webengine/osswebengine/WebKit/WebView/WebFrameLoadDelegate.h
changeset 0 dd21522fd290
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/webengine/osswebengine/WebKit/WebView/WebFrameLoadDelegate.h	Mon Mar 30 12:54:55 2009 +0300
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2003, 2004, 2005 Apple Computer, Inc.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1.  Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer. 
+ * 2.  Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution. 
+ * 3.  Neither the name of Apple Computer, Inc. ("Apple") nor the names of
+ *     its contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#import <Cocoa/Cocoa.h>
+
+@class NSError;
+@class WebFrame;
+@class WebScriptObject;
+@class WebView;
+
+/*!
+    @category WebFrameLoadDelegate
+    @discussion A WebView's WebFrameLoadDelegate tracks the loading progress of its frames.
+    When a data source of a frame starts to load, the data source is considered "provisional".
+    Once at least one byte is received, the data source is considered "committed". This is done
+    so the contents of the frame will not be lost if the new data source fails to successfully load.
+*/
+@interface NSObject (WebFrameLoadDelegate)
+
+/*!
+    @method webView:didStartProvisionalLoadForFrame:
+    @abstract Notifies the delegate that the provisional load of a frame has started
+    @param webView The WebView sending the message
+    @param frame The frame for which the provisional load has started
+    @discussion This method is called after the provisional data source of a frame
+    has started to load.
+*/
+- (void)webView:(WebView *)sender didStartProvisionalLoadForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didReceiveServerRedirectForProvisionalLoadForFrame:
+    @abstract Notifies the delegate that a server redirect occurred during the provisional load
+    @param webView The WebView sending the message
+    @param frame The frame for which the redirect occurred
+*/
+- (void)webView:(WebView *)sender didReceiveServerRedirectForProvisionalLoadForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didFailProvisionalLoadWithError:forFrame:
+    @abstract Notifies the delegate that the provisional load has failed
+    @param webView The WebView sending the message
+    @param error The error that occurred
+    @param frame The frame for which the error occurred
+    @discussion This method is called after the provisional data source has failed to load.
+    The frame will continue to display the contents of the committed data source if there is one.
+*/
+- (void)webView:(WebView *)sender didFailProvisionalLoadWithError:(NSError *)error forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didCommitLoadForFrame:
+    @abstract Notifies the delegate that the load has changed from provisional to committed
+    @param webView The WebView sending the message
+    @param frame The frame for which the load has committed
+    @discussion This method is called after the provisional data source has become the
+    committed data source.
+
+    In some cases, a single load may be committed more than once. This happens
+    in the case of multipart/x-mixed-replace, also known as "server push". In this case,
+    a single location change leads to multiple documents that are loaded in sequence. When
+    this happens, a new commit will be sent for each document.
+*/
+- (void)webView:(WebView *)sender didCommitLoadForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didReceiveTitle:forFrame:
+    @abstract Notifies the delegate that the page title for a frame has been received
+    @param webView The WebView sending the message
+    @param title The new page title
+    @param frame The frame for which the title has been received
+    @discussion The title may update during loading; clients should be prepared for this.
+*/
+- (void)webView:(WebView *)sender didReceiveTitle:(NSString *)title forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didReceiveIcon:forFrame:
+    @abstract Notifies the delegate that a page icon image for a frame has been received
+    @param webView The WebView sending the message
+    @param image The icon image. Also known as a "favicon".
+    @param frame The frame for which a page icon has been received
+*/
+- (void)webView:(WebView *)sender didReceiveIcon:(NSImage *)image forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didFinishLoadForFrame:
+    @abstract Notifies the delegate that the committed load of a frame has completed
+    @param webView The WebView sending the message
+    @param frame The frame that finished loading
+    @discussion This method is called after the committed data source of a frame has successfully loaded
+    and will only be called when all subresources such as images and stylesheets are done loading.
+    Plug-In content and JavaScript-requested loads may occur after this method is called.
+*/
+- (void)webView:(WebView *)sender didFinishLoadForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didFailLoadWithError:forFrame:
+    @abstract Notifies the delegate that the committed load of a frame has failed
+    @param webView The WebView sending the message
+    @param error The error that occurred
+    @param frame The frame that failed to load
+    @discussion This method is called after a data source has committed but failed to completely load.
+*/
+- (void)webView:(WebView *)sender didFailLoadWithError:(NSError *)error forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didChangeLocationWithinPageForFrame:
+    @abstract Notifies the delegate that the scroll position in a frame has changed
+    @param webView The WebView sending the message
+    @param frame The frame that scrolled
+    @discussion This method is called when anchors within a page have been clicked.
+*/
+- (void)webView:(WebView *)sender didChangeLocationWithinPageForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:willPerformClientRedirectToURL:delay:fireDate:forFrame:
+    @abstract Notifies the delegate that a frame will perform a client-side redirect
+    @param webView The WebView sending the message
+    @param URL The URL to be redirected to
+    @param seconds Seconds in which the redirect will happen
+    @param date The fire date
+    @param frame The frame on which the redirect will occur
+    @discussion This method can be used to continue progress feedback while a client-side
+    redirect is pending.
+*/
+- (void)webView:(WebView *)sender willPerformClientRedirectToURL:(NSURL *)URL delay:(NSTimeInterval)seconds fireDate:(NSDate *)date forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didCancelClientRedirectForFrame:
+    @abstract Notifies the delegate that a pending client-side redirect has been cancelled
+    @param webView The WebView sending the message
+    @param frame The frame for which the pending redirect was cancelled
+    @discussion A client-side redirect can be cancelled if a frame changes location before the timeout.
+*/
+- (void)webView:(WebView *)sender didCancelClientRedirectForFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:willCloseFrame:
+    @abstract Notifies the delegate that a frame will be closed
+    @param webView The WebView sending the message
+    @param frame The frame that will be closed
+    @discussion This method is called right before WebKit is done with the frame
+    and the objects that it contains.
+*/
+- (void)webView:(WebView *)sender willCloseFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:didClearWindowObject:forFrame:
+    @abstract Notifies the delegate that the JavaScript window object in a frame has 
+    been cleared in preparation for a new load. This is the preferred place to set custom 
+    properties on the window object using the WebScriptObject and JavaScriptCore APIs.
+    @param webView The webView sending the message.
+    @param windowObject The WebScriptObject representing the frame's JavaScript window object.
+    @param frame The WebFrame to which windowObject belongs.
+    @discussion If a delegate implements both webView:didClearWindowObject:forFrame:
+    and webView:windowScriptObjectAvailable:, only webView:didClearWindowObject:forFrame: 
+    will be invoked. This enables a delegate to implement both methods for backwards 
+    compatibility with older versions of WebKit.
+*/
+- (void)webView:(WebView *)webView didClearWindowObject:(WebScriptObject *)windowObject forFrame:(WebFrame *)frame;
+
+/*!
+    @method webView:windowScriptObjectAvailable:
+    @abstract Notifies the delegate that the scripting object for a page is available.  This is called
+    before the page is loaded.  It may be useful to allow delegates to bind native objects to the window.
+    @param webView The webView sending the message.
+    @param windowScriptObject The WebScriptObject for the window in the scripting environment.
+    @discussion This method is deprecated. Consider using webView:didClearWindowObject:forFrame:
+    instead.
+*/
+- (void)webView:(WebView *)webView windowScriptObjectAvailable:(WebScriptObject *)windowScriptObject;
+
+@end