--- a/usbuis/usbuinotif/loc/usbuinotif.loc	Fri May 14 16:51:51 2010 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,149 +0,0 @@
-/*
-* Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
-* All rights reserved.
-* This component and the accompanying materials are made available
-* under the terms of "Eclipse Public License v1.0"
-* which accompanies this distribution, and is available
-* at the URL "http://www.eclipse.org/legal/epl-v10.html".
-*
-* Initial Contributors:
-* Nokia Corporation - initial contribution.
-*
-* Contributors:
-*
-* Description:  This is a localisation file for usbuinotif. 
-*
-*/
-
-
-// LOCALISATION STRINGS
-
-// *** STRINGS FOR CONFIRMATION QUERIES ***
-
-//d: Memory card needs to be unlocked before it can be used
-//l: popup_note_window
-//w:
-//r: 3.0
-//
-#define qtn_usb_mode_note_memory_card_locked "Memory card needs to be unlocked"
-
-//d: Mass storage memory is not accessible because it cannot be unmounted for some reason
-//d: Softkey "OK" is shown. 
-//l: popup_note_window
-//w:
-//r: 3.2
-//
-#define qtn_usb_mode_note_storage_media_failure "Storage media not accessible"
-
-//d: User disconnects the cable without disconnecting or unmounting it from the PC
-//l: popup_note_window
-//w:
-//r: 3.0
-//
-#define qtn_usb_mode_note_cable_unsafely_removed "Data loss may have occurred. In future, stop file transfers before removing the cable"
-
-//d: While in file transfer mode, the phone receives a card eject event
-//l: popup_note_window
-//w:
-//r: 3.0
-//
-#define qtn_usb_mode_note_mmc_unsafely_removed "Data loss may have occurred. In future, stop file transfers before removing the memory card"
-
-//d: User changes the mode to something from Mass storage mode. Memory card
-//d: might corrupt here so asking for confirmation. Note that the soft keys 
-//d: are labeled as "OK" and "Cancel". 
-//l: popup_note_window
-//w:
-//r: 3.1
-//
-#define qtn_usb_mode_query_change_from_mass_storage "Change USB mode? Storage media may be corrupted if file transfer is ongoing."
-
-
-//d: User tries to use MTP personality without memory card. Since that can be 
-//d: the only media shared via this personality, the connection may be partly 
-//d: or fully unusable. 
-//d: Softkey "OK" is shown. 
-//l: popup_note_window
-//w:
-//r: 3.2
-//
-#define qtn_usb_mode_query_no_memory_card "Memory card is not present. The connection may not work as expected."
-
-//d: The header for USB connected pop-up
-//l: popup_discreet_window_t1
-//r: 5.2
-#define qtn_usb_mode_msg_header "USB Connected"
-
-//d: Too much power error in USB OTG during operating, cable disconnect required
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_current_limit "Error in USB connection. Disconnect device."
-
-//d: Too much power error in USB OTG during enumerating, cable disconnect required
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_too_much_current_required "Unsupported USB device. Disconnect device."
-
-
-//d: Unsupported device error in USB OTG, cable disconnect required
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_unsupported "Unsupported USB device. Disconnect device."
-
-//d: USB hubs are not supported.
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_hub "Hubs are not supported. Disconnect USB cable."
-
-//d: Connection error in USB OTG, cable disconnect required
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_unrecoverable "Error in USB connection. Disconnect cable."
-
-//d: Partially supported warning in USB OTG.
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_warning_partial_support "Partially supported USB device connected. All functionality might not work."
-
-
-//d: Emptry cable error in USB OTG.
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_cable "Remove USB cable or connect a device."
-
-//d: Unknown mass storage  filesystem, disconnect device.
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_error_unsupported_filesystem "Unknown file system. Disconnect device."
-
-//d: General Mass storage error in USB OTG.
-//l: popup_note_window
-//w:
-//r: 5.2
-//
-#define qtn_usb_otg_general_mass_storage_error "General Mass storage error"
-
-//d: Memory not enough or full error
-//l: popup_note_window
-//r: 5.2
-#define qtn_usb_error_memory_not_enough "Memory full. Close some applications and try to connect USB cable again"
-
-// End of USB_OTG
-
-// End of File