCount(const USerializedSet* set);
+
+/**
+ * Returns a range of characters contained in the given serialized
+ * set.
+ * @param set the serialized set
+ * @param rangeIndex a non-negative integer in the range 0..
+ * uset_getSerializedRangeCount(set)-1
+ * @param pStart pointer to variable to receive first character
+ * in range, inclusive
+ * @param pEnd pointer to variable to receive last character in range,
+ * inclusive
+ * @return true if rangeIndex is valid, otherwise false
+ * @stable ICU 2.4
+ */
+U_STABLE UBool U_EXPORT2
+uset_getSerializedRange(const USerializedSet* set, int32_t rangeIndex,
+ UChar32* pStart, UChar32* pEnd);
+
+#endif