diff -r 000000000000 -r 164170e6151a secsrv_plat/keyguard_configuration_api/inc/LockDomainCRKeys.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/secsrv_plat/keyguard_configuration_api/inc/LockDomainCRKeys.h	Tue Jan 26 15:20:08 2010 +0200
@@ -0,0 +1,208 @@
+/*
+* Copyright (c) 2007 Nokia Corporation and/or its subsidiary(-ies). 
+* All rights reserved.
+* This component and the accompanying materials are made available
+* under the terms of "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Nokia Corporation - initial contribution.
+*
+* Contributors:
+*
+* Description:  Internal Central Repository keys.
+ *
+ *
+*/
+
+
+#ifndef LOCK_DOMAIN_CR_KEYS_H
+#define LOCK_DOMAIN_CR_KEYS_H
+
+// INCLUDES
+#include <centralrepository.h>
+
+const TUid KCRUidLockConf = { 0x10283322 };
+
+/**
+ * Products must configure this value depending on 
+ * what lock/unlock approach is supported by the device hardware
+ *
+ * Possible product modes are are:
+ *
+ * EKeyguardDefaultHardware = 0 // no addional hardware support
+ * EKeyguardOnePositionSwitch = 1 // one position spring adjusted switch
+ * EKeyguardTwoPositionSwitch = 2 // on-off type keyguard switch
+ *
+ * EKeyguardDefaultHardware is default in the platform.
+ */
+const TUint32 KKeyguardHardwareConf = 0x00000001;
+
+enum TLockHardware
+    {
+    EKeyguardDefaultHardware = 0,
+    EKeyguardOnePositionSwitch,
+    EKeyguardTwoPositionSwitch
+    };
+
+/**
+ * Products and applications can set on run-time if keyguard
+ * feature should be momentarily disabled/enabled.
+ *
+ * Possible run-time modes are are:
+ *
+ * EKeyguardNotAllowed = 0 // enabling keyguard is not allowed
+ * EKeyguardAllowed = 1 // keyguard works normally
+ *
+ * EKeyguardAllowed is default in the platform.
+ */    
+const TUint32 KLockKeyguardAllow = 0x00000002;
+
+enum TKeyguardAllow
+    {
+    EKeyguardNotAllowed = 0,
+    EKeyguardAllowed = 1,
+    };
+
+/**
+ * Products and applications can configure lock timer 
+ * interval in microseconds.
+ *
+ * KLockDefaultInterval of 2000000 microseconds is default in the platform.
+ */       
+const TUint32 KLockTimerInterval = 0x00000003;
+
+/**
+ * Products and applications can change between different  
+ * Keylock policy configurations by changing policy mode.
+ * 
+ * Possible run-time modes are are:
+ *
+ * ELockDefault = 0 // Used key configuration in default setup
+ * ELockSlider = 1 // Used key configuration in slider setup
+ * 
+ * Products can define new modes if needed.
+ * 
+ * Configuration ELockDefault is default in the platform.
+ */       
+const TUint32 KLockPolicyMode = 0x00000004;
+
+/**  
+ * Physical keys (scan code) used for locking/unlocking/query have been stored 
+ * in central repository keys with identification value of defined as     
+ * 0x000000XX Key configurations supported in the mode+type, e.g. 00 = left soft key + right soft key, 01 = left soft key + Fn
+ * 0x00000X00 Key code sequence number. 1 = primary key , 2 = secondary key
+ * 0x0000X000 from TLockPolicyType, 1= activate lock, 2 = deactivate lock, 3 = devicelock query
+ * 0x000X0000 from TLockPolicyMode, 1 = default configuration, 2 = slider configuration
+ *
+ * The default platform locking/unlocking/query configurations have been listed below.
+ */    
+
+/**
+ * Pre-defined policymodes, 1 = default configuration, 2 = slider configuration
+ * Modes are identified in a hexadecimal reserved in mask 0x000X0000.
