--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/localconnectivityservice/modematplugin/inc/modematplugin.h Tue Feb 02 00:45:58 2010 +0200
@@ -0,0 +1,356 @@
+/*
+* Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
+* All rights reserved.
+* This component and the accompanying materials are made available
+* under the terms of "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Nokia Corporation - initial contribution.
+*
+* Contributors:
+*
+* Description: Main handler for incoming requests
+*
+*/
+
+
+#ifndef C_MODEMATPLUGIN_H
+#define C_MODEMATPLUGIN_H
+
+#include <atextpluginbase.h>
+#include "cmdpluginobserver.h"
+
+
+/**
+ * Class for common AT command handler interface
+ *
+ * @since S60 TB9.2
+ */
+NONSHARABLE_CLASS( CATCommandHandlerBase )
+ {
+
+public:
+
+ virtual ~CATCommandHandlerBase() {};
+
+ /**
+ * Reports the support status of an AT command. This is a synchronous API.
+ *
+ * @param aCmd The AT command. Its format may vary depending on the
+ * specification. E.g. in BT HFP case, the command may contain
+ * a character carriage return (<cr>) in the end.
+ * @return ETrue if the command is supported; EFalse otherwise.
+ */
+ virtual TBool IsCommandSupported( const TDesC8& aCmd ) = 0;
+
+ /**
+ * Handles an AT command. Cancelling of the pending request is done by
+ * HandleCommandCancel(). The implementation in the extension plugin should
+ * be asynchronous.
+ *
+ * The extension plugin which accepts this command is responsible to supply
+ * the result codes and response and to format result codes properly, e.g.
+ * in BT HFP case, the format should be <cr><lf><result code><cr><lf>
+ *
+ * After an extension plugin has handled or decided to reject the given AT
+ * command, it must inform ATEXT by HandleCommandCompleted() with a proper
+ * error code.
+ *
+ * @since S60 TB9.2
+ * @param aCmd The AT command to be handled. Its format may vary depending
+ * on the specification. E.g. in BT HFP case, the command may
+ * contain a character carriage return (<cr>) in the end.
+ * @param aReply When passed in, contains the built in answer filled by
+ * ATEXT if it is not empty; when command handling completes
+ * successfully, contains the result codes and responses to
+ * this command; Its ownership always belongs to ATEXT, plugin
+ * may reallocate its space when needed.
+ * @param aReplyNeeded Reply needed if ETrue, no reply otherwise. If EFalse,
+ * the aReply must not contain the reply, otherwise it
+ * must contain verbose or numeric reply (ATV0/1) or an
+ * empty string reply (with ATQ).
+ * @return None
+ */
+ virtual void HandleCommand( const TDesC8& aCmd,
+ RBuf8& aReply,
+ TBool aReplyNeeded ) = 0;
+
+ /**
+ * Cancels a pending HandleCommand request.
+ *
+ * @since S60 TB9.2
+ * @return None
+ */
+ virtual void HandleCommandCancel() = 0;
+
+ };
+
+
+/**
+ * Class for selecting handlers for different AT commands
+ *
+ * @since TB9.2
+ */
+NONSHARABLE_CLASS( CModemAtPlugin ) : public CATExtPluginBase, public MCmdPluginObserver
+ {
+
+public:
+
+ /**
+ * Two-phased constructor.
+ * @return Instance of self
+ */
+ static CModemAtPlugin* NewL();
+
+ /**
+ * Destructor.
+ */
+ virtual ~CModemAtPlugin();
+
+private:
+
+ CModemAtPlugin();
+
+ void ConstructL();
+
+ /**
+ * Reports connection identifier name to the extension plugin.
+ *
+ * @since TB9.2
+ * @param aName Connection identifier name
+ * @return None
+ */
+ void ReportConnectionName( const TDesC8& aName );
+
+ /**
+ * Reports the support status of an AT command. This is a synchronous API.
+ *
+ * @param aCmd The AT command. Its format may vary depending on the
+ * specification. E.g. in BT HFP case, the command may contain
+ * a character carriage return (<cr>) in the end.
