diff -r dfdd8240f7c8 -r 7858bc6ead78 usbengines/usbremotepersonality/tsrc/USBRemotePersonalityTest/init/USBRemotePersonalityTest_ats.ini --- a/usbengines/usbremotepersonality/tsrc/USBRemotePersonalityTest/init/USBRemotePersonalityTest_ats.ini Fri May 14 16:51:51 2010 +0300 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,235 +0,0 @@ -# -# Copyright (c) 2006 Nokia Corporation and/or its subsidiary(-ies). -# All rights reserved. -# This component and the accompanying materials are made available -# under the terms of "Eclipse Public License v1.0" -# which accompanies this distribution, and is available -# at the URL "http://www.eclipse.org/legal/epl-v10.html". -# -# Initial Contributors: -# Nokia Corporation - initial contribution. -# -# Contributors: -# -# Description: -# - - -# -# This is STIF initialization file -# Comment lines start with '#'-character. -# See STIF TestFramework users guide.doc for instructions - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Set following test engine settings: -# - Set Test Reporting mode. TestReportMode's possible values are: -# + 'Summary': Summary of the tested test cases. -# + 'Environment': Hardware and software info. -# + 'TestCases': Test case report. -# + 'FullReport': Set of all above ones. -# + Example 'TestReportMode= Summary TestCases' -# -# - CreateTestReport setting controls report creation mode -# + YES, Test report will created. -# + NO, No Test report. -# -# - File path indicates the base path of the test report. -# - File name indicates the name of the test report. -# -# - File format indicates the type of the test report. -# + TXT, Test report file will be txt type, for example 'TestReport.txt'. -# + HTML, Test report will be html type, for example 'TestReport.html'. -# + XML, Test report will be xml type, for example 'TestReport.xml'. -# Note, that xml format is available only when output is set to FILE. -# -# - File output indicates output source of the test report. -# + FILE, Test report logging to file. -# + RDEBUG, Test report logging to using rdebug. -# -# - File Creation Mode indicates test report overwriting if file exist. -# + OVERWRITE, Overwrites if the Test report file exist. -# + APPEND, Continue logging after the old Test report information if -# report exist. -# - Sets a device reset module's dll name(Reboot). -# + If Nokia specific reset module is not available or it is not correct one -# StifHWResetStub module may use as a template for user specific reset -# module. -# - Sets STIF test measurement disable options. e.g. pluging1 and pluging2 disablation -# DisableMeasurement= stifmeasurementplugin01 stifmeasurementplugin02 -# - -[Engine_Defaults] - -TestReportMode= FullReport # Possible values are: 'Empty', 'Summary', 'Environment', - 'TestCases' or 'FullReport' - -CreateTestReport= YES # Possible values: YES or NO - -TestReportFilePath= e:\testing\logs\ -TestReportFileName= USBRemotePersonalityTest_TestReport - -TestReportFormat= TXT # Possible values: TXT, HTML or XML -TestReportOutput= FILE # Possible values: FILE or RDEBUG -TestReportFileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND - -DeviceResetDllName= StifResetForNokia.dll # e.g. 'StifHWResetStub.dll' for user specific reseting - -DisableMeasurement= stifmeasurementdisablenone # Possible values are: - # 'stifmeasurementdisablenone', 'stifmeasurementdisableall' - # 'stifmeasurementplugin01', 'stifmeasurementplugin02', - # 'stifmeasurementplugin03', 'stifmeasurementplugin04', - # 'stifmeasurementplugin05' or 'stifbappeaprofiler' - -Timeout= 0 # Default timeout value for each test case. In milliseconds -UITestingSupport= YES # Possible values: YES or NO -#SeparateProcesses= YES # Possible values: YES or NO (default: NO) -[End_Defaults] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - - - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Module configurations start -# Modules are added between module tags -# tags. Module name is specified after ModuleName= tag, like -# ModuleName= USBRemotePersonalityTestUSBRemotePersonalityTestUSBRemotePersonalityTest -# Modules might have initialisation file, specified as -# IniFile= c:\testframework\YYYYYY -# Modules might have several configuration files, like -# TestCaseFile= c:\testframework\NormalCases.txt -# TestCaseFile= c:\testframework\SmokeCases.txt -# TestCaseFile= c:\testframework\ManualCases.txt - -# (TestCaseFile is synonym for old term ConfigFile) - -# Following case specifies demo module settings. Demo module -# does not read any settings from file, so tags -# IniFile and TestCaseFile are not used. -# In the simplest case it is enough to specify only the -# name of the test module when adding new test module - -[New_Module] -ModuleName= testscripter -TestCaseFile= e:\testing\conf\USBRemotePersonalityTest.cfg -[End_Module] - - -# Load testmoduleUSBRemotePersonalityTest, optionally with initialization file and/or test case files -#[New_Module] -#ModuleName= testmodulexxx - -#TestModuleUSBRemotePersonalityTest used initialization file -#IniFile= c:\testframework\init.txt - -#TestModuleUSBRemotePersonalityTest used configuration file(s) -#TestCaseFile= c:\testframework\testcases1.cfg -#TestCaseFile= c:\testframework\testcases2.cfg -#TestCaseFile= c:\testframework\manualtestcases.cfg - -#[End_Module] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - - - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Set STIF logging overwrite parameters for Logger. -# Hardware and emulator environment logging path and styles can -# be configured from here to overwrite the Logger's implemented values. -# -# Settings description: -# - Indicates option for creation log directory/directories. If log directory/directories -# is/are not created by user they will make by software. -# + YES, Create log directory/directories if not allready exist. -# + NO, Log directory/directories not created. Only created one is used. -# -# - Overwrite emulator path setting. -# + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined -# Logger's path 'D:\\LOGS\\Module\\' with those definition the path -# will be 'C:\LOGS\TestFramework\LOGS\Module\' -# -# - Overwrite emulator's logging format. -# + TXT, Log file(s) will be txt type(s), for example 'Module.txt'. -# + HTML, Log file(s) will be html type(s), for example 'Module.html'. -# -# - Overwrited emulator logging output source. -# + FILE, Logging to file(s). -# + RDEBUG, Logging to using rdebug(s). -# -# - Overwrite hardware path setting (Same description as above in emulator path). -# - Overwrite hardware's logging format(Same description as above in emulator format). -# - Overwrite hardware's logging output source(Same description as above in emulator output). -# -# - File Creation Mode indicates file overwriting if file exist. -# + OVERWRITE, Overwrites if file(s) exist. -# + APPEND, Continue logging after the old logging information if file(s) exist. -# -# - Will thread id include to the log filename. -# + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'. -# + NO, No thread id to log file(s), Example filename 'Module.txt'. -# -# - Will time stamps include the to log file. -# + YES, Time stamp added to each line in log file(s). Time stamp is -# for example'12.Nov.2003 115958 LOGGING INFO' -# + NO, No time stamp(s). -# -# - Will line breaks include to the log file. -# + YES, Each logging event includes line break and next log event is in own line. -# + NO, No line break(s). -# -# - Will event ranking include to the log file. -# + YES, Event ranking number added to each line in log file(s). Ranking number -# depends on environment's tics, for example(includes time stamp also) -# '012 12.Nov.2003 115958 LOGGING INFO' -# + NO, No event ranking. -# -# - Will write log file in unicode format. -# + YES, Log file will be written in unicode format -# + NO, Log will be written as normal, not unicode, file. -# - -[Logger_Defaults] - -#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#' -#NOTE: TestEngine and TestServer logging settings cannot change here - -#CreateLogDirectories= YES # Possible values: YES or NO - -#EmulatorBasePath= C:\LOGS\TestFramework\ -#EmulatorFormat= HTML # Possible values: TXT or HTML -#EmulatorOutput= FILE # Possible values: FILE or RDEBUG - -#HardwareBasePath= D:\LOGS\TestFramework\ -#HardwareFormat= HTML # Possible values: TXT or HTML -#HardwareOutput= FILE # Possible values: FILE or RDEBUG - -#FileCreationMode= OVERWRITE # Possible values: OVERWRITE or APPEND - -#ThreadIdToLogFile= YES # Possible values: YES or NO -#WithTimeStamp= YES # Possible values: YES or NO -#WithLineBreak= YES # Possible values: YES or NO -#WithEventRanking= YES # Possible values: YES or NO - -#FileUnicode= YES # Possible values: YES or NO -#AddTestCaseTitle= YES # Possible values: YES or NO -[End_Logger_Defaults] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - - - -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -# Set filters to be used by ConsoleUI. -# If you want to use filter with ConsoleUI, simply remove comments -# from section below and provide valid filter entries. -# Each filter line has to start with "filter= " keyword. -# Filter can contain special wildcard characters: -# * which stands for none or any literal; -# ? which stands for single character. -# Filters are not case-sensitive. - -#[Filters] -#filter= *math* -#filter= *radio* -#[End_Filters] -# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - -# End of file