+ */
+enum TLockPolicyMode
+    {
+    ELockNone = 0,
+    ELockDefault = 1,
+    ELockSlider = 2,
+    };
+
+/**
+ * Key code sequence number. 1 = primary key , 2 = secondary key.
+ * Key number is identified in a hexadecimal reserved in mask 0x00000X00.
+ */
+const TUint32 KLockFirstPrimaryKey = 0x00000100;
+const TUint32 KLockFirstSecondaryKey= 0x00000200;
+
+/**
+ * ============================================================================
+ * Policy mode default (left soft key+* for unlock/lock and left soft key for device lock)
+ * (not used directly)
+ * ============================================================================
+ */ 
+    
+/**
+ * First scan code key used for locking the phone in the default mode.
+ * Works when mode = ELockDefault and type = EActivateKeyguard.
+ * Default value is left soft key value with scan code 0xa4.
+ */
+const TUint32 KLockDefaultLockPrimaryConf00 = 0x00011100;
+    
+/**
+ * Second scan code key used for locking the phone in the default mode.
+ * Works when mode = ELockDefault and type = EActivateKeyguard.
+ * Default value is star key on ITU-keypad with scan code 0x2a.
+ */
+const TUint32 KLockDefaultLockSecondaryConf00 = 0x00011200;
+
+/**
+ * First scan code key used for unlocking the phone in the default mode.
+ * Works when mode = ELockDefault and type = EDeactivateKeyguard.
+ * Default value is left soft key with scan code 0xa4.
+ */
+const TUint32 KLockDefaultUnlockPrimaryConf00 = 0x00012100;
+    
+/**
+ * Second scan code key used for unlocking the phone in the default mode.
+ * Works when mode = ELockDefault and type = EDeactivateKeyguard.
+ * Default value is star key with scan code 0x2a.
+ */
+const TUint32 KLockDefaultUnlockSecondaryConf00 = 0x00012200;
+
+/**
+ * Scan code key used for showing security query when device is locked 
+ * in the default mode.
+ * Works when mode = ELockDefault and type = EDevicelockQuery.
+ * Default value is left soft key with scan code 0xa4.
+ */
+const TUint32 KLockDefaultSecQueryPrimaryConf00 = 0x00013100;
+
+/**
+ * ============================================================================
+ * Policy mode slider (left soft key+right soft key for unlock/lock and left soft key for device lock)
+ * (not used directly)
+ * ============================================================================
+ */ 
+ 
+/**
+ * First scan code key used for locking the phone in the slider mode.
+ * Works when mode = ELockSlider and type = EActivateKeyguard.
+ * Default value is left soft key with scan code 0xa4.
+ */
+const TUint32 KLockSliderLockPrimaryConf00 = 0x00021100;
+
+/**
+ * Second scan code key used for locking the phone in the slider mode.
+ * Works when mode = ELockSlider and type = EActivateKeyguard.
+ * Default value is right soft key with scan code 0xa5.
+ */
+const TUint32 KLockSliderLockSecondaryConf00 = 0x00021200;
+
+/**
+ * First scan code key used for unlocking the phone in the slider mode.
+ * Works when mode = ELockSlider and type = EDeactivateKeyguard.
+ * Default value is left soft key with scan code 0xa4.
+ */
+const TUint32 KLockSliderUnlockPrimaryConf00 = 0x00022100;
+
+/**
+ * Second scan code key used for unlocking the phone in the slider mode.
+ * Works when mode = ELockSlider and type = EDeactivateKeyguard.
+ * Default value is right soft key with scan code 0xa5.
+ */
+const TUint32 KLockSliderUnlockSecondaryConf00 = 0x00022200;
+
+/**
+ * Scan code key used for showing security query when device is locked 
+ * in the slider mode.
+ * Works when mode = ELockSlider and type = EDevicelockQuery.
+ * Default value is left soft key with scan code 0xa4.
+ */
+const TUint32 KLockSliderSecQueryPrimaryConf00 = 0x00023100;
+
+#endif
+
+// End of file