+ * @return ETrue if the command is supported; EFalse otherwise.
+ */
+ TBool IsCommandSupported( const TDesC8& aCmd );
+
+ /**
+ * Handles an AT command. Cancelling of the pending request is done by
+ * HandleCommandCancel(). The implementation in the extension plugin should
+ * be asynchronous.
+ *
+ * The extension plugin which accepts this command is responsible to supply
+ * the result codes and response and to format result codes properly, e.g.
+ * in BT HFP case, the format should be <cr><lf><result code><cr><lf>
+ *
+ * After an extension plugin has handled or decided to reject the given AT
+ * command, it must inform ATEXT by HandleCommandCompleted() with a proper
+ * error code.
+ *
+ * @since TB9.2
+ * @param aCmd The AT command to be handled. Its format may vary depending
+ * on the specification. E.g. in BT HFP case, the command may
+ * contain a character carriage return (<cr>) in the end.
+ * @param aReply When passed in, contains the built in answer filled by
+ * ATEXT if it is not empty; when command handling completes
+ * successfully, contains the result codes and responses to
+ * this command; Its ownership always belongs to ATEXT, plugin
+ * may reallocate its space when needed.
+ * @param aReplyNeeded Reply needed if ETrue, no reply otherwise. If EFalse,
+ * the aReply must not contain the reply, otherwise it
+ * must contain verbose or numeric reply (ATV0/1) or an
+ * empty string reply (with ATQ).
+ * @return None
+ */
+ void HandleCommand( const TDesC8& aCmd, RBuf8& aReply, TBool aReplyNeeded );
+
+ /**
+ * Cancels a pending HandleCommand request.
+ *
+ * @since TB9.2
+ * @return None
+ */
+ void HandleCommandCancel();
+
+ /**
+ * Next reply part's length.
+ * The value must be equal or less than KDefaultCmdBufLength.
+ * When the reply from this method is zero, ATEXT stops calling
+ * GetNextPartOfReply().
+ *
+ * @since TB9.2
+ * @return Next reply part's length if zero or positive
+ */
+ TInt NextReplyPartLength();
+
+ /**
+ * Gets the next part of reply initially set by HandleCommandComplete().
+ * Length of aNextReply must be equal or less than KDefaultCmdBufLength.
+ *
+ * @since TB9.2
+ * @param aNextReply Next reply
+ * @return Symbian error code on error, KErrNone otherwise
+ */
+ TInt GetNextPartOfReply( RBuf8& aNextReply );
+
+ /**
+ * Receives unsolicited results. Cancelling of the pending request is done
+ * by ReceiveUnsolicitedResultCancel(). The implementation in the extension
+ * plugin should be asynchronous.
+ *
+ * @since TB9.2
+ * @return None
+ */
+ void ReceiveUnsolicitedResult();
+
+ /**
+ * Cancels a pending ReceiveUnsolicitedResult request.
+ *
+ * @since TB9.2
+ * @return None
+ */
+ void ReceiveUnsolicitedResultCancel();
+
+ /**
+ * Reports NVRAM status change to the plugins.
+ *
+ * @since TB9.2
+ * @param aNvram New NVRAM status. Each call of this function is a result
+ * of DUN extracting the form notified by
+ * CATExtCommonBase::SendNvramStatusChange(). Each of the
+ * settings from SendNvramStatusChange() is separated to
+ * one call of ReportNvramStatusChange().
+ * @return None
+ */
+ void ReportNvramStatusChange( const TDesC8& aNvram );
+
+ /**
+ * Reports about external handle command error condition.
+ * This is for cases when for example DUN decided the reply contained an
+ * error condition but the plugin is still handling the command internally.
+ * Example: in command line "AT+TEST;ATDT1234" was given. "AT+TEST" returns
+ * "OK" and "ATDT" returns "CONNECT". Because "OK" and "CONNECT" are
+ * different reply types the condition is "ERROR" and DUN ends processing.
+ * This solution keeps the pointer to the last AT command handling plugin
+ * inside ATEXT and calls this function there to report the error.
+ * It is to be noted that HandleCommandCancel() is not sufficient to stop
+ * the processing as the command handling has already finished.
+ *
+ * @since TB9.2
+ * @return None
+ */
+ void ReportExternalHandleCommandError();
+
+ /**
+ * Creates part of reply from the global reply buffer to the destination
+ * buffer. Used with APIs which need the next part of reply in multipart
+ * reply requests.
+ *
+ * @since TB9.2
+ * @param aDstBuffer Destination buffer; the next part of reply is stored to
+ * this buffer.
+ * @return None
+ */
+ TInt CreatePartOfReply( RBuf8& aDstBuffer );
+
+// from base class MCmdPluginObserver
+
+ /**
+ * From MCmdPluginObserver.
+ * Creates an AT command reply based on the reply type and completes the
+ * request to ATEXT. Uses iReplyBuffer for reply storage.
+ *
+ * @since TB9.2
+ * @param aReplyType Type of reply
+ * @param aDstBuffer Destination buffer; used for the API requiring the
+ * AT command reply
+ * @param aSrcBuffer Source buffer; used only if aReplyType is EReplyTypeOther
+ * @param aError Completion code. If not KErrNone then other arguments are
+ * ignored and the request is completed to ATEXT with
+ * EReplyTypeUndefined.
+ * @return None
+ */
+ TInt CreateReplyAndComplete( TATExtensionReplyType aReplyType,
+ const TDesC8& aSrcBuffer=KNullDesC8,
+ TInt aError=KErrNone );
+
+ /**
+ * From MCmdPluginObserver.
+ * Creates a buffer for "OK" or "ERROR" reply based on the line settings
+ *
+ * @since TB9.2
+ * @param aReplyBuffer Destination buffer for the created reply
+ * @param aOkReply ETrue if "OK" reply needed,
+ * EFalse if "ERROR" reply needed
+ * @return Symbian error code on error, KErrNone otherwise
+ */
+ TInt CreateOkOrErrorReply( RBuf8& aReplyBuffer,
+ TBool aOkReply );
+
+ /**
+ * From MCmdPluginObserver.
+ * Returns the array of supported commands
+ *
+ * @since TB9.2
+ * @param aCmd Array of supported commands
+ * @return Symbian error code on error, KErrNone otherwise
+ */
+ TInt GetSupportedCommands( RPointerArray<HBufC8>& aCmds );
+
+ /**
+ * From MCmdPluginObserver.
+ * Returns plugin's character value settings (from CATExtPluginBase)
+ *
+ * @since TB9.2
+ * @param aCharType Character's type
+ * @param aChar Character's value matching aCharType
+ * @return Symbian error code on error, KErrNone otherwise
+ */
+ TInt GetCharacterValue( TCharacterTypes aCharType, TChar& aChar );
+
+ /**
+ * From MCmdPluginObserver.
+ * Returns plugin's mode value settings (from CATExtPluginBase)
+ *
+ * @since TB9.2
+ * @param aModeType Mode type
+ * @param aMode Mode value matching aModeType
+ * @return Symbian error code on error, KErrNone otherwise
+ */
+ TInt GetModeValue( TModeTypes aModeType, TBool& aMode );
+
+private: // data
+
+ /**
+ * AT commands handler array. Used for mapping HandleCommand() to
+ * IsCommandSupported() and to limit the number of string comparisons.
+ */
+ RPointerArray<CATCommandHandlerBase> iHandlers;
+
+ /**
+ * Current AT command handler in iHandlers.
+ * Used when IsCommandSupported() detects a matching handler class.
+ */
+ CATCommandHandlerBase* iHandler;
+
+ /**
+ * Buffer for handle command's command
+ * Not own.
+ */
+ const TDesC8* iHcCmd;
+
+ /**
+ * Buffer for handle command reply
+ * Not own.
+ */
+ RBuf8* iHcReply;
+
+
+ /**
+ * Global reply buffer for the AT command replies
+ */
+ RBuf8 iReplyBuffer;
+
+ };
+
+#endif // C_MODEMPLUGIN